used HYFRA vwk

Cooling unit (chiller) - HYFRA VWK 30/1 (4 pcs.) Year of construction: * Description: The device is in very good condition Cooling capacity approx. 10 kW Refrigerant R 407C The device has: - Compressor - own container for medium - Circulation pump - 1 x Cooler - Heat exchanger - 1 x fan The device after maintenance, fully functional with new refrigerant 3-month in-service guarantee in Poland Price: On request

Country of origin: Germany, Weight: 200

Industrial cooling system , Cooling capacity 3000 kcal/h , 24 bar ,380 V , 50 Hz , 4,9 A , 2,5 kW

Description: Refrigerant R407C , Refrigerant quantity 0.45 kg Approx. Onsite Dimension. (l x w x h): 700 x 600 x 400 mm, weight approx.: 40 kg

Refrigeration unit for cooling spot welding machines and rolling scaffolds.Cooling capacity 5,500 watts

Four Hyfra TRK90-ÖF-S are available, cooling capacity: 11.6kW, max. ambient temperature: 42°C, connected load: 9.8/11.3kW, weight: 170kg.

Ref.-No. 00752 Name of the installation Cooling system Manufacturer Hyfra Industriekühlanlagen GmbH Model SVK 360 – 1 – S Year of construction 2005 Cooling capacity 47300 (W) (kJ h) Ambient temperature max +40 C Admissible operating pressure pmax 29.5 bar Refrigerant R 407 c Quantity of refrigerant 12 kg Voltage 3 / PE – 400 (V) U Frequency 50 Hz Operating current 40.9 A Connected load 24.7 kW Preliminary fuse max 50 A Weight 640 kg Weight with water filling 1030 kg Deadline Immediate

Ref.Nr. 00782 Designation of the plant Cooling system Manufacturer The system is equipped with a Prima Power laser cutting machine type Platino 1530 Model 2008 Year of construction The plant is still under power until 06.09.2023 Pick-up The cooler must be picked up by October 10-11, 2023 Reason for submission: The hall must be emptied

liter capacity: 20550/42 Grad Qa coolant: R134a/1430 Refrigerant pressure: 20 bar total power requirement: 14,5 kW weight of the machine ca.: 186 kg dimensions of the machine ca.: 0,5x0,5x2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Technical details: liter output 20550/42 degrees Qa, coolant R134a/1430 refrigerator Pressure 20 bar, total power requirement 14.5 kW, additional information: The models in the HYFRA Gamma series are designed as immersion coolers for cooling water, oil and emulsion. The plug-and-play immersion coolers can be installed and can be used with an area requirement of just 0.5 m². This makes them very suitable for integration into various machine layouts. Outputs of up to 28 kW are available in just 0.5 m2 thanks to the compact design Stand space possible. This results in significant flexibility advantages when planning the production area layout and a significant increase in productivity because there is space for more producing machines. In the compact models of our immersion coolers, the condenser is installed horizontally. Thanks to this type of construction, the immersion coo ...

Technical data capacitor volume flow max.: 300m3/h capor-mass max in delivery state: approx. 430mm x1610 mm high Cylindricher part: approx. 273 mm weight of the chamber in delivery state: approx. 80 kg content upper part (capacitor): approx. 30L content lower part (template) approx. 28 L material Elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 to 80C capacitor vacuum max: 0 to 1000 mbar (absolute) (capacitor not suitable for overpressure!!) Temperature exchanger max: 1 to 80C operating equipment Exchanger: water pressure exchanger max: 10bar material exchanger: CU-tinned material capacitor: stainless steel Technical questions or other construction equipment please on request.; ready for use

