JUMO 70 used machines

Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature monitor, thermostat -Manufacturer: Jumo, temperature monitor -Type: TB 0 -System outputs: AC 110..240 V -Dimensions: 125/22/H110 mm -Weight: 0.2 kg

Auxiliary switch, automatic circuit breaker, fuse, line switch, line circuit breaker, thyristor circuit breaker -Manufacturer: Jumo, thyristor power switch unused OVP -Type: TYA32-45/50.530 -Number: 2x switches available -Price: per piece -Dimension box: 60/50/H35 mm -Weight: 0.1 kg

Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature limiter, electronic temperature controller -Manufacturer: Jumo, temperature controller type GROw-48/2a -Temperature range: °C -Dimensions cardboard: 210/150/H90 mm -Weight: 0.8 kg

Inductive conductivity transmitter -Type: 2 AMLid-184 -Sensor immersion depth: 1115 mm -Total length: 1337 mm -Weight: 3 kg

Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter -Type: TB 0 -System outputs: 20..30 V -Quantity: 2 available -Price: per piece -Weight: 0.2 kg

Motor Perkins 704.30 # UA80973U857134J completely overhauled replacement engine incl.3.PTO finish without starter + alternator, flywheel. All wear parts renewed incl. Engine test run. 12 months warranty

Transnorm Rising falling Incline with arch belt conveyor GF 7200+700-700-600 RA2201 Technical data: Conveyor length (NL): 7900 mm ( 7200 mm incline + 700 mm arch ) frame width (NB): 700 mm, 8000 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 7900 ( 7200 + 700 ) Nominal / outside width in ...

-High-speed stacking and banding delivery to work behind any folder or other finishing machine with 1, 2 or 3 up banding capacity -Year 2001 -Maxi size 760x330 mm -Min size 335x235 mm -Bundle Delivery -Jogging station -Pressing station -Delivery table, good working conditions -Max. width 760 mm - 1 use -Max. width 335 mm - 2 use -Max. width 235 mm - 3 use -Max. length 305 mm -Package height 20 - 150 mm -Available immediately

Transnorm belt curve conveyor left 90°-700-500-IR900 RA1967 Technical data: Frame width (NB): 700 mm belt width (GuB): 500 mm height (BH): 220 mm height including motor (MH): 480 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees Conveying speed (v m/s) Drive: SEW gear motor Electrical data: 50Hz V230/400, kW 0.37 / S1 Belt:KT58, wear see pictures Year of construction: 1997 Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1997 condition: gut Nominal / inner radius in mm: 900 Nominal / outside width in mm: 700 Belt width in mm: 500 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 scope of delivery: ohne Frequenzumrichter, without supports and side guides If you need other dimensions or individual ...

impression count 143 MÄ°O, Sheet-fed offset press - Printing units: 5 + lack unit. Perfecting 2-3/5-0, High pile delivery Per requirement Kw 00 approx, Weigh 49.350 Kg. circa, Accessories included:, - Steel plate on feeder, - Stream feeder with vacuum belts, - Preset (autom. paper size and thickness setting), - Electronic double sheet detection, - Electromechanic double sheet detection, - Electronic side lay control, fotoelectronic and akustic, - Anti-static on feeder and delivery, - RCI machine control and diagnosis by monitor console /self diagnostic, control and monitor console; remote inking; dampening; axial, circumferential and diagonal register control with light pen; day light illuminator and memory card for job memories, - ColorPilot D- quality control, - APL™ automated plate changing, - Rolandmatic continuous dampening system with alcohol metering; cooling and re-circula ...

2025 BIG backhoe bucket 70cm with MS03 Symblock attachment, Technical specifications:, - Weight: 103 kg, - Recording width: 70 cm, - Contents: 149 liters, - CAT 3 - suitable for 2.8 - 3.9t excavators

2025 BIG backhoe bucket 70cm with MS08 Symblock attachment, Technical specifications:, - Weight: 210 kg, - Recording width: 70 cm, - Contents: 293 liters, - CAT 5 - suitable for 5.6 - 9t excavators

2025 BIG backhoe bucket 70cm with OQ45 attachment, Technical specifications:, - Weight: 215kg, - Recording width: 70 cm, - Contents: 293 liters, - CAT 5 - suitable for 5.6 - 9 t excavators

For sale is a high-precision 3D coordinate measuring machine (as new) of the KEYENCE VL-700 / VL-770 series. The device was purchased in 11/2023, is in excellent condition and has been used exclusively in laboratory conditions. Technical Highlights & Details: • Model: KEYENCE VL-700 / VL-770 (VL-700 Series) • Year of construction: 2023 • Measurement method: Optical 3D surface detection with automatic 360° all-round measurement • Measuring principle: Projection of structured light patterns with a high-resolution CMOS camera • Capture: Complete 3D digitization of complex geometries without manual probing • Condition: Well maintained, fully functional, ready to use • Accessories: Incl. control computer, KEYENCE software package, calibration standard and original accessories ________________________________________ Pros: • Extremely easy to use ("place and  ...

