used HEINRICHSGLÜCK rb

Pipe Cutting Machine Fabr. HEINRICHSGLÜCK Type RBSM 1Komm.-Nr. 4026, machine no. 207086, year of construction 1994CUTTING MACHINE:Workpiece diameter: 100 - 600 mmThree-jaw chuck outer / inner clamping: 193 - 321 mmExternal voltage: 8 - 136 mmInternal tension: 74-201 / 188-315 mmBurning amplitude: 0 - 276 mmBurning diameter: 0 - 390 mmRotary drive motor power: 0.21 kWSpeed: 5.7 rpmCutting speed: 50 - 1800 mm / minWorking height: 1140 mmTotal height: 1620 mmWidth (foot): 700 mmControl: SPS S5-9Lifting table:Load capacity: 800 kgTable height: 350 - 840 mmCentering grooves Drm.:200 - 900 mm (every 100 mm)Table size: 860 x 860 mmSwinging cycle (manual): 90 °Lifting motor: 1.1 kWLifting time approx. 47 sec.End limitation: 2 limit switchesDrive: manualWheel diameter: 80 mmGauge: 580 mmRated voltage: 380VRated operating current: 2 ACONSTRUCTION:2 roller blocks, Rollendrm.:130 mmDistance betwee ...

Welding turning device make HEINRICHSGLÜCK type RA 20Item No. 2171, make -No: D206435, built in 1989Technical specifications:Load capacity: 10 t = 20 tconsisting of- 1 powered rotating device Rollendrm. approx. 200 mm- 1 revolving device Rollendrm. approx. 400 mm smallest distance between the rollers approx. 200 mm largest distance between the rollers approx. 1400 mmused, but in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tilt & Turn Table Fabr. HEINRICHSGLÜCK Type KT 10Capacity: 100 kgFaceplate diameter: 650 mmFaceplate speed: 0.17 - 3.4 rpm.Tilt range: 135 °Dimensions: 720 x 650 x 750 mmWeight approx: 150 kgWith- Hand crankused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Welding turntable make HEINRICHSGLÜCK type H 6Machine -No: 0203994/21796 year of manufacture 1978Technical specifications:Load capacity: 600 kgTurntable diameter: 700 mmExternal dimensions approx.: 1200 x 900 x 1000 mmwith- Infinitely variable speeds- foot switch- tiltableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Technical data: -Total load powered + revolving unit 60000 kg -Load container device 30000 kg -Workpiece diameter 500-4000 mm -Mot Center distance of the support roles. adjustable - diameter 500 mm -Roll width 470 mm -infinitely variable rotary speed 100-1500 mm / min -Torque 5132 NM -Hand-held remote controls for re - and p-drive run - 400 V -Both units are mounted on Rails and -can be moved manually parallel -Space angetr. Unit approx. B H 2800 x 1200 X 1600 mm -Motoryacht. with ongoing unit approx. B H 2800 x 1200 X 1200 mm -Weight angetr. Unit approx. 4800 kg - approximate weight with running unit 3800 kg

Specifications: - Total payload driven + running unit 60000 kg - Payload per container device 30000 kg - Workpiece diameter 500 - 4000 mm - Center distance of the support rollers mot. adjustable - Roll diameter 500 mm - Roll width 470 mm - infinitely adjustable rotation speed 100 - 1500 mm/min - Torque 5132 Nm - Handheld remote control for re- and li.-run - Drive 400 V - Both units are mounted on guide rails and - can be moved manually in parallel - Space requirements Unit approx. W 2800 x H 1200 x D 1600 mm - Platzb. with running unit approx. W 2800 x H 1200 x D 1200 mm - Weight applied. Unit approx. 4800 kg - Weight with running unit approx. 3800 kg

offer 15107 Specifications: - Total load capacity driven + rotating unit 60000 kg - Payload per container device 30000 kg - Workpiece diameter 500 - 4000 mm - Axle distance of the support rollers adjustable - Steel support rollers - Roll diameter 650 mm - Roll width 200 mm - infinitely adjustable rotational speed - Handheld remote control for re- and li. run - Drive 400 V - Space requirements Unit approx. W 5100 x H 1000 x D 1500 mm - Platzb. with running unit approx. W 3500 x H 1000 x D 1000 mm - Weight applied Unit approx. 4500 kg - Weight with running unit approx. 3300 kg

Offer 23205 Specifications: - Total payload driven + moving unit 20000 kg - Load capacity per container 10000 kg - Workpiece diameter approx. 500 - 3500 mm - Wheelbase of the articulated support arms man. adjustable - Roller diameter 4 x per support arm 250 mm - Roll width 4 x per support arm 80 mm - infinitely variable rotation speed approx. 100 - 1500 mm/min - Hand-held remote control for re- and Li. run - Drive 400 V - Space requirements Unit approx. W 1700 x H 1100 x D 1000 mm - Platzb. with running unit approx. W 1700 x H 1100 x D 700 mm - Weight tr. Unit approx. 1400 kg - Weight with running unit approx. 1000 kg

