z blade used for sale

Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor version: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe 200 mm diameter Machine weight: approx. 900 kg

Feeding Station No product feeder 4 product feeders Foil wrapping station End sealing station Outfeed to Stacker Available: sofort

Hydraulic unit incl. wiring diagram Manufacturer: Aros Hydraulik GmbH Type: HE160-Z21/V5, 5-VAD22/V5, 5-B3/120-LV6P-so. Engines: Manufacturer: Asea motor Type: MBT 132s Power: 5.5 kW Frequency: 3 ~ / 50 Hz Manufacturer: Dietz-motoren GmbH & co. KG Type: 4001540 441883 Power: 5.5 kW Voltage: 380 V Current strength: 11,8 A Valve block: Manufacturer: Lenze Type: 14 128 10 1 0 S 0 Pump: Manufacturer: Sauer / Daikin Type: J V15SA4CRX85 Maximum pressure: 250 bar Filter: Manufacturer: Argo filter Type: HD 046 056 Capacity: 35 l / min Pressure: 210 bar max. New price: approx. 7900

ZENO Disc Screen ZSS 1200 x 4200 Working width: 1200 mm working length: 4200 mm drive: 2 x 7.5 kW screen fraction: 0-80 mm disk diameter: Ø 350 mm

Cone cutter Makita, type 5500 S in a fit state. Volts 220 volts motor power 1400 Watt speed of 1650/2200 lateral adjustment range 45/20 mm clamping range Max (Hxw) 240 x 210 mm trunnion strengths 0 mm to 130 mm PIN length an average 90 mm

Ziehm Vision RFD 3D is the world's only 3D C-arm with flat-panel technology that provides a 16 cm edge length per scan volume combines 2D and 3D functionality to offer maximum intraoperative control. THE ULTIMATE C-ARM TO OUTPERFORM The treatment of cardiovascular and degenerative musculoskeletal conditions calls for high-performance intraoperative imaging technologies. Incorporating the latest CMOS technology for excellent image quality, the Ziehm Vision RFD is the ideal product. In addition to the cardiovascular-focused 20.5 cm x 20.5 cm flat-panel version, the Ziehm Vision RFD is available with a 31 cm x 31 cm CMOS flat-panel detector. This is the preferred model for highly demanding orthopedic, trauma or cardiovascular interventions that require more information in one image. Both systems are equipped with a powerful generator for optimum penetration, Advanced Active Cooling to e ...

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

Working width: 820 mm rotor flight circle: Ø 720 mm drive: 90 kW cutting system: 8 cutting blades equipment: mechanical adjustment of the cutting gap Machine weight: 3500 kg

Blow-through lock, all-out lock, cell lock, rotary valve, cell wheel lock, dosing lock used AZO GmbH Type: Z100/5 F 4.6 Inlet approx.: Ø 250 mm Height approx. 450 mm Cell wheel Ø approx. 300 mm Rotary wheel width approx. 250 mm Wing height approx. 15 mm approx. 8 cells Hole circle flange Ø approx. 335 mm with intake filter NW 100 EIT-4181 geared motor Sew 0.18/0.66 kW 7.3/30 rpm 380 V Total dimensions approx.: 1800 x 400 x 450 mm The lock was used in the food industry. Presumably for transport and dosage of flour. used Rotary Valve, Rotary Airlock, Dosing Valve, Dosing System Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Working width: 2000 mm rotor flight circle: Ø 1000 mm drive: up to 315 kW cutting system: 40 piece cutting bars facilities: counter knife traverse pivoting hydraulically Right-left operation Hydraulic hood opening Screen: hydraulically extendible

Type: ZSA 1500 Working width: 1500 mm Flight circle metering drum: Ø 1600 mm Motor power: 18,5 kW Length metering device: 7800 mm Width metering device: 1600 mm Volume metering device: approx. 25 m ³

The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...

Infeed width: 720 mm infeed height: 330 mm rotor flight circle: 1000 mm number of cutting knives: 2 piece number of counter knives: 1 piece infeed: 2 x 3 rolls motor power: 110 kW screen perforation: Ø 30 mm machine weight: ca 7,800 kg

Make: BITZER Type: S4G-12.2-40P Funding volume: 42.3 m3/h Built year: 1997 with 3 compressors for freezing Two-stage Price on request

ZOLLER SMILE / PILOT 3.0 presetting and measuring machine was manufactured in 2019 in Germany. The machine is a professional tool measuring and presetting device, whose easy operation and precision guarantee flawless results. A telecentric lens and a CCD camera with integrated LED ring for measurements in reflected light (blade inspection) are used to perform the measurements. ZOLLER SMILE 420 is equipped with the CNC controller ZOLLER »pilot 3.0« and functions such as automatic blade recognition, measurement of radial run-out and axial run-out, maximum contour function and cutting edge control. The tool to be measured can have a maximum length of 420 mm and a maximum diameter of 420 mm. Specifications of the ZOLLER SMILE / PILOT 3.0 presetting and measuring machine - maximum tool length Z: 420 mm - maximum tool diameter D: 420 mm - diameter measurement according to Abbe’s p ...

