used HELMERDING kdh

a used stamping machine Helmerding, type KDH/2100/2, BauJ. 2008 Pressure 315 to., partially overhauled, Siemens S7 controller, hydraulic. Overload protection, complete helmerding conveyor system, distance between the stands 2100 mm, installation height 500 mm, stroke 40-200mm, 20-100 strokes, table surface 2000 x 1200 mm

pressure: 315 t stroke: 40-200 mm no. of strokes: 20-100 Hub/min ram - range of adjustment: 120 mm ram surface: 2000x1100 mm table surface area: 2000x1200 mm hole in the table: 1700x250 mm : 500 mm column travel -side: 820x650 mm total power requirement: 45 kW weight of the machine ca.: 44 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 t throat: 300 mm stroke: 8 - 110 mm table surface area: 750 x 600 mm ram adjustment: 75 mm ram surface: 430 x 230 mm hole in the table: 250 x 150 mm tool hole in ram: 40 mm no. of strokes: 60 + 90 Hub/min weight of the machine ca.: 4,4 t total power requirement: 4,5 - 6,8 kW dimensions of the machine ca.: 1,95 x 1,1 x 2,35 m distance table/ram: Hub unten, Stöß. unten 19 mm distance table/ram: Hub oben, Stöß. oben 380 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 300 mm stroke: 20 - 124 mm strokes per minute: 60/90 ram adjustment: 85 mm table surface area: 920 x 600 mm ram surface: 540 x 290 mm daylight, max. stroke above - ram adjustment above: max. 440 mm hole in the table: 290 x 170 mm tool hole in ram: Dm. 50 mm total power requirement: 6,5 - 8,5 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eccentric press fabr. HELMERDING type PEP 12/15 BMasch. -No: 831184, year of construction 1988Technical specifications:Nominal force: 12 tMax. Ram stroke: 60 mmThroat: 160 mmTable surface area: 315 x 400 mmAdjustment of the ram: 40 mmMax. Strokes: 180 rpm.Ram area: 100 x 125 mmDrive power: 1.1 kWWith- 2 hand release- foot switch- separate control cabinet- Ortlinghaus additional brake and hydr. Multi-plate clutch- according to UVVused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make HELMERDING type EL 35 BCom.-No: 77218 Masch.-No: 5182 year of construction 1977Technical specifications:Pressure capacity: 35 tStroke adjustment: 12 - 80 mmRam adjustment: 70 mmRam area: 340 x 180 mmgreatest distance table - ram: 360 mmStrokes per minute: 110Table adjustment: 150 mmProjection: 230 mmTable surface: 600 x 460 mmDrop-through hole in the table: 220 x 130 mmWeight approx.: 2050 kgwith- Additional brake Ortlinghausen and UVV- Height-adjustable tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure: 110 t throat: 300 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram - range of adjustment: 85 mm table surface area: 920x560 mm ram surface: 540x280 mm hole in the table: 320x190 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,6 t dimensions of the machine ca.: 2000x2000x2600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t throat: 300 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram - range of adjustment: 85 mm table surface area: 920x560 mm ram surface: 540x280 mm hole in the table: 320x190 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,6 t dimensions of the machine ca.: 2000x2000x2600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t throat: 350 mm stroke: 20-120 mm no. of strokes: 40-60 Hub/min ram - range of adjustment: 85 mm table surface area: 1050x690 mm ram surface: 650x320 mm hole in the table: 325x200 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8,6 t dimensions of the machine ca.: 2500x2500x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t throat: 350 mm stroke: 20-120 mm no. of strokes: 40-60 Hub/min ram - range of adjustment: 85 mm table surface area: 1050x690 mm ram surface: 650x320 mm hole in the table: 325x200 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8,6 t dimensions of the machine ca.: 2500x2500x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t throat: 295 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram - range of adjustment: 85 mm table surface area: 920x580 mm ram surface: 540x280 mm hole in the table: 300x180 mm table height: 830 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,1 t dimensions of the machine ca.: BxTxH 1500x2000x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35 t throat: 230 mm stroke: 20-120 mm no. of strokes: 130 Hub/min ram - range of adjustment: 70 mm ram surface: 330x170 mm table surface area: 600x450 mm hole in the table: 200x120 mm : 150 mm weight of the machine ca.: 3.0 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 t throat: 250 mm stroke: 6/98 mm ram adjustment: 75 mm no. of strokes: 60/90 Hub/min table height adjustment: 150 mm table surface area: 695 x 500 mm total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 0,9 x 1,6 x 2,15 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t throat: 290 mm stroke: 20-124 mm no. of strokes: 60 / 90 Hub/min ram adjustment: 85 mm table surface area: ca. 920 x 590 mm ram surface: ca. 530 x 280 mm distance table to upper part of the press: ca. 450 mm hole in the table: ca. 180 x 300 mm mm table height: ca. 750 mm tool hole in ram: Ø 50 mm Number of working hours: 8214 h distance table to upper part of the press: mm weight of the machine ca.: 5,5 t dimensions: ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new ones press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 300 mm stroke: 20 - 128 mm ram - range of adjustment: 80 mm strokes per minute: 60 - 90 table surface area: 920 x 600 mm ram surface: 540 x 290 mm hole in the table: 315 x 180 mm daylight, max. stroke above - ram adjustment above: 520 mm tool hole in ram: Dm. 50 mm total power requirement: kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 1,8 x 1,7 x 2,2 m Furnishing: - Gear transmission - fixed table - Triple bearing shaft - semi-automatic stroke adjustment - hydraulic clutch-brake combination - hydraulic overload (modern unit mounted on the stand on the left) - Hydraulic unit with oil cooler for clutch mounted on the left side of the stand - Ball spindle adjustment using a ratchet - automatic central lubrication VOGEL - Operating instructions / CE declaration available Machine is partially overhauled in our company as follows: - dismantled, clea ...

