Model
(Manufacturer: FRYMA)
Factory number: L10113 Y.O.M.: 1984 Workspace pressure-resistant 4 bar with funnel, switchgear 380 V Circulation line with three-way valve Power: 0.75 kW Grinding set cross-toothed good condition LWH: 300 x 300 x 650 mm Weight: approx. 30 kg
Machine number: M16694 Y.O.M.: 1995 Working pressure: 6 bar Double jacket: 6 bar Grinding set normally toothed Power: 60 kW case with double jacket Product-in-outlet milk pipe double-acting mechanical seal LWH: 1100 x 700 x 800 mm Weight: approx. 350 kg
Y.O.M.: 1991 Machine No.: M15177278 Power: 18.5 kW with funnel, circulating line with three-way valve LWH: 800 x 600 x 1600 mm Weight: approx. 250 kg Attention: no mechanical seal included, can be reinstalled upon request
No.: L13457 Y.O.M.: 1990 Pressure working space: 4 bar Pressure double jacket: 4 bar Double-acting mechanical seal Locking pressure station speed-controlled scraper Condition good various spare parts: seals, mechanical seals Dimensions LWH: 1100 x 900 x 1750 mm Weight: approx. 900 kg
No.: 16965 Y.O.M.: 1996 Power: 46 kW total Pressure product room: 4 bar Pressure double coat: 2 bar Temperature max: 130°C Stainless steel version, Pharma water-cooled engine Double-acting mechanical seal with locking pressure station overhauled, very good condition Dimensions LWH: 2000 x 1700 x 2200 mm Weight: approx. 1.4 t
N°: 42969/00 Y.O.M.: 2000 Power: 3.37 kW total Pressure product room: 2 bar pressure-monitored, temperature-monitored Material Product space: Alumium oxide ceramic Feeding pump, hose pump, speed-controlled Rotor speed-controlled Machine unused and as good as new Dimensions LWH: 1000 x 500 x 800 mm Weight: approx. 300 kg
No: M17822 Y.O.M.: 1998 Double-acting mechanical seal Locking pressure station Stainless steel speed-controlled feed pump Dimensions LWH: 1200 x 1900 x 1100 mm Weight: approx. 500 kg
Peforated disc mill Manufacturer: Fryma Type: ML 180 No.: M10451 Power: 7.5 kW with hopper (volume: ca. 100 l) with feed screw (speed-controlled) on mobile cart with control cabinet LWH: 800 x 700 x 2400 mm Weight: ca. 250 kg
Y.O.M.: 1980 No.: 10027 Usable volume: 150 l Pressure double jacket: +1 bar Vacuum pump Pressure gauge, temp gauge Scraper agitator, three-way valve 3 intake ducts Lid to be opened via lifting pull Dimensions LWH: 1700 x 1000 x 2100 mm Weight: approx. 500 kg Products: e.g. mayonnaise, sauces, ketchup, cosmetics, creams etc.
Power: 22 HP, 2880 min-1 EMB electric motors AG Switzerland Stainless steel housing Hopper with feeding screw Dimensions: LWH = 400x400x1300mm (without screw) Weight: 300 kg
No.: 12690 Year of construction: 1987 top condition Head with jacket Hopper and discharge chute Power: 2.2 kW Off switch available Dimensions: LBM = 300x400x770mm Weight: approx. 45 kg
General SKU016G043 MakeFryma AG Rheinfelden TypeMSZ-12 No.M-15149 Year of construction1991 LocationBarneveld Material Housing materialMild steel Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialMild steel Volume0.5 Ltr. Motor3 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillCoBall mill (1x) Capacity0,54 Ltr Housing dimensions dia. 140x90mm With mechanical sealcheck With jacketcheck Motor± 3,0 KW, 380 Volt (Ex) With variable speed drivecheck Capacity10-20 Ltr/Hr (paint/varnish) With pumpcheck Motorcheck Information With switchcheck Floorspace1,0x0,6 M Total height0,8 M Weight200 KG ATEX compatiblecheckDiscountSand millsFrymaDiscountMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any des ...
