used HUVEMA crdm

bore capacity in steel (diameter): 50 mm arm length: 350 - 1600 mm workpiece height max.: 1420 mm spindle taper MT: 5 spindle turning speed range: 56 -1450 U/min threading:: 40 mm quill stroke: 270 mm feed range - spindle: 0,06, 0,10, 0,20 mm/U slide adjustment -horizontal: mm table-size: 635 x 500 x 500 mm column diameter: 320 mm no. of turning speeds: 12 max. dis.center milling spindle to column: 1420 mm range L-W-H: 2060 x 995 x 2760 mm total power requirement: 3,5 kW weight of the machine ca.: 3300 kg Radial drilling machine with hydraulic clamping system. With IC timer - making it possible to release the arm for up and down movement and stopping the arm with one button. When changing the tool, the spindle can remain in its current position. gear wheels in oil bath safety device to prevent arm from falling down abruptly precision ground gear wheels integrated cooling system automatic ...

bore capacity in steel (diameter): 32 mm arm length: 220 - 950 mm workpiece height max.: 1210 mm spindle taper MT: 4 spindle turning speed range: 88 - 1500 U/min threading:: 27 mm quill stroke: 220 mm feed range - spindle: 0,05 - 0,09 - 0,15 mm/U slide adjustment -horizontal: 730 mm table-size: 600 x445 x 380 mm column diameter: 210 mm total power requirement: 1,5 kW weight of the machine ca.: 1400 kg dimensions of the machine ca.: 1805 x 82´6 x 2190 m Radial drilling machine with mechanical clamping. Auxiliary dial for spindle feed depth indication. The main spindle is balanced by a special spring that makes it more durable than all other balancing mechanisms. gear wheels in oil bath safety device to prevent arm from falling down abruptly precision ground gear wheels integrated cooling system automatic tool ejector gear wheel drven 2 speed motor The data for this ad was created with  ...

bore capacity in steel (diameter): 50 mm arm length: 360 x 1250 mm workpiece height max.: 1270 mm spindle taper MT: 4 spindle turning speed range: 56-1450 U/min threading:: M 27 mm quill stroke: 270 mm feed range - spindle: 0,06, 0,10, 0,20 mm/U slide adjustment -horizontal: 890 mm table-size: 635 x 520 x 420 mm column diameter: 300 mm base plate: 1785 x 785 x 190 mm no. of turning speeds: 12 max. distance between table and spindle: 1350 mm total power requirement: 3,5 kW weight of the machine ca.: 2300 kg range L-W-H: 2060 x 995 x 2645 mm Radial drilling machine with hydraulic clamping system. With IC timer - making it possible to release the arm for up and down movement and stopping the arm with one button. When changing the tool, the spindle can remain in its current position. gear wheels in oil bath safety device to prevent arm from falling down abruptly precision ground gear wheels  ...

bore capacity in steel (diameter): 50 mm arm length: 350 - 1600 mm workpiece height max.: 1250 mm spindle taper MT: 5 spindle turning speed range: 25 - 2000 U/min threading:: 30 mm quill stroke: 315 mm feed range - spindle: 0,04 - 3,2 mm/U slide adjustment -horizontal: 1250 mm table-size: 625 x 500 mm column diameter: 350 mm total power requirement: 4 kW weight of the machine ca.: 3500 kg dimensions of the machine ca.: 2,5 x 1,07 x 2,84 m The Huvema radial drill range is unbeatable in price and performance, the machines are used for drilling, reaming and tapping. The drills frame is made from a high-quality fine-grain cast iron with heavy ribbing to ensure maximum reduction of vibrations. Precision ground gears ensure that the machine runs quietly, and the practical layout of the electrical and mechanical controls at the headstock make for easy operation. The machines are also fitted wit ...