Make: BITZER Type: S4G-12.2-40P Funding volume: 42.3 m3/h Built year: 1997 with 3 compressors for freezing Two-stage with switch box Price on request

for the production of products cast in moulds, such as chocolate bars, bars, etc. Accessories unit for SELMI Temper TOP EX only 1 year in production

2 cyl. Deutz engine F2L1011, 18.5 kW, 25 HP, with Atlas Copco compressor

E engine durchfl. Water cooled Three-phase asynchronous motor Manufacturer: ELIN Model: MKH-435 K04 Z9Z Performance: 315kw Supply: 400 V Revolutions: 1336/min Weight: 1700kg NEW, original box, unused from old stock for further details please refer to the pictures.

Full automatic video inspection and packaging system for plastic caps. Different sizes. Include elevators, hopper ZALKIN, two camera video inspection COGNEX, packaging system.

Make: BITZER Type: S6G-25.2Y Funding volume: 101.1 m3/h year built: BITZER two-stage, 25 KW at minus 35C for freezing, shock freezer Price 3,300,- Info: 0043-6641838175 or info@frigocom.at

RECON Part number: 0400 5839 E-start Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Angular swivel unit, Accuracy 0.01°, SW100D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swing angle 180 [°] Torque 15 [Nm] Repeatability +/- 0.01 [°] swivel time 0.5 [s] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Operating temperature 5 ... +80 [°C] Cylinder volume per cycle 108 [cm³] Weight 6.3 [kg] 10 million maintenance free cycles, Positioning 2 positions, e ...

Angular swivel unit, Accuracy 0.01°, SF100-90D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swivel angle 90 [°] Torque 15 [Nm] Energy transmission pneumatic 4 [number] Swivel angle adjustable +/- 3 [°] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Repeatability +/- 0.01 [°] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Nominal operating pressure 6 [bar] Operating temperature min. 5 [°C] Operating temperature max. + ...

Used machine as good as new Grinding length: 600 mm Grinding width: 400 mm Workpiece height: 450 mm Table clamping area: 600 x 400 mm Grinding wheel dimensions: 300x50 mm Grinding spindle motor: 3.5 kW Table speed: 0 - 30 m/min Grinding wheel speed: 0 - 35 m/s Magnetic plate size: 600 x 400 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t Room requirements approx.: 3.5 x 2.5 x 2.5 m 12 month warranty Paper filter machine Automatic table dressing with compensation 1 pc. flange Setting-up elements

1 of used film-only shrink wrapper, make ZVT (KHS), type SP030V, new 2000. Operating side: left. Capacity 30 cycles/minute nominal, 35 cpm in overspeed. Siemens S7 PLC. Indramat EcoDrive servo's. Used for PET bottles in clear and print-registered shrink-wrap film as: 500 ml, D 63.5 x H 230 mm, 3x2=6, dual-lane, 1.000 ml, D 80 x H 281 mm, 3x2=6, dual-lane, and 1.500 ml, D 89 x H 332 mm, 3x2=6, dual-lane. Future option (no parts supplied) was 2.000 ml, D 100 x H 349 mm, 3x2=6 and 2x2=4, dual-lane.

Universal milling machine with automatic movement ram. Table: 1700x700. Longitudinal travel: 1320mm. Cross travel: 1016mm. Vertical travel: 560mm. ISO50. 18 speeds (28-1800rpm) 18,75 Hp. Weight: 6200Kg.

A volume of depositors of the SIG type ZHG They can provide these depositors a SIG-GS or SIG-GRT We advise you gladly Phone: 0049 1718367957

S1 - insulated 40,000 litres steel tank, aboveground storage tank, cased in zinc plates, heating coil inside, on 2 steel bases, former palm oil tank, good condition. Details of the tank: Contents: approx. 40 m³ / 40,000 litres material: stainless steel tank length: 9,00 m diameter: approx. 2.70 m incl. insulation / 2.50 m without insulation insulation: mineral wool approx. 10 cm, with zinc plating other: heating coil inside, single-walled The container is used, emptied inside and has been cleaned professionally. According with the age there are traces of use. This steel tank / container can be used as a storage tank for whey, vegetable oil, water, liquid food, many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily.  ...

