used HEIN luxrotor

Stikken Oven Hein Luxrotor LR-86-2 used rotary oven for bakery by Hein Model Luxrotor LR-86-2 with gas burner and 2 rack trolleys for sale from stock Bielefeld. -Sheet metal size 58x78cm -with 2 Stikkenwagen -each Stikkenwagen with 15 runs -Door stop on the right -with exhaust air hood -with digital control -Year of construction 2011 -400 Volt 3kW 50 Hz -Nominal heat output 74 -External dimensions without hood: Width: 154cm Depth: 142cm Height: 235cm

Gebr. Rack oven Hein Luxrotor LR-86-H, overhauled, 9.6 m², 82 kW, 400 V, 50 Hz, for sheets 60 x 80 cm, with 2 rack trolleys, with touchscreen control, extractor hood, stone wall, without burner, external dimensions (W x D x H) 155 x 142 x 260 cm, year of construction 2011, construction no. 3000857

Used rack oven HEIN, Type: Luxrotor LR 86 -In bakery condition- - for 1 rack trolley 60 x 80 cm - Gas or oil burner - technically tested, immediately ready for use - an overhaul is also possible - Further information on request The furnace is technically tested and immediately ready for use. Viewing and test run are possible by arrangement.

Material: 1.4571/ stainless steel Content: 16 ltr Weight: 2000 kg Length x Width x Height: 2500 mm x 1300 mm x 2000 mm Filter area : 0,12 m² Fill : 16 ltr. Working pressure : 25 bar. Further information: Basic application area: - Suspensions with subtle and subtlest solid materials, which need for fast and optimal dehumidification a high adrift pressure difference.. - Dry sludge, those won coal is compressible and throught strong mechanical pressure arrives a drastic reduction of pore volume - Products, at those a widely dehumidification is possible after cake constitution through a displacement of pore fluid through gas - Suspensions, whose need for unproblematic abscission a degressive or a progressive supply of dehumidification potential. Very good condition. You can also get the entire system with all components you need. Write us below!

Centrifuge ELLER work standing on 3 feet : Manufacturer eller Type: 734 C. Serial No.: 78-043 Year of construction: 1978 Drum diameter: 800 mm Speed: 1,500 rpm Capacity: 120 kg The eller centrifuge is a filter centrifuge for pharmaceuticals, fine chemicals and chemistry industry, at the solid liquid separation happens mechanically. The typical process includes filling, washing of the cake, spin and unloading. A possible criterion is the way the solids are discharged. This determines the respective execution. In very good condition!

The list of equipment for sale from molding line: 1. Moulding Machine HSP-2D (22kW, 70f / h) 2. Lifting table 3. Pressure plate 4. The dispensing sand tank

TO WHOM IT MAY CONCERN; WE'VE 6 PCS USED HEINZMANN CONTROL UNITS AT OUR STOCK. ALL CHECKED IN WORKING CONDITION READY TO TRANSPORT. PLS FIND DETAILS ON BELOW. HEINZMANN CONTROL UNIT: DC 2010 2-01 00 FOR BASIC SYSTEM E RANGE 24V SERIAL NO.: 08 01 000036-2010 : 08 01 000031-2010 : 08 01 000039-2010 : 07 10 000813-2010 : 07 10 000809-2010 : 06 02 000102-2010 IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Table load: 12 to.

High performance blower fan dust blower Built in 1967 Type 1000 275 R MD 63 m³ / s 1000 u/min 71.3 kw Manufacturer Heinrich Lühr dust technology

Technical data: -Total load powered + revolving unit 60000 kg -Load container device 30000 kg -Workpiece diameter 500-4000 mm -Mot Center distance of the support roles. adjustable - diameter 500 mm -Roll width 470 mm -infinitely variable rotary speed 100-1500 mm / min -Torque 5132 NM -Hand-held remote controls for re - and p-drive run - 400 V -Both units are mounted on Rails and -can be moved manually parallel -Space angetr. Unit approx. B H 2800 x 1200 X 1600 mm -Motoryacht. with ongoing unit approx. B H 2800 x 1200 X 1200 mm -Weight angetr. Unit approx. 4800 kg - approximate weight with running unit 3800 kg

2 Process tanks Manufacturer: Heinsch Stainless Steel Processing, Germany Volume: 350 l / per container Double jacket for heating and cooling Material: V4A; 1.4571 Presure resistant: 0.5 bar Temperature: up to 150 C with safety valve, vent, pressure indicator, etc. with integrated removable brewing basket Weight: approx. 340 kg / per container Technical condition: used in excellent operating condition

2 heatable and coolable process vessel Manufacturer: Heinsch Stainless Steel Processing, Germany Volume: 350 l / per container Double jacket for heating and cooling Material: stainless steel V4A; 1.4571 Operating overpressure: 0.5 bar Temperature: up to 150 C with folding lid, safety valve, vent, pressure indicator, etc. with integrated removable brewing basket Stainless steel frame/ frame for receiving the containers Weight: approx. 340 kg / per container Technical condition: used in excellent operating condition

We offer you a used pallet racksystem manufacturer Jung Heinrich for sale. Technical data on the pallet racking system: Shelving system: Jung Heinrich Type: T Technical data for the list: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 19,600 mm Number of fields per row of shelves: 05 pcs. . . . . . . . . . . . . . . . . . . . . . . . . . . . Number of planes plus ground plane: 02 pcs. Technical data on volume: Number of pallet slots per field: 12 pcs. Number of pallet slots per row: 60 pcs. Total number of pallet slots: 60 pcs. based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 450 kg Included are: 06x Pallet rack, used Material color: blue Stand profile: 100 x 65 mm Incl. transverse and diagonal st ...