Offer 23216 Specifications: - Total payload driven + moving unit 20000 kg - Load capacity per container 10000 kg - Workpiece diameter approx. 500 - 3500 mm - Wheelbase of the articulated support arms man. adjustable - Roller diameter 4 x per support arm 250 mm - Roll width 4 x per support arm 80 mm - infinitely variable rotation speed approx. 100 - 1500 mm/min - Hand-held remote control for re- and Li. run - Drive 400 V - Space requirements Unit approx. W 1700 x H 1100 x D 1000 mm - Platzb. with running unit approx. W 1700 x H 1100 x D 700 mm - Weight tr. Unit approx. 1400 kg - Weight with running unit approx. 1000 kg

table length: 1050 mm table width: 1050 mm table load: 3,6 t table - tiltable: 0 - 135 ° table rotation: 360 ° table rotation speed: variabel einstellbar U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 2,35 x 1,70 x 2,00 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technische Daten: - Arbeitsdruck 10 t - inklusive viele unterschiedliche Einsätze 1/2\", 3/4\", 1\", 1 1/4\", 1 1/2\", 2\" - für Wasser-, Gas od. andere Formrohre verschiedenster Materialien - selbstreinigender und wartungsarmer Zylinder - automatischer Kolbenrückzug - stabiler Stand durch drei Füße - aufklappbarer Rahmen zum einfachen und schnellen Einlegen des Rohlings - max. Kolbenhub: 155 mm - Abmessungen L=710 , B=590, H=220 mm - Bruttogewicht 48 kg - Nettogewicht 45 kg

Robostar M odel: RBC-11NSA Engine: HC (M) 200 W FS23 ratio: 10 Max RPM. 3000/min Length: 900 mm; ready for operation

Robostar Model: RBC-R Engine: 200W MS (BK) ratio: 10 Max RPM. 3000/min Length: 470 mm; ready for operation

Robostar Model: RBC-71NSA Motor: HC-K (M) FS73 Power: 750W Ration: 10 Max RPM: 3000/min Length: 810 mm; ready for operation

Double toggle jaw crusher, opening: 1200 x 900 mm

Belt/ozilierend swiveling Roll in the table

This packaging machine packed in Doypack stalk. approx. 110 packages per minute Resealable Built in 2007 With smart date 5

This packaging machine packed in Doypack stalk. approx. 110 packages per minute Resealable Built in 2007 With smart date 5

Ready to ship

DATA ON THE MACHINE Machine type: Ironing saw Manufacturer: RUCOCO Model: RBS 230 Condition: used Price 575 Euro net plus VAT Location Warstein , Germany Reference M-RUC-1220 Description We offer you a used ironing saw from the manufacturer RUCOCO incl. 6 spare saw blades (also for stainless steel) Coolant plant Our offer is aimed at professionals who are covered in accordance with section 14 GewO in accordance with the trade order. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!

DATA ON THE MACHINE Machine type: Ironing saw Manufacturer: RUCOCO Model: RBS 230 Condition: used Price 575 Euro net plus VAT Location Warstein , Germany Reference M-RUC-1220 Description We offer you a used ironing saw from the manufacturer RUCOCO incl. 6 spare saw blades (also for stainless steel) Coolant plant Our offer is aimed at professionals who are covered in accordance with section 14 GewO in accordance with the trade order. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!

DATA ON THE MACHINE Machine type: Ironing saw Manufacturer: RUCOCO Model: RBS 230 Condition: used Price 575 Euro net plus VAT Location Warstein , Germany Reference M-RUC-1220 Description We offer you a used ironing saw from the manufacturer RUCOCO incl. 6 spare saw blades (also for stainless steel) Coolant plant Our offer is aimed at professionals who are covered in accordance with section 14 GewO in accordance with the trade order. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!

DATA ON THE MACHINE Machine type: Ironing saw Manufacturer: RUCOCO Model: RBS 230 Condition: used Price 575 Euro net plus VAT Location Warstein , Germany Reference M-RUC-1220 Description We offer you a used ironing saw from the manufacturer RUCOCO incl. 6 spare saw blades (also for stainless steel) Coolant plant Our offer is aimed at professionals who are covered in accordance with section 14 GewO in accordance with the trade order. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!

Sorfort available used

This ROLBATCH RBSDMS-IZS-678 was made in 2016. It is equipped with a Mill PLC control unit. The machine has a maximum film thickness of 0.3-1 mm.