135,644 used machines on RESALE, but how to find them? Machine Search
Industrial axial fan 800mm diameter ZIEHL-ABEGG fn80-sdi.6n.v7 NEW! Sold in a box of several pieces manufacturer: ZIEHLL-ABEGG type: FN080-SDI.6N.V7 Axial fan with sickle-shaped aluminum blades Diameter: 800mm Ø airflow: 10000-21000m3/h nominal airflow: 15800m3/h at 140pa air pressure motor power: 1.15kw/0.53kw Nominal values 3. phase~400V D/Y 50Hz 1.55/0.95kW 3.3/1.7A rpm:850/650/min Protection type:IP54 sound level:70 dB COSY 0.69 max temperature range:80°C Motor protection: thermal contact Protective grid type: mesh grid Dimensions (w x h x d) mm: 861 x 861 x 273
Manufacturer: HOFFMANN Model: RAWT Z5x4000x500 Year of Manufacture: 2001 Technical Data: - Frequency: 50 Hz - Operating Voltage: 400 V - Rated Current: 370 A - Control Voltage: 24 V DC - Solenoid Voltage: 24 V DC - Hydraulic Fluid: HLP46 DIN 51524 T.2 - Filling Volume (Hydraulic Fluid): 630 l - Max. Operating Pressure: 200 bar - Lubricating Oil: CLP68 DIN 51517 - Filling Volume (Lubricating Oil): 15 l - Workpiece loader/automation, 3 tool/clearing beams are included with the machine. - The machine has been used in 3-shift operation and is essentially in original condition. - Various spare parts (drive motor, gearbox, and other existing spare parts) can be purchased separately. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Key data: 250 t
Inv. Num. : 8652 Type: ZHS 250 Producer: ŽDB Hydraulika Generated: 2000 Parameters: Compressive force: 250 t Table length: 3500 mm Table width: 1200 mm Stroke: 700 mm Ram dimensions: 3500 x 1200 mm Working speed: 13-60 mm/s Machine height: 6000 mm Machine length: 3000 mm Machine width: 5000 mm Machine weight: 60000 kg
Extruder line Werner & Pfleiderer type ZSK with : Feeding system with forced agitated hopper Ø53x33D twin screw Manual filter changer, model CFM75 Rod granulation head 10 wires + 6 wires Immersion tank, model TI400/4 4 M Periplast dryer Granulator Sieving
grinding length: - mm grinding width: - mm workpiece height: mm control: Fanuc total power requirement: kW weight of the machine ca.: 1550 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Zeiss UPMC 850 Carat measuring machine for sale • Travels: X = 750mm; Y = 850mm; Z = 600mm • Portal design • Pushbutton magazine with 8 slots • Measuring ball • Probe set • HP working station with monitor
An FTH Fördertechnik bag palletizing system is available. Formation: 5-bag, palletizing capacity: approx. 1500 bags/h, pallet dimensions X/Y 1: 1200mm/800mm, pallet dimensions X/Y 2: 1200mm/1000mm, stacking pattern: variable, overall system dimensions X/Y: approx. 12600mm/5700mm. An on-site inspection is possible.
Various accessories for a Bridgeport milling machine according to photo 3 jaws Chucks, face plates, milling cutters, collets and much more.
TECHNICAL SPECIFICATIONS Manufacturer: Tecnomeccanica ZUERCHER S.p.A. Bergamo Description: Floating grab dredger Design: Grab excavator with gantry body Type: TZBK 150 (15t) Year of manufacture: 1989 - Revised: 2017 Gripper volume: 4.50 cbm Shell grab type: MRS 1090, rope mechanical Total load capacity grab: 15.0 to. Max. dredging depth: 60 m underwater Conveying capacity: approx. 100 cbm/h (approx. 180 t/h) Power supply: SENN generator set (BJ 2017) Unit Type: FDG 650 Engine: VOLVO TWD 1653 GE (6-cylinder) Rated power: 650 kVA (547 kW) Particulate filter system: CLEAN LIFE, type SMF-AP 8.1 Pre-screen bar grate available: yes Screening machine: 1-deck, with shower Dewatering Bucket Wheel: SMT Stitch Type: E3009 (BJ 2017), 3.0 kW Number of mooring winches: 4 pcs. Number of discharge belts: 4 pcs. Overall length: 25,190 mm Total length pontoon: 20,800 mm Overal ...
