used IMA advantage

Manufacturer: IMA , Type: Advantage 5620, Year: 2001, Program: IMA, Control: IMA, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 70-1300, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 45, Min-max feed m/min: ca. 20, Premilling: yes, IR zone: yes, Lasertechnik: yes, Kw-Leistung Laser: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: yes, Grooves, slewable-controlled: yes, Type of scraper: yes, Cleaning nozzles: yes, Edge sanding: yes, Profile sanding top bottom: Rolle, Roller/belt: 6, Year :2001

Manufacturer: IMA, Type: Advantage 8200, Year: 2003, Min-max edge material mm: 0,4-20, Work piece width min-max mm: min. 60, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 4-20, Premilling: yes, Mitre stations: yes, Radius scraper: yes, Flat scraper: yes, Profile sanding top bottom: yes, Weight approx. kg: 4400, Year :2003

Description: - Edge banding machine - Serial number 02352 - Total installed power 21 KW - Edge thickness from 0.40 mm up to 12 mm - Workpiece thickness from 10 mm to 45 mm - Minimum workpiece length 150 mm - Feed motor 2.20 KW - Control system - IMA 08.376 joint trimming unit, 2 x motor 3 KW-12000 rpm - IMA 283.08 Gluing unit with pot for granulated hot melt adhesive - Pressure unit with (1+5) rollers - IMA 08.415 Cross-cut unit, 2 x motor 0.66 KW-11100 rpm, swivels up to 8° - IMA 08.0555 Rough trimming unit, 2 x motor 1.80 KW-12000 rpm (upper motor missing) - IMA 08.346 Profile trimming unit, 2 x motor 0.50 KW-18000 rpm - IMA 08.519 Profile scraper unit - Flat scraping unit - Milling unit, motor 2 KW-12000 rpm - IMA 08.612 Edge buffing unit, 2 x motor 0.25 KW-1320 rpm IMPORTANT: The return system shown in the photos is NOT included in the scope of delivery Approx. Onsite Dimension.  ...

Machine with full equipment: Add Glue up to 15 mm Flat saws Preliminary vessels Chamfer milling Rounding threads and corner copying Grinding unit Flat and rounding drawing blade Smooth with return belt

Chain plates (used) Serial No.: IMA -with rubber plate and mounting bracket -Dimensions: 80 x 60mm -more than 100 PCs available Price per piece: 4,50 euro + VAT

Milling / Beveling aggregate Serial No.: IMA -for double-sided edge banding machine (1 Unit left right side page / 1 units)

Banding and full single wrap wrapping machine Performance: max 60 cycles / min, machine weight: 1,400 kg, dimensions: approx. 2500 X 1,200 X 2,000 mm (L X W X H)

Glue tank with rollers for sanding machine IMA

Glue application machine for sanding machine IMA

IMA-PG TR100 blister machine for tablets and capsules in PVC/Alu blisters, output up to 140 blisters per minute. Blister size range from 30 x 60mm up to 128 x 150mm, and up to 12mm deep, currently fitted with tooling for blisters 60 x 140mm. With Laetus checking system. With Multipack F42 blister stacker & stretch bander, up to 40 stacks per minute.

The Solid wall pan , with no perforations , makes it possible to process all sizes and shapes of product without clogging . The shape , combined with the surface smoothness , bring a perfect mixing of the cores and a uniform distribution of the coating material . An exclusive , patented drying system . Two paddles immersed in the core bed guarantee that the drying air is conveyed directly through the tablet mass, thus avoiding swirls and turbulence inside the pan. Either blowing or exhausting paddles can be used, depending on the process requirements. e use of different sizes of paddles guarantees high flexibility in terms of pan working capacity. Spray guns : Both Sugar and Film spray guns can be easily fitted on the sliding support arm, which can be rapidly removed from the front door of the pan, allowing their calibration/adjustment and fast, safe cleaning and sanitizing operations. T ...

Pop Glace (Frozen pop) pleine entière fabrique des batons of glace. Usine d'Occasion entière pour liquide le entièrement rénové. Chaque machine avec 4 ou 5 ou 6 voies jusqu' à l'exigence du client. Piece mécanique rénovée. Partie entièrement rénovée avec électrique the plupart des composants PANASONIC, PLC, écran tactile, photocellule électrique pour Spot. The peut être variable length juste sur l' écran tactile. L'usine est compoused avec 3 machines pour production: 15,000 PCs par heure pour une longueur autour de 280 mm. Nous pouvons également fournir les réservoirs de mélange et aussi le système pour ajouter the couleur et saveur dans chaque pop de glace (moins d'investissement). Les photos sont pour une machine similaire entièrement rénovée. Nous pouvons également vous conseiller sur le film.

