used GER rs

grinding length:650 mm grinding width:450 mm workpiece height:425 (ohne Magnetplatte) mm max. workpiece weight:600 kg weight of the machine ca.:3,8 t total power requirement:15 kW machine dimensions approx. WxHxD:3,0 x 2,4 x 2,3 m Used/reconditioned surface grinding machine, make GER, type RSA-650. Automatic infeed in all 3 axes. Machine geometrically overhauled, repainted (RAL6011, green), all functions tested, accuracy checked. OVERHAUL SCOPE: Machine completely disassembled, all components thoroughly cleaned and tested for complete functionality. Main spindle newly mounted, concentricity 3 µ. All guideways newly scraped in new machine geometry. Wear parts replaced, defective components repaired or replaced. Reassembly, complete functional test and internal acceptance. Machine repainted. Machine in perfect condition, ready for production. MEASURED GEOMETRIC ACCURACIES: Actual geometri ...

grinding length:650 mm grinding width:450 mm workpiece height:425 (ohne Magnetplatte) mm max. workpiece weight:600 kg weight of the machine ca.:3,8 t total power requirement:15 kW machine dimensions approx. WxHxD:3,0 x 2,4 x 2,3 m Used/reconditioned surface grinding machine, make GER, type RSA-650. Automatic infeed in all 3 axes. Machine geometrically overhauled, repainted (RAL6011, green), all functions tested, accuracy checked. OVERHAUL SCOPE: Machine completely disassembled, all components thoroughly cleaned and tested for complete functionality. Main spindle newly mounted, concentricity 3 µ. All guideways newly scraped in new machine geometry. Wear parts replaced, defective components repaired or replaced. Reassembly, complete functional test and internal acceptance. Machine repainted. Machine in perfect condition, ready for production. MEASURED GEOMETRIC ACCURACIES: Actual geometri ...

Grinding diameter: 230 mm Grinding length: 450 mm Workpiece weight: 0 kg MACH-id   3531 MAKE  GER Spain TYPE  RHL 450 YEAR  80 er SPECIFICATIONS Cylindical / Surface / Other  Cylindrical Grinding diameter Ø  230 mm Grinding length  450 mm Grinding wheel size  350 x 50 x 127 mm kW power on spindle  3 kW Spindle speeds / ranges   2600 Rpm DIMENSIONS Length  2600 mm Width  1600 mm Height   2000 mm Ger Cylindrical grinder for sale, the type is RHL 450.  

Ger RHC1500 Universal Rectifier. Indoor head. Distance between points: 1500mm. Maximum part diameter: 355mm. Point height: 180mm. Tooth diameter: 400mm. Power: 7.5hp. Weight: 4500Kgs.

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

GER RHC-600 grinding machine in very good condition, perfect and periodic operation (350-400mm grinding wheel)

Manufacturer GER Model CM 2500 CNC Year 2000 CNC FAGOR 8055 Characteristics Distance between centre 2.500 mm. Centre height 300 mm Max grinding diameter 595 mm. Max weight between centers 2.000 kg. Max weight grinding on air 350 kg. Longitudinal movement Max programable speed 6.000 mm/min. Min programable increase 0.001 mm Cross movement Max.programable speed 6.000 mm/min Min programable increase 0.001 mm. Various Max. grinding wheel size Ø 500/80 mm. Grinding wheel Cutting Speed 45 m/s Parts Holder Centre Cone C.M.6 Centre Cone Tailstock C.M.6 2 Steady Rests INCLUDED Machine weight 12.000 kg.

Key data: 1000 mm, 500 mm

GER (License ELB) Surface Grinding Machine Type RS 1000 Condition: very good Table longitudinal travel: 1000 mm Table cross-travel: 500 mm Vertical travel: 500 mm Grinding wheel dimension: 300 x 50 x 76 mm bore Spindle power: 7.5 kW Dimensions: approx: 3,000 x 2050 x 2,400 mm Weight: approx. 4000 kg Accessories: Electro-magnetic panne plate; coolant device; Legs The machine is suitable for repair operation; Repair, toolmaking and is very easy to use. Price net plus VAT plus loading costs

Type: VGL 5000. Double-current mixer in standard steel version with 5,000 l. useful content, cylindrical mixing tank and conical bottom, with vertical middle screw, distribution arm and power line controller, rectangular connector for pocket filter, manhole, lower Screw bearing with air flushing, pneumatic flat slider at the outlet.