We sell here 3 cylinder head AT; V-engine, 3rd version of the brand Liebherr. Without thermocouple. With serial closure plugs. Repaired by engine rebuilders. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how with ...
workpiece diameter: 300 mm workpiece weight: 999 kg workpiece height: 999 mm grinding length: mm grinding width: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Ausstattung: -Digitalanzeige senkrecht Achse -Automatische Zustellung -Automatische Endabschaltung programmierbar -Schleifspindelantrieb mit stufenloser, elektronischer Drehzahlregelung -stufenlos regelbarer Quervorschub, und Tischdrehung -24V Magnetspannplatte 300 mm -diverse Arbeitsschutzeinrichtungen z.B. Schutzhaubenüberwachung, Betriebszustandsanzeige per Ampel -Schmierölstandsüberwachung -die Maschine wurde 2015 generalüberholt, damals Austausch der gesamten Elektrik auf SPS-Steuerung und 24V Steuerspannung -Papierbandfilteranlage speziell für diese Maschine passend Folgende Arbeiten wurden nun noch durchgeführt: -Austausch Faltenbalg und Riemen -Schleifspindel neu gelager ...
Height=0.19 m, Overall length= 0.34 m, Overall width= 0.35 m, Net weight= 18 kg,
WIEPOFAMA ZFB-50 gear hobbing machine was manufactured in 1970 in Poland by Wielkopolska Fabryka Urządzeń Mechanicznych-Poznań. The machine is used for the precision hobbing of spur and helical gears. Machining is performed by means of the hobbing method, in which the teeth are gradually formed around the entire circumference of the workpiece. The use of this method ensures high dimensional accuracy and repeatability of the produced parts. The ZFB 50 gear hobbing machine enables the machining of gears with a maximum module of 10 mm and a diameter of 700 mm. The set of interchangeable wheels included in the offer enables flexible adjustment of working parameters to a specific type of tooth profile. All this is complemented by a robust design that ensures high stability even during the most demanding challenges. All of this makes the WIEPOFAMA ZFB 50 gear hobbing machine the best cho ...
Key data: 100 t
Sale due to switch to eccentric press Pressing force 100 tons Loading depth 360 mm Stroke 500 mm Daylight 800 mm Plunger area 530 x 400 mm Table height above floor 710 mm Working speed 10mm/sec Approach speed 150 mm/sec Return speed 150 mm/sec Required power 17 kW Dimensions L x W x H 1,400 x 2,000 x 3,200 mm Weight of the machine approx. 5.1 t Year of manufacture 2001 Price is net, VAT can be claimed. Loading facilities available All information without guarantee
JAZON ZXB5150 vertical drilling machine was built in 2010 in Poland by JAZON Sp. z o.o. The machine is used for precision drilling of holes with a maximum diameter of 50 mm and threading up to 35 mm. The machining process is performed by means of a working head with a powerful spindle, which reaches a speed of up to 1600 rpm. The spindle feed and quill adjustment allows exact adjustment of the working parameters to the type of workpiece, ensuring high precision and repeatability of the performed operations. Workpieces are mounted on a large work table with a length of 800 mm and a width of 600 mm with three T-slots. The workspace is illuminated by a lamp mounted on the frame of the machine. All of this makes the offered JAZON JWK 50 ZXB5150 column drill press the ideal choice for locksmith workshops, tool shops and production plants. The total weight of the machine is 1350 kg. Technic ...
Used double-belt press made by Voran, model: ZBP1100. New 2017. The Voran ZBP1100 belt press is fully automatic and operates continuously, requiring only minimal supervision. Smooth adjustment of speed and pressing force guarantees optimum juice quality and high efficiency, reaching up to 80 per cent. The belt press is versatile and can be used for various types of fruit (stone fruit must be pitted before pressing), berries, vegetables and for drying various materials. The juice is discharged from the machine via a fitted juice pump. Particular attention has been paid to ensuring easy access to all parts of the system and their easy cleaning. Intended use: pressing apples, pears, berries, grapes and other soft fruits Technical specifications - Capacity: up to 7,700 kg/h (actual capacity depends on the type and quality of the raw material) - Juice yield: 80% - Loading or un ...
Tool presettler Zoller smile 400 pilot 2 BJ 2008
Roby junior semi automatic casemaker suited for 3 piece cases format 50x70 cm light table for spine hot animal glue 2 sides turning in unit
Tenon and slotting machine, tenon cutting machine, tenon cutter, slotting rotor, tenon cutting and slotting machine -Recirculating rotor: 3 positions -Length stop -Workpiece tension -Dimensions: 1400/800/H1500 mm -Weight: 560 kg
Single phase generator, Multiple units in stock, , Stage V generator, StV; Gross weight [kg]: 393; Engine: Kubota Z482 E4BG2-EUP-1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets, Including extension cable; Water Tank Volume [l]: 120
A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.
