28 IXION used machine for sale

Details: Travels: X-axis: 2000 mm, Y-axis: 800 mm, Z-axis: 1000 mm Number of Controlled Axes: 4 Tool holder: SK 40 Tool Positions: 24 Table size: 1500 x 1000 mm Control: Mitsubishi M 530 Defects: - C-axis not common Note: - Machine is without mounts etc.

IXION TL 1001 CNC Deep Hole Drilling Machine with Equipment Year of construction 2008 Control MITSUBISHI M530 Machine number 950521 Drilling depth (Z) CNC controlled 1,000 mm Drilling unit (Y) vertically movable 800 mm Table area 1,200 mm x 700 mm Table load 3,000 kg Longitudinal travel of the table (X) 1,000 mm Movability of the table (W) 1,000 mm Table can be rotated 360° Spindle SK 40 Spindle speed 100 – 4,000 rpm Max. drilling capacity in steel 25 mm Max. threading in steel M20 Milling in steel is possible Weight approx. 3,500 kg Equipment: Compact Belt Filter KBF Electronic handwheel Coolant Setup Chip conveyor KBF 270 P50 Included in delivery: Deep Hole Drilling Tools Workplace with: Holders / Mounts / Supports / Sealing Washers Operating Instructions/Documentation Machine parameters on storage medium More photos as well as PDF with equipment ...

Offer 24320 Specifications: - Drilling capacity - in steel 13 mm - - in aluminium 15 mm - Drilling spindle holder MK 1 - Drilling depth 70 mm - Projection spindle / column 180 mm - 5 drilling spindle speeds 480 - 4000 rpm - Drive 400 V / 0.45 kW - Height adjustment Drilling table with T-slots 250 x 220 mm - Distance between drilling spindle / table approx. 270 mm - Machined base plate with T-slots 170 x 170 mm - Space requirement approx. W 400 x H 700 x D 500 mm - Weight approx. 100 kg - with keyless chuck 1 - 13 mm

Make IXION Type: BST16 Drilling capacity in steel (diameter) 3 - 16 mm Clamping height max. 1500 mm Weight 300 kg Max. clamping height: 1,500 mm Machine weight: 300 kg Drilling capacity: for ST 60: 3.5 mm - 16 mm Ø for GG-20: 3 mm - 16 mm Ø

Drilling capacity steel/GG: 23 mm Spindle holder: 3 MK Projection: 275 mm Table size: 300 x 400 mm Quill stroke: 90 mm Spindle speeds: 100 - 1180 rpm Feeds: 0.1/0.6/0.25 mm Drive motor: 380 V, 1.25/2.15 kW Dimensions: 850 x 400 x 1770 mm Weight: 280 kg

Max Drilling diameter : 46 mm Max Drilling depth: 1000 mm Table dimensions: 1200 x 700 mm x mm Spindle speed 4000 rpm Spindle power: 7.5 kw

Machine Details Warehouse number 1105-03722 Machine type Deep hole drilling machine Make IXION Type TL 500 SVA Year of construction 1985 Control type CNC Control CNC Bosch Alpha Storage location HAGUENAU Country of origin GERMANY Delivery time immediately Freight base from stock Technical details Core drilling diameter - max. 1.5 - 18 mm Drilling depth 600 mm Clamping table, rigid 700 x 1,350 mm Clamping surface of the rotary table 1,000 x 500 mm Longitudinal movement of the table 600 mm Table displacement in drilling direction 400 mm Table rotatable 180 ° Vertical adjustment of the drill carriage 250 mm Drilling unit swivel +/- 15 ° Spindle cone MK 3 Number of speeds 8 Speed range 240 - 2,400 rpm Control CNC Bosch Alpha Motor power 1.0 / 1.6 kW Total power requirement 10 kVA Machine weight approx. 1.35 t Space requirement approx. 2.0 x 1.5 x 1.8 m Infor ...

