7 HEBROCK edge gluing machines used machines

Hebrock Edge gluing machine Edge glue Edge milling machine heating Capping

Key data: 4 mm, 40 mm

Edge banding machine with joining milling machine (incl. DIA tool), with PLC control (incl. touchscreen) with hot-melt adhesive specification on the workpiece for edge material up to 3 mm: maintenance-free, coated glue basin with alternating tank preparation, HF cross-cut sawing station (approx. 16,000 rpm) for front and rear edge protrusion, HF milling station (approx. 16,000 rpm)with interchangeable plate milling cutter (combination design), Fine adjustment of the milling machine from the operator's side (Hebrock system), Corner round milling machine (minimum workpiece length 300 mm, Hoa0Tgpbz max. workpiece thickness 40mm), surface scraper blade incl. pneumatic excavation, robust chain drive, Double roller top pressure, aggregate viewing window of Machine rear and operator side, extendable Workpiece support, feed rate approx. 10 m/min., workpiece thickness 60 mm, incl. 1x al ...

Hebrock edge banding machine K36 with extraction connection Technical data: • Version for R1 (1 mm) • PLC control (incl. touchscreen) • Hot melt adhesive specification on the workpiece for edge material up to 3 mm joining milling machine (incl. DIA tool) • Up to 3 mm milling depth • Maintenance-free coated glue basin with alternating basin pre-installation • Incl. adhesive run-out device • HF cross-cut saw station (approx. 16,000 rpm) • HF milling station (approx. 16,000 rpm) • With pneumatic milling adjustment and interchangeable insert milling cutter (combined version) • Corner round milling machine • Radius scraper blade • Wing scraper blade (incl. pneum. Excavation device) • Cleaning station • Robust chain drive • Ball-bearing double roller top pressure • Unit viewing window from the rear and operating side of the machine • S ...

Key data: 1 mm, 40 mm

Hebrock Euro 2000 edge banding machine – ready for immediate use Our affordable alternative. For sale is a robust and proven Hebrock Euro 2000 edge banding machine from 1993. The machine has been overhauled and is ready for immediate use. Some components have already been repaired: • Several hoses renewed • Replaced several cylinders Despite its age, the machine delivers a clean and reliable work result – typical of Hebrock's solid construction. Technical data: • Voltage: 400V 50 Hz • Connected load: 11.5 kW • Pneumatic roller capping up to max. 3 mm edge thickness • HF cross-cut saw up to 8mm edge thickness • HF combi milling station • Double belt feed • Foldable side outriggers Ideal for smaller workshops or ambitious hobby users who are looking for a functioning edge banding machine. Feel free to take a look at our other offers! m ...

Key data: 1 mm, 50 mm

Hebrock TOP 2000 edge banding machine – overhauled, serviced & ready for immediate use – others just push through – we check! For sale is a Hebrock TOP 2000, built in 2003, in well-maintained and technically revised condition. Radius / chamfer pneumatically adjustable. Heated inlet ruler. The machine has been extensively overhauled by us: • Most of the pneumatic hoses renewed • Replaced several pneumatic cylinders → Typical wear parts have already been dealt with and are unlikely to be an issue in the next few years. Safety switch also renewed. In addition, the machine comes from a company where specialist fitters were regularly on site for maintenance – recognisable by the existing maintenance stickers. → This speaks for a continuously maintained technical condition. Technical data: • Voltage: 400V 50 Hz • Power consumption: 6.9 kW • Current  ...

Excellent condition - Fully operational - Loading / Transport possible! total length: 5250 mm Jointing cutter: 2 pcs. DIA Single Edge Feed: Available suction diameter: 80 mm Chip Collection Box (Crosscut Saw) extension arm (extendable to the front) quick heating adhesive container 50 Hz 35.7 A Adhesive application rapid heating tank heating power 3.2 kW application roller motor power 0.18 kW Cross-Cut Saw Unit motor power 1 x 0.37 kW speed approx. 15000 rpm Corner trimming cutter motor power 1 x 0.37 kW speed approx. 12000 min -1 Accessories with roller conveyor including work cabinet, with edges, 6 drawers DIA jointing cutter 100 x 45.5 x 30 x Z2 DIA jointing cutter 3 pcs. new 100 x 45,5 x 30 x Z2 Leitz reversible knife 12 x 12 x 1.5 circular saw blades Leuco 110 x 3.6 x 22 T = 20

Excellent condition - Fully operational - Loading / Transport possible! maximum workpiece thickness 45 mm minimum workpiece length 220 to 350 mm maximum edge material height 50 mm minimum edge material length for fixed dimensions 330 to 400 mm maximum edge material protrusion top and bottom 2.5 mm Edge material protrusion front approx 10 to 20 mm Edge material rear protrusion ca 10 to 30 mm . minimum workpiece width 90 mm minimum workpiece thickness 10 mm maximum length with extension arm 4269 mm Working length with boom 4269 mm Depth with roller plates 1425 mm Working table height 888 mm Working width with support pushed in 210 mm Working table width with support rail extended 680 mm With milling unit

Type AKV 88 F Without glue tank Max. edge thickness 3 mm Max workpiece height 50 mm Feed speed : 0-7 m/min (0,25kW) Power consumption 3,2 kW Work table height 890 mm Made in Germany 1996 y. Transport dimensions 1360x680x1220 mm Weight 150 kg

Manufacturer: Hebrock, Type: HFF 08, Year: 1993, Min.-max. workpiece height in mm: 15 - 50, Edgeband thickness max mm: 3, Machine lenght mm: 800 x 1400 x 1400, Wight approx. kg: 350, Year :1993

Manufacturer: Hebrock, Type: AKV 2001 DK, Year: 1997, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: 8, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: Radius, Corner tracing type: yes, 1 motor: yes, Radius scraper: yes, Bonding part EVA: yes, FREE TEXT: Zustand sehr gut, Year :1997

A right-sided Hebrock edge banding machine is available. Workpiece thickness range: 10mm-50mm, min. workpiece width: 70mm, min. workpiece length: 250mm, edge thickness (roll material): 0.5mm-5mm, max. edge height: 55mm, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 3000mm/1500mm/1300mm, weight: approx. 700kg. On-site inspection is possible.