Type: VGL 5000. Dual-flow mixer in carbon steel design with 5.000 l. net capacity, cylindrical mixing container with conical bottom, with vertical center screw, divider arm and flow disc, rectangular connection for pocket filter, manhole, lower screw bearing with air flushing device, pneumatic flat valve at output.

used, kpl. 1 year warranty, plate size 630 x 630 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 350 liters, filter area 28m2, dimensions 4200 x 1100 x 1700 mm, weight 2 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

Bottles-cleansing machine 12000 bottles / h completely V2A

Geroldinger feeding station with electric heating and cell feeder.

Dosing scale with precision spiral screw feeder in stainless steel version, with pre-container and weighing frame in frame, trough dimensions: 540 mm long x 370 mm wide x 320 mm high, with large loosening spiral in the trough, drive 0.47 kW via timing belt and Reduction gearbox, discharge pipe diameter: 50 mm.

Dosing scale with precision spiral screw dosing device in stainless steel design, incl. base frame, trough dimensions: 540 mm long x 370 mm wide x 320 mm high, with big aeration screw inside the trough, 0,47 kW drive via belt and gearbox, outlet tube diameter: 50 mm.

Dosing scale with precision spiral screw dosing device in stainless steel design, incl. base frame, trough dimensions: 540 mm long x 370 mm wide x 320 mm high, with big aeration screw inside the trough, 0,47 kW drive via belt and gearbox, outlet tube diameter: 50 mm.

Dosing scale with precision spiral screw dosing device in stainless steel design, incl. base frame, trough dimensions: 540 mm long x 370 mm wide x 320 mm high, with big aeration screw inside the trough, 0,47 kW drive via belt and gearbox, outlet tube diameter: 50 mm.

Dosing scale with precision spiral screw dosing device in stainless steel design, incl. base frame, trough dimensions: 540 mm long x 370 mm wide x 320 mm high, with big aeration screw inside the trough, 0,47 kW drive via belt and gearbox, outlet tube diameter: 50 mm.

Dosing scale with precision spiral screw dosing device in stainless steel design, incl. base frame, trough dimensions: 540 mm long x 370 mm wide x 320 mm high, with big aeration screw inside the trough, 0,47 kW drive via belt and gearbox, outlet tube diameter: 50 mm.

Dosing scale with precision spiral screw dosing device in stainless steel design, incl. base frame, trough dimensions: 540 mm long x 370 mm wide x 320 mm high, with big aeration screw inside the trough, 0,47 kW drive via belt and gearbox, outlet tube diameter: 50 mm.

Dosing scale with precision spiral screw dosing device in stainless steel design, incl. base frame, trough dimensions: 540 mm long x 370 mm wide x 320 mm high, with big aeration screw inside the trough, 0,47 kW drive via belt and gearbox, outlet tube diameter: 50 mm.

Dosing scale with precision spiral screw dosing device in stainless steel design, incl. base frame, trough dimensions: 540 mm long x 370 mm wide x 320 mm high, with big aeration screw inside the trough, 0,47 kW drive via belt and gearbox, outlet tube diameter: 50 mm.

Dosing scale with precision spiral screw dosing device in stainless steel design, incl. base frame, trough dimensions: 540 mm long x 370 mm wide x 320 mm high, with big aeration screw inside the trough, 0,47 kW drive via belt and gearbox, outlet tube diameter: 50 mm.

Bottle washing machine Gera Type: Arcade DS02/110/12 Year of construction: 1993 with 12 bottles in the row Bottle cell: up to 1,0ltr. Capacity: 9.500 bph with Siemens S5 control complete stainless steel machine with pre-soaking, automatic lable removal system and double cautic bath

Spare parts for table drilling rig SVO / Stankoimport / Gertner, Fuhrmeister & CO Such as. complete drilling spindle SK50 (Please note the attached pdf-file with a drawing of the spindle) Ball roller spindles from the three axes Electric motors, feed motor 3x, main spindle motor complete control Siemens or control cabinet Control panel with digital device Glass mass Removable flat disc diameter 360mm Radial movement of the support of the flat disc 100mm Transformer / Transformer Angular drill head Sub-apparatus Spindle diameter 110 mm Tool holder ISO 50 Technical data of the original machine Travel laengs approx. 1,000 mm Cross-travel approx. 1,600 mm Vertical travel 1,000mm Laeng movement of the extendable spindle 710mm Speed range 10-1.250 rpm Main engine 11kw Speeds 10 - 1,250 rpm in 22 gear stages Extensive machine documentation including user manual ...