We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Pastries line Fritsch Euroline P 235 Basic model version I Bandwidth 615 mm with dough coil holder Cutting station with cutting rollers with roller tray Dough collecting container Wrapping roller easy Dough scraper with guillotine with cutting length adjustment Stainless steel version 6000 mm long Connection 400V, 16A-CEE plug Machine
used
Pastry cutting table Fritsch Euroline - with cutting rollers - with filling station filler - with guillotine - with folding shoes - with humidification station - System is mobile on wheels - Bandwidth
used
Fritsch pastry line Type: Euroline with calibration head with guillotine with croissant rollers 3 & 5 rows Donut / Panncake Roller with different cutting rollers with foot switch with scraper with treadmill Good condition many accessories Height max. 200cm Width: 800cm Depth: 100cm
used
FRITSCH Rollfix 70/650 EMA: * Tape dimensions: width 700 mm; * power: 400V x3/50Hz, 1.8kW; * used machine in working condition * year of issue 2011
used
Cutting table with cutting rollers Bandwidth 60 cm Dimensions: Height: 105 cm Width: 350 cm Depth: 65 cm
used
left with long band Machine mobile on wheels right band foldable with protective grille
used
Fritsch CTR incl. CRH and FRH wrapper as well as table extension for the production of Danish pastries. Incl. many punches, as well as decorative and cutting rollers. Technically completely overhauled incl. new control system! New tapes! Pneumatics completely overhauled! Viewing and test run possible at any time! Sold only to professionals. Only the written purchase contract is binding! The brands and characteristics mentioned here are only used to describe the product. If you have any questions, please feel free to call or send an email at any time! The machine can be supplied by our own fleet of vehicles (at a cost), or sent via freight forwarder! It is also possible to organise a commissioning with a master baker! In accordance with EU law, we would like to point out that we do not assume any guarantee, warranty, liability for material defects or the l ...
used
Fritsch Easyline used (this is the "little" sister of the Euroline) Total length 5.70 meters! New controls! Cutting roller frame Guillotine Ribbon in very good condition! Electronics checked and repaired. Machine runs very quietly! Device has been cleaned and tested! The device can be viewed and tested on site! Delivery by our own fleet of vehicles is possible (for a fee). Sold only to professionals! Only the written purchase contract is binding! If you have any questions, please feel free to write or call. No warranty, no warranty, or anything else. Exceptions to this are damages due to intent or gross negligence.
used
Pulverisette, Analysette, Laboret 03.502 Lab vibrators according to posted photos. With lid and straps, scope of delivery according to photos. Programs: -Inter -Perm -Micro Adjustable Bfukypvbsu
used
-with 2 flour spreaders -Total length 680cm -with rollers
used
Trapeze Punch / Croissant Fritsch Bakery Machines -Built in 2007 -Type trapezoid 270/50x90 6R
used
Fritsch Easyline combined with Fritsch CTR. The machine for croissants and Danish pastries! Total length 12 meters! Composed of: Calibration head KK Easyline (cutting frame and guillotine) CTR Punching-Turning System CRH wrapper (for unfilled croissants) FRH wrapper (for stuffed croissants) Incl. various décor and cutting knife. Incl. various punches Devices with NEW controls! Ribbons in good / mint condition! Machines very well maintained with few hours of operation! The device can be viewed and tested on site! Delivery by our own fleet of vehicles is possible (for a fee). Sold only to professionals! Only the written purchase contract is binding! If you have any questions, please feel free to write or call. No warranty, no warranty, or anything else. Exceptions to this are damages due to intent or gross negligence.
used
Dough block processing up to approx. 15 kg belt width 650 mm, the length of the desk 1,2 x 1,2 m Sheeting speed 40 m/min During cutting: 2 - 7 m/min Working width 650 mm Roller clearance 0.1 - 42 mm Cutting table length 1.4 / 1.625 m Sheeting table length 1.2 m 1,1 kW 400 V50 Hz 3 Ph used, in working condition
used
Croissant winder Fritsch BCW 1000 tableside machine used table croissant wrappers from Fritsch Model BCW 1000 also suitable for cutting tables immediately available for sale in the warehouse in Bielefeld. -380 volts
used
Fritsch FRH 400 / R - Wrapper for croissant with filling * power: 0,55 kW, 50Hz/ 1,5A; * the used machine works well
used
Connected load: 1.8kW.
used
Connected load: 3.7kW, with documentation, without grid conveyor, an inspection is possible.
used
Assembly room dimensions: 1020x770mm, table dimensions: 920x690mm, max. PCB dimensions: 690x760mm, connected load: 1500W, length: 2100m, width: 2100mm, weight: 900kg, with feeding of components from belt, bar, belt section, tray and bulk belt, suitable for chips 01005, fine pitch 80x80mm, pitch 0.3mm, BGAs, μBGAs, CSPs, QFNs, special components such as connectors and wired LEDs, an on-site inspection is possible.
used
Fritsch Winder Type: Rollex 380V 50Hz Height: 113cm Width: 55cm Depth: 50cm
used
Dough roll-out machine make; FRITSCH Model: Rollfix K 801 with cutting device Manual dough roll-out machine with hand and foot shift for all doughs for rolling out and touring Working width 630 mm Roller adjustment up to 30 mm New tapes and wiper knives with cutting station on the right Connection 400V, 16A-CEE plug ** Cutting shafts on request **
used
Dough Piece Deposition for existing lines: EASYLINE, EUROLINE, MULTICUT also suitable for make up lines from RONDO, RADEMAKER, CANOL, RHEON, etc. * Year of production: 2000 * Mains volltage: 3 x 230 / 400V+N+PE * Compr. air: 100 L/min, 5 bar * Operating site: in running direction to the right * Nominal width: 800 mm * Retracction length: up to 800 mm * Baking tray drawer suitable for pieces: 800 x 800 mm, 600 x 800 mm, 800 x 400 mm, 600 x 400 mm The deposition located in Germany
used
Sticks/Pastries/Rolls/Croissant Multi Punching System Year of construction 2004 composed of: Calibration head type 88/700 Punching robot CTR-700 Performance per hour - Punching/turning stroke 20 rpm - Cutting stroke 45/min various tools available: Filling device 6-row Winder CRH 400 for unfilled products Fritsch winder type FRH 400-L for filled products checked and cleaned, tapes renewed! The system is now available from stock in Rottenburg!
used
for wrapping unfilled croissants, Bamberger, Kornspitz, salt sticks, yeast chicken, baguette rolls. Suitable for FRITSCH lines: CTR system, MULTICUT as well as a single machine with manual feeding of dough pieces. For this, however, electrical connection should be adapted. Year of construction: 2003 (used in wine, in TOP condition) Mains voltage: 3 x 400 V / N+PE Frequency: 50 Hz Current: 2 A Power: 0.9 kW equipped with: - Stollen belt at the outlet table - Entry aid to the line Location: Southern Germany
used
Fritsch Filler for pastry lines (Euroline) Stainless steel 6 rows with air compressor connection
used
used roll-out machine Fritsch rollfix 60/650 E, overhauled, 2 x 1.20 m table length / area (total length: 1.40 m per table), machine no.: 02005/650069527132