General SKU041H138 MakeFryma Maschinen GmbH Rheinfelden TypeMSM-12 No.L-14038 Year of construction1993 LocationBarneveld Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume0.5 Ltr. Motor3 KW Specified Features - Sand mill MaterialStainless steel Attritorcheck Vertical sandmillCoBall mill (1x) Capacity± 0,5 Ltr Housing dimensions dia. 140x90mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor3 kW, 380 Volt (Ex) With variable speed drivecheck Capacity10-20 Ltr/Hr (paint/varnish) With pumpcheck With variable speed drivecheck Information With switchcheck With switchgearcheck (as is) Floorspace0,9x0,6 m Total height0,8 m Weight220 kg ATEX compatiblecheckDiscountSand millsFrymaDiscountMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- ...
General SKU070C323 MakeFryma Maschinen AG Rheinfelden TypeMSM-32 No.M-10922 Year of construction1984 LocationBarneveld Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialMild steel Volume2.4 Ltr. Motor22 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillCoBall mill (1x) Capacity2,42 Ltr Housing dimensions dia. 350x210mm, Rotor dia. 340mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor22,0 KW, 380/660 Volt (IP54) Rotor speed± 580 Rpm Capacity90-180 Ltr/Hr (paint/varnishes) Information With switchcheck Floorspace1,4x0,8 M Total height1,7 M Technical specs Extra informationRotor dia. 340mmDiscountSand millsFrymaDiscountMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any dest ...
General SKU274K293 LocationBarneveld MakeFryma Maschinenbau GmbH Rheinfelden TypeMSZ-12 No.M-12360 Pressure Working pressure2.5 Bar Main Features MaterialMild steel Volume0.5 Ltr. Motor2.2 KW Specified Features - Sand mill MaterialMild steel Vertical sandmillCoBall mill (1x) Capacity0,5 Ltr With mechanical sealcheck With jacketcheck Rotor jacketed2 bar Motor2,2 KW, 220/380 Volt (Ex) Capacity10-20 Ltr/Hr (paint/varnish) With pumpcheck Motor0,08 KW, 220/380 Volt (Ex) With variable speed drivecheck Information Year of construction1986 With switchcheck Floorspace0,7x0,6 M Total height0,8 M ATEX compatiblecheckSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld ...
General SKU309S509 LocationBarneveld MakeFryma Maschinen AG (CH) TypeMSS-18 No.M14237 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume1.1 Ltr. Motor5.5 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillcheck Capacity1,1 Ltr. Housing dimensions dia. 200x135mm Inletdia. 12mm Outletdia. 12mm With mechanical sealcheck With jacket(0,12 m2) Rotor jacketed(0,06 m2) Motor5,5 kW 380 Volt With balls(Soda Glass) Natronglas 1,2-1,4mm With pumphose (peristaltic) pump. Motor0.25 kW 380/220 Volt Information Year of construction1990 With switchcheck Floorspace1,3x0,9 M Total height1,7 M Weight350 KgSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination w ...
General SKU290S395 MakeFryma Rheinfelden TypeVE / III NumberF 70.1286 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Motor2.3 KW Inlet diameter35 mm Specified Features - Deaerators Vacuum de-aeratorcheck Vessel capacity300 Ltr. Vessel diameter800mm Cylindrical height225mm Conical height1100mm With centrifugal discdia. 650mm, disc speed 1410 Rpm Motor2.3 kW, 380 Volt With vacuum pumpcheck Motor3 kW, 380 Volt With product pumpNetzsch, type NE-50 Motor2.6 kW, 380 Volt With variable speed drivecheck MaterialStainless steel Information Year of construction1970 LocationBarneveld Mounted on wheelscheck With switchgearcheck Floorspace3.1x1.3M Total height2.2M Weight650 KgDeaeratorsFrymaDe-aerators > DeaeratorsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shi ...
The FrymaKoruma MZM/VK7 is a laboratory and product development–scale toothed colloid mill, emulsifier, vacuum mixer or homogeniser designed for efficient liquid–solid phase refining, homogenizing, dispersing and emulsifying liquid to highly viscous products. It is suitable for the production of creams, ointments, gels, similar formulations or food products. The unit was previously operated in a mayonnaise production facility. The machine is mounted on a stainless steel frame equipped with two wheels, allowing for easy mobility. It features a double-jacketed conical hopper with an approximate working volume of 10 litres. The hopper is fitted with a lid incorporating a scraper agitator (0.09 kW, 380/220 V), a pressure indicator (–1000 mbar to 0 bar), and an inspection light with glass wiper. Two small open side hoppers with manual valves are provided for ingredient dosing. The syste ...
