zf gear used for sale

Boiling kettle ZFM Type: KP-500 Capacity: 500L Heating energy: Natural gas Device dimensions: 1450 x 1250 x 1200 mm Chamber dimensions: 850 x 1000 x 620 mm Electric power supply: 230V Year of production: 2017 Built of stainless steel Items in magazine: 1 Conditon: Used Price on request, We have many other equipment : Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman

Time relay PILZ ZFS/10s/110V~/1Uz 651175 0 - 10 sec 110 V AC 2 VA 40 - 60 Hz 250 V AC 5 A 750 VA used ! Dimensions: 105 x 85 x 23 mm

Bevel helical gearboxes Manufacturer : Bonfiglioli Model : A 504 UH50 P90 LOE engine: Euromotori 1,1kw MS9016Year of construction 2008 NEW, unused from old stock for more information see pictures.

Technical data Max. diam. of external gear: 600 mm Module max.: 20 mm Module min.: 0.5 mm Table load max.: 250 kg Distance between centres (min.): 25 mm Distance between centres (max.): 500 mm Error increase: 1:: 250 1:: 500 1:: 1000 Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1000 mm Width: 1000 mm Height: 2200 mm

Description: Change Gears/Gears: This 32-piece steel change gear set consists of: Gears with the number of teeth from 20s - 149s Approx. Onsite Dimension. (l x w x h): 400 x 250 x 200 mm, weight approx.: 50 kg

RECON Part number: 1230 2144 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Unused gearboxes, angular gearboxes, partly without electric motors, partly with electric motors. Manufacturers e.g. PWH Plants + Systems GmbH These types and others pre-raetig: 1. PWH 90KW Type K2SZG250 n1=1500 rpm n2= 75 rpm i=20 P=90 KW Length over everything: 120cm Width over all approx. 55cm Height approx. 56cm Diameter of shaft rear (lies laengs) 45mm Transducer of the shaft front (lies transverse) outside 160mm Transducer of the shaft front (lies transversely) inside 140mm Weight-cooked 1,000kg 2. PWH 45KW Type KSZG200 n1=1470 rpm n2= 73.5 rpm i=20 P=45 KW All over: 94cm Pq7hwm Width over all approx. 45cm Height approx. 46cm Diameter of shaft rear (lies laengs) 50mm Transducer of the shaft front (lies transverse) outside 150mm Transducer of the shaft front (lies transverse) inside 120mm, passage 100mm Weight-cooked 600kg 3. PWH 37KW Type KSZG180 ...

Machine : Gear hobs 1 set of gear hobs 20 pcs. Angle of engagement 20 degrees Module : Set all sizes M 1 2x M 3 M 1.25 M 3.25 M 1.5 2 x M 3.5 M 1.75 m 3.75 M 2 M 4 M 2.25 m 4.5 M 2.5 M 5 M 2.75 m 5.5 M 6 Gear hobs : M 1 , 20 degrees , φ 70x50, 80% M 1.5 20 degrees, φ 54x56, 90%, M 2 20degrees, φ 72x72 90% M 2.5 20 degrees, φ 60x65, 80% M 4 20 degrees, φ 90x78, 80% M 2.5 20 degrees φ 78x190, 30% M 1.6 30°, φ 85x130, 90% M 1,5875, 30, φ 82x120, 90%

- Toothed gear MWM 12302297 Original - Suitable for several motors - Please note! Price per piece! - 12302297 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrat ...

- Toothed gear MWM 12307524 - Please note! Price per piece! - 12307524 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes into  ...

max. wheel diameter: 400 mm gear width: 0 mm module: pinion diameter - max.: 254 mm axial cross angle: 90 ° total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m This machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and the pinion spindle is horizontal. The pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting position whereby the gear is loaded with a preset torque. The axial pinion position can be adjusted until the quietest meshing position of the traction flank is found. Likewise, the thrust flank can be tested during the return run. Marking compound is sprayed on both sides of the teeth so the flank contact pattern can be seen. Working cycles, as well as the positioning in the tooth gap, are automat ...

