z blade used for sale

System: Used decanter / centrifuge Manufacturer: Flottweg Model: full coat screw centrifuge Type: Z53-4/454 . No.: 007-135-03 B.: 1999 Drum: max speed. 3250 min-1 Drum inner diameter: 529 mm Drive motor drum: Lander Type: ANGA-225ME-04A Voltage: 400 V Service: 55kW, 105A, 1465 U/min Hyraulikaggregat: Loher 1450 RPM Buying and renting possible.

Wir verkaufen einen generalüberholten DC12 54A Zündstrahlmotor mit komplett neuen Teilen. Der Motor wird vor Auslieferung aus unserem Werk noch einmal auf unseren Prüfstand gebracht.

5 sets of knives for the three-knife trimmer Muller Martini Zenith 3672 Tungsten Carbide Quatro

ZIMMER THERMOCURE TEXTILE FABRIC CURING MACHINE / EDGER High Capacity Hot Air Dryer MAKE : ZIMMER TYPE : THERMOCURE UHD 3 YOC : 2005 WW : 2000 mm CONTENT : 240 m HEATING : HOT OIL GAS FIRED WITH THERMAL OIL BOILER TEMPR : MAX. 250 C

2.1.1. Walk-in cleaning booth, pre-treatment for steel and aluminium The cleaning booth is designed for automatic cleaning. Spraying can be done at medium pressure. There are 7 different spray tanks in the cabin. The part sizes are max. L= 6,000mm, W= 2,000mm, H= 2,300mm. 1 Dimensions of the cab length 6,500 mm Width 3,000 mm Height 3,600 mm 2 dimensions of the pre-treatment complete Length 6,600 mm Width 4,640 mm Debpm0Nom Height 4,300 mm 2.1.1.1. 1. Degreasing/Neutral Pickling Process Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.2. 2. Process Acid Mineral Pickling Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.3. 3. Rinsing Process 1 in this chamber rinsing is done at ambient temperature, time = 0.75-1.5 minutes, draining time = 1 minute 2.1.1.4. 4. Rinsing Process 2 in this chamber is rinsed at ambient tem ...

Groninger ZSK800 Cap Sorter BJ.2002 With 5 different format sets Universally applicable, in very good condition!

A measuring device for the characterization of particles, emulsions, colloids and biomolecules in liquids is available. Laser power: 4mW, wavelength: 632.8nm, primary measurement function: zeta potential measurement, particle size measurement range: 3.8nm-100µm, software compatibility: Zetasizer v8.01 with GAMP5 conformity. Zeta potential measuring range: +/-500mV, measuring principle: DLS and laser Doppler electrophoresis, min. sample volume: 12µL, measuring angle range: 13°-173°. Machine dimensions X/Y/Z: approx. 500mm/300mm/240mm, weight: approx. 15kg. Including 2x used and 1x brand new flasks. The machine was serviced in 2024. Documentation available. On-site inspection is possible.

BIG suitable for Merlo ZM2 and Heavy Duty attachment, - Year of construction: 2025, - made of S355 steel, - HD version, Dimensions:, Top bolt: Ø 50 mm

LEISTRITZ 2x67 mm TWIN SCREW COMPOUNDING LINE, Starve feed hopper extruder with 2 x 67 mm Ø segmented, co-rotating screws 34 L/D max screw speed 300 rpm 6 heating areas on barrel vacuum degassing pump d.c. motor 75 kw with forced vent fan control panel size 0,4×1.15 x 2 mt. Dimensions :LxWxH 4,7 x 0,72 x 1,835 mt. weight about 3.000 kgs construction year 1993 machine offered reconditioned, availability: 7 weeks from confirmation, options available: cooling bath, strand pelletizer, conditions: reconditioned

Vertical Shaft Horizontal Impact Crusher / Mill, With dosing feed hopper

Vacuum filler bloc Stork/Zalkin 32/8 with 32 filling valves and 8head screw capper running direction: from right to left with frequency inverter with safety housing for 0,2 - 1,0 ltr. bottles

14.3 kW / 50 Hz / 400 V L x W x H : 3280 x 1360 x 4376 1.5 t Air speed adjustable via display Complete documentation available (digital / paper) Used in a test facility, a few hundred hours of runtime. Can be visited incl. switch on / test

Item No. Z-HF63-WH - 30 cm rack with 30 plates - As good as new device, built in 2022 - Total Trubraum approx. 249ltr. - Total filter area approx. 19.5m² - With electric hydraulic pump - without feed pump - Connection thread DN50 DIN 11851 - with monofilament cloths and end cloth - 1 year functional warranty

Used Overhauled Capsuling Machine Bertolaso ZETA 105 up to 5000 bph Introduction The used overhauled Bertolaso ZETA 105 capsuling machine offers a reliable and efficient solution for high-speed bottling. Specifically, this machinery works with polylaminate caps and ensures optimal productivity of up to 5000 bottles per hour. Technical Features of the Used Overhauled Capsuling Machine Bertolaso ZETA 105 Moreover, the Used Overhauled Capsuling Machine Bertolaso ZETA 105 features five smoothing heads that enable rapid and uniform capping of bottles. Additionally, its multi-head configuration processes each bottle with precision, significantly minimizing the risk of errors and enhancing the overall efficiency of the production line. Consequently, the machine weighs 830 kg, reflecting its robust and durable construction, which withstands intensive operations. It is important to note that the  ...

