We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
This FANUC Robocut ALPHA-0B Erosion machine was manufactured in the year 1995. It is equipped with a Fanuc Series 16-W control unit and has 4 axis. The machine has a wire tension: 0-2500 g.
used
Key data: 370 mm, 270 mm, 254 mm
Machine Details Stock-No. 1105-03942 Type of machine Wire Eroding Machine Make FANUC Type Robocut Alpha oid Year of manufacture 2008 Type of control CNC Storage location FRANCE Country of origin JAPAN Delivery time to be agreed Freight basis ex site Price Technical details table length 700 mm table width 400 mm Control Fanuc 310 S WA X-Axis 520 mm y-axis 370 mm U-axis +/- 60 mm V-axis +/- 60 mm Conical angle (100mm) +/- 30° Z-Axis 410 mm max. workpiece sizes 600 x 420 mm max. workpiece height 400 mm max. workpiece weight 400 kg Rapid traverse 0.9 m/min interval size of the actuator 0,001 mm wire dia. 0.1 - 0.30 mm wire speed 0 - 15 m/min wire clamping 200 - 2.500 g total power requirement ~ 14 kVA weight of the machine approx. 2.5 t dimensions of the machine approx. 3.2 x 2.5 x 2.1 m Accessories Documents electr. Hand Wheel
used
Submerged Wire FANUC ROBOCUT Alpha 1-ib with auto wire thread, Information about technical data are not binding., Machine available subject to prior sale., X-y-z axes travel: 550x370x310 mm, U-v axes travel: 120x120 mm, Taper angle: ± 30°, Automatic wire threading and rethreading: yes, Maximum workpiece dimension: 1000x800x300 mm, Cnc: FANUC 180is - WB, Filter type: Cartridge, Weight: 3.000 Kg, Accessories: Chiller unit
used
This FANUC Robocut Alpha 0iE CNC Wire Cut EDM Machine was manufactured in 2013 and is equipped with a FANUC 31i-WA control. It has 5 axes (X-axis: 370 mm / Y-axis: 270 mm / Z-axis: 255 mm / U-axis: 60 mm / V-axis: 60 mm) and can operate with a maximum workpiece weight of 500 kg. In total it has operated 17,500 hours from which 4,850 are cutting hours.
used
This FANUC Robocut α-1iA erosion machine was made in the year 2000 in Japan. It is equipped with a Fanuc Series 18i-W control unit. The machine has a max work table load of 1000 kg.
used
Fanuc Robocut alpha-C600ib EDM Wire Cutting Machine Machine is in very good condition Maximum workpiece dimensions [mm]: 1050 Ã 820 Ã 300 Maximum workpiece weight [kg] : 1000
used
Control Fanuc Travels X / Y / Z: 520 x 370 x 410 mm Travels U / V: 120 x 120 mm cooling unit
used
Key data: 320 mm, 220 mm, 180 mm
Inv. Num. : 6869 Type: Robocut 0iA Producer: FANUC Created: 2000 Parameters: Control system: FANUC Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 180 mm Feed length in the U-axis ( -): 120 mm Feed length in the V-axis ( -): 120 mm Machine weight: 1200 kg
used
BRAND: FANUC YEAR: 2021 MODEL: ROBOCUT C400IC PRODUCTION HOURS: 20 APPLICATION TYPE: EDM LOCATION: SLOVENIA MACHINE TYPE: EROSION MACHINE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 2200 KG CONTROL UNIT BRAND: FANUC MOVEMENT X-AXIS MOVEMENT: 400 MM Y-AXIS MOVEMENT: 300 MM Z-AXIS MOVEMENT: 255 MM U/V MOVEMENT: 120 MM WORKPIECE WORKPIECE WEIGHT: 500 KG Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MEASURING BARS - AUTOMATIC FRONT DOORS
used
BRAND: FANUC YEAR: 1995 MODEL: ROBOCUT ALPHA- 0B APPLICATION TYPE: EDM LOCATION: SLOVENIA MACHINE TYPE: EROSION MACHINE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: FANUC MODEL: SERIES 16-W MAIN DRIVE NUMBER OF AXIS: 4 MOVEMENT X-AXIS MOVEMENT: 160 MM Z-AXIS MOVEMENT: 150 MM U/V MOVEMENT: 30 MM WORKPIECE WORKPIECE DRM OVER BED: 650 MM WORKPIECE DRM OVER SUPPORT: 420 MM WORKPIECE DRM: 150 MM WORKPIECE WEIGHT: 250 KG TABLE OUTER LENGTH: 300 MM OUTER WIDTH: 200 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - WIRE TENSION: 0-2500 G - WIRE FEEDRATE: 1-10 M/MIN
used
Technical details: X-axis travel 400 mm Travel Y-axis 300 mm Z-axis travel 255 mm U/V axes ± 60 mm Max. workpiece weight 500 kg Standard wire 0.25 mm 5-axis controlled Universal clamping table 16 kg wire spool system wire guide 0.1 to 0.3 mm Accessories: - Generator a-i2300 - Start hole search function - Thermo compesation -and so on.
