zse used for sale

Compounding extruder Material: PE, PP, PS, ABS + fillers / Details: dcising, segmented screws and cylinders, degassing, vacuum pump, screw speed max. 300 rpm, DC motor 252 kW, heating power 98 kW, incl. side-feeding Leistritz LSB 90 (screws 2x x 90 mm, drive: 3.0 kW, screw speed: max. 150 rpm), Macromate SPS visualization. (attached photos are BEISPIELBILDER)

Material: PE, PP, PS, ABS / Details: three-phase motor, DC, segmented screws and cylinders, degassing, vacuum pump, screw speed: max. 600 rpm, control: Resotec PLC

Compounding system with GALA underwater granulation Material: PE, PP, PS, ABS // Details: segmented screws and cylinders, screw diameter 2x 40 mm, L/D 44, DC rotor, DC motor 104 kW with gearbox, worm speed: max. 1,200 rpm, 2-fold degassing, ground pressure transducer, start-up valve, water box, Gala A1PAC6 underwater granulation with water circulation system and centrifugal dryer, temperature control unit SINGLE STW 150/1-6-100-NS/E, 6-fachimetric dosing incl. control. Control: Macromatex. Power: approx. 200 - 400 KG/hr

Electric motor, three-phase motor -Manufacturer: ZSE MEZ, electric motor type 3APJC80-2 -Power: 0.55 kW -Speed: 2890 rpm -Shaft: Ø 19 x 40 mm -Voltage: 220V -Design: B3 -Protection class: IP 44 -Dimensions: 310/165/H195mm -Weight: 12kg

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Screw Ø: 2x 67 mm L/D: 34:1 Motor: 97.5 kW (DC)

Screw Diameter: 27 mm // Throughput: 100 kg/h

Electric motor, three-phase motor -Manufacturer: ZSE MEZ, electric motor type 4AP90s-4 -Power: 1.1kW -Speed: 1410 rpm -Shaft: Ø 24 x 50 mm -Protection class: IP 44 -Dimensions: 290/175/H210 mm -Weight: 12.3 kg

max. wheel diameter:150 mm gear width: mm max. module:3,5 min. module:1,25 total power requirement: kW weight of the machine ca.:6,5 t dimensions of the machine ca.:2,35 x 2,10 x 2,35 m Width of teeth:45 mm boring diameter:100 mm surface area:1300 x 300 mm

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Siemens Simatic OP17 controller Screw Ø: 2x 75 mm L/D: 36:1 Motor: 143 kW (DC)

General SKU359W975 MakeLeistritz TypeZSE 27HP-PH-40D Mach.No.3899 Year of construction2010 Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water cooling9x DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm Feeding with metering screwK-tron Exchangeable segmentscheck Number of temperature controllers:1 Used oncarrier material Capacitymax 200 kg/h MaterialStainless steel, Stainless steel 2.4819 (Hastelloy C-276) General LocationBarneveld With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg CEcheck Extra information Extra Specifications- This extruder has been used for testing carrier material. No API was produced/ ...

Key data: 130 mm, 35 , 600 U/min

Material: PE, PP, PS, ABS Details: DC motor, segmented screws and barrels, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors. Control cabinet for heating and motor control (NEW. Siemens S7) Screw Ø: 2x 130 mm L/D: 35:1 Motor: 500 kW (DC) Optional: side feeding, screen changer, GALA underwater pelletizing

General SKU359W976 MakeLeistritz TypeZSE 27HP-PH-40D Mach.No.3778 Year of construction2008 Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm MaterialStainless steel 2.4819 (Hastelloy C-276) General LocationBarneveld With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg CEcheck Extra information Extra Specificationsthis unit comes with: -2x k-tron feeders. - control cabinet. - 3x temperature control units. - extruder barrel lift - spare parts AgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedPowdered foodsDouble screw extrudersLeistritzIndustries > Chemical > A ...

Key data: 17 mm, 40 , 1200 U/min

Kategorie / Category: Twin-screw extruder / Twin-screw extruder Nummer / Number: DE27684 Manufacturer / Manufacturer: Leistritz Typ / Type: ZSE 18 HPe Baujahr / Year: 2009 Capacity: approx. 40 - 60 kg/h Motor: 9.4 kW AC max. screw speed: 1,200 rpm Screw diameter: 2 x Ø 18.8 mm L/D: 40:1 Material: PE, PP, PS, ABS + fillers // more details: synchronous, atmospheric degassing, segmented screws and barrels // Control: MacromateXX Siemens with visualization //

General SKU359W974 MakeLeistritz TypeZSE 18PH-40D GMP-Design Mach.No.03396 Year of construction2005 Sizes Screw diameter18 mm Main Features Motor4.7 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter18 L/D40 Co-rotatingcheck Number of heating zones:8 Electric heating1,0kW (8x) Water coolingcheck AC-motor4,7 kW, 400/230 volt With variable speed drivefrequency converter Screw speed30-600 rpm Feeding with metering screwcheck Exchangeable segmentscheck Number of temperature controllers:7 MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld With switchgearcheck Floorspace2,29 x 0,70 m Total height1,27 m CEcheck Extra information Extra Specifications- This extruder has been used for testing carrier material. No API was produced/ used in this extruder The scope consists of: Leistritz ZSE 18 PH-40D in GMP d ...