Fischer Imaging Mammotest Plus S with: Mammotome SCM 23 (biopsy) Tube Varian M-147 SP 0.1/0.3 complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patien ...

Used IMA coating pan, type HTM 300. Pharmaceutical version. Manufacturer's documentation.

2 pieces available For more information, please refer to the enclosed photos.

Unwinding reel / decoiler â?¢ Bandwidth / strip width max. 1,500 mm â?¢ Tape thickness / strip thickness (430 N/mm2) 0.5-2.0 mm â?¢ Coil outer diameter / coil outer - 1,300 mm â?¢ Coil inner diameter / coil inside - 470-520 mm â?¢ Coil weight / coil weight 10,000 kg â?¢ Side shift / side shift . . . . . . . . . . . . . . . . .

Edge Bander Make: IMA Model: Compact / U / F / DV / MFA 6212 Built. 1999 Edge height: 14 - 55 mm Edge thickness: 0.4 - 12 mm Plate thickness 10 - 50 mm Min plate width: 60 mm Min plate seam: 150 mm Feed: 12 m/min Total length: 7200 mm Weight: 4000 kg Facilities Joining unit / pre-milling / 2 x 3 KW Glue unit for hot melt adhesive or PU (PU melter for cartridge) Cross-cut unit / swivel 5° Milling unit / flush milling Multi-machining unit / mould milling unit / corner copying / upper longitudinal edge Multi-machining unit / mould milling unit / corner copying / lower longitudinal edge Pull blade unit / profile drawing blade Pull blade unit / flat drawing blade Edge grinding unit / oscillating Swivel unit / top - bottom / swivel

Edge gluing machine Manufacturer: IMA Model: Compact 508 Built: 1988 Facilities - Caps - Flush milling - Forming milling units - Radius/Chamfer milling - Corner machining - Pulling blade - Schwabbelaggregate

IMA BFB MS300A collator and stretch bander for cartons Carton Size range: minimum 65 x 20 x 12 mm, max. 160 x 95 x 95 mm Bundle size range: minimum 65 x 80 x 30 mm, max. 180 x 320 x 160-210 mm (push-in width x depth x height) Maximum reel diameter 300mm, reel core diameter 70-76mm Includes discharge rake to remove bundles from the machine (prevents heating the product) Siemens S7-300 PLC with UniOP HMI Capacity up to 40 bundles per minute 6 bar compressed air Footprint 2865 x 1265mm approx. x 1945mm high Weight approx 1500kg.

Table size X 5300 Y 1300 mm 800 mm wide waste outfeed conveyor 2 CNC Z axes Drilling head with 21 vertical drill spindles and 4x2 horizontal drill spindles with integrated grooving saw rotatable through 90° Extraction shoe for the vertical drill spindles and chip & dust extraction of the horizontal spindles integrated in the drilling head 10 kW main spindle, vector-controlled a 3600 C axis, fully interpolating

Edgethickness: 0,3 - 20 mm Edge height: 14 - 65 mm Edge length: minimum 160 mm Feedrate: 6 - 30 m/min Workpiece thickness: 8 - 60 mm Workpiece width: minimum 65 mm Workpiece length: minimum 150 mm

The monoblock F87 is an automatic intermittent movement machine that can perform three operations at the same time: a volumetric filling and two closures. Aqueous, alcoholic, sugary, foamy, viscous products can be given. Droppers, glass or plastic pipettes, nebulizers, normal or freeze-drying rubber caps can be introduced. You can apply screw caps, press caps, ferrules, PFP etc. The carter and the machine table, on which all the operating groups are fixed from the inside, are in AISI 304 stainless steel and protect the mechanical parts from the infiltration of the treated products and the water used for washing. The operating units and their supports are made of AISI 304 stainless steel and receive their motion from a single variator motor, obtaining the dual purpose of relating, without interruption, the speed of the machine with the rotation speed of the screwing or seaming, and not to ...

Stretch wrapping machine IMA model: MS300AM

Technical data : Bandwidth / strip width 1,500 mm Strip thickness / strip thickness (420 N/mm2) 0.5 - 2.0 mm Coil weight 7,000 kg Longitudinal sections • 2 mm: 4 pcs. • 1.5 mm: 8 pcs. • 0.6 mm: 10 pcs. Shranded. / speed 20 m/min Length tolerance / length tolerance ± 0.5 mm Power / power 19.5 kW

specifications: Up to 400 PCS/MIN, 8 sealing heads, continuous rotary sealer. Vial diameter (mm) DF: Min 14, Max 52. Vials height (mm) HF: Min 35, Max 110. Cap diameter (mm) DC: Min 13, Max 33. Cap height (mm) HC: Min. 6, Max. 16. Power: up to 400 rpm. Standard voltage: 400V - 50 Hz.