Edge banding machine Type: F2 Manufacturer: Hebrock Year: 2014 Edge thickness: 0.4 – 3 mm Material thickness: 8 – 40 mm Working speed: 10 m/min Power supply: 400 V Pre-milling Hot melt adhesive application (EVA) Pressure zone Tape face trimming Radius milling Scrapers Machine in good condition, under power Find more here - / Contact us at -

Manufacturer: Hebrock, Type: AKV 88 F, Year: 1997, Control: hand, Glue application: no, Edgeband thickness max mm: 3,0, Edgeband height max mm: 50, Edgeband thickness max mm: 3,0, Glue system granulate/cartridge: Wärmedusche, Feeding speed min-max m/min: 0-7, Mitre stations: yes, FREE TEXT: Elektronische Eintellung der Kantenlänge, Year :1997

Manufacturer: Hebrock, Type: TF 03, Year: 1998, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Kopierfunktion single sided: yes, Tracing by roller: yes, Arbeitstakt automatisch: yes, Engine milling kW: 0.5, Machine lenght mm: 1000, Compressed air bar: 6, Wight approx. kg: 200, mit Schwabbelstation, Year :1998

This Hebrock TOP 2000 PLUS was manufactured in 2015. A used edge banding machine, it features a gluing unit, cutting unit, and combination milling unit. It handles edge material thickness from 0.5 to 3 mm and can manage workpieces from 10 mm to 45 mm in thickness. Ideal for precise edge finishing tasks. Contact us for more information about this machine.

Edgebander manufactured in 2004. This HEBROCK AKV 3005 DK-F features a maximum edge thickness of 3 mm and accommodates workpiece thicknesses from 8 to 60 mm. It includes a jointing milling unit with 2 milling heads, a gluing tank with a contact roller, and a combination milling unit that is pneumatically adjustable. If you are looking to get high-quality edgebanding capabilities, consider the HEBROCK AKV 3005 DK-F machine we have for sale. Contact us for further details.

Edgebander manufactured in 2004. This HEBROCK AKV 3005 DK-F features a maximum edge thickness of 3 mm and accommodates workpiece thicknesses from 8 to 60 mm. It includes a jointing milling unit with 2 milling heads, a gluing tank with a contact roller, and a combination milling unit that is pneumatically adjustable. If you are looking to get high-quality edgebanding capabilities, consider the HEBROCK AKV 3005 DK-F machine we have for sale. Contact us for further details.

Weld edge former, edge former, edge beveling machine TRUMPFFasing of steel plates for weld seam preparationType TKF 103Sheet thickness: 4 - 25 mmBevel length max: 10mmBevel angle: 30Power: 2000 wattsMains connection: 220 volts, 50 Hz- Equipped with guide bracket for 30 bevel angles - Regrindable butt steel for high tool utilization- Equipped for 20 mm sheet metalFor beveling straight and curved edges with a radius of at least 40 mm.For beveling edges on flat and curved workpieces as well as

Pressing area: 3000 mm x 1800 mm; Design: free-standing; Working Area: 1460mm x 2900mm; Number of manual hydraulic cylinders: 4; Pressing pressure per cylinder: 2000 kg; Cylinder stroke: 70 mm; Hold-down: 1; Machine length: 2900mm; Machine width: 900mm; Machine height: 2000mm;

Edge glue machine HolzHer express 1437 Glue, caps, flush milling, RADIUS milling / Beveling, scraping, cutting tool for rolling edges Total revision 10 years ago everything top Year of construction 1989 L x W x H: 500 x 120 x 170 cm Weight approx. 1800 kg The machine is in top shape, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Type SE-360D Thickness of panel 10-60 mm Edging thickness 0,3-3 mm Feeding speed 13-22 m/min Air pressure 0,6 MPa Voltage 380V/50Hz Total install power 10,5 kW Min. panel dimensions 150(L)x150(W) mm Made in 2017 y. Transport dimensions 4420x900x1560 mm Weight 1400 kg

Machine is still in < operation and fully functional solid up to 20mm rolls PVC to 3 mm caps flush milling RADIUS milling milling Schwabbleln chamfer

Edge glue machine HolzHer express 1437 Edge gluing, flush milling, caps flush milling with chamfer milling or RADIUS milling with sep. Aggregate Schwabelscheiben 2 mm and two units for chamfering or just milling milling ABS edge 2 additional units for RADIUS Hours of operation 1072.5 hours Masch. No. 721/9-203 L x W x H: 400 x 120 x 170 cm Weight approx. 900 kg Built in 1992 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

AUTOMATIC EDGE BANDING machine type HOLZ-HER SPRINT 1411 work hours : 380 work meters : 32.000 CE mark : YES volt. 380/50 composition : 1. gluing unit with cartridge and comb nozzle 2. end trimming unit 3. edge trimming unit 4. tilting edge trimming unit 5. glue scraper

Automatic Edge Banding machine type OCMAC BS 21 . second hand composition : - glue pot - edge-trimming unit (2 motors) Kw 2 each one . rpm 12.000 with cabinet with HF converter Hp 5 volt. 380/50