Gear, angular gear, Stinrad gear, angular gear, transmission gear, worm gear, angular gear for edge banding -Manufacturer: ZAE, angular gear with cardan joint from the BRANDT KS 25 edge banding machine -Type: W 88 -Translation: i = 2: 1 -Dimensions: 260/100 / H210 mm -Weight: 7.2 kg

Gear motor, electric motor, electric gear motor, stainless steel motor, stainless steel gear motor, stainless steel bevel gear motor -Gear motor: stainless steel gear motor -Gear: SEW-Eurodrive type KEST37T TENV80-4B -Speed: 1455/33 rpm i= 44.46 -Engine: Marlin Premium Stainless type TENV 80-4B -Power: 0.75 kW -Hollow shaft: Ø 34 x 120 mm -Protection rating: IP65 -Dimensions: 530/180/H220 mm -Weight: 35kg

max. wheel diameter: 400 mm gear width: 75 mm max. module: 0,5 min. module: 60 total power requirement: 25 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 ______________________________________________________________________ ___________ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12 ...

Gear motor, electric motor, electric gear motor, variable speed gear motor, variable speed gear motor -Manufacturer: Lenze, geared motor -Variable gear: Simplabelt type 11.342.18.10.2 188-89 rpm -Gearbox: Type 12.602.10.1.3D -Engine: VEM type KMER 80 G 4 -Power: 0.75 kW / 1380 rpm -Protection class: IP54 -Shaft: Ø 25 x 50 mm -Construction: B3 -Number: 2x gear motor available -Price per piece -Dimensions: 550/190/H360 mm -Weight: 27 kg

Gear, gears, spur gear, spur gear -Manufacturer: PTI, gear, spur gear module 5 18 teeth -Type: M5 Z18 -Shaft holder: I pilot hole Ø 20 mm -Tooth width: 50 mm -Quantity: 2x gear available -Price per piece -Total dimensions: Ø 100 x 75 mm -Weight: 3.0 kg/pc.

[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears

max. wheel diameter: 80 mm gear width: 120 mm max. module: 3 min. module: 1 control: SIEMENS 840 C total power requirement: 30 kW weight of the machine ca.: 7500 t dimensions of the machine ca.: m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 ______________________________________________________ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rate ...

max. wheel diameter: 80 mm gear width: 150 mm max. module: 2,5 min. module: total power requirement: 10 kW weight of the machine ca.: 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 ____________________________________________________________ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min.  ...

max. wheel diameter: 400 mm gear width: NA mm max. module: 1 min. module: 10 total power requirement: 12 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m K L I N G E L N B E R G (Germany) Automatic Bevel Gear Lapping Machine Model LKR 400 A 100 Year 1974/1998 Serial No. 1890 Partially reconditioned and electrically modernized in 1998 by Welter Company _______________________________________________________ Max. Ø of crown gear 400 mm Adjustment of pinion spindle 160 / 250 mm Adjustment of crown gear spindle 115 / 265 mm Additional movements: Axial / distance / vertical, approx. + / - 2 mm Automatic tooth clearance 0 - 0.6 mm Module 1 - 10 Axial offset, up / down, each 50 mm (= axial offset travel from middle position) Bore hole of driving spindle 100 taper Bore hole of driven spindle 60 taper 6 spindle speeds 900 - 1,800 rpm Total ele ...

max. wheel diameter: 400 mm gear width: 500 mm max. module: 15 min. module: 0,5 total power requirement: 2,5 kW weight of the machine ca.: 2 t dimensions of the machine ca.: m H O E F L E R (Germany) CNC Controlled 4 Axis Inspection Centre for Gears Model EMZ 400 Year 1988 Serial No. 067 047 ____________________________________________________ Working range: Min./max. gear Ø / base circle Ø 0 – 400 / 390 mm Module range 0.5 – 15 Gear width, max. 500 mm Travel of measuring head, approx. +/- 180 mm Helix angle 0 – 60 ° Max. weight of workpiece, approx. 250 kg Distance between centres, approx. 1,000 mm Distance between centre and body of counter steady 205 mm Table Ø, approx. 290 mm Plotter diagram scales 50 / 1 ...