General SKU445W1478 MakeFryma LocationBarneveld TypeMZ 80 A Motor Motor power3.3 kiloWatt Main Features MaterialStainless steel Motor3.3 KW Inlet diameter50 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesDia. 70 x 85 mm Cross teethed rotorcheck With hoppercheck InletDia. 50 mm OutletDia. 40 mm Motor3,3 kW, 380 volt, 2860 rpm, (Ex) Speed2860 rpm Materialstainless steel 1.4003, Stainless steel 1.4552 Information No.M14696 Year of construction1990 Mounted on framecheck Floorspace0,50x0,60 m Total height1,20 m Weight92 kg ATEX compatiblecheckColloid millsFrymaMills > Colloid millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneve ...
General SKU320T826 MakeFryma Maschinen AG (CH) LocationBarneveld TypeDT 150 Pressure Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume150 Ltr. Motor7.5 KW Specified Features - Processing vessel MaterialStainless steel 1.4301 (304) Closed stirring vesselcheck Capacity150 Ltr. Vessel sizesdia. 650x600 mm Dished bottomcheck Flat top sidecheck With covercheck Outletdia. 35 mm With jacket21 Ltr. Max. temperature150 °C With propellor stirrercheck With anchor stirrercheck With dissolver stirrercheck Motoranchor: 2,2 kW 220/380 Volt: dissolver: 7,5 kW 380 Volt Speed mixing shaftanchor: 48 rpm: dissolver: 1450 rpm Information No.M12844 Year of construction1987 Floorspace1,8x1,2 m Total height2,8 m Weight1140 kgProcessing vesselsFrymaProcessing vessels > Processing vesselsBrand > Fryma What you can expect from Foeth: - ...
Vertical version with hopper For wet grinding of liquid and highly viscous suspensions and emulsions Grinding disc diam. 100 mm Capacity approx. 200-1000 kg/h Parts in contact with the product made of stainless steel Mechanical seal Cross-toothed Feed hopper Manual grinding gap adjustment 3-way tap at the outlet Max. Overpressure 1 bar Drive 380 V, 4.0 kW, 2,830 rpm Mounted on plastic pallet
General SKUR0079 LocationBarneveld MakeFryma Maschinen AG (CH) TypeVME-12/C Pressure Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume12 Ltr. Motor3 KW Specified Features - Processing vessel MaterialStainless steel 1.4435 (316L) Closed stirring vesselcheck Capacity20 ltr. (nett 12 ltr.) Vessel sizesdia.310x300mm Dished bottomcheck Flat top sidecheck With covercheck Top connectionsdia. 20mm (1x) dia. 12mm (1x) Outletdia. 20mm With jacketcheck Counter rotating stirrercheck Motor(2x) 3 kW 240/415 Volt / 0,75 kW 415 Volt Information No.M15101 Year of construction1992 With switchgearcheck Floorspace1,7x1,0 M Total height1,9 M Weight800 Kg Extra Specificationspart of the agitator is missing, : a shaft is mounted on which mixing accessories can be mounted. Barrel is tiltableProcessing vesselsFrymaProcessing vessels > ...
General SKU354T1008 Makefrymakoruma LocationBarneveld CEcheck TypeVME-12 Pressure Vacuum possiblecheck Working pressure jacket5 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor0.5 KW Specified Features - Processing vessel MaterialStainless steel 1.4429 (316 LN), Stainless steel 1.4301 (304), Stainless steel 1.4306 (304L), Stainless steel 1.4571 (316Ti) Open stirring vesselcheck CapacityWork volume 12 litres (± 20 litres gross volume) Vessel sizesDia: 300x300 mm With covercheck Top connections1/2, 25 mm Outlet25 mm With jacketcheck With anchor stirrercheck With dissolver stirrercheck Motor0,5 kW, 220/380 Volt With homogenisercheck Motor0,12 kW, 380 Volt Information No.F.70.5908 Year of construction1982 Mounted on legscheck With switchcheck With switchgearcheck (as is) Floorspace1,15x0,7 m Total height1,8 m Weight350 kgProcessing vesselsFry ...
