used FPT area

Ref. -No.: 10347 Manufacturer: FPT Year of construction: 2006 Type of control: CNC Control: Heidenhain 530 Country of origin: Italien X-Travel: 12000 mm Y-Travel: 3500 mm Z-Travel: 1500 mm Tool Piece Magazine With: 80 Pcs./pcs. Spindle Speed: 3000 RPM Drive Capacity - Spindle Motor: 37 kW Round table 1 (lxw): 2500x2500 mm Round Table 1 - V: 2000 mm Rotary table 1 max. load: 30000 kg Round table 2 (lxw): 2500x2500 mm Round Table 2 - V: 1500 mm Rotary table 2 max. load: 30000 kg Further information:

Year of construction 2001 Hours of power up 16,400 hours Spindle rotation hours h 3,078 X axis - Longitudinal travel 7,000 mm Z axis - Vertical travel 2,500 mm Y axis - Transverse travel mm 1,250 (1050) Work progress speed mm/min 0 ÷ 4,000 Rapid feed speed mm/min 12,000 Maximum thrust on the X-Y-Z axes daN 2,200 Spindle motor power in S1 kW 30 Spindle motor power in S6 kW 37.5 Spindle speed at constant torque. rpm 0 ÷ 235 Spindle speed at constant power. rpm 235 ÷ 4,000 Maximum spindle torque in S6 Nm 1,500 Supply voltage Vac 400 Power frequency Hz 50 Total installed power kW 75.1 Spindle taper NOT INSTALLED Automatic head change Yes ISO 50 tool magazine no. pos. 60 Automatic tool changer installed HEIDENHAIN TNC430M CNC Positioning accuracy mm ±0.020 Repeatability accuracy mm ±0.010 Supplied accessories: - X axis bench with X axis telescopic cover - Up ...

Year of construction 2000 Hours of power up h 10205 X axis - Longitudinal travel 10,500 mm Z axis - Vertical travel 2,500 mm Y axis - Transversal travel 1,250 mm Work progress speed mm/min 0 ÷ 4,000 Rapid feed speed mm/min 12,000 Maximum thrust on the X-Y-Z axes daN 2,200 Spindle motor power in S1 kW 30 Spindle motor power in S6 kW 37.5 Spindle speed at constant torque. rpm 0 ÷ 235 Spindle speed at constant power. rpm 235 ÷ 4,000 Maximum spindle torque in S6 Nm 1,500 Supply voltage Vac 400 Power frequency Hz 50 Total installed power kW 75.1 ISO spindle taper ISO 50 Positioning accuracy mm ±0.020 Repeatability accuracy mm ±0.010 Supplied accessories: - X axis bench with X axis telescopic cover - Upright complete with ram - Z axis telescopic cover - Articulated presetting probe support - Pneumostatic support system - Carter - Hydraulic unit - Filtering tan ...

This FPT RONIN milling machine was built in the year 2012 in Italy. The machine has a longitudinal stroke (X) of 6000 mm, a vertical stroke (Z) of 2000 mm and a cross stroke (Y) of 1250 mm.

x-travel: 14.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: Heidenhain Itnc 530 total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1110049 Type of machine CNC floortype milling machine Make FPT Type Spirit 130 Build in 2012 Type of control HEIDENHAIN TNC Itnc 530 X-stroke (mm) 14.000 Y-stroke (mm) 1.500 Z-stroke (mm) 3.000 Speeds (Rpm) max. 4.000 Admission in spindlehead Iso 50 Rapid feeds max 25.000 mm/min Additional information Program run 9655 hour The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table length: 9000 mm Table width: 3000 mm Longitudinal X: 8000 mm Cross Y: 2500 mm Vertical Z: 1500 mm Positions ATC: 100   CNC Brand: Heidenhain CNC Model: HeidenHain iTNC530 ATC Chain 100 positions TUPCG5 Milling head 360.000 x 0.001 Gr Torq 1180 Nm Head changer with 3 positions Double HeidenHain iTNC 530 Index table 1200 mm  X-Axis:               8000mm Y-Axis:               2500mm Z-Axis:               1500mm Table Length:         9000mm Table Width:          3000mm Power on spindle:     46kW Spindle speeds:       5000Rpm Spindle Taper:        50 + HSK 63ISO/Bt/Mk Feed rate X-Axis:     35000mm/min. Feed rate Y-Axis:&n ...

Table length: 3500 mm Table width: 900 mm Longitudinal X: 3000 mm Cross Y: 1000 mm Vertical Z: 1500 mm Positions ATC: 0   CNC Brand: Heidenhain X-Axis:         3000mm Y-Axis:         1000mm Z-Axis:         1500mm Table Length:   3500mm Table Width:    900mm Table load:     5500 Power on spindle:24kW Spindle speeds: 2000Rpm Spindle Taper:  50ISO/Bt/Mk Feed rate X-Axis:10000mm/min. Feed rate Y-Axis:10000mm/min. Feed rate Z-Axis:10000mm/min. Length:         6500mm Width:          3500mm Height:         3500mm Weight:         18000kg

Key data: 2000 , 1000 , 1200

Used bed milling machine, Fab.Fpt, type LEM 934, built in 1996, Table 2500 x920 mm, longitudinal stroke 2000 mm, transverse stroke 1000 mm, vertical stroke 1200 mm, Control Heidenhain TNC 426. Machine has a defect in the Y-axis.