Positioning gear, rotary actuator, actuator WMW 5.4 : 1 Gear ratio: 5.4 crank turns = 1 turn of the large gear Positioning disc for crank with 20 snap holes large gear: Ø 64 mm, 30 teeth Small gear: Ø 46 mm, 21 teeth tooth width: 20 mm tooth spacing: 7 mm necessary fastening groove with a width of 128 / 27 mm used, tested ! Dimensions: 440 x 240 x 265 mm

variable speed gear, variable speed gear, spindle variable speed gear, DISCO variable speed gear -Manufacturer: Lenze, DISCO variable speed gear -Type: 11 511 03 00 0 -Speed range: 1000-167 rpm with motor up to 0.37 kW / 1380 rpm -Dimension.: 228/163/H185 mm -Weight: 13 kg

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Neri, gear motor -Gear: Speed: approx. 105 rpm -Engine: Type T63BN/4 -Power: 0.18 kW / 1400 rpm -Shaft: Ø 25 x 80 mm -Protection class: IP54 -Dimensions: 365/125/H165 mm -Weight: 8.1 kg.

Gear motor, electric motor, electric gear motor, variable speed gear motor, variable speed gear motor -Manufacturer: Nord, variable speed geared motor -Gear: Type SK 12-RV10-71 L/4 i= 53.84 -Speed range adjustable: 4.6 - 33 rpm -Engine: Nord type SK 71L/4 -Power: 0.37 kW / 1380 rpm -Protection class: IP54 -Shaft: Ø 25 x 50 mm -Construction: B3 -Dimensions: 580/200/H255 mm -Weight: 27 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Dunkermotoren, gear motor from vacuum packaging system Tiromat 3000/430 -Type: DR 62.0 x 80-2 i= 50:1 -Motor: 0.089 kW 2500 rpm -Gear: 50 rpm -Shaft: Ø 14 x 25 mm -Number: 2x gear motor available -Price per piece -Dimensions: 260/130/H120 mm -Weight: 4 kg/pc.

Gear motor, electric motor, electric gear motor, angular gear motor, automatic band saw -Manufacturer: Ruhr gear, angular gear motor -Type: NDK 8760 -Speed: 3000 rpm -Voltage: 200 V/0.15 A -Shaft: Ø 10 x 30 mm -Accessories: V-belt attachment incl. -Dimensions: 245/160/H155 mm -Weight: 4.5 kg

Gear motor, electric motor, electric gear motor, spur gear motor, gear motor with brake -Manufacturer: Lenze, spur geared motor -Gear: Type GS TO4-2 B VCK 071-32 -Speed: 44 rpm / Torque: 79 Nm -Engine: Type SKhR 71-4B/1561 -Power: 0.37 kW / 1380 rpm -Shaft: Ø 20 x 40 mm -Protection rating: IP54 -Quantity: 2x geared motor available -Price per piece -Dimensions: 375/200/H165 mm -Weight: 13 kg/pc.

adjustable gear motor, adjustable gear motor, electric motor, spindle adjustment gear for eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -adjustable gear motor: comes from a RASTER punching machine type HR 60 NL-4S -Manufacturer: PIV, adjustable gear motor -Gearbox PIV type FKNRHB 23 -Speed range: 255 to 1530 rpm -Drive motor: 160M-4 11 kW -Individual components: see photos -Shaft diameter: 38 x 80 mm -Total dimensions: 1245/520/H420 mm -Weight: 352 kg

The SCHIESS RF 30 gear hobbing machine is a specialist machine for machining large gear wheels. The machine is designed for machining of gears by processing individual pitches of a gear wheel. The milling machine processes a workpiece with diameter from 60 mm to 3500 mm and a weight of up to 25 t. The spindle of the milling machine rotates at a speed from 6 to 69 rpm. The SCHIESS RF 30 machine is designed for milling with: – cylindrical milling cutters in steel / cast iron up to module: 24/30 – disc milling cutters in steel / cast iron up to module: 33/42 – end mills in steel / cast iron up to module: 33/42 50/65 Technical data of the SCHIESS RF 30 milling machine - largest diameter of the milled workpiece: 3500 mm - llargest diameter of the milled workpiece in the circumferential method and with tooth pitch up to 45 3000 mm - lsmallest diameter of the milled part: 60 m ...