General SKU359W977 MakeLeistritz TypeZSE 27 HP-PH-40D Mach.No.3659 Year of construction2007 Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm MaterialStainless steel 2.4819 (Hastelloy C-276) General LocationBarneveld With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg CEcheck Extra information Extra Specificationsthis unit comes with: - control cabinet. - 3x temperature control units. - extruder barrel lift AgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedPowdered foodsDouble screw extrudersLeistritzIndustries > Chemical > AgrochemicalsIndustries > Chemical ...

This LEISTRITZ ZSE60MAXX-48D was manufactured in 2012. A co-rotating twin-screw extruder, its designed for high-performance compounding of advanced polymer materials, including biodegradable polymers. Adaptable to various extrusion processes, its ideal for bioplastics, masterbatch production, or specialty compounding. Contact us for more information about this machine.

General SKU011C013 LocationBarneveld MakeLeistritz Sizes Screw diameter110 mm Main Features Motor110 KW Inlet diameter110 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter110 mm L/D20 Counter rotatingcheck Number of heating zones:4 Electric heatingcheck DC-motor10-110 kW, 400 V MaterialStainless steel General TypeZSE-110 Mach.No.86.02.1822 Year of construction1986 With switchgear(as is) Sizes switchgear120 x 70 x 230 cm Floorspace4,70 x 1,40 m Total height2,20 mAgrochemicalsPlastic & polymersDiscountCosmeticsAnimal feedOther feedPowdered foodsDouble screw extrudersLeistritzIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersDiscountIndustries > Chemical > CosmeticsIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Other feedIndustries > Food & Feed > Powdered foodsExtruders > D ...

max. wheel diameter:150 mm gear width: mm max. module:3,5 min. module:1,25 total power requirement: kW weight of the machine ca.:6,5 t dimensions of the machine ca.:2,35 x 2,10 x 2,35 m Width of teeth:45 mm boring diameter:100 mm surface area:1300 x 300 mm

Key data: 3000 mm, 10 mm, 1000 mm

It is a guillotine shears from the Lotze company from 1972 with the machine number 2003016. In 12/22 and 01/23 the machine was serviced and the knives were resharpened. The machine was rarely used after that. The indicated price is ex works 26316 Varel without loading. The machine can be viewed at the site under power.

Key data: 27 mm, 36 , 1200 U/min

Warehouse – No. 2875 1 used, in 2026 Partially overhauled and function-tested compounding granulation line, consisting of: Brabender grav. Dosage 2-components (expandable, optional vs. surcharge) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 control stand-alone Extruder Twin Screw Leistritz Type ZSE 27 HP Synchronous, seal-combing, segmental screw and barrel with intensive cooling. Screws 2x Ø 27 mm- 36 L/D with 8 cylinder zones with 3x degassing zones, 1x vacuum pump 1.5 kW Screw speed up to 1,200 rpm.-1 – adjustable Extruder drive 33.8 kW - Heating capacity 9.8 kW installed Mass pressure sensor Control Macromatex III MAAG Gala Underwater Pelletizer Type LPU Model SLC 5, incl. Polymer start-up valve with hydraulics Perforated plate 20°, granulator SLC 5 with drive 1.5 kW Water Box - Temperate water system with Granule Centrifugal Dryer Type 1150, Driv ...

Key data: 27 mm, 36 , 1200 U/min

Warehouse – No. 2875 1 used, in 2026 Partially overhauled and function-tested compounding granulation line, consisting of: Brabender grav. Dosage 2-components (expandable, optional vs. surcharge) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 control stand-alone Extruder Twin Screw Leistritz Type ZSE 27 HP Synchronous, seal-combing, segmental screw and barrel with intensive cooling. Screws 2x Ø 27 mm- 36 L/D with 8 cylinder zones with 3x degassing zones, 1x vacuum pump 1.5 kW Screw speed up to 1,200 rpm.-1 – adjustable Extruder drive 33.8 kW - Heating capacity 9.8 kW installed Mass pressure sensor Control Macromatex III MAAG Gala Underwater Pelletizer Type LPU Model SLC 5, incl. Polymer start-up valve with hydraulics Perforated plate 20°, granulator SLC 5 with drive 1.5 kW Water Box - Temperate water system with Granule Centrifugal Dryer Type 1150, Driv ...