Technical data of the FPT Pragma M40 mobile column milling machine used: Longitudinal travel: 4000 mm Vertical travel: 1600 mm Transversal travel: 1200 mm Working feeds: 0-15000 mm/min Fast feed: 30000 mm/min Maximum thrust on axes (X,Y,Z): 2000 from N Spindle motor power (continuous service S1): 28 kW 38 hp Spindle motor power (intermittent service S6-60%): 35 kW 47,6 hp Constant torque spindle speed range: 0-312.5 g/min Spindle speed range at constant power. 312.5-5000 rpm Maximum spindle torque (continuous service S1): 856 Nm Maximum spindle torque (intermittent service S6-60%): 1070 Nm Supply voltage: 50Hz Current consumption: 119,2A Total installed power: 65 kW 88,4hp

BRAND: FPT YEAR: 2012 MODEL: RONIN APPLICATION TYPE: MILLING LOCATION: PORTUGAL MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY GINDUMAC ID: PT-MIL-FPT-2012-00001 MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - LONGITUDINAL STROKE (X) MM 6000 - VERTICAL STROKE (Z) MM 2000 - CROSS STROKE (Y) MM 1250 - MACHINING FEEDRATES MM/MIN 0-15000 - FAST FEEDS MM/MIN 35000 MAXIMUM STRENGTH ON THE AXES (X, Y, Z) OF THE N 2200 - SUPPLY VOLTAGE VAC 400 (-15%, +10%) - DIN VDE 0160 - POWER FREQUENCY 50 HZ - ABSORBED CURRENT A 137 - TOTAL INSTALLED POWER KW (HP) 81. 3 (110. 5)

Ref. -No.: 10350 Manufacturer: FPT Year of construction: 2012 Type of control: CNC Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Italien X-Travel: 14000 mm Y-Travel: 5000 mm Z-Travel: 1500 mm W-Axis: 1000 mm Numbers Of Tools In Magazin: 24 Drive Capacity - Spindle Motor: 60 kW Rotary table diameter: 3000x3000 mm Rotary table travel V: 2500 mm Rotary table max. Load: 80000 kg swivel angle: 180 ° Further information: +3D M Sensor +CNC controlled angle head: micro

CNC travelling column drilling-milling machine manufacturer FPT model Pragma M40 with control Fidia C20 with plate field 5000 x 2000 mm. Travel xyz 4000x2000x1200 mm. 2 pieces of universal heads BT50 / HSK63 both automatically swivel 2.5°. Machine immediately available and available. Dismantling and loading onto suitable trucks is cost-effective. Installation and commissioning on request.

- - - - - travels - - - - -: - - - - - - travel -x axis: 10.000 mm travel -y axis: 1.500 mm travel -z axis: 4.000 mm - - - spindle - - -: - - - - - - output: 62.5 kW turning speed range: 262 - 4.000 U/min Torque: 2.280 Nm - - - table - - -: - - - - - - Size of table plate: 2x (2.500 x 3.000) mm longitudinal travel: 2.000 mm max. load: 30.000 kg solution: 0,0005 ° solution: 1,8 sek. table turning speeds: 1,5 U/min - - - further technical details - - -: - - - control: Siemens 840 Dsl numbers of positions in the tool changer: 80 tool taper: ISO 50 max. feed: 25.000 mm/min - - - T-slots - - -: - - - - - - size of T-slots (DIN 650): 28 mm T-slot - distance: 225 mm Milling machine | SPIRIT 140 - 2014 equipped with two HYDROSTATIC rotary boring tables (TRT30). The machine has only approx. 9.900 H working hours. Equipment: - Hydrostatic guideways - Cooling system - Handwheel with radio transmi ...