Gear, gears, spur gear -Gear: Spur gear 30 teeth -Shaft mount: inside Ø 42 mm -Measurements: see photos -Dimensions: Ø 80 x 60 mm -Weight: 0.9 kg

Straightener, strip straightener with variable gear motor LENZE Type 11.712.02.10 Output speed gear motor 12 to 72 rpm infinitely variable Torque 80 to 40 Nm Straightening roller speed 19 to 115 rpm. Straightening roller width 520 mm Straightening roller diameter 90 mm Number of straightening rollers Total 4 pieces Motor power 0.37 kW Mains connection 380 Volt, 50 Hz - infinitely variable speed adjustment via handwheel on gear motor - Drive via open gear drive straightening rollers Upper part mechanically for adjustment - on stable metal substructure straightening machine was used for cardboard Space requirement L x W x H 630 x 460x 1060 mm Weight approx. 160 kg good condition; used

Gear motor LENZE GKS07-4 M VBR 071C42 303 A ( GKS07-4MVBR 071C42303A ) 0,55 kW 5.7 rpm gear ratio: 246.659 engine: MDEMA1M071-42 2.2 kW 1405 rpm 230 / 400 V 3AC 50 Hz IP55 shaft diameter: Ø 50 mm Shaft length: 100 mm Groove width: 14 mm Flange diameter: Ø 115 / 165 mm bolt circle diameter: Ø 140 mm 6x threaded hole: M12 x 1,75, Depth: 25 mm 2x Gear foot: 180 x 235 mm hole spacing: 150 / 190 mm 1x Gear foot: 180 x 255 mm hole spacing: 150 / 210 mm all bores: Ø 17.5 mm used, tested ! Dimensions: 660 x 300 x 310 mm

Gear motor ETM, ELECTOMOTOR ROMANIA For clamping device for WMW hacksaw type SgB400 2760 rpm Gear ratio: 1 : 2 ( 1x motor revolution = 2x gearbox revolution ) motor: IMB14-80x0,75x1500A 0,75 kW 1380 rpm 220 / 380 V 3AC 50 Hz IP44 2x Gear shaft diameter: Ø 22 mm, shaft length: 27 mm with internal thread: M10 x1.5, depth: 30 mm shaft distance: 30 mm Gear base: 235 x 50 x 25 mm used, tested ! Dimensions: 415 x 235 x 230 mm

Gear motor, for milling machines, two speed ranges HECKERT, MIKROMAT 10050187-118006 05-33:01400:113:000 Gear ratio: 90 : 1 Gear ratio Angular gearbox ( without motor ): 3 : 1 shaft diameter: Ø 32 / 38 mm ( spline shaft profile ), 6 wedges motor: 3.0 kW 1420 rpm 220 / 380 V 3AC Angular gear: Flange for motor: Ø 130 mm / 170 x 170 mm hollow shaft: Ø 22 mm used, tested ! Dimensions: 760 x 320 x 280 mm

Gear motor, electric motor, three-phase motor, worm gear motor, electric gear motor -With external fan: 0.04 kW 2760 rpm -Electric motor speed: 3050 rpm -Translation: 1:7 -Speed gear output: 435 rpm -Power: 1.8 kw -Construction: -Hollow shaft diameter: Ø 28 mm -Dimensions: 650/300/H230 mm -Weight: 44 kg

Gear motor, angular gear motor, electric motor, electric gear motor, three-phase motor -Angular gear motor -Motor power: 0.55 kW -Speed: 48 rpm -Shaft diameter: 20 mm -Construction: B5A -Shaft diameter: Ø 20 x 30 mm -Number: 7x motors available -Price: per piece -Dimensions: 410/230/H180 mm -Weight: 16 kg

Gear motor, angular gear motor, electric motor Electric gear motor -Angular gear motor -Motor power: 0.37 kW -Speed: 105 rpm -Shaft diameter: 20 mm -Construction: B5 angle -Protection class: IP 54 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 420/240/H160 mm -Weight: 17.3 kg

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type KAF37 DRS71S4BE05HR/MM03/AMA6 i = 44.46 -Drive motor: with frequency converter MM03D-503-00 -Speed: 31 - 6.3 rpm -Power: 0.37/0.075 kW -Shaft: Ø 25 x 50 mm on both sides -Protection rating: IP54 -Quantity: 1x geared motor available -Price per piece -Dimensions: 470/290/H210 mm -Weight: 26kg

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type KAF37 DRS71S4BE05HR/MM03/AMA6 i = 106.38 -Drive motor: with frequency converter MM03D-503-00 -Speed: 13 - 2.6 rpm -Power: 0.37/0.075 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP54 -Quantity: 2x geared motor available -Price per piece -Dimensions: 490/290/H190 mm -Weight: 26 kg/pc.