New floor oven HEIN, type: Shopestone -exhibition exhibitor- - Ring tube oven - electric heating - Number of flocks: 5 pieces - Sheet size holder: 60 x 80 cm - Dimensions: B 1,300 x D 1,700 x H 2,145 mm - Exhibition exhibit - Condition: Very good, ready for immediate use Delivery and installation possible by arrangement.

We offer you a used deep bridge here manufacturer Jung Heinrich for sale. Technical data for the deep bridge: Shelving system: Jung Heinrich Type: Esmena Included are: 01x Deep bridge, used Material color: hot-dip galvanized Type: TEZ Total length: approx. 1,065 mm Inner length: approx. 1,055 mm suitable for stand depth: approx. 1,050 mm Material thickness: approx. 1.50 mm Light support width: approx. 960 mm Profile note: C 75 x 40 x 23 mm Truss support: approx. 45 mm Weight/ pcs. approx. 2,902 kg Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

We offer you here a used pallet rack traverse of the manufacturer Jung Heinrich for sale. Technical data on the pallet rack traverse: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Box profile: 85 x 40 mm Truss type: GN85x41 Agraffe: 5 HK (hook) clear width: 2,775 mm load per pair of trusses 1,023 kg at the same. distributed load 02x locking pins, used Version: kompl. galvanized To secure the longitudinal beams against unintentional lifting out

Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 800 mm We offer you here a used workbench of the manufacturer Jung Heinrich for sale. Included in delivery are: 02x workbench stand, used Material color: blue Frame profile: 76.2 - 100 mm Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 85 x 40 mm Traverse type: GN85x41mm Clear width: 2,775 mm 08x safety pins, used Version: completely galvanized 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,980 mm Depth chipboard: 800 mm Surface: coated if necessary (possibly two-part) 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,755 mm Depth chipboard: 800 mm Surface: coate ...

Frequency Brand: Heinrich Baumüller Type: BKF/12/100/400-2002 Power Converter Not checked for functionality. Sold only to traders!

Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 1,000 mm We offer you here a used workbench of the manufacturer Jung Heinrich for sale. Included in delivery are: 02x workbench stand, used Material color: blue Frame profile: 76.2 - 100 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 85 x 40 mm Traverse type: GN85x41mm Clear width: 2,775 mm 08x safety pins, used Version: completely galvanized 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,980 mm Depth chipboard: 1,000 mm Surface: coated if necessary (possibly two-part) 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,755 mm Depth chipboard: 1,000 mm Surfac ...

Included in delivery: 01x pallet rack traverse, new Material colour: RAL 1007 Daffodil yellow Box profile: 100 x 50 mm Truss type:AUF'B'E0480'2700 Agraffe: 4 HK (hooks) Clear width: 2,700 mm 02x safety pins, new Version: kompl. galvanized To secure the longitudinal members against unintentional lifting Technical data for the pallet rack traverse: Shelving system: Jung Heinrich Type: MPB General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out acco ...

Specifications: - Total payload driven + running unit 60000 kg - Payload per container device 30000 kg - Workpiece diameter 500 - 4000 mm - Center distance of the support rollers mot. adjustable - Roll diameter 500 mm - Roll width 470 mm - infinitely adjustable rotation speed 100 - 1500 mm/min - Torque 5132 Nm - Handheld remote control for re- and li.-run - Drive 400 V - Both units are mounted on guide rails and - can be moved manually in parallel - Space requirements Unit approx. W 2800 x H 1200 x D 1600 mm - Platzb. with running unit approx. W 2800 x H 1200 x D 1200 mm - Weight applied. Unit approx. 4800 kg - Weight with running unit approx. 3800 kg

Size: 2.000 x 6.300 mm - Year of Manufacture: 2003 - With frame

Size: 3.000 x 8.820 mm - Year of Manufacture: 1994 - With part of frame and conveyor belt - Vibrating screen will be overhauled, sandblasted and painted.

Technical data for the pallet rack traverse: Shelving system: Jung Heinrich Type: Esmena Included in delivery are: 01x pallet rack traverse, used Material color: yellow Box profile: 100 x 40 mm Truss type: GN 100x40 Agraffe: 5 HK (hook) Clear width: 4,005 mm load per pair of trusses 1,000 kg at the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

Model North - South, clock wise rotation Belt width 600 mm Tiers 32 pcs. Product gap max. ± 89 mm Belt length 425 m Infeed height 800 mm Outfeed height 5.800 mm Cooling Freon Power 3 x 400V, 50Hz 45 kW total connected power Required cooling capacity: 150 kW Dimensions (l x w x h) : ± 5.660 x 8.080 x 6.530 mm motor compressors and panels not included