used HURCO bmc

Key data: 1016 mm, 508 mm, 610 mm

Hurco BMC 4020 with Ultimax 4 controller, built in 2000 Machine runs well and is immediately ready for use. Travels: x-y-z. 1016mm x 508mm x -610mm Speed 8000 1/min, magazine 24 places Tool changer has been repaired and runs very well. Keyboard and trackball and touch screen new. Preparation for Lehmann rotary axis installed. (servo pack and wiring in the control cabinet) Sale free loaded onto truck Visit by appointment with us in 83558 Maitenbeth.

2 pieces are available CNC axis: 3 Manufacturer: HURCO BMC 2416 Controls: Ultimax 4 Table size: 760x400mm X-Y-Z: 610 x 406 x 509mm Spindle: 80-8000 rpm Tool taper: SK 40 ATC: 24, vertical

x-travel: 762 mm y-travel: 560 mm z-travel: 1020 mm control: Ultimax III taper ISO: 40 Table dimensions: 1300 x 700 mm work piece spindle speed: 30 - 4000 U/min voltage: 380 V total power requirement: 7,5 - 5,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5552 Type: BMC 24 SSM Producer: HURCO Created: 2004 Parameters: Control system: ULTIMAX Work table length: 760 mm Work table width: 400 mm Spindle drive power: 7.5 kW Tool magazine: 24 pieces Speed: 80-8000 1/min Travel X-axis: 610 mm Travel Y-axis: 405 mm Travel Z-axis: 505 mm Cone: SK40 Machine height: 2650 mm Machine length: 2140 mm Machine width: 2100 mm Machine weight: 4200 kg

Max. load: 500kg, feed rate: 3-7600mm/min, rotational speed: 80-8000/min, length: 4000mm, width: 3776mm, height: 2692mm, weight: 4.15t.

x-travel: 610 mm y-travel: 405 mm z-travel: 510 mm table surface area: 760 x 400 mm spindle taper: SK 40 spindle turning speed - stepless: 80 - 8000 U/min spindle drive: 7,5 kW max. torque on the spindle: max. 142 Nm feeds: 3,0 - 7600 mm/min rapid motion -longitudinal/cross/vertical: 24 / 24 / 15 m/min distance table / vertical spindle: max. 600 mm table load: 350 kg no. of tools in magazin: 24 workpiece diameter at full load: 80 mm tool length - max.: 300 mm weight of tools max.: 6,8 kg control: ULTIMAX SSM total power requirement: 18 kVA weight of the machine ca.: 4,1 t Accessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1020 mm, 510 mm, 610 mm

Inv. Num. : 6222 Type: BMC 4020 Producer: HURCO Created: 2000 Parameters: Control system: UNIMAX Operating hours: 59,600 h Work table length: 1220 mm Work table width: 510 mm Minimum vertical spindle speed: 80 1/min Maximum vertical spindle speed: 8000 1/min X-axis travel: 1020 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Spindle power: 15 kW Maximum tool weight: 682 kg Max. tool weight: 7 kg Machine height: 2670 mm Machine length: 3350 mm Machine width: 2320 mm Machine weight: 5600 kg Equipment: Tool clamping 2015: Spindle change

x-travel: 760 mm y-travel: 460 mm z-travel: 610 mm control: Hurco Ultimax total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition. Travel X x Y x Z: 1016 x 510 x 610 mm Table clamping area: 1220 x 510 mm Spindle mounting SK 40 Spindle speed: 80 - 8000 rpm. / min. Machine weight: approx. 5.6 t Dimensions lxwxh: 3.35 x 2.67 x 2.32 m Possibility of in-service inspection upon agreement.

Description: Serial number: B64T-91203109AB Operating voltage: 400 V Frequency: 50 Hz Control unit: ULTIMAX Tool holder: SK 40 Travel distances: X: 1625 mm Y: 860 mm Z: 760 mm Spindle nose to clamping table: 150 - 910 mm Table clamping surface: 1675 x 890 mm T-slot in the table: 7 Clamping groove width: 18 mm Groove spacing: 125 mm Max. table load: 1800 kg Feed speed in X-, Y- and Z-axis: 3 - 11400 mm/min Speed range: 80 - 8000 rpm Tool diameter with full occupancy of the tool changer: 80 mm Max. tool weight: 7 kg Max. tool length: 300 mm Resolution of measuring system inside the control unit: 0.0005 mm Measuring system: 0.001 mm Accuracy: Positioning accuracy travel distances: +/- 0.01 mm Repeatability of travel distances: +/- 0.005 mm The machine is equipped with a 24-position tool changer Attention: the machine can be driven on a normal truck up to 3000 mm transport width weight appro ...

Description: Control: ULTIMAX 4 Spindle speed: 8000 rpm Travel distances: X-axis: 760 mm Y-axis: 460 mm Z-axis: 610 mm Work table dimensions: 1000 x 500 mm Tool holder: SK 40 Included: Documentation Approx. Onsite Dimension. (l x w x h): 2,800 x 2,500 x 2,900 mm, weight approx.: 4,500 kg

Table length: 1020 mm Table width: 400 mm Longitudinal X: 760 mm Cross Y: 460 mm Vertical Z: 610 mm Positions ATC: 0   Positions APC: 0   CNC Brand: _Unknown / Other CNC Model: Ultimax Make Hurco BMC 30 HT Type BMC 30 HT Year 1996 Ultimax Table length (mm)L = 1.020 Table width (mm)W = 400 Longitudinal X (mm)X = 760 Cross Y (mm)Y = 460 Vertical Z (mm)Z = 610 Sk 40 / 8000 / 11 kW Optional Nikken 4e axis  

