used GERARDI gm

Mechanical NC machine vice GERARDI precision machine vice, clamp jaw width 150 mm jaw height 40 mm wingspan 0 to 200 mm clamping pressure approx. 3 ton. Guideway height 50 mm Guideway length 420 mm- Mechanical machine vice - Quick adjustment with clamping ball lock - Clamping range via trapezoidal spindle approx. 60 mm- Stable base body ground on all sides- Horizontal, vertical or laterally clampable - Guideway with 14 and 16 mm Guide groove Dimensions L x W x H 420 x 150 x 100 mm Weight: 27 kg very good condition; used

Angle Head ALBERTI - GERARDI TCU90 - 3.5, Inclinable 0-90°, Attachement 40 DIN 2080, Taper ER32, Max Torque max 29 Nm, Power max 10 Kw, Max rpm 4000, Gear ratio1:1, Max tool diameter 20 mm, Information about technical data are not binding., Machine available subject to prior sale.

Machine vise, stable vise, milling machine vise, modular vise -Manufacturer: Gerardi, Modular Vise - Jaw width: 195 mm - Jaw height: 60 mm -Clamping range: 345 mm -Total dimensions: 595/195/H130 mm -Quantity: 1 piece available -Weight: 63kg

Machine vice, stable vice, milling machine vice, modular vice -Manufacturer: Gerardi, Modular Vice -Jaw width: 195 mm -Back height: 60 mm -Clamping range: 450 mm -Dimensions: 695/195/H130 mm -Weight: 70 kg

thickness of jaw: 150 mm : 50 mm clamping width: 150 mm length in total: 420 mm weight of the machine ca.: 25,5 kg dimensions of the machine ca.: 420 x 150 mm Best selling universal vise Bake pressure down Clamping force up to 40 KN High tolerance 60 / 62 HRc Accesories: - Heart plates - Key - Interchangeable workpiece stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 125 mm : 40 clamping width: 125 mm length in total: 345 mm weight of the machine ca.: 12,9 kg dimensions of the machine ca.: 410 x 125 mm Best selling universal vise Bake pressure down Clamping force up to 40 KN High tolerance 60 / 62 HRc Accesories: - Heart plates - Key - Interchangeable workpiece stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 200 mm : 65 mm clamping width: 200 mm length in total: 655 mm weight of the machine ca.: 74 kg dimensions of the machine ca.: 655 x 200 mm Best selling universal vise Bake pressure down Clamping force up to 40 KN High tolerance 60 / 62 HRc Accesories: - Heart plates - Key - Interchangeable workpiece stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compact blowers, used Manufacturer Aerzen Series GMa, size 13 Design Rootsverdichter More information and photos on request.

- Distance between columns: 2800 mm - Longitudinal travel – X axis: 6000 mm - Cross travel – Y axis: 3000 mm - Vertical travel – Z axis: 1500 mm - Spindle taper: ISO-50 (DIN69871) - Power of main motor: 37 / 45 kW - Spindle speed: 3000 rpm - Working feed: 0-10000 mm/min - Rapid feed X/Y/Z: 15000 mm/min - Centralized hydraulic and lubrication unit - Electrical devices: 380V, 3 phases, 50 Hz - AC servomotors (brushless) - Control of the machine Fanuc CNC - External/Internal tool cooling unit - Heidenhain linear scales for axes - Chain type chip conveyor - Levelling devices for foundation, 1 set. OPTION (not included in the price of standard machine) - TU-37 universal automatic milling head (37 kW, 3000 rpm, 1500 Nm, ISO-50, internal-external tool cooling, 2.5° indexing in 2 planes). - Automatic Tool Changer with 40 posts for milling tools. - Floor p ...

Low pressure blower GMB 14.8, Y.O.M. 1994, with 11.8 m3/min. volume flow at delta-P = 360 mbar, P1 = 0.64 bar. Drive 44 kW / 1.485 UPM, with check valve, overpressure valve, tank, air filter, base and sound insulation hood.

Low-pressure blower GMB 14.8, built 1994, with 11,8 m³/min. volume stream at delta-P = 360 mbar, P1 = 0,64 bar. 44 kW / 1.485 RPM drive, with flow check valve, pressure-limiting valve, tank, air filter, base frame and sound insulation hood.

The rotary piston blower is general-outdated. of the blowers is also to be had with impulse.

The blower is with side admittance completely with impulse.

Jar cap inside lid feeder. This has been in use in the cosmetics industry. At the moment the lid size is 40 mm ( 5 mm )

The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

Material conveying stations for powdered materials, on movable base, with material dropler in V2A (dimensions 700 mm x 700 mm, incl. protective grille inside), blow-through cell wheel lock in V2A (200 mm , 0.55 kW drive) Fabr. Seeger, AerzenER GMA rotary piston blower incl. drive, air filter, compensating vessel and control cabinet.

The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

Mobile pneumatic conveyor unit for powdery products, on base frame, with stainless steel feeding hopper (700 mm x 700 mm, incl. safety grid inside), blow-through rotary vane in stainless steel (200 mm Ø, 0,55 kW drive) by Seeger, Aerzener GMA-blower incl. Drive, air filter, compensation tank and switchgear cabinet.

Power: 22 m3/min., Delta P 320 = mbar, 30 kW, (10.6 kW at 1690 RPM)

AERZEN rotary blower GMB 14.8 - used, reconditioned - DESCRIPTION 3-bladed fan speed with integrated pulsation reduction Basic rack with integrated discharge silencer Tensioning device for the belt drive Pressure / vacuum valve Connection box with built-in non-return valve and flange for valve and starting discharge Drive motor (three phase motor) MANUFACTURER'S SPECIFICATIONS Manufacturer: Aerzen, Germany Type: GMB 14.8 YOM: 1976 TECHNICAL DATA Intake rate: 15,5 m ³/min Flow pressure: 0,73bar (max. 1,0 bar) Delta p: 730mbar Blower rev: 1.337rpm Motor: VEM 37kW 380Volts 50Hertz 1.460rpm CONDITION used, reconditioned, ready for operation SERVICE/RECONDITIONING New pulsation silencer box, new oil, new spray painting VISIT Please visit us at any time for an inspection. Test run is possible. REMARK Large stock of used machinery and equ ...

68 kW (engine = 75 kW), 1,580 rpm, 40 m ³ / min, P 1 = 1 bar, p 2 a = 0.8 bar, Delta P = 0.8 bar, with silencer, exhaust silencer, non-return valve

Material: mild steel Reel in stainless steel;

The fan speed is refurbished, can be supplied as a complete unit.

The fan speed is refurbished, all wear parts are new, can be offered as a complete unit.

The fan speed is refurbished, can be supplied as a complete unit.