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: MAZ, gear motor with brake -Transmission: Type 80 SD S1 i= 41 / 1 -Speed: 16.3 rpm -Motor: Type B80S/8 K4 0.25 kW / 670 rpm -Shaft: Ø 20 x 40 mm -Protection class: P54 -Brake: 4 Nm -Dimensions: 460/210/H225 mm -Weight: 22 kg

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer gearbox: ZAE geared motor with brake -Gear: Type M 50 B i = 40 : 1 -Speed: 7/70 rpm -Motor: Kobold type PO619-3-16/2MB -Power: 0,04/0.55 kW / 280 /2800 rpm -Shaft: Ø 20 x 25 mm / 23 x 48 mm -Protection class: IP44 -Brake: 8 Nm -fan motor -Dimensions: 610/195/H183 mm -Weight: 26 kg

Gear motor, electric motor, electric gear motor, variable speed gear motor, variable speed gear motor -Manufacturer: Lenze, variable speed geared motor -Gearbox: Type 11 592 03 06 0 i= 1:6 -Speed range adjustable: 14.3 -2.4 rpm -Engine: Hanning Type 7C4-141 -Power: 0.37 kW / 1390 rpm -Shaft: Ø 25 x 65 mm -Construction: B3 -Dimensions: 560/250/H290 mm -Weight: 37 kg

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Nord, gear motor -Type: SK 42125AD-132 S/4 i = 69.30 -Speed: 20 rpm -Engine: Nord type SK 132 S/4 -Power: 5.5 kW / 1450 rpm -Hollow shaft: Ø 60 x 250 mm -Protection class: IP55 -Dimensions: 745/240/H370 mm -Weight: 141 kg/pc.

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Nord, geared motor with brake -Type: SK 20-90S/4 BRE10 TF i = 18.37 -Speed: 76 rpm -Engine: Nord type SK 90 S4 TF BRE10 -Power: 1.1 kW / 1395 rpm -Shaft: Ø 25 x 60 mm -Protection class: IP55 -Brake: 10 Nm -Number: 6x gear motor available -Price per piece -Dimensions: 540/180/H265 mm -Weight: 30 kg/pc.

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: SEW-Eurodrive, geared motor with brake -Type: KH47 DT100L4BMG/HR/TF -Speed: 133 rpm -Power: 3 kW -Hollow shaft: Ø 35 x 180 mm -Protection class: IP54 -Brake: 16 Nm -Number: 2x gear motors available -Price per piece -Dimensions: 650/265/H195 mm -Weight: 51 kg/pc.

Milling head, upper head, mechanically switchable clutch, clutch gear, gear clutch -Clutch gear: Gear for mechanical clutch -Type: unfortunately no type designation -External: Ø 345 mm -Inside: Ø 223/218 mm -Width: Outside 53mm / Inside 70mm -Dimensions: see photos -Total dimensions: Ø 345 x 70 mm -Weight: 8.8 kg

Gear motor, electric motor, electric gear motor, gear motor with frequency converter -Manufacturer: Lenze, gear motor type GST05-3E VBR 063C12 with frequency converter -Speed: approx. 8 rpm i= 179.067 -Motor: Lenze MDEMA1M063-12 -Power: 0.12kW / 1425 rpm -Frequency converter: E82MV371_2B001 0.37 kW -Construction: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 55 -Total dimensions: 500/250/H195 mm -Weight: 20 kg

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: SEW-Eurodrive, gear motor type K37 DR63L4/BR/TF -Speed: 19 rpm -Power: 0.25kw -Shaft: Ø 25 x 50 mm -Protection class: IP54 -Brake: 3.2 Nm -Dimensions: 450/230/H170 mm -Weight: 22 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type WAF30 DAS80K4 / TF / IS -Speed: 173 rpm -Power: 0.25 kW -Hollow shaft: Ø 20 x 100 mm -Flange: Ø 120 mm / 2x with shaft Ø 15 x 30 mm -Recess: Ø 80 mm -Protection class: IP66 -Number: 3x gear motors available -Price per piece -Dimensions: 385/150 / H210 mm -Weight: 14 kg / pc.