Inv. Num. : 7688 Type: 203 F2 Producer: HITACHI Generated: 2000 Parameters: Control System: MARK-10W Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 170 mm Feed length in U-axis (-): 20 mm Feed length in the V-axis ( -): 20 mm Maximum wire thickness: 0.25 mm Dielectric container capacity: 160 l Max. workpiece dimensions: 450 x 350 x 170 mm Max. workpiece weight: 200 kg Machine height: 1880 mm Machine length: 1525 mm Machine width: 1810 mm Machine weight: 1500 kg
HITACHI RCUE50CLG Brand:HITACHI Type:RCUE50CLG Stock number:M23-4664 Cooling capacity:145 kW Refrigerant:R407C Refrigerant Content:1 kg Voltage:400 Volts Power consumption:42,4 kW Dimensions:1088 x 935 x 1343 mm Weight:680 kg Year:2009 New/unused Number in stock:1 piece(s) Price:On request I Description: New unused Hitachi split chiller with 1 screw compressor. Mentioned capacity at a water temperature of +12/7°C and a condensation temperature of +45°C. This split chiller is without a condenser. We can offer a suitable condenser on request. Visit our website: used-refrigeration
Key data: 410 mm, 260 mm, 210 mm
Inv. Num. : 6039 Type: 254Y Producer: Hitachi Created: 2004 Parameters: Control System: MARK-10W Feed length X-axis: 410 mm Feed length axis Y: 260 mm Feed length axis Z: 210 mm Axle U: 200 mm Axis V: 200 mm Wire diameter: 0.25 mm Max. workpiece dimensions: 680 x 520 x 210 mm Max. workpiece weight: 410 kg
Key data: 250 mm, 400 mm, 210 mm
Inv. Num. : 2399 Type: 254Y/FF3 Producer: HITACHI Created: 2004 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 210 mm Feed length in the U-axis ( -): -100 mm Feed length in the V-axis ( -): -100 mm Rapid traverse X/Y/Z: 1500 mm/min Max. workpiece dimensions: 600x400x210 mm Max. workpiece weight: 400 kg
used
Mfc.: Hitachi Type: 6-Hi reversing mill Built: 1976 Shut down: 2014 Revamped: 2010 Control system – changed DC to AC motors Load cells were replaced in March 2005 & thickness gauge in March 2009 Roll coolant cooler was replaced in July 2009 Control boards of hydraulic screw down & electromagnetic valves were replaced in 2009. Strip width: 610 – 1330 mm Thickness Entry: 1.6-4.5 mm Exit: 0.15 – 2.3 mm
HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM
Hitachi chain moulder 110 V This article is in good working condition. The chain size is 30 mm and is out of focus. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for fences, sheds, huts, restoration and much more.
Hitachi starter motor -Voltage: 12 V -Type: S114-443 -Teeth: 8 -Weight: 5 kg
Frequency converter, frequency converter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, servo drive, drive controller -Manufacturer: Hitachi, frequency converter Drive Controller Combivert -Type: SJ200-005NFE2 -Power: 0.55 kW -Number: 1x frequency converter available -Dimensions: 120/80/H130 mm -Weight: 0.8 kg
Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, inverter, converter, servo drive, drive controller -Manufacturer: Hitachi, frequency converter inverter -Type: WL200-004SFE -Power: 0.4 kW -Number: 2x inverters available -Price: per piece -Dimensions: 120/70/H130 mm -Weight: 0.7 kg/pc.
Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Manufacturer: Hitachi, Rotary hammer type DH 25V with transport case -Nominal power input: 600 W -Drilling/Percussion drilling -Speed: 0 - 800 rpm -Drilling capacity: Steel 13 mm / Concrete 25 mm -Case dimensions: 445/340/H170 mm -Weight: 10.3 kg
turning diameter: 500 mm turning length: 610 mm control: Seicos total power requirement: kW weight of the machine ca.: 5250 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hitachi excavator style:, suitable for FH150 & FH180, Short style: ⬠500,- excl. 20% VAT, Long style: ⬠750,- excl. 20% VAT
blower power: 19 kW motor: . bucket: Diesel . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