4-color format: 1300 mm<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

1 used shrink tunnel, made ZVT (now KHS), type ST/II-600DG. Built in 1995. With belt braiding tape (for untabivalent products such as PET bottles). Total length 6,000 mm. Passage 570 mm High x 400 mm wide. E-connection 415V (x5%) / 50 Hz. Top condition (belt recently renewed!). Operator side: right or left. (2 machines available).

Cement different quality and country of manufacture. All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own ...

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Machinery and equipment for the production of cement, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own e ...

Different fan types and models

Zylinderkopf im Austausch DEUTZ BF4M2012/C komplett überholt mit Ventilen. sofort ab Lager lieferbar info@miw-zeven.de

Bizerba counting scale with tare running weight device from Wilh.Kraut-Komm.-Ges. Maximum load 30 KG

Ladies and gentlemen, we are pleased to offer larger quantities of sugar for sale. If you are interested in our offer, please contact us. Yours sincerely Trade & Translations

All other original spare parts are available immediately from stock. o.g.Price are applicable. Freight+Packaging+law. Tax Please check the number of teeth ! MIW Ltd. Engine Repair Plant GmbH North-West Ring 8 D-27404 Zeven-Germany Tel:0049(0) 4281 950583 Fax:0049(0) 4281-950585 e-mail:info@miw-zeven.de abc.miw-zeven.de

intake opening: 2,500 x 2,000 mm rotor flight circle: 580 mm each rotor execution: special teeth motor power: 2 x 90 kW with planet gears weight: approx. 18,500 kg

ZENO double roller vorader ZDV 2500x2000, mobile on chain suspension, with discharge conveyor and magnetic separator, drive power 298 kW, 1900 rpm, MTU diesel engine, rotor flight circuit 575 mm, 2 x 12 rotor tools on tool holders, new design demonstration machine. ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU diesel motor, rotor flight circle 575 mm, 2 x 12 cutting inserts on tool holder, show machine.

Manufacturer:ZM Zwickauer Maschinenfabrik Year: 1993 Power: 30 kW Allowable Operating Pressure: 8 bar Rotation speed: 5870 1/min Technical data of supply fan: Manufacturer: ILKA VEB Turbowerke Meißen Type: Lann 500 Year: 1991 Weight: 28 kg Flow: 1,43 - 1,94 m^3/s The total increase in pressure: 358 - 177 Pa Fan rotation speed: 1450 1/min Power: 0,7 kW Technical data of motor: Manufacturer: VEM Elektromotorenwerke Thurm Type: YP 1G4 Rotation speed: 1380 obr/min Power: 0,75 kW Voltage supply: 220/380 V 50 Hz The current consumption:3,45 / 2,0 A Weight: 11 kg Technical data of transformer: Manufacturer: TuR Transformatoren und Rontgenwerk Type: SVS 372 Year: 1991 Power: 37 kW Voltage supply: 380 V Control voltage: 220 V Nominal current: 72 A

Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg

intake cross section: 2500 x 1,700 mm motor power: 160 kW rotor flight circle: 670 mm rotor execution: cutting inserts on tool holders counterknife: with cut gap adjustment machine weight: approx. 24,000 kg

intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox

1 work place certified, very well received., absolutely Mint double girder overhead travelling crane with helical rope stabilized LEG / DEMAG trolley Load approx. 2 x 4,000 = 8000 kg capacity of the hub works about 2 x 6,300 = 12,500 kg Wingspan approx. 10.880 mm Hook path about 10,000 mm Make SCHEFFER Year of production/workshop test 1996/2016 Crane classification H 3 B 4 Crane equipped with: -De-MAG lifting works in FEM 3 m, schrägseilstabiliert -Demag Crane and trolley motors -Radio control -Magnetic control -Magnetic beam with sheet metal magnet -SCHENCK weighing device -Long travel with frequency inverter control Working speeds: Hoist around 1.2/12.5 m / min Trolley gear approx. 8.0/32.0 m / min Crane chassis approx. 5.0 80.0 m / min

intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons

1 high quality, factory-tested, well preserved double girder crane especially suitable for the Coilumschlag Load approx. 80,000/32,000 kg Wingspan approx. 25,600 mm Hook way approx. 8,500/13,500 mm Make SIEMAG/SIEMENS Overhaul and rebuild/workshop test 2009/2016 Trolley in robust wind plant design, between the crane bridge catwalk one-sided lowered to optimize the installation height, cabin control (expandable easily on radio), operating speeds: Main hoist 80 t to approx. 4.25 m / min auxiliary hoist 32 t up to approx. 10.8 m / min Katz LG 32/80 t Max approx. 40.0/20,0 m / min Crane chassis 32/80 t Max 80.0/40.0 m / min

- Hand & foot operation - integrated anvils - massive substructure - Hammer weight: 25 kg - Stroke: 250 rpm - Lifting height: 250 mm - Extension: 200 mm - Cylinder: 125 mm - Work shoehe: 765 mm - Engine power: 3 kW - Voltage: 400 V - Ground WxHxD: 460 x 1520 x 970 mm - Weight: approx. 670 kg

Of used filter cake-cerium-smaller impulse: Springs a filter cake-cerium-smaller exists of two mutually running knife waves they chop up the filter cake.