bore capacity in steel (diameter): 80 mm arm length: 500 - 2500 mm workpiece height max.: 2000 mm spindle taper MT: 6 spindle turning speed range: 16 - 1250 U/min threading:: M 65 mm quill stroke: 450 mm feed range - spindle: 0,04 - 3,2 mm/U slide adjustment -horizontal: 2000 mm table-size: 1000 x 800 x 560 mm column diameter: 550 mm base plate: 3520 x 1400 x 320 mm no. of turning speeds: 16 total power requirement: 7,4 kW weight of the machine ca.: 12500 kg dimensions of the machine ca.: 4000 x 1600 x 3850 mm Radial drilling machine with hydraulic clamping system. With IC timer - making it possible to release the arm for up and down movement and stopping the arm with one button. When changing the tool, the spindle can remain in its current position. gear wheels in oil bath safety device to prevent arm from falling down abruptly precision ground gear wheels integrated cooling system auto ...

bore capacity in steel (diameter): 42 mm arm length: 280 - 1100 mm workpiece height max.: 1270 mm spindle taper MT: 4 spindle turning speed range: 44 - 1500 U/min threading:: M 25 mm quill stroke: 230 mm feed range - spindle: 0,05 - 0,09 - 0,15 mm/U slide adjustment -horizontal: 820 mm table-size: 635 x 520 x 415 mm column diameter: 260 mm total power requirement: 2,2 kW weight of the machine ca.: 1400 kg dimensions of the machine ca.: 1880 x 864 x 2210 mm Radial drilling machine with mechanical clamping. Auxiliary dial for spindle feed depth indication. The main spindle is balanced by a special spring that makes it more durable than all other balancing mechanisms. gear wheels in oil bath safety device to prevent arm from falling down abruptly precision ground gear wheels integrated cooling system automatic tool ejector gear wheel drven 2 speed motor The data for this ad was created wi ...

bore capacity in steel (diameter): 50 mm arm length: 490 - 2000 mm workpiece height max.: 1900 mm spindle taper MT: 5 spindle turning speed range: 35 - 1890 U/min threading:: M 50 mm quill stroke: 370 mm feed range - spindle: 0,07 - 0,96 mm/U slide adjustment -horizontal: 1510 mm table-size: 1000 x 800 x 500 mm column diameter: 432 mm base plate: 2908 x 1102 x 250 mm no. of turning speeds: 12 total power requirement: 5,5 kW weight of the machine ca.: 6600 kg dimensions of the machine ca.: 3105 x 1400 x 2960 mm Radial drilling machine with hydraulic clamping device. With timer IC which makes it possible to release the arm to move up/down and to stop with one button. The spindle can remain in the same position when changing the tool. Accesories: - Gears in oil bath - Protection against suddenly falling arm - Precision ground gears - Integrated cooling system - automatic tool ejector The  ...

bore capacity in steel (diameter): 40 mm arm length: 350 - 1250 mm workpiece height max.: 1250 mm spindle taper MT: 4 spindle turning speed range: 25 - 2000 U/min threading:: 27 mm quill stroke: 315 mm feed range - spindle: 0,04 - 3,2 mm/U slide adjustment -horizontal: 900 mm table-size: 625 x 500 mm column diameter: 350 mm total power requirement: 3,0 kW weight of the machine ca.: 3000 kg dimensions of the machine ca.: 2,15 x 1,07 x 2,84 m The Huvema radial drill range is unbeatable in price and performance, the machines are used for drilling, reaming and tapping. The drills frame is made from a high-quality fine-grain cast iron with heavy ribbing to ensure maximum reduction of vibrations. Precision ground gears ensure that the machine runs quietly, and the practical layout of the electrical and mechanical controls at the headstock make for easy operation. The machines are also fitted w ...

