zubeh used for sale

for the production of products cast in moulds, such as chocolate bars, bars, etc. Accessories unit for SELMI Temper TOP EX only 1 year in production

-with 2 flour spreaders -Total length 680cm -with rollers

Containers mit Zubehör für MWM Typ TCG 2020 V12 (bis 1,2Mwe) Es gibt eine vollständige Dokumentation. 2012 Jahr. Nach dem Entfernen des 2020V12-Motors. Es gibt einen Schornstein für das Set. Es gibt keinen Abwärmetauscher, externen Kühler, zwei Module in der Steuerung.

bore: 22 mm weight: 214 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Viele MK Aufnahmen taper MK: 40 taper MK: 50 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 6 diameter: 160 mm turning length: ? mm total power requirement: 0 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,20,81 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mm weight: 24 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mm weight: 41 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,6 t : -- mm : -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N S ...

condition: gut sold only together as package: ja Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various accessories for a Bridgeport milling machine according to photo 3 jaws Chucks, face plates, milling cutters, collets and much more.

bore: 16 mm weight: 109 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 124 bore: 28 mm weight: 326 kg 4-283500 consisting of: - 14x Professional screw clamp - nitrided - - 10x Professional screw clamp 45°/90° - nitrided - 8x Prism Ø 50 135° with screwed-in collar - nitrided - 36x Quick-clamping bolts without groove, double - burnished - 8x magnetic clamping bolts 68 - aluminum - 12x universal stop 150 L - nitrided - 12x universal stop 225 L - nitrided - 4x universal stop 500 S - nitrided - 12x stop and clamping bracket 175 L - nitrided - 2x stop and clamping bracket 300 G - nitrided - 2x stop and clamping bracket 500 G - nitrided - 1x stop and clamping bracket 500 G with rotation angle left - nitrided & stop and clamping bracket and clamping bracket 500 G with rotation angle right - nitrided - 1x stop and clamping bracket 750 G left - nitrided & stop and clamping bracket Clamping bracket 750 G right - nitrided - 1x stop and clamping bracket 800  ...

number: 32 bore: 28 mm weight: 51,2 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mm weight: 86 kg 4-163400 Consisting of: - 10x Professional screw clamp, burnished/nitrided - 4x Professional screw clamp 45°/90°, burnished - 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided - 30x quick-release bolts without groove, double burnished - 8x universal stop 80 L, nitrided - 10x universal stop 115 L, nitrided - 10x stop and clamping angle 90 X, nitrided - 10x stop and clamping angle 90 L, nitrided - 4x stop and clamping angle 300 G, nitrided - 1x set of stop and clamping angles 250 G with rotating angle, nitrided - 1x set of stop and clamping angles 500 GK, nitrided - 1x tool trolley, powder-coated - 1x accessory set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mm weight: 13 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 22 mm weight: 92 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dividing head, dividing head, gearwheel, gears, lathe -Gears: 8 pieces -Shaft mount: Ø 28 mm -Teeth: 57/78/87/99/104/114/126/130 -Dimensions: see photo parts list -Dimension total. Ø 198 x 143 mm -Weight: 18.9 kg

number: 1 weight: 2,57 kg width: 265 mm height: 250 mm clamping force max.: 3 kN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

Accessory trolley for welding table, 3D welding and assembly tables -with: shelves for the accessories -Number: 1x tables available -Price: per piece -Dimensions: 1060/650/H1260 mm -Weight: 52 kg

An Alpma soft cheese production plant for Camenbert, Bri and feta cheese For milk processing of 10,000 l per hour, the following are available: Moulds Battery for round and square soft cheese moulds 4 Cheese Trays Stacking Turning Machines Transport equipment for tray stacks Dry salt plant Block moulds, washing system and stacker and destacker for the block moulds over 15,ooo pieces of trays for round and square soft cheeses Open washing trays for trays and equipment of a soft cheese dairy If there are no cheese vats, then you can use the open, approx. 15 m long cheese tub with a continuous curd production (coagulator tub). with S 5 control and the coagulator strap will probably have to be replaced.

1 semi-hard cheese dairy plant for non-pressed semi-hard cheese such as Tilsiter cheese Moulds and drain tables for approx. 55,000 l of cheese dairy milk per shift are available with 1 cheese curd - whey rotary drum de-whey with 10 curd melting vats, space for a total of 10 cheese curds. 1,150 Performa cheese bread molds

Accessories for Boku P 75 1 x Tank Car 1 x stainless steel kettle 75 L 1 x Whisk 1 x Flat Beater Used goods

Already working with the Doka Edge Protection System XP? Then this accessory package is your next logical move.  With original Doka railing clamps and XP posts, you’ll expand your system exactly where it matters †whether it’s for additional sections, larger areas, or extra safety along the edges.  🔧 100% original Doka XP parts  📦 Ready for immediate delivery †incl. reusable packaging  💶 Full package for just €5,135.†(net)  This package is ideal for anyone looking to extend their existing XP setup quickly and efficiently †no extra planning needed. Everything fits. Everything works. Just like youre used to.    Expand now †before you hit the limit.  The accessories are ready †you just have to grab them. 😉  👉 Ask. Decide. Go.  Price: from € 4259,00 ...

This PERI SKYDECK accessory package includes the system-relevant components required for operating the SKYDECK slab formwork system. Whether Drophead SFK , End Support SSL , Combikopf SCK , Prop Head SSK or cover strips †the accessories ensure safe load transfer , clean edge finishes and smooth workflows during forming and striking . Combined with panels and beams, they form a fully functional SKYDECK system ready for flexible use on site. The package is ideal for supplementing existing stock , project-specific configurations or as a required basis when assembling SKYDECK element packages.   💡 Important note: This accessory package is a prerequisite for the supply of SKYDECK panels from our offers and should be considered during planning.   👉 Perfectly matched to our PERI SKYDECK packages in 3-star, 1-star and 0-star quality. Price: fro ...

Upgrade instead of replacing: Doka Framax Xlife elements and accessories from rental stock in Denmark †perfect for expanding your inventory or getting started with Framax formwork! 💥 Whether you want to extend your existing Framax setup , fill specific gaps, or build your own system step by step †this click & mix offer gives you full flexibility. 🏗️ 🔹 Ideal for expanding your formwork inventory 🔹 Fully compatible with the Doka Framax Xlife system 🔹 Used, checked, and ready for immediate use 🔹 Original Doka quality †durable & cost-efficient 💡 Click & Mix: Choose exactly what you need †flexible and tailored to your project ! ⚠ Important: Required packaging will be charged additionally per piece . 🔥 Whether you’re a Framax pro or just getting started  ...

Top opportunity for professionals! 🔥 Available now: a comprehensive Hünnebeck Manto formwork package with approx. 210 m² of wall formwork , including matching accessories †ideal for efficient wall forming on site. The package includes a wide mix of Manto panels (various sizes) as well as essential accessories such as alignment clamps, corner clamps, wedge clamps, push-pull props and transport hooks †everything you need for a smooth and fast setup. 💪 👉 Mixed quality, but predominantly 0-star †perfect for cost-conscious contractors focusing on functionality and strong value for money. ✅ All benefits at a glance: Approx. 210 m² Hünnebeck Manto formwork Wide range of panels & accessories Ready for immediate use Ideal for medium to large construction projects Attractive pricing due to mixed  ...

: Italien Eurostamp Tooling is quality, competence and precision. Since 1970, we have been producing exceptionally precise tools and offering extremely high-quality solutions for all those customers who constantly require the highest level of performance and reliability. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.