Technical data capacitor volume flow Max: 300 m³/h Capacitor size max in the delivery State: CA. 430 mm x 1610 mm high cylindrical part: approx. Ø 273 mm weight of the Chamber in the delivery State: approx. 80 kg Contents upper part (capacitor): approx. 30 L Content bottom (template container) approx. 28 L Materials elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 ° to 80 ° C condenser vacuum max: 0 to 1000 mbar (absolute) (Suitable capacitor for overpressure!) Tauscher max temperature: 1 ° to 80 ° Equipment heat exchangers: Water Tauscher max water pressure: 10 bar Tauscher material: CU tinned Material capacitor: stainless steel Technical questions or other sizes on request.; ready for operation

refrigeration unit, cooling system, cooler, industrial refrigeration system HYFRA GmbH VWK 21/1-S Cooling capacity: 2326 W at 32 °C ambient temperature: max. +32 °C Permissible operating pressure: max. 29.5 bar voltage: 230 V 1AC 50 Hz Connected load: 2.1 kW pump: GRUNDFOS CH2-50 A-W-A-AQQE Q: 2.5 m3/h H: 31.0 m Hmax: 46 m P: 0.68 kW approx. 4.5 m connection cable used, tested ! Dimensions: 1050 x 510 x 490 mm

refrigeration unit, cooling system, cooler, industrial refrigeration system HYFRA GmbH VWK 21/1-S Cooling capacity: 2326 W at 32 °C ambient temperature: max. +32 °C Permissible operating pressure: max. 29.5 bar voltage: 230 V 1AC 50 Hz Connected load: 2.1 kW pump: GRUNDFOS CH2-50 A-W-A-AQQE Q: 2.5 m3/h H: 31.0 m Hmax: 46 m P: 0.68 kW approx. 4.0 m Connection cable used, tested ! Dimensions: 1050 x 510 x 490 mm

Central cooling lubricant preparation, 96 KW, HL1000/10000, Knoll, used Top Used - Top condition New in our programme is a top central cooling lubricant treatment plant from Knoll. The plant was in operation only about 10 years. - Central cooling lubricant preparation of the company Knoll, - The new price of this plant is approx. € 160,000. - Central cooling lubricant preparation of the company Knoll, - Year of construction 2009 - top condition, - Total output 96 KW, - with 4 Grundfos immersion pumps as pressure pumps, a 15KW, 17m³/h, 191m, - new price of one pump € 8360,-. - incl. 4 pieces switchable Mahle double filter / separating agent filter with differential pressure sensing, - cleaning of the cooling lubricant by means of belt cleaning, - belt width 150cm - incl. integrated cooling system from Hyfra Pedia, TRK540-S-E, 27,6 KW - Data of the cooling system ...

The PRIMA POWER PLATINO 1530 laser was produced in 2012 by the Italian company Prima Power. Technical parameters: – machine time worked: 24800 hours – power: 2500.0 W – CNC control: Primach 20L – X travel: 3000.0 mm – Y travel: 1500.0 mm – working area: 3000 x 1500 mm – maximum sheet length: 3000.0 mm – maximum sheet width: 1500.0 mm – maximum sheet thickness: 15.0 mm – maximum load on the table: 250.0 kg – machine length x width x height: 12000.0 mm × 6000.0 mm × 3000.0 mm – machine weight: 12000.0 kg Rofin Sinar DC 025 CO2 laser specification – type: CO₂ – laser: Rofin Sinar DC 025 – power: 2,500 Watt – power stability: + -2% FS – wavelength: 10.6 µm – gas type: He 67.7%; CO2 4.1%; N2 28.2% – beam propagation factor M2: 250 microseconds, 70 used resolutions – positioning accuracy: + -150 radians – operating condi ...

turning diameter: 250 mm turning length: 100 mm control: SIEMENS 840 D total power requirement: 35 kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _______________________________________________________ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, ...

Max. power: 4000W, max. compressed air supply: 6ar, with Conveying System APS/ALS and Chiller Hyfra LWK 31/1-S.