Products For square, rectangular or round biscuits and baked goods suitable for roll separation Feed/System integration • For feeding pillow-pack and wrapping Machines • Presentation direct to portioner always with vibratory channels • Manual or automatic portioner infeed • Own drive Technical features • 4 to 12 channels

ZERMA GSE 700 plastic granulator machine manufactured in 2018, is used in the processing of lightweight plastics such as PE, PP or PVC. The granulator has a specially shaped hopper with splash protection, inside of which there are fixed knives and a rotor with knives arranged in a ‘V’ shape. The rotor is driven by a slide-rail-mounted electric motor with tension-screw adjustable V-belts. The ZERMA GSE 700 plastic granulator machine can even cope with larger pieces of plastic, such as lumps and film rolls, thanks to the use of a deflecting wedge and block knives to prevent the rotor from blocking. All of the machine’s components are mounted on a base frame, fitted with mounting pads to dampen noise and vibration.

Cylinder head for MWM TBG 620, TCG 2020 needed, not overhauled. Can we get over on request. Quantity: On request. Please note: We have various other parts of from different manufacturers and types available.

CTX Toastmaster Pizza oven stainless two level pizza oven on mobile frame, stainless mesh belt, 450mm wide belt, variable speed, adjustable temp control

Expansion tanks Zilmet. 500 litres

Abegg to fan and the fan with fans Ziehl. noch nie benutzt NEW

Injection pump from a Liebherr excavator Operating hours approx. 2,000 hrs pump was upgraded to electric Storage device is replaced. Pump is fully functional Special price

PTO hydraulic pump unit consisting of 1 piston pump (manufacturer unknown, no label present, only cast characters (only read number: 479 and 40 °) and a gear pump HALDEX W15A1 44 L K5 26NN.) Unaudited for screwdrivers for recovery. -Jacobis local, environmental & green care technology- Used machines for plant & sports center maintenance, Garden & landscaping, cemetery technology & winter service, sweeping work & disposal, environmental care, motors and more...

Machine Type: Cold Water Hose Manufacturer: for washing machines Type: 1/2 inch Condition: new Offer will only be sent if a complete imprint is provided! Price 250 Euro incl. 19% VAT free loaded. Location Warstein , Germany Reference M-SCH-0124-3 DESCRIPTION We offer you a lot of new hoses / up to 10bar / 25 degrees Specifications can be found on the sign in picture 2. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!

4 used LTG KENYA dust and fiber separators and compactors, year 1995, each composed composed of: centrifugal fan (radial blades) dust suction ventilator, motor with 11 kW power, blade diameter 800 mm cyclone centrifugal dust separator (Vortex) type ZSC 200, for air volume up to 2000 m3/h LTG compacting power screw (CPS), screw diameter 110 mm, motor with 0,75 kW power dust quantity up to 100 Kg/h

- Toothed gear MWM 12302143 - Suitable for several motors - Please note! Price per piece! - 12302143 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new  ...

1 ZELTEX laboratory high temperature dyeing machine type Colorstar CS1-F/2L, SEDO PC1000 dye cycle controller, for 6 inch bobbins

P93 - used approx. 11 m³ / 11,000 litres polyester tank / GRP-tank, aboveground, vertical, on ring base, Juno-tank, in good condition. volume: approx. 11 m³ / 11,000 litres material: polyester / fiberglass diameter: approx. 1.70 m height: approx. 5.50 m Vertically standing, aboveground storage tank by manufacturer Juno. Round shape, on ring base, dome on the front side, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is ...

ZIEGLER C41-20A - air forging hammer Hammer weight: 20 kg Strokes: 270/min Lifting height: 200 mm Projection: 180 mm Cylinder diameter: 115 mm Hammermasse: 90 x 50 mm Engine power: 2,2 kW Voltage: 400 V Dimensions WxHxD: 460 x 1110 x 820 mm Weight: 380 kg Equipment: Hand - and foot operation, integrated Ambos Base optional

Fluid mixer for tempered mixing with double sheath, 350 l. content (usable volume: 100 l. - 280 l.), outlet sideways, pressure-resistant up to 10 bar, product-contacted parts made of V2A 1.4541; without tools.

FEEDER BELT - CONVEYOR BELT GFB 600 FOR INJECTOR GÜNTHER PI 104/236 - overhauled, in gut condition Belt width 600 mm Belt length 810 mm Total length 1360 mm Width 1210 mm Height adjustable from 1010 to 1260 mm Request a quote on iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36