HANS SCHOEN ute used machines

A hydraulic universal press is offered. Press force: 75t, stroke: 250mm, table surface X/Y: approx. 600mm/500mm, safety distance: 107mm, overrun distance: 18mm. Equipment: manually adjustable stroke limitation (top/bottom), integrated ejector with draw cushion control, analog pressure gauge up to 400bar. Safety device: SICK safety light curtain for the working area. Total weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 1300mm/1800mm/2900mm. Inspection possible by arrangement.

A single-column press is offered. Press force: 30000kg, table area X/Y: approx. 600mm/450mm, protective field height: 300mm, safety distance: 110mm, stopping distance: 18mm. SICK light barrier safety system, manual handwheel adjustment, analog pressure display, external control cabinet, foot switch preparation. Weight: approx. 3200kg, overall dimensions X/Y/Z: 1400mm/1800mm/2400mm. Inspection possible by arrangement.

Key data: 10 t, 300 mm, 300 mm

more info on request

"Lower piston press => table/stroke from bottom to top". Technical data Manufacturer: Hans Schoen Year of construction: 1997 pressing force: 500t table clamping area: 640mm x 800mm mounting height: 380mm stroke: 150mm Find more here - /

Manufacturer: Hans Schoen Model: NH 160 Year of Manufacture: 1988 rebuilt in 2016 The press is being sold without tools or spare parts. Technical Data Press force max.: 1,600 kN Main drive power: 30 kW Speeds Rapid advance from: 300 mm/sec Pressing speed: 18 mm/sec Rapid return: 300 mm/sec Strokes Max. stroke: 150 mm Max. daylight opening: 450 mm Table and Ram Dimensions Ram area: 730 × 560 mm Table area: 650 × 650 mm Openings Front vertical opening: 750 mm Side vertical opening: 250 mm Heights Table height above floor: 850 mm Table bore diameter: 150 mm Ram bore, Ø H7: 60 mm T-slots T-slots in table, DIN 650 H12 diagonal: 22 mm T-slots in ram, DIN 650 H12: 22 mm Two pieces, front to back Machine Dimensions Machine footprint approx.: 1,850 × 1,500 mm Machine height approx.: 2,850 mm Find more here - / Contact us at -

Key data: 300 t, 2 mm, 600 mm

Pressure: 300 tons Distance between the uprights 1800mm Side passages: Yes Installation height: 1000mm Table: 1800x1000mm Plunger: 1800x1000mm Stroke: 600mm Weight: 43 tons Height: 4700mm Siemes S7 Controller Ground-level installation Sick Light Barrier Cushion: Stroke 200mm

Pressure: 300 tons Distance between the uprights 1800mm Side passages: Yes Installation height: 1000mm Table: 1800x1000mm Plunger: 1800x1000mm Stroke: 600mm Weight: 43 tons Height: 4700mm Siemes S7 Controller Ground-level installation Sick Light Barrier Cushion: Stroke 200mm

Centrifugal pump Manufacturer: Hans Schuy GmbH Type: KRP50/832107/6286 Year of construction: 1988 Power: 3.8 kW LWH: 440 x 270 x 400 mm

Centrifugal pump Manufacturer: Hans Schuy GmbH Type: KSP50/6399/772097 Year of construction: 1990 Power: 2.05 kW very good condition LWH: 460 x 240 x 400 mm

M. No.: 1844 Equipment / Additional information: 25 spare wires

M. No.: 61 988

Kniehebelprägepresse - Embossing hot stamping press Hans Schilling HSM Serial-No. 18040 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Key data: 2 mm, 17

Twin screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine No.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx. 30 1/min. Worm torque: 10,000 Nm Motor power: 3.3 - 25.0 kW, Drive motor: Commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool Heating Zones: 8 Temperature control: 12 x digital temperature controller KS 40 (PMA) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tools) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material funnel and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hoppe ...

Werkend uit productie, heeft altijd gelopen met een 800 mm extrusiekop voor het produceren van HDPE buizen. Bwj Uswr Db Nod Dvycjw

The new Hans Schreiner infinitely variable turning lathe with leading spindle and feed rod and cross feed. Hardened and cut bed and gear wheels. Main spindle, tapered roller bearings and v-ledges. Camlock mount C4, top slide ratatable by 360°, tailstock adjustment +/- 5 mm for taper turning. Good metal-cutting performance, infinitely variable speed via electronic speed control with digital speed indicator. Incl. three-jaw chuck 160 mm and steady rest. Technical data: Center height 140mm Distance between centers 650 mm max. turning diameter 289 mm Spindle bore 38 mm Spindle cone MK 5 Clamping cone tailstock MK 3 Spindle speeds 50 - 1125 RPM and 100 to 2250 RPM Speeds 2 Main motor power 1,5 kW S6 Voltage 230 Volt Weight 230 kg Standard equipment: 3-jaw chuck 160 mm with changeable jaws for internal turning center point Optional equipment: 2 axis digita ...