Pallet lift table for industrial and Euro pallets, lifts whole pallets of frozen blocks to an ergonomic working height, enabling quick and injury-free operation for the machine operator., Pallet lift table for industrial and Euro pallets, Load capacity: 1,000 kg, Dimensions / weight: L x B x H: 1.850x1.230x2.180 mm, Weight: 520 kg

cardan shaft, cardan shaft, universal joint shaft, drive shaft -Cardan shaft:Cardan joint shaft with length compensation and double joint on both sides -Dimensions retracted: 700 mm -Flange: bolt circle Ø 52 x 6 mm -Flange: outside Ø 65 mm -Sliding length: see photos -Total dimensions: Ø 65 x 700 mm -Weight: 4 kg

Format: 740 x 1040 mm<br><br><br><br>br>Verf Gbar: Short-term

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Krauss Maffei hose pouring machine type: KM 110-700 C1 control: MC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 110 cross-beam measures mm: 470 installation height min / max. mm: min 300 record sizes: 745 x 770 hose unity snail diameter mm: 50 hose weights gr: 343 hose volumes cm?: 377 hose pressure cash: In 1892 mass and weights dimensions LxBxH m: 4.6 x 1.4 x 2.1 machine weights kg: 7000 other 2 x nuclear train, accumulator, new hydraulic tubes, Hydromotor anew. Heisskanal 4 zones

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 7,000 litres double-walled used, with a new diesel pump Vision 60 The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 Diesel pump Vision 60 (new) . Flow rate approx. 50 LTR/min . Hose length 4mtr can be extended. Container dimensions Length 3,710 mm Diameter 1600 mm Weight approx. 1,500 kg Of course, you can also use your tank system. All our tank systems are used in our company by selected employ ...

Rubberized, encapsulated vibrating channel with 2 outlets and 3 inlets of 200 mm , with 2 unbalance rs of 1.8 kW / 960 UPM. Rinne was used to press up 2 side-by-side Mogensen-Sizern.

The laser device series NBL, consistently adaptable to your needs, allows you this economic and durable engraving of single pieces and small series, directly from the computer. Ideally suited for medical instruments, devices and transplants. No consumables. In a special process you can even mark glass - instant - durable. So, you can mark on your products easy and flexible variable data, for example a 2D barcode, or QR code in the highest quality. Also plastics are possible, like E.g. an attractive customer card, with photo or graphics, in brilliant quality. Laser marking is resistant to abrasion, penetrates deep into the material and thereby effectively resists tampering attempts and adverse effects due to environmental influences, to a large extent. Only a standard PC (not included) is required for the Operation where the software supplied is running to operate the laser.  ...

Engel injection moulding machine Type: 7050/1500 duo, with Angel ERC 84 2 CL robot control: CC100 year: 2000 Clamping unit Clamping force t: 1500 opening stroke mm: 2350 Holm dimension mm: 1530 x 1275 min/max height mm: 700/1465 Plate size: 2340 x 2040 injection unit Screw diameter mm: Gr 90 injection weight: 2900 Injection volume cm 3: 573 spray pressure bar: 2300 Dimensions and weights Dimensions Lxwxh m: 12 x 3.7 x 2.9 machine weight kg: 63,000/30,000 Miscellaneous 5 core moves 5 specialist cascade tire. Valve gate Angel ERC 84 2 CL robot

Krauss Maffei Type: KM 140-700 C3 Sprinter, with IML Robot Control: MC 4 Built: 2000 Closing unit Clamping force t: 140 Holm size mm: 470 x 470 Installation height min/max mm: 300 plate size: 745 x 770 Spraying unit Screw diameter mm: 50 Spray weight gr: 346 Spray volume cm3: 377 spray pressure bar: 1892 Dimensions and weights Dimensions LxWxH m: 4.8 x 1.8 x 2.2 Machine Weight Kg: 6800 Other with IML Robot 2 Cover, Euromap 12