Control Winmax Travel X / Y / Z: 1060/610/610 mm Spindle speed 12,000 min-1 4th axis lying swivel head Tool magazine for 40 tools, SK 40 Cooling through the spindle Chip conveyor

Trackball with connection cable for Ultimax control Replacement for Hurco Ultimax 4 , Ultimax 3 Easy to change, ready to ship New

Table length: 1220 mm Table width: 510 mm Longitudinal X: 1020 mm Cross Y: 510 mm Vertical Z: 610 mm Positions ATC: 20   Positions APC: 0   CNC Brand: _Unknown / Other CNC Model: Ultimax MACH-id     6031 MAKE         HURCO TYPE           BMC 4020 YOP             2000 SPECIFICATIONS X - Travel        1020 mm Y - Travel          510 mm Z - Travel           610 mm Table Length        1220 mm Table Width           510 mm Table load             683 Kg Feed rate X-Axis          20.000 mm/min. Feed rate Y-Axis           20.000 mm/min. Feed rate Z-Axis ...

Machine Details Stock No. 1105-03273 Type of machine Machining Center - Vertical Make HURCO Type VMX 42 M 2008 Year of Manufacture Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis ex work Technical details x-travel 1060 mm y-travel 610 mm z-travel 610 mm work surface 1200 X 610 mm engine output (30 min. ED) 15 kW Distance between table and spindle 150 - 760 mm Torque 600 Nm rpm 30 min ED 22 Control Ultimax 4 weight of the machine about 6 t Additional information ultimax 4 8000 rpm

Machine Details Stock number 1105-03764 Machine type CNC lathe Brand HURCO Type TM8 Year of construction 2012 Control type CNC Storage location HAGUENAU Country of origin Delivery time at short notice - by arrangement. Freight base delivery from location. Technical details Turning diameter 305 mm Turning length 477 mm Planweg. (x-axis) 203 mm Longitudinal travel 508 mm Spindle bore 52 mm Speed 4800 rpm Tool turret 12 Rapid traverse 19/24 m/min Total power requirement 11 kW Machine weight ca. 3800 kg Information Equipment: - Winmax CNC control - 3-jaw chuck - 12-fold revolver - Tool measurement -Tailstock -Conveyor - Coolant device

HURCO VM10 Vertical Machining Centre. Hurco WINMax Control Year of construction: 2010 Manufacturer: Hurco Model: VM10 Control: Hurco WINMAX Spindle Speed: 10000rpm Table size: 762 x 356 mm Tool change capacity: 20 Tool size: DIN40 Traverses XYZ: 560 x 356 x 457mm

BRAND: HURCO YEAR: 2018 MODEL: TMX8MYSI APPLICATION TYPE: TURNING LOCATION: ITALY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: HURCO MAIN DRIVE SPINDLE SPEED RANGE: 4500 1/MIN MOVEMENT X-AXIS MOVEMENT: 285.5 MM Y-AXIS MOVEMENT: +- 55MM Z-AXIS MOVEMENT: 560 MM W-AXIS MOVEMENT: 650 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX TURNING DIAMETER: 336 MM - MAX TURNING LENGHT: 527 MM - COUNTERSPINDLE RPM: 6000 - BAR PASSAGE: 64. 5 MM - LIVE TOOLS RPM: 5000 - 12 LIVE TOOL POSITIONS QUALITATIVE MACHINE BENEFITS: - SEVERAL TOOL AND HOLDERS INCLUDED (7 LIVE TOOLS)

No. 5008: 1 gebr. Posten div. Spare Parts - Keyboard / Pcb for Spare Parts Carrier / Retrofit Fabr. HURCO, type Ultimax / Winmax, Accessories: 6 x Input keyboard type 807-0013-005 1 x Input Keyboard Mask 1 x Input keyboard type 807-0013-004 1 x PCB No. 414-0626-002 with Poti RE 45 / 415-0627-001 Other: Shipping weight approx. 6 kg

x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm Control: Siemens type: 810 Tools changer for 12 tools: tool taper: ISO 40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Replacement spindle overhauled for Hurco VMX 24S Speed: up to 15,000 rpm Refurbished: February 2013 by SN-Spindeltechnik with test protocol

Table length: 1220 mm Table width: 510 mm Longitudinal X: 1020 mm Cross Y: 510 mm Vertical Z: 610 mm Positions ATC: 24   Positions APC: 0   CNC Brand: Hurco MACH-id    5408 MAKE         HURCO TYPE           BMC 4020 HT YOP             1996 SPECIFICATIONS X - Travel       1020 mm Y - Travel         510 mm Z - Travel         610 mm Table Length     1220 mm Table Width        510 mm Table load         700 Kg Feed rate X-Axis       10.000 mm/min. Feed rate Y-Axis         10.000 mm/min. Feed rate Z-Axis          10.000 mm/min. Spindle Taper        ...

This Hurco TM8i Lathe was manufactured in the year 2018 and has 7006 production hours, of which 1696 spindle hours. It is equipped with a HURCO control unit. The machine has a spindle speed of 4000 rpm.

Travel X/Y/Z: 1270mm/660mm/610mm, max. spindle speed: 15000rpm, feed X/Y/Z in mm/min: 15200/15200/15200. table load (uniform): 1360kg, dimensions X/Y/Z: approx. 4900mm/4600mm/3000mm, weight: approx. 10000kg. On-site inspection is possible.