Drilling and milling machine Hans Schreiner ZAY7040G, built in 2009, very good condition, 1.5 kW, 800 mm table length, 240 mm table width, 300 kgPrices subject to change, errors, printing and typesetting errors excepted

Precision full gear, lead, pull, shift spindle lathe, bed and gear gears hardened and ground. Main spindle, tapered roller bearings and wedge bars plan/upper slide can be adjusted. Camlock mount C5, upper slide 360 rotatable. Tailstock adjustment +/- 5 mm for taper turning,High clamping capacity, DIN acceptance protocol, operating and spare parts list.Dial rings metricWith 3-axis Sino digital display and removable bedStandard equipment:Sino 3-axis digital displayTool Quick-change holder E

Hans Schreiner Metal LatheSuperut 1500 DigitalTechnical data:Center height 250 mm, center width 1500 mm, max. turning diameter 500 mm, spindle mount Camlock 8, hollow spindle 80 mm, tailstock cone MK5, spindle speed 24 to 1600 rpm, speeds 15, main motor output power 7.5 kW, max. diameter over face slide 300 mm, max. turning diameter i.d. bridge 630 mm, longitudinal feed 0.07 - 4 mm/revolution, transverse feed 0.02 - 1.35 mm/revolution, metr. Thread 0.5 - 28 mm pitch, inch thread 56 - 1 gears/inch, module thread module 0.5 - 3.5, thread diametrically pitch 56 - 8,

Exhibition machine! Standard equipment: SDS2-3L Sino 3-axis digital display. Base frame, halogen lamp, jaw American 160 mm, 4-jaw American 160 mm, face plate 250mm, 2 steady restsTechnical data:Tip height 160 mm, center width 900 mm, max. turning diameter 460 mm, spindle bore 38 mm, spindle cone MK5, spindle speed 65 to 1810 rpm, speeds 18, main motor output power 2 Kw S6 ( 1.5 Kw S1), weight 510 kgSymbol photoPrices subject to change, errors, printing and typesetting errors excepted

Lathe Hans Schreiner MDB-S900, YOC 2015, good condition, 1.5 kW , 900 mm center height, 165 mm center height, 65-1810 rpm, 500 kgPrices subject to change, errors, printing and typesetting errors excepted

Hans Schreiner drilling,- & milling machine with 90° pivoting gear head and variable speed for the commercial demand. With halogenlamp and coolant system. Technical data: Spindle cone MT 4 Motor output power S1 1,5 kW, 400 V Weight 310 kg Table dimensions 800 x 240 mm max. workpiece height 400 mm Speeds 50 - 530 and 530 - 2600 rpm Max. drilling capacity in steel 45 mm Worktable travel x=500mm, Y= 175 mm Optional equipment: Underframe with coolant tub Drill chuck, quick release chuck, milling cutter and tools

Hans Schreiner metal bandsaw with pivoting cutter arm, for the professional, with soft hydraulic for the correct pressure, electrical coolant system for all kind of metals, steels and Nirosta, quick clamping vice automatic cut stop, the semi-automatic control with preprogrammed cycle (user starts - clamping workpiece - cutting - saw arm resetting - unclamp workpiece) is optional at the MBS370SA for metal worker and workshops with small - and mass serial products. Strengthened frame for more stability. CE conform Technical Data: Motor: 400V,50Hz Reduce gear rate: 25:1 Wheel diameter: 380mm Blade size: 3160x27x0.9mm Blade speed: 34 or 68 m/min Cutting angle: 45°L, 30°L, 15°L, 0°, 15°R, 30°R, 45°R, 60°R Coolant pump: 400V, 50Hz, 3~, 25W Packing size: 1770x765x1120mm Weight: 365 kg

Demonstration machineYear of manufacture 2021Hans Schreiner metal band saw with swivel arm, for professionals, with soft hydraulics for the right cutting pressure, electric coolant system, for all metals, steels and stainless steel. Quick-release vise. Choice of automatic operation and manual operation can be easily switched. Automatic belt shutdown, price with base, reinforced frame for more stability, CE compliantTechnical data:Motor output power up to 1.9kW S6 (1.5kW S1)

Demonstration machineTechnical data:Motor output power 3 hp at 100 % ED, voltage 400V, extraction capacity 3900 m³/h, extraction connection 150 mm, distributor 3 x 100 mm, dimensions L x W x H = 150 x 75x 220 cm, weight approx. 60 kgPrices subject to change, errors, printing and typesetting errors excepted

Used belt dryer from Hans Binder Specifications: belt width 2.62m Length of belts 14m total length 25m total height 6.2m total width 2.9m 5 levels of drying belt The dryer has 2 heating zones 1- 60-110 degrees. C, 2-70-90 deg. C The tape is made of perferized stainless steel tape. has brushes for cleaning the tape apples, celery, dill, beets were dried. Year of manufacture 1997 Gas burner dryer.