4 axis deep hole drilling machine Brand: Ixion mod. TL1400 Year: 1996/1997 Mitsubishi M530 H control system Executions and Racing Sleeve TL 604 (Z) 600 mm. Sleeve TL 1004 (Z) 1000 mm. Operating unit for vertical drill (standard) (Y) 400 mm. Operating unit for vertical drill (option) (Y) 800 mm. Cross table (table surface 1375 mm. X 700 mm.) (X) 700 mm. Cross table (table surface 1675 mm. X 700 mm.) (X) 1000 mm. Mobile column in the boring direction (W) 1100 mm. Circular table (option) (B) 360 ° Work table Table surface (standard) 1375 mm. X 700 mm. Table surface (optional) 1675 mm. X 700 mm. Load on the table max 2000 kg. Bridge Tool SK 40 holder according to DIN 69871 Tightening bolts according to DIN 69872 Main spindle AC drive (3.0 kW) at 100% of the insertion ratio, S1 3.0 Kw 50% of the duty cycle, S6 5.5 kW Spindle speeds directly programmable 100- ...

High performance column boring machine Technical data: - Drilling capacity in steel ST 60 32 mm - Thread cutting device up to M 20 - Drilling spindle holder MK 3 - Feeds 0.1 + 0.2 + 0.3 mm/U - Drilling spindle stroke 150 mm - 12 drilling spindle speeds 80 - 1400 rpm - Extension 280 mm - max distance table - drilling spindle 760 mm - Table with 2 T-slots 550 x 400 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.4 / 2.3 kW - Space requirement approx. W 550 x H 1950 x D 850 mm - Weight approx. 360 kg - with: - coolant device - Quick-release drilling chuck - 20 pcs. HSS div. Drill 8 - 25 mm

Technical data: -Drilling capacity approx. 30 mm - spindle mount MT 3 -Spindle speeds in 2 steps continuously variable 80-1400 RPM -Table surface 390 x 420 mm -Drill unit by hand crank height adjustment -min / max distance table / spindle 220 / 580 mm -Drilling spindle stroke 150 mm -Spindle projection powered 280 mm â 400 V / 1.3 / 2.3 kW -Space requirement approx. B 480 x H 880 - H 1200 X 1050 mm -Weight approx. 250 kg -Table base with storage space B 600 x h. 910 x H 800 mm -Weight 200 kg

Table drilling machine Ixion without base from a training workshop Type BT15STP stepless speed control via PIV gearbox Hoehen adjustment via rack, Speeds from 200rpm to 3,600rpm Flott Alzmetall Maxion Gillardon Special price

Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine -Spindle mount: B10 -Table size: 770 x 300 mm -Max. Intermediate dimension: mm -Projection: 200 mm -Speeds: 250-4000/365-4150 rpm -Spindle stroke: 100 mm -Dimensions: 960/970/H1600 mm -Weight: 510 kg

drilling diameter: 18 min drilling capacity diameter max.: 15 mm bore depth: 90 mm throat: 215 mm spindle: bis 360 mm spindle: 560 mm table plate: 350 x 290 mm column diameter: 75 mm Total height: max. 1050 mm weight: ca. 100 kg spindle turning speed - stepless: 100 - 1800 U/min motor speeds:: 700 / 1400 U/min Pole-changing motor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32.0 mm bore capacity in cast iron: 36.0 mm throat: 280 mm bore stroke: 150 mm turning speeds: 80 - 1400 U/min table-size: 400 x 550 mm morse taper: MK 3 feed: 0.1-0.2-0.3 mm/U total power requirement: 1.1 / 2.0 kW weight of the machine ca.: 350 kg range L-W-H: 800 x 600 x 1900 mm Furnishing : - Column drilling machine - Drive: V-belt - automatic spindle feed (0.1/0.2/0.3 mm/rev) - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Connection cable + 16A plug Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9103736 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table, Drilling and Tapping Machine IXION Type BT 15 GLMasch. No. Year of construction approx. 1975Drilling capacity 15 mmSpindle holder Cone holder B 16Threading from M 2.5 to M10Throat depth 200 mmPine stroke 90 mmTable size 285 x 220 mmColumn diameter 75 mmSpindle speed 320 - 1600 rpm. 4 stagesMotor power 0.55 kWNet connection 380 volts, 50 Hz- Spindle speed via 4 V-belt steps- equipped with FAHRION GH 10 tapping chuck- with guide cartridge for the thread pitch, operation without

bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 170 mm : 4 speeds: 70 - 1400 U/min table-size: 600 x 450 mm total power requirement: 3,0 kW weight: 350 kg dimensions: 1200 x 800 x 2150 mm Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360°  ...

