used HERBOLD pu

Cutting mill - made in germany - Manufacturer. NEUE HERBOLD - New machine - Drive: 75 kW Conveyor belt funnels Inlet cross-section: 720 x 980 mm Rotor diameter: 600 mm Working width: 980 mm Number of blade rows Rotor: 5 Number of stendor knives: 2 The NEW HERBOLD cutting mill of the LM series is specially designed for crushing voluminous plastic waste with thin to medium wall thickness. Applications include: shredding of foils, canisters, profiles, main and secondary profiles, bumpers, injection moulding parts, etc.

The plant is suitable for the agglomeration of thermoplastic films and fibers. Depending on the material, the throughput is between 500 kg – 1000 kg/h. The facility consists of: • Feed belt • Load-dependent control for the feed belt • Metal detection coil • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo Ce9vqix • Plastcompactor unit HV-70, which consists of storage silo feed auger, plastcompactor, central blower and cooling circuit • HERBOLD recutting mill type SML 45/100-S4-2 • Intensive cooling • Conveyor blower SZS II 630/200 • Screening machine • Undersize recirculation into the compactor silo • Material conveying type MFT with big bag station and automatic diverter to the on-site silo • Automatic exhaust air filter • Electrical circuit •Compressor.

Fine mill / impact disc mill Grinding disk diameter: 800 mm Drive: 90 kW new machine Scope of application: NEUE HERBOLD Impact Disc Mills of the ZM series are fast-running fine mills for pulverizing brittle, medium-hard or impact-resistant materials and granules. Typical application is the fine grinding of H-PVC / PE / PC / etc. Impact Disc Mills from the NEUE HERBOLD process e.g.: - Pipe and profile regrind from extrusion - Pre-shredded panel and edge strip waste - slides - Amorphous and brittle products from the areas of the food industry, the chemistry and pharmacy

This Herbold grinding mill is in machine storage at Plastima Used Machinery. The machine is in good condition for its age and has been disconnected in working state. The machine is from 1986. – Brand : Herbold – Model: SMS 45/30-F9-3 – Year built: 1986 – Working hours : Unknown

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

Machine type: friction washer / friction separator Manufacturer: NEUE HERBOLD GMBH Year of manufacture: NEW rotor diameter: 560 mm working length: 3000 mm Drive: 30 kW for integration in recycling processing plants - to wash plastic materials such as film flakes, foil chips, granules, PET bottle-flakes,...

Cutting mill / Granulator brand: NEUE HERBOLD manufacturing year: brand new machine drive: 55 kW Rotor-width: 450 mm Working-width: 1000 mm Rotor with 5 blade-rows 2 stator-blade rows Roller feed hopper size reduction of loose film, hollow containers, barrels,...

Cutting mill / Granulator brand: NEUE HERBOLD manufacturing year: brand new machine drive: 45 kW Rotor-width: 450 mm Working-width: 600 mm Rotor with 4 blade-rows 2 stator-blade rows Roller feed hopper size reduction of loose film, hollow containers, barrels,...

Granulator especially designed for inline size reduction of thin film (like BOPP / BOPET). Feeding via roller feeder. Extreme througput rate ! brand: NEUE HERBOLD made in germany - heavy duty model - drive 250 kW - size reduction of film - feeding via roller feeder - Rotor diameter: 800 mm - working width: 1950 mm - for very high throuput rates for the size reduction of film, tangled or bunched tapes and bands, PP big bags, crates or other hollow containers, BOPP / BOPET / PP in-line and off-line film extrusion lines.

Cutting mill / granulatgor - heavy duty Machine type: SM 800/1200-S7-2 Manufacturer: NEUE HERBOLD Drive: 132 kW Rotor diameter: 800 mm Working width: 1200 mm

Cutting mill / pipe cutting mill Special mill for shredding pipes Feeding via feeding shaft (rope pull system) Manufacturer: NEUE HERBOLD, D-74889 SINSHEIM Rotor diameter: 800 mm Working width: 600 mm Drive: 110 kW

Manufacturer: NEUE HERBOLD, D-74889 SINSHEIM Machine type: Washing drum Diameter: approx. 1600 mm Length: approx. 6150 mm Application: By means of the washing drum, the dirty, pre-shredded plastic fraction is (pre-shredded foil bales, bottles, other highly contaminated plastics) free of large contaminants such as stones, metals, glass, etc., so that the pre-cleaned material can be further processed in the further recycling process.

Material conveying blower Manufacturer: NEUE HERBOLD Type MFT 55/500 VA Version in stainless steel Drive 11 kW

Three-shaft shredder / pipe shredder - designed for the crushing of thick-walled pipes Manufacturer: NEUE HERBOLD New machine Drives: 2 x 30 kw - 1 x 37 kW

Cutting muehle - heavy execution - Manufacturer: NEUE HERBOLD New machine Funnel optional / conveyor hopper / funnel with screw feeder Drive: 200 kW Rotor diameter: approx. 800 mm Working width: approx. 1600 mm Rotor with 9 knife rows Stator knife: 4

Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)

Cutting mill / universal cutting mill GENERALOVER / with new rotor Manufacturer: NEUE HERBOLD Drive: 75 kW Rotor diameter: approx. 450 mm Working width: approx. 1200 mm Rotor with 4 knife rows Stlet knife rows: 2

Cutting mill Manufacturer: NEUE HERBOLD Drive: 37 kW Funnel: optional Rotor diameter: approx. 300 mm Working width: approx. 800 mm Knife rows Rotor: 3 Stlet knife rows: 2

NEUE HERBOLD - Zig-Zag-Seder, Cross section: approx. 650 / 170 mm for the separation of fine parts from the grinding material Accessories: 2x cell wheel valve type NU 250 with vulkollan sealing, 0.37 kW each, 1xMaterial conveyor blower type MFT 75/500, 11 kW

New Herbold granulator for the treatment of film waste -Year of construction 2011 -Drive: 110 kW -with roller feeder type EB 980 - from the technical center (machine was used exclusively for experimental/demonstration purposes) - Rotor diameter: 600 mm - Working width: 1000 mm - 9 rows of knives - V-cut

NEUE HERBOLD cutting mill For processing / crushing of film waste / thin films (e.g. BOPP / BOPET / PP) -Year of construction 2011 -Drive: 110 kW -with roller feeding device type EB 980 - from test room (machine was used exclusively for test/demonstration purposes - Rotor diameter: 600 mm - Working width: 1000 mm - 9 rows of knives - V-cut (image similar)

NEW HERBOLD granulator Universal mill – heavy design -Year of construction 1998 - made in stainless steel - from the technical center (machine was used exclusively for experimental/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Herbold Granulator overhauled 2022 Construction Base frame as steel/weld structure in reinforced design Rotor: Ø approx. 400 mm 6 knives Fixed knives: 10 knives Drive motor: 30 kW

Used Herbold Mill Model PU 300 Refurbished - rotor new, with sieve basket, newly mounted, converted dosing chute Mill made of INOX Ex-proof

Used granulator Manufacturer: HERBOLD Type: SML 60/100-G3-2 Specifications: Drive power: 75 kW, 140 A 380 V, 50 Hz rpm: 1480 Machine weight: approx. 5,000 kg