Key data: 400 mm, 200 mm
Ziersch & Baltrusch FS 2040 - Surface Grinding Machine - Magnetic clamping plate 400 x 175 mm -Hydraulic - Coolant device -Bandpass filter - Automatic transverse stroke not functional - Year of construction 1988 Specifications - Grinding area: 400 x 200 mm - Height adjustment: 410 mm - Magnetic table: 400 x 175 mm - Grinding wheels: 200 x 25 x 51 mm - Grinding wheel speed: 1420 / 2840 rpm - Motor power: 1.5 kW - Dimensions WxHxD: 1700 x 2100 x 1500 mm - Weight: approx. 1100 kg
x-travel: 10000 mm y-travel: 3000 mm z-travel: 1500 mm Control: Heidenhain TNC 430CA milling head -swivable: 360.000 pos spindle turning speed range: 10 - 3000 U/min Tools changer: 40 pos. feed: 5000 mm/min Rapid Travel X / Y / Z-Achse: 10 / 15 / 15 m/min spindle motor: 37 kW total power requirement: 80 kVA weight of the machine ca.: 40 t dimensions of the machine ca.: m Traveling column milling and boring machine - Control Heidenhain TNC 430CA & HR 410 - autom. Tool changer with 40 places (SK 50) - Huron Universal milling head, automatic Positioning (A-/B-Axis each 0,001°) - Chip conveyor - OPTIONAL: Rotary Table 3000x3000mm - 30t (W-Axes: 2000mm), with independent FAGOR CNC Control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Zayer 30KCU700AR (2003) with Heidenhain iTNC 530. - x, y, z = 7000, 2000, 1250 - CTS 15 bar - Controlled milling head (position accuracy 0.001) - 60 tools - 37 kW spindle motor - Rapid traverse 20/10 m/min - 4500 rpm - ISO50 - Renishaw RPM60 -Conveyor - Additional milling head (replacement)
Excavators, track widening for excavators, wheel spacers -Manufacturer: Eurorubber, track widening for excavators -Part No.: ZR804550 -Material: Rubber -Dimensions: see photos / technical drawing -Suitable for various excavator models -Dimensions: Ø 820 x 65 mm -Weight: 31 kg
From a current recycling we offer you a Holmer implement carrier + slurry technology + beet bunker Terra Variant 585 plus attachments. Year of manufacture: Holmer implement carrier + Zunhammer slurry technology 2019, beet basket 2024 First registration: / Condition: used Hours: approx. 8,459 Asking price: 295.000,00 Euro VHB Original price: 425.000,00 Euro Equipment / accessories / other information: Property will be converted to slurry at short notice Terra Variant 585 (BJ 2019), Slurry technology Zunhammer 21 m³ & Vogesang (BJ 2019), Overload bunker RB 35 (BJ 2024) Asset Manager: Klaudius Giolbas Phone: 0202 257273151 Mail: k.giolbasakf.de We will be happy to provide you with details upon request. Location: 24983 Handewitt The sale is without warranty Subject to prior sale
Lock, cabinet lock, latch, switch cabinet lock, bolt lock, latch latch, holding lock -Manufacturer: Dirak, quick-release latch with lock, unused -Type: ZL0410 -Number: 16 locks available -Price: per piece -Dimensions: 88/80/30 mm -Weight: 0.6 kg/pc.