pressure: 150 t throat: 350 mm stroke: 20-120 mm no. of strokes: 50 / 75 Hub/min ram - range of adjustment: 85 mm table surface area: 1150x670 mm ram surface: 800x380 mm hole in the table: 330x200 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drill, column drill, column drill, pillar drill, box column drill, tapping machine, tapping machine -Manufacturer: HIW Helmerding, drill press -Motor: 1.0/1.6kw -Speeds: 95 - 1050 rpm, 8 levels -Feed: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel 685 mm -Spindle mount: MK3 -Spindle stroke: 180 mm -Projection: 280 mm -Dimensions: 1100/650/H2340 mm -Weight: 690 kg

pressure: 50 t throat: 245 mm stroke: 14 / 90 mm ram adjustment: 75 mm table height adjustment: 150 mm strokes per minute: 42/85 table surface area: 700 x 490 mm ram surface: 400 x 230 mm tool hole in ram: 40 mm total power requirement: 4 kW weight of the machine ca.: 3,41 t dimensions of the machine ca.: 0,8 x 1,75 x 2,1 m Machine is partially overhauled in our house as follows: - Cleaning and inspection - new control cabinet with safety control and touchscreen display - new 2-hand control panel - Current UVV test with braking time measurement - Machine safe for hand inlay work The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35 t throat: 230 mm stroke: 12-84 mm no. of strokes: 135 Hub/min ram - range of adjustment: 70 mm table surface area: 600x460 mm ram surface: 340x170 mm hole in the table: 220x130 mm table height: 800 mm tool hole in ram: Ø 35 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1800x1800x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Press force: 12 t Max. stroke: 60 mm Stroke: 6 - 60 mm weight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 900 x 900 x 2,000 mm

Description: incl. operating instructions New machine! weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 4,150 x 2,400 mm

Lawn Sweeper for PTO 540 rpm, working width 180 cm, double Sweeper roller system, hydraulic high dump, electrical. Remote control acting on solenoid valves, ew 1 hydraulic connection required. Tank contents approx. 3 m ³, rear axle 6 x frosted. Drawbar adjustable in height, illumination device com. StVZO. Machine is relatively little used, brushes and Tin in good condition with paint defects inside the tank and signs of use. Incl. operating instructions, parts list, and ABE. Type same Kugelmann KDH 150 (150 cm working width) also available and more with working widths from 90 to 170 cm. -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

Conversion control for exenter presses , Press Safety Control Replaces old Preventa controllers ( OTR SEZ ZBS ) Control New manufactured on customer request, for a 63 to Weingarten, Control designed for drive 6 KW .od. Schuler / Weingarten / Heilbronn / Ruhrmann / Helmerding Ready to connect . Checked. Motor Connect, Two-hand console Connect, FootSwitch Connect, Emergency Off Circle and Safety Valve Connect. Press into operation . Advice on conversion, UVV acceptance. Additional variants possible. email info@pradler Recognized maintenance technician Pradler Machine Service email info@pradler Tel: 05242/43186

Key data: 1020 mm, 520 mm, 560 mm

Travel X-axis 1020 mm Y-axis 520 mm Z-axis 560 mm 4.Axle Matsumoto KDH 302R-17, series number 100282, Position only Clamping table Table clamping surface 1100x510 mm Max. table load 750 kg. Head Spindle speed 12000 rpm, no gearbox Spindle holder BT 40 Spindle drive 7.5 kW Feed Feed X/Y/Z axis 5m Rapid traverse X/Y/Z axis 24/24/20 m Tool changer Number of tools 40, WZ changer mounted on the side, type chain Max. tool diameter 76 mm, 125 mm with free counter space Max. tool length 300 mm Control Fanuc 18iM Coolant Coolant tank 280 lt. Cooling by the spindle Accessories Operational documentation in English Note The shooting tools, tool holders and cutting tools shown in the pictures are not included

Manufacturer: G?kkaya Machinery Model: AKO?WALL EX KDH 10W Year: 2007 Type: Wall-mounted dissolver   ATEX classification: Ex 1/2GD cEx dem IIAT3 Weight: 500 Kg Diameter of mixing rotor: ? 200 mm Shaft length : 985 mm Up/down stroke: 1150 mm Raise/lower: hydraulic Sew Eurodrive unit: 1.5 Kw Loher motor: 7.5 KW