used
X axis: 550 mm Y axis: 370 mm U axis: 120 mm V axis: 120 mm Z axis: 310 mm Fast forward (X, Y, Z / U, V): 900 mm / min / 450 mm / min Max work piece weight: 1000 kgs Power: 13 KVA Year 2002 Equipped with: Control: FANUC 180 iS-W Refrigerator: Yes
used
table length: - mm table width: - mm ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 370 mm, 270 mm, 255 mm
Inv. Num. : 7378 Type: ROBOCUT Alpha-0iE Producer: FANUC Created: 2013, GO 2020 Parameters: Control system: FANUC Max. travel length of the X-axis: 370 mm Max. travel length of the Y-axis: 270 mm Max. travel length of the Z-axis: 255 mm Feed length in the U-axis ( -): 60 mm Feed length in the V-axis ( -): 60 mm Minimum wire gauge: 0.1 mm Maximum wire thickness: 0.3 mm Max. workpiece dimensions: 700 x 600 x 250 mm Max. workpiece weight: 500 kg Machine height: 1950 mm Machine length: 2200 mm Machine width: 1930 mm Machine weight: 1200 kg Equipment: Measuring instruments Software
used
Description: Control: CNC FANUC 16W Automatic threading Maximum workpiece dimensions: 650 x 420 mm Maximum workpiece thickness: 160 mm Max. workpiece weight: 350 kg Stroke (X-,Y-,Z-axis): 320 x 220 x 180 mm Table displacement speed: 900 mm/min Wire unwinding speed: 0 - 10 m/min Wire tension: 80 to 2500 gr Wire guide: Ø 0.25 mm Container capacity: 260 l Accessories: Cooling unit Lubrication tank with pump Documentation weight approx.: 1,900 kg, Approx. Onsite Dimension. (l x w x h): 3,200 x 2,200 x 2,000 mm
used
CNC Wire EDM Machine FANUC MATRA ROBOCUT a-1iA5 Year of construction 2001 Travel: X-axis 520 mm Y-axis 370 mm U-axis 120 mm V-axis 120 mm Z-axis 310 mm Max. workpiece dimensions: 790 x 730 x 300 mm Max. workpiece weight 1,000 kg Wire diameter 0.1 to 0.3 mm Wire feed speed 250 to 2500 g Max. taper angle +/- 30°/ 80 mm Control: FANUC Series 16i-W Machine weight: approx. 2,600 kg
used
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Fanuc LR Mate 100i robot with controller and handheld It is a five-axis, modular, electrically servo-driven robot designed for loading and unloading precision machines, welding and material transport. Its hollow joint construction encloses the entire cable routing to avoid getting stuck. The FANUC LR Mate 100i also features brushless AC servo motors that minimize motor maintenance, sealed bearings and drives enable operation in harsh factory environments. Included in delivery are the control unit Mate RJ-2 and handheld A05B-2301-C335 Since the article is available several times, the year of construction may differ. Robot Specifications Axes: 5 Payload: 3kg H-range: 620 mm Repeatability: ±0.04 mm Robot mass: 32kg Structure: Articulates Assembly: Floor, inverted Movement speed of the robot J1 180 °/s (3.14 rad/s) J2 180 °/s (3.14 rad/s) J3 225 °/s (3.93 ...
used
Spare parts from a Fraesmaschine Webo Roeperwerk type Gradumat Table size approx. 1250*1000mm, complete control Fanuc Y.O.M. 1987 such as board control panel, glass mass staebe, servoverstaerker, motors, ball roller spindles, feed motors, uvw. Price on request No more vertical head. Special price
used
We provide the following to the purchase : manufacturer Fanuc suitable for model series P-200 Shipping costs on demand with us:; Second Hand
used
Fanuc LR Mate 100i robot with controller and handheld It is a five-axis, modular, electrically servo-driven robot designed for loading and unloading precision machines, welding and material transport. Its hollow joint construction encloses the entire cable routing to avoid getting stuck. The FANUC LR Mate 100i also features brushless AC servo motors that minimize motor maintenance, sealed bearings and drives enable operation in harsh factory environments. Included in delivery are the control unit Mate RJ-2 and handheld A05B-2301-C335 Robot Specifications Axles: 5 Payload: 3kg H-reach: 620 mm Repeatability: ±0.04 mm Robot mass:32kg Movement speed of the robot J1 180 °/s (3.14 rad/s) J2 180 °/s (3.14 rad/s) J3 225 °/s (3.93 rad/s) J4 216 °/s (3.77 rad/s) J5272 °/s (4.75 rad/s) Robot Motion Range Robot J1 ±160° J2 +150° - 35° J3 +206° - 159° J4 ±120 ...
used
1 x Fanuc Back Plane 3 Slot A05B-2316-C105 1 x Fanuc A16B-3200-0042/05B900514 Board 1 x Fanuc A16B-1 212-0871/17C906140 Power Supply Board Alternative search terms A05B2316C105 A16B3200004205B900514 A16B1212087117C906140 A16B-3200-0042 A16B-1212-0871 A16B12120871.br/> .br>.br/>>A16B32000042.br/>.br/>.br/>.br/>.br/>.br/>.br/>.br/>.br/>
used
Capacitive: 60 kg 6 axes simultaneously controlled by Fanuc Teach-In System ; Very good
used
Capacity : 60 kgs. 6-axis simultaneously controlled by Fanuc Teach-In System ; Very good
used
Two little used Fanuc robots with tools and R-J2 controller. Working condition disabled from use. We can check hour counters. For example spareparts or use.