Inv. Num. : 6231 Type: 620 AC Producer: MORI-SAY Generated: 2021 Parameters: Control system: SIMATIC S 7 Operating hours: 1996 h Number of spindles: 6 pieces Maximum main spindle power: 9 kW Minimum main spindle speed: 500 1/min Maximum spindle speed: 6000 1/min bar diameter: 3-22 mm Maximum rod length: 3300 mm Drilling of the clamping tube: 28 mm Working time: 0.8-90 s Length: 6098 mm Width: 1230 mm Height: 2197 mm Weight: 5000 kg Cucchi Bar Feeder – BLT Multi F-6 AG0 Knoll High Pressure Cooling Hyfra Cutting Oil Cooling Batec Fire Extinguisher Filtermist 1000 Oil mist extraction Manuals Pick up Threaded coupling Channels to the feeder on dia. 6.9.13 mm including collets

BRAND: HG GRIMME YEAR: 2009 MODEL: GSF 20/10 APPLICATION TYPE: MILLING LOCATION: FRANCE MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: SIEMENS MODEL: 840D MAIN DRIVE SPINDLE SPEED RANGE: 40000 1/MIN SPINDLE MOTOR POWER: 2.5/3.2KW NUMBER OF AXIS: 5 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - TOOL LIFT : HEIGHT 725MM - WORKING AREA DIMENSIONS : 2400X1200 - 13-TOOL MAGAZINE - HYFRA EXTERNAL COOLER AVAILABLE - HARMONIC DRIVE AG

turning diameter over bed: 32 mm spindle passage: 32 mm turning length: 450 mm Control: Fanuc 31i-Model B c-axis: 0,001 Grad gripping station: 32 mm speeds: 6000 U/min c-axis: 0,001 0 turret (x-stations): 2x16 Stationen worktool system: 16 Stirnseite worktool system: 16 Quer-Rückseite worktool system: 5 Drehmeißel/Turn total power requirement: 3,7/5,5 kW weight of the machine ca.: 4,6 t dimensions of the machine ca.: 2,6 x 2 x 1,9 m driven tools: 24 16+8 bar loader: FMB 3-36/3200 CNC Swiss type lathe Maier ML 32-F2, year 2019 with loading magazine FMB 3-36 Very good condition, few working hours # Vib Turn chip breaking software # FMB 3-36 is equipped with two channels 22 and 32mm. # Pick-up spindle is equipped with Forkardt chuck. Max. overlap diameter 9mm # Extended headstock stroke Z1 axis 450mm (main spindle) # Extended headstock stroke Z2-axis 340mm (pick-up spindle) # High pressu ...

5-axis machining center HG GRIMME GSF - MACHINING PLASTICS - RESINS - FOAM ****MACHINING PLASTICS - RESINS - FOAM **** machine MODEL GSF 20/10 - YEAR 2009: _ Ibag motor spindle HF80.2 A40 CIP, 40000U/min; 2.5/3.2kw, SKi _ manual tool measurement _ tool lift: height 725mm _ Work area dimensions: 2400*1200 _ store of 13 tools _ presence of an external HYFRA cooler _ Harmonic drive AG _ PLC: Siemens 840 D

faceplate diameter: 2000 mm swing diameter: 2400 mm turning height: 1800 mm x-axis: 2000 mm y-axis: 2000 mm z-axis: 1200 mm ram adjustment: 1200/1500 mm faceplate turning speed range -stepless-: 2,3 - 250 U/min boring spindle drive: 27 kW milling drive motor: 27 kW spindle turning speed - stepless: 0-1200 U/min tool magazin:: 12 fach tool taper: 50 ISO control: Siemens 840 D sl chip conveyor: 2 workpiece weight: 15 t total power requirement: 61/92 kW weight of the machine ca.: 56 t dimensions of the machine ca.: 10 x 10 x 7 m m Machine type: CNC carousel lathe Machining Center - Vertical Rectangular ram head suitable for turning, milling, drilling, drilling and Threading. The machine was overhauled and modernized in 2014 automatic 12-fold tool changer C-axis driven tools • Tappet, hydrostatic bearing completely overhauled • Hyfraukik overhauled • Drives and ball screws renewed •  ...

Travel (X/YZ): 3,048 x 1,524 x 150 mm, Cutting head with 5 ́ / 7.5 ́ and 9 ́ lens, sheet metal detection, Laser CV5000 Pallet changer Fabr. Prima Power/OMS Sordella, max. 3,300 kg Extraction system, Fabr. Donaldson, Type 2DFP4-SPRK, 2,400 m³/h, Refrigeration system, Fabr. Hyfra, type sigma 67-S Control Prima Power NC Expressw e³ Laser Classic, YOC 2018,