General SKU325X666 MakeFryma TypeMSM-32 No.M-14370/71 Year of construction1990 Mounted on framecheck Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume2.4 Ltr. Motor22 KW Specified Features - Sand mill Vertical sandmillcheck (Co-ball mill) Capacity2,4l Housing dimensions Dia. 350x210 mm InletDia. 30 mm OutletDia. 25 mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor22 kW, 380/660 volt Rotor speedApprox 580 rpm Capacity180 l/h MaterialNimonic 2.4951 Information LocationBarneveld With switchcheck Floorspace1,10x1,30 m Total height1,76 mSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Bar ...
General SKU202U012 LocationBarneveld MakeFryma-Maschinenbau GMBH TypeMS-18 No.M17181 Year of construction1996 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume1.1 Ltr. Motor10 KW Specified Features - Sand mill MaterialStainless steel Attritorcheck Vertical sandmillcheckCoBall mill Capacity1,1 Ltr. Housing dimensions Dia 200x135 mm Inlet15 mm Outlet15 mm With jacketcheck Max. temperature80 °C Motor10 kW, 400 Volt, 1465 rpm, (EX) Rotor speed1296 rpm Without ballscheck With pumpcheck Motor0,37 kW, 380-420/218-242 Volt, 1430 rpm Information Mounted on framecheck With switchcheck With switchgearcheck( as is) Weight480 kg CEcheck Floorspace1,2x0,9 m Total height1,76 m ATEX compatiblecheckSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition ...
General SKU345X792 LocationBarneveld MakeFryma TypeVME-400 No.M11362 Year of construction1985 Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume480 Ltr. Motor6.8 KW Specified Features - Processing vessel MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Closed stirring vesselcheck Capacity480 l. Vessel sizesDia. 1000x900 mm Dished bottomcheck Flat top sidecheck With covercheck ManholeDia. 900 mm Top connectionscheck OutletDN25 + DN80 With jacketcheck volume 61 l. Max. temperature150°C With anchor stirrercheck With dissolver stirrercheck 6,8 kW, 380 volt, 1485 rpm, (Ex) Motor… kW, 380 volt With homogenisercheck Motor5,5 kW, 380 volt, 2910 rpm, (Ex) Information Mounted on legscheck in frame With switchcheck Weight1900 kg Floorspace1,35x2,00 m Total height ...
General SKU412T1302 LocationBarneveld MakeFryma Maschinen GmbH Rheinfelden TypeMSM-12 No.M13585 Year of construction1989 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume0.5 Ltr. Motor3 KW Specified Features - Sand mill MaterialStainless steel Attritorcheck Vertical sandmillCoBall mill (1x) Capacity± 0.5 Ltr. Housing dimensions Dia 140x90 mm Inlet20 mm Motor3 kW (Loger DNGW-100) With variable speed drivecheck Rotor speed1100-2648 rpm Capacity5-40 Ltr./h (depending on product) With pumpcheck (Loher LP-A) Motor0,25 kW Information Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck ( as is) Floorspace1,4x0,8 m Total height1,65 m Weight310 kgSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced ...
General SKU300P750 LocationBarneveld MakeFryma Maschinen AG (DE) TypeDelmix MZM-VK-7 No.L 14500 Year of construction1991 Main Features MaterialStainless steel Motor2.2 KW Inlet diameter90 mm Specified Features - Colloid mill MaterialStainless steel EmulsifierVacuum emulsifying system Vacuum (t)check Rotor sizesdia.120mm With hopper+/- 7 ltr Hopper jacketed(+ 1 bar) Inletdia.90mm Outletdia.60mm Motor2,2 KW, 220/380 Volt With gate type stirrercheck With scraperscheck Motor0,12 KW, 220/380 Volt With vacuum pumpEdwards RV12 Motorcheck Information Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,3x0,8 M Total height1,7 M Weight240 KGColloid millsFrymaMills > Colloid millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wor ...