1 factory-tested, very well preserved double girder crane with 4 wheels per side to minimise wheel loads Load approx. 100,000/32,000 kg Wingspan approx. 26,700 mm Hook way approx. 14,000 mm Make SKET-year of manufacture/overhaul/workshop test 1981/2000/2016 Very low equipped with high-quality two-rail wind work trolley with main hub usage as a mounted crane 100 t and auxiliary hoist 32 t, cabins - and radio control, ideal wheel load distribution by 4 wheels per side working speeds: Hoist main hoist 100 t up to 0.25/2.5 m / min auxiliary hoist 32 t up to approx. 7.0 m / min Trolley gear approx. 7.0/20,0 m / min Crane chassis approx. 11.0/32.0 m / min

Of used filter cake-cerium-smaller a filter cake-cerium-smaller exists of 2 mutually running ones knife waves. according to medium a filter cake comminution at approx. 50-mm grain size can be reached.

4 Cyl. Ford industrial engine, alternator, tractor Ford 5000, pass.f. New Holland Mähdr. 8030

Unit for painting booth: Make : Wolf Built: 1992 / 2002 Dimensions: 1.5 m x 5.0 m x 2.9 m (approx. WxLxH) Heating unit: 160 kW, hot water exchanger Dry temperature: 60 degrees C Supply air unit: 21,500 m3/h; 7.5 kW; 1500 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1500 rpm Speed control: with frequency inverter Electrics : Control cabinet Unit for double drying cabin, double dryer: Dimensions: 1.2 m x 1.6 m x 3.0 m (approx. WxLxH) Heating unit: 140 kW, hot water exchanger Dry temperature: max. 60 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1500 rpm Location : Nuremberg Warehouse Sell price: € 9,990,-, net from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

1 of used wrap-around /traypacker, make ZVT (KHS), type Innopack WP 030 VH. New 2000. Operating side; left. Capacity upto 30 cartons/trays per minute (depending on product and blank dimensions). Siemens S7 PLC with OP 17, Indramat Servos, Nordson hot-melt unit. Wired for 400V / 50 Hz. Used for packing various 330 ml upto 2.000 ml glass and PET bottles as 8/12/20/24 on tray or in full wrap-around cartons. Last used as tray-packer only. Various manuals available. Condition: good. Dismantled and available cleaned ex-warehouse The Netherlands.

1, used, very well preserved double girder overhead travelling crane with 4 wheels per page of optimal wheel load reduction Load approx. 110.0/50,0 t Span 23.20 m Hook way approx. 15.0 m Make Horw Workshop examination 2016 Use as very low mounting crane Equipped with high-quality, robust two-rail - wind movement trolley, ideal wheel load distribution by 4 wheels per side, catwalk along the Crane bridge, cabin, as well as floor panel (easily to expandable radio control) Working speeds: Hoist gear 110T approx. 0.3/1.5 m / min Change-over 50 t approx. 0.6/3.0 m / min Katz LG 4.0/16.0 m / min Crane chassis 10.0/40.0 m / min

Turbocharger - recon

Inlet cross-section: 1200 x 2300 mm Drive: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 RPM Rotor version: 24 single tooth Screen design: reinforced solid basket, with ribs Hopper: 1,000 mm in height, without lid Machine weight: approx. 6,000 kg Machine number: G-1-66

<br>Hand system 15 stations f r Calendar production<br><br>Still in operation: No.<br>Available: immediately

Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum

Maximum label roll diameter 350 mm Rollenkerndurchmeser 76 mm, incl. adapter for other diameters Stufenos adjustable wrap speed Dimensions 800 x 400 x 300 mm (L x W x H)

Blacksmith hammer / air hammer Zeva machines 16 bear Air / forging hammer 16 bear Max 250 strokes/min Working cylinder diameter 90 mm Stroke approx. 170 mm CLOUT approx. 16 bear Anvil is connected to machine Ambosswerzeug can be changed CLOUT and Geschwindegkeit can be controlled with foot switch and hand 1.5 KW, 250 kg If you are interested in air hammers with 25Baer, 40Baer, 55Baer and 75Baer write me a short message!

Feeding Station No product feeder 4 product feeders Foil wrapping station End sealing station Outfeed to Stacker Available: sofort

Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor version: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe 200 mm diameter Machine weight: approx. 900 kg

ZENO Disc Screen ZSS 1200 x 4200 Working width: 1200 mm working length: 4200 mm drive: 2 x 7.5 kW screen fraction: 0-80 mm disk diameter: Ø 350 mm