approx. 10 pieces spring floor trolley, Zarges, 195 L – used - : Price per unit: 495.-€ (net), ex location! Minimum order 5 pieces! Manufacturer: Zarges Type: 40645, Suspension Floor Trolley W 161 Year of manufacture: unknown With push bar Item no. Inner Length (approx. mm) Inner width (approx. mm) Inner height (approx. mm) Outer Length (approx. mm) Outer width (approx. mm) Outer height (approx. mm) Set for payload (kg) Volume (liters) Weight (kg) 40645 1010 420 460 1060 470 800 30 195 21,0 equipped with 4 swivel castors in corner arrangement. Original price: approx. 1.500.-€ Condition: good Available: immediately Location: Attenweiler
diameter: / mm Cutting (quantity): / 0 weight: / kg Type: MFE 5/BW 16 05/0.6 l/min P-max: 20 bar Container capacity: 15 l 2 units available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 7000 mm y-travel: 2000 mm z-travel: 1250 mm control: Heidenhain iTNC 530 plate size: 7000 x 1500 mm tool change unit: 60 Pos turning speeds: 35 - 4500 U/min spindle motor: 37 kW rapid traverse: 20 / 10 m/min total power requirement: - kW weight of the machine ca.: - t required space: - m equipped with: - Heidenhain iTNC 530 CNC control - Tool changer for 60 tools (ISO 50) - autom. Milling head (0,001 °) - Spindle cooling 15bar with paper band filter - Chip conveyor - Renishaw RMP 60 - Extra Miling Head (Spare Part) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, PTC thermistor release device -Manufacturer: Ziehl, PTC relay, PTC release device -Type: MSR 220 KA -Item No.: T 222175 -Quantity: 1 piece available -Dimensions: 115/75/H25 mm -Weight: 0.1 kg
For sale is a Coljan labeler Model No.: ETM Year of Make: 2014 Printer Manufacturer: Zebra Type: ZE500-4 Control: Siemens Condition: good For sale is a Coljan labeler Model: ETM. Year of manufacture: 2014 Printer manufacturer: Zebra Type: ZE500-4 Control: Siemens. Condition: good
Tachometer, cutting speed measuring device, revolution measuring device, economy panel meter, speed measuring device -Manufacturer: ifm, ecomat 200 speed monitor, unused, original packaging -Type:DI5003 DIA3010-ZPKG -Cardboard dimensions: 150/130/H35 mm -Weight: 0.3 kg
ZERMA PM 500 PVC PULVERIZER, average throughput rate 500 kg/h, Disc diameter: 500 mm, 24 kW drive, Total installed power: 79 kW (200 A), including metal detector, Vibrating screen, 2-place big bag filling station, Loading screw and cyclon, Centralized dust extraction system Donaldson TDS8 year 2018, N.2 new spare discs, Complete valve and piping system, Test possible, installed power - used power in work: about 60-65% : 79 kw, conditions: testable
Inv. Num. : 948 Type: LVH 2500 Producer: ŽĎAS Created: 1961 Parameters: Depth: 1800 mm Width: 3450 mm Height above ground: 4650 mm Weight: 85 000 kg Voltage: 220 / 380 V Mains frequency: 50 Hz Workforce: 2500 t Number of strokes: 20/min Height of the lifts: 500 mm Minimum plunger distance from the table: 900 mm Maximum plunger distance from the table: 1400 mm Table surface: 1050 x 1400 mm Plunger area: 1050 x 1200mm
Manufacturer ZAYER Model MEMPHIS 10.000-U Month/ Year Manufactured 2002 CNC HEIDENHAIN TNC-430M 9 AXIS Table Table dimensions 9,500 x 2,000 mm. Permissible Weight on Table 20,000 kg Number/Width/Distance T Slots 8/28/250 Tours Table longitudinal (X-axis) 10,011 mm. Ram transverse (Y-axis) 1,960 mm. Vertical (Z Axis) 1,112 mm. Width between uprights 2,850 mm. Distance from the table to the nose of the head axis 45º in vertical position 1,291 mm. Distance from the table to the nose of the head shaft 45º in horizontal position 1,365 mm. Progress Working (X/Y/Z) 20,000 mm/min. Fast X-Y-Z Axis 30,000 mm/min. Head Automatic Type 45º Head positions 360.0000 x 0.001º Cone DIN 69871 AD 50 Maximum rotation speed 6,000 r.p.m. Main engine power 37 kW Automatic tool changer AITEK Manufacturer Type Horizontal/Vertical Tool Magazine Positions 100 ISO 7388-2 B50 Tool ...
For Sale: ZAGRO Wagon Loading Ramp (Made in Germany) Heavy-duty ZAGRO Wagon Loading Ramp in good used condition, ideal for railway workshops, industrial plants, logistics terminals, and heavy equipment handling. Specifications: Manufacturer: ZAGRO Bahn- u. Baumaschinen GmbH Model: Wagon Loading Ramp WGR- N Year of Manufacture: 1999 Payload Capacity: 14,000 kg Dead Weight: Approx. 1,400 kg Made in Germany Features: Robust all-steel construction Suitable for loading and unloading heavy equipment onto railway wagons (300 to) Durable industrial design for long service life Ready for inspection The ramp is being sold as seen in the photos. Viewing can be arranged by appointment in Heinsberg Price: On request (or best offer) For further information, additional photos, or to arrange an inspection, please get in touch
A Zeibig dough mixer overhauled in 2024 is available. Bowls: 2, Capacity: 160kg, Bowl rotation: positive drive. An on-site inspection is possible.
workpiece diameter: 50 mm threading length: 100 mm thread pitch: mm total power requirement: 1 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