cutting diameter: 360 mm saw band length: 5000 x 34 x 1,1 mm cutting width: 640 mm cutting capacity - flat: 510 x 360 / 30° mm cutting capacity - round: 360 / 30° mm cutting capacity - square: 360 x 360 / 30° mm cutting capacity - flat: 390 x 360 /45° mm cutting capacity - round: 310 /45° mm cutting capacity - square: 360 x 360 / 45° mm cutting capacity - flat: 250 x 360 /60° mm cutting capacity - round: 310 / 60° mm cutting capacity - square: 270 x 270 / 60° mm cutting capacity - flat: 640 x 360 / 90° mm cutting capacity - round: 360 / 90° mm cutting capacity - square: 360 x 360 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 1,1 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 4,3 kW weight of the machine ca.: 1630 kg dimensions of the machine ca.: 3000 x 1200 x 2000 mm Accessories: • Inverter • hydraulical vice • automatical ...

On and including pedestal

On and including pedestal

On and including pedestal

On and including pedestal

The lot is located on the 1st floor, accessible by stairs. There is no elevator. A forklift truck is available on site.

incl. clamping device

incl. clamping device

turning diameter over bed: 310 mm turning diameter over slide rest: 178 mm turning length: 910 mm turning dia. in gap: 420 mm spindle turning speed range: 70 - 2000 U/min spindle bore: 38 mm number of feeds: 18 Stk feed range: 0,052 - 1,392 mm/U metrical thread cutting: 0,4 - 7 mm voltage: 230 / 50 V Hz total power requirement: 1,1 kW weight of the machine ca.: 0,45 t dimensions of the machine ca.: 1,6 x 0,8 x 1,4 m • incl. 3 and 4 jaw chuck • fixed and followed steadies • reducing bush MK4 - MK3 • 2 fixed lathe centers • 1 Set of changing wheels • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mm plate thickness: 2 mm distance between columns: 1020 mm bending angle max.: 135 ° total power requirement: 0 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1350 x 850 x 1175 m • maximum bending angle 135° • hand-operated The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 mm cutting diameter: 90 mm sawblade width: 2,5 mm capacity 90 degrees: round: 90 mm capacity 90 degrees: flat: 120 x 70 mm capacity 45 degrees: round: 80 mm capacity 45 degrees: flat: 80 x 70 mm turning speeds: 52 -104 U/min voltage: 400 V frequency: 50 Hz power capacity: 1,32 -1,9 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 500 x 50 mm cutting diameter: 180 mm turning speeds: 3000 U/min capacity 90 degrees: round: 180 mm capacity 45 degrees: round: 180 mm capacity 90 degrees: square: 150 x 150 mm capacity 45 degrees: square: 120 x 120 mm capacity 90 degrees: flat: 300 x 125 mm capacity 45 degrees: flat: 145 x 120 mm voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 430 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,7 / 2,0 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 ja ...

thread dia.: 12 mm threading length: 20 mm turning speeds: 400 U/min working area: 500 - 1600 mm weight of the machine ca.: 25 Kg dimensions of the machine ca.: m • pneumatical thread cutting device, M3 - M12, • with 6 adapters of thread cuttings, Size 1, • control valve with lubrication, • order no. 31681, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 500 x 50 mm cutting diameter: 170 mm turning speeds: 3000 U/min reus: variabel einstellbar U/min capacity 90 degrees: round: 170 mm capacity 45 degrees: round: 140 mm capacity 90 degrees: square: 150 mm capacity 45 degrees: square: 120 mm capacity 90 degrees: flat: 300 x 125 mm capacity 45 degrees: flat: 145 x 120 mm voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 500 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1500 mm bending angle max.: 135 ° total power requirement: - kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 1,7 x 0,7 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm turning dia. in gap: 690 mm spindle bore: 58 mm spindle turning speed range: 25-2000 U/min feeds - longitudinal: 0,031-1,7 mm/U voltage: 400 V / 50 Hz total power requirement: 5,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,3 x 1,0 x 1,5 m • with 3- and 4- jaw chuck, • 2 axis-digital display NEWALL, • fixed and live steady, • Machine light. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.