CNC Boring and milling machine FPT SPAZIO 20 - 2000x800x1250 mm, CNC SELCA 3045PD, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2200X750 mm, Longitudinal travel x axis: 2000 mm, Cross travel y axis: 800 mm, Vertical travel z axis: 1250 mm, Working feed x-y-z axes: 0 - 15.000 mm/1, Rapid feed x-y-z axes: 15.000 mm/1, Spindle taper: 50 DIN 69871, Spindle speed: 0 - 4000 giri/1, Spindle motor power: 21 Kw(S1) - 25 Kw(S6), Cnc: SELCA 3045PD, Accessories: Automatic index head 2,5°, chip conveyor

Siemens 840D SL steering unit Year of construction 2008 Pallet dimensions 1200 x 1000 mm HEIDENHAIN iTNC 530 steering unit Maximum load allowed on the table 5000 kg Axis travel x mm 1750 Y-axis travel 1400 mm Z axis travel 600 mm Rapid feeds X -Y -Z m/min 35 HSK A63 spindle connection Spindle revolutions rpm 18,000 Spindle Motor Kw 18.5-25 Tool warehouse n. 30 random

Pallet dimensions 1200 x 1000 mm HEIDENHAIN iTNC 530 steering unit Maximum load allowed on the table 5000 kg Axis travel x mm 1750 Y-axis travel 1400 mm Z axis travel 600 mm Rapid feeds X -Y -Z m/min 35 HSK A63 spindle connection Spindle revolutions rpm 18,000 Spindle Motor Kw 18.5-25 Tool warehouse n 30 random

Key data: 3500 mm, 1100 mm, 1500 mm

FPT Industrie TESSEN EVO - Travelling column milling machine - Heidenhain TNC640 CNC control - portable electronic handwheel HR520 - Manual docking of the frog head to the machine - Universal head with 0.001° pitch - Static RTCP in the room - Tapping without compensating chuck for mechanical milling heads - Collision monitoring sensor - 2 tool magazines of 40 positions each ISO 50 - 2 posts for loading and unloading tools in the magazine - Wireless touch probe - Internal and external coolant supply (LEIU-LEU) - Internal compressed air supply - Pendulum machining with a partition wall - Full enclosure with roof - Workspace lighting - Bed flushing - Chip conveyor with ejection on the right side - Programmable adaptive control - Teleservice (remote diagnosis) - GREEN MODE function to optimize the energy consumption of the machine - FPT Standard Paint -Magnetic - NC ...

spindle diameter:160 mm x-travel:6000 mm y-travel:5000 mm z-axis:1500 mm dimension of the ram:470 x 500 mm w-axis:900 mm spindle taper ISO:50 spindle turning speed range:1 -3000 U/min spindle motor:71 kW feed speeds:1 - 5000 mm/min rapid speed:25 m/min total power requirement:187,6 kW dimensions of the machine ca.:14,1 x 13,4 x ü.F.7,8 m Machine in mint condition ! with CNC control HEIDENHAIN iTNC 530 autom. toolchanger 80 - pockets CNC Rotary Table 4000 x 4000 mm max. table load 75 to. longitudinal movement V-axis 1500 mm autom. head changer with universal Milling Head universal high speed milling head 5-axis 18000 rpm RENISHAW measuring probe belt filtering unit and through spindle coolant chip conveyor

Area: 0 m² Length:1.500 mm  Width:1.000 mm  Height:2.300 mm  Weight:4.500 kg 

MAYER large area saw Motor of the main saw unit 9 kW Max size of cut board 3200 x 2400 mm Cut materials: all types of difficult-to-machine plastics and all types of wood and chipboard. With heavy and solid saws, Mayer relies on consistently high quality and advanced machine design. The overall concept is also convincing: The heavy construction with pressure rails and the steel material shifter, the simple operation in one-handed operation guarantee high performance and accuracy in a rational blank of board material. The saw carriage with the main and pre-cutting unit with a cutting height of up to 100 mm moves on a hardened and ground system guided along circular profiles. The automatic adjustment of the cutting height guarantees the optimal cutting angle of the blade into the material. The pressure beam opens depending on the height of the material, which reduces the time requi ...

Pressureless dust filters for mounting on silos, material bunkers, etc. in standard steel version. Equipped with 20 pcs. fabric filter hoses (200 mm x 2,000 mm long each), incl. electric vibro cleaning. Filter area: Approx. 25 m2. In very good condition, several filters available (same construction).

Plate press - table press - Laboratory Press - Universal Press MHSP522 Press area 230 * 230 mm Clear width 200 mm Manual drive with worm gear screw jacks 5 KN Pressure 5 KN (0.5 tons) Weight 55 kg Per sensor revolution 0.5 mm path, this little manual force with great force, very fine deliverable. Pressing force is long maintained by self-locking.

Sale of parts and assemblies ex large area mower Shibaura CM 364: Diesel engine 25 kw / hydrostatic transmission / axles / electric / cabin / wheels and more. no mower-deck.

Grass collecting container GAH 3060/2 fits Kubota front mower F3060 / F3560. Without turbine!

Reiser / parkland SCH 212/5 GM 150 Mowing/mulching and simultaneous collecting of grass, leaves, scrub, horse droppings, etc. Heavy, sturdy design: combination of truck chassis and superior flail, working width 1500 mm, container volume 5 m³, hydr. high dump (2,200 mm) as well as soil drainage through rear tailgate. Special features: 3 x adjusting possible hose rupture backups in the telescopic cylinders 11-speed adjustable cutting height 0-125 mm incl. ABE (General permission of operation) More mowing container stock!