bore capacity in steel (diameter): 3 - 16 mm : max. 1500 mm weight: 300 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bench drill, bench drill, column drill, pillar drill -Manufacturer: Ixion, bench drill type BT 6 -Clamping table: 290 x 225 mm -Travel: 150 mm -Spindle mount: drill chuck -Projection: 180 mm -Speeds: 1080 - 12000 rpm 8 levels -Column: diameter 75 mm -Spindle stroke: 60 mm, with fine stop -Motor: AEG 0.37 / 0.6 kW -Voltage: 380V -Dimensions: 640/330 / H740 mm -Weight: 92 kg

bore capacity in steel (diameter): 16 mm throat: / mm bore stroke: / mm total power requirement: / kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: . bore capacity in steel (diameter): . mm bore stroke: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: 215 mm thread: M2 - M10 : 1800 Gew./h thread depth max.: 60 mm spindle: MK 2 bore depth: 90 mm : 150 bis 450 mm : 220 x 285 mm column diameter: 75 mm mm Total height: 950 mm motor speeds:: 700 / 1400 1/min weight of the machine ca.: 95 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tischbohrmaschine / Drilling machine IXION BST 13 Baujahr / Year 1971 - Serial-No. 37919 Technical Details: Abmessungen / Dimensions 220 x 400 x 820mm Gewicht / Weight 50kgs Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

bore capacity in steel (diameter): 23 mm throat: 270 mm bore stroke: 110 mm taper MK: 3 MK table-size: 400 x 385 mm feeds: mm/U turning speeds: 135 - 825 U/min total power requirement: 0,9 KW weight of the machine ca.: 0,25 t dimensions: 1,2 x 0,8 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table surface area: 170 x 170 mm base plate surface area: 170 x 170 mm throat: 185 mm quill stroke: 65 mm spindle turning speed range: 500 / 896 / 1473 / 2428 U/min column diameter: 65 mm total power requirement: 0,37 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity: 0 mm Drilling depth: 0 mm Spindle taper: 0   Number of heads: 0   CNC Brand: 0 CNC Model: 0 Control: ELAU PT1 Technical data Max. drill depth: 600 mm Drill capacity in steel: up to diameter: 18 mm Spindle stroke: 600 mm Table length: 1375 mm Table width: 700 mm rotatable: 360 ° Max. loading: 2000 kg Longitudinal travel (X-axis): 700 mm Transversal travel (y-axis): 500 mm Spindle speeds: up to: 4000 rpm Spindle nose SK: 40 Voltage 50 Hz 3x: 380 Volt Spindle motor: 2.3 kW Machine´s weight about: 2800 kg Overall dimensions machine: Length: 4500 mm Width: 1800 mm Height: 2700 mm Various accessories: Drill chuck with internal cooling Digital readout number of axis:: 2 Coolant system

Drilling capacity: 0 mm Drilling depth: 0 mm Spindle taper: 0   Number of heads: 0   CNC Brand: 0 CNC Model: 0 Control: IXION Technical data Number of drill spindles: 1 from diameter: 3 mm up to diameter: 25 mm Table length: 1375 mm Table width: 700 mm Max. loading: 2000 kg Travels: X axis: 1000 mm Y axis: 800 mm Z axis: 1000 mm Spindle speeds: stepless from: 100 rpm up to: 4000 rpm Spindle nose SK: 40 Power: 7.5 kW Machine´s weight about: 8000 kg Overall dimensions machine: Length: 6600 mm Width: 4000 mm Height: 2300 mm Various accessories: Coolant system Chip conveyor

bore capacity in steel (diameter): 23 / 28 mm throat: 260 mm bore stroke: 120 mm tool taper: MK 3 table-size: 500 x 350 mm column diameter: 100 mm total power requirement: 1,3 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 800 x 600 x 1750 mm Defective feed! Right-left rotation stepless speed adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.