z blade used for sale

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, live center -Type: ZNB 204 -Recording: MK4 -Dimensions: Ø 100 x 215 mm -Weight: 3.5 kg

Atlas Copco ZT30 Air compressor Serial: AIF065086 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank

MAX DIAM 250 MAX LENGHT 800

Manufacturer: Ziersch Model: ZT 820 Year of Manufacture: 2008 Type of Machine: Grinding Machine Certification: CE Marked Find more here - / Contact us at -

Urban 4 m bed milling machine SK40 against bid. Slightly used, was only rarely used! In February 2023, the machine was set up and put into operation by the company Urban and has only very few operating hours. As an accessory, the machine has a pick-up station including angular head drive. Bids from the Dossenheim location.

Key data: 140 mm, 280 mm

Zimas D290V - Lathe Special price € 2,800 instead of € 3,490 excl. VAT - 2-axis position indicator - Stepless speed adjustment with digital display - Plan feed - Camlock mount C4 - Upper slide can be rotated 360° - Tailstock adjustment +/- 5 mm for taper turning Accessories - Undermount with 1x door & 3x drawer - Three-jaw chuck 160 mm with interchangeable jaws - Fixed bezel - Centering tip - Operating tools Specifications Range: - Circumferential Ø over bed: 290 mm - Circulating Ø over cross slide: 180 mm - Turning length between tips: 700 mm - Bed width: 182 mm Headstock: - Spindle bore: 38 mm - Spindle nose: MK5 - Speed levels: infinitely variable - Speed range: 80 - 2000 rpm Feed: - Metric threads: 0.2 - 3.5 mm / 18 steps - Inch thread: 8 - 56 dpi / 21 levels - Longitudinal feed: 0.085 - 0.832 mm - Transverse feed: 0.01 - 0.10 mm Sleds a ...

gear, gears, gear shaft, pinion shaft -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 42 mm / 14 teeth -Tooth width: 83 mm -Dimensions: see photo technical drawing -Number: 9x gear shaft available -Price: per piece -Total dimensions: Ø 42 x 220 mm -Weight: 0.9 kg/piece

Manufacturer: GROSS Model : Z7400 Year of Manufacture: 2001 Type of Machine: Briquetting machine Power Output: 7.5 kW Nominal Voltage: 400 V Rated Current: 30 A Control Voltage: 30/24/211 V Fuse Protection: 10 A Hydraulic Operating Pressure: 280 bar Frequency: 50 Hz Operating hours are estimated at less than 100 hours and it also includes an unused 10,000 l oil tank. Find more here - / Contact us at -

Screwed plate heat exchanger 300 KW, 60 sqm heat exchanger area

dividing head, dividing head, gear, gears, lathe -Gears: 4 pieces -Teeth: 58/54/36/34 -Tooth width: 18 mm -Shaft mount: Ø 26 mm -Dimensions: see photo parts list -Shipping/Price: complete -Total dimensions: Ø 90 x 43 mm -Weight: 1.0 kg

dividing head, dividing head, gear, gears, lathe -Gears: 3 pieces module 1.5 -Teeth: 91/60/48 -Tooth width: 9 mm -Shaft mount: Ø 26 mm -Dimensions: see photos -Shipping/Price: complete -Dimensions: Ø 140/93/ 75 mm -Weight: 0.5 kg/total

Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Sendzimir, completely revamped by IS2 Type: ZR23-25 Built: No information! Completely rebuilt: 2000 Stopped: 09/2022, still under power Strip width: 280 – 625 mm Thickness: Entry: 3.5 mm Exit: 0.05 mm Speed: 1st gear: 0 – 165 m/min. 2nd gear: 0 – 280 m/min. PLC GE FANUC – IC697CPX782

x-travel: 1700 mm y-travel: 800 mm z-travel: 890 mm table surface area: 2000 x 630 mm spindle taper: SK 50 spindle turning speed range: 35 - 3000 U/min spindle drive: 26 kW feeds longditudinal/cross/vertical: 6 - 5000 mm/min rapid traverse: 15 m/min table load: max. 6000 kg control: HEIDENHAIN control: TNC 360 total power requirement: 45 kVA weight of the machine ca.: 13 t dimensions of machine L x W x H: 5,2 x 2,78 x 2,95 m Accessories: vertical head swivelling in 2 planes with hydr. tool clamping, various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dividing head, dividing head, gear, gears, lathe -Gears: 3 pieces module 1.5 -Teeth: 48/45/38 teeth -Tooth width: 16 mm -Shaft mount: Ø 28/24 mm -Dimensions: see photo parts list -Shipping/Price: complete -Dimensions: Ø 75/70/60 mm -Weight: 1.1 kg/total

gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 67 mm / 30 teeth -Shaft mount: inner Ø 36 mm -Dimensions: see photo technical drawing -Quantity: 1x gear shaft available Total dimensions: Ø 67 x 45 mm -Weight: 0.4 kg

grinding length: 600 mm grinding width: 250 mm workpiece height: ca. 385 mm table surface area: 600 x 200 mm table speed -stepless-: 2 - 35 m/min table load capacity: max. 250 kg grinding wheel size: ø 225 x 25 mm grinding wheel hole diameter: 50,8 mm vertical feed autom.: 0,001 - 0,099 mm rapid traverse vertical: 600 mm/min cross feed of table continual: 10 - 1000 mm/min rapid traverse cross: 1000 mm/min total power requirement: 6 kVA dimensions of machine L x W x H: 2,65 x 1,70 x 2,28 m Accessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with paper band filter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 10 min. module: 1 workpiece dia. over saddle: 250 mm spindle bore of workspindle: 102 mm quill stroke: 100 mm workpiece turning speeds: 0,0032 - 2,6 U/min feeds - rolls: 0,027 - 5,66 mm/WU feeds - longitudinal: 0,3 - 198 mm/min main drive: 4 kW swivel angle for work spindle: 90/120 ° diameter of hob: 150 mm milling width: 100 mm hob turning speeds: 45 - 560/900 U/min total power requirement: 9,5 kW weight of the machine ca.: 4,2 t Machine equiped with: - Heavy Duty Hob Head ApFw - change gears - Milling Head ApFF - Single Indexing Device ETE - Bush Rest - Coolant Tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3500 mm turning diameter: 4000 mm centre distance: 16000 mm turning speeds: 0,71-33,5 U/min Rest: 2 tailstock quill taper MT: max. workpiece weight -without tailstock: 6300 kg max. workpiece weight between centres: 18000 kg Plate area: mm total power requirement: 31 kW weight of the machine ca.: 60 t dimensions of the machine ca.: 22x5x4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cylindrical cone fermenting tanks with capacity of 2x 625 ltr. + 120 ltr made by Speidel in 2021 & 2022. Tanks are self-standing on three legs and are made entirely of stainless steel. These tanks have a double welded jacket for cooling with two connection nozzles. They are suitable for fermenting and preserving beer, cider wine or for storing juice. Manufacturer Speidel Tank- und Behälterbau GmbH Manufacturers type FD-ZKG 120 ltr & 625 ltr Manufacturing year 2021 & 2022 Capacity 2 x 625 ltr + 120 lt Application fermenting & storage Number of tanks 2 x 1 Type Vertical indoor Diameter and height120ltr 550 x 1225 mm Diameter and height625ltr 820 x 2044 mm

Maximum length of the piece: 1100 mm, Minimum length of the piece: 50 mm, Maximum diameter of the piece: 125 mm, Minimum diameter of the piece: 8 mm, Center height of tailstock above guide: 145 mm, Center height of tailstock above carriage: 65 mm, Centering hole taper angle: 60°, Larger diameter of centering hole cone: 50 mm, Diameter of smallest centering hole: 2 mm, Grinding spindle speeds: 45000 / 22 500 / 13 000 rpm, Hollow screw speed: 400 rpm, Stroke of the grinding wheel along the grinding surface: 0.75 - 5 mm, Diameter of grinding wheels: 15, 27, 48 mm, Weight approx.: 460 kg, Dimensions (length x width x height): 850 x 750 x 1850 mm

dividing head, dividing head, gear, gears, lathe -Gear: 87 teeth module 1.5 -Tooth width: 17 mm -Shaft mount: Ø 28/23 mm -Dimensions: see photo parts list -Number: 4x gear available -Price: per piece -Dimensions: Ø 134 x 17 mm -Weight: 0.3 kg/piece.

MODUL ZFWZ 3150/3 Gear hobbing machine max. wheel dia. 3150 mm min. wheel dia. 500 mm max. wheel diameter with outboard-support 1600 mm max. module 30 mm gear width 1000 mm max. helical angle 45 deg tangential adjustment 500 mm cutter length max. 440 mm diameter of cutter (hob) 350 mm table diameter 2400 mm table bore diameter 500 mm depth of hole 1100 m table load max. 30 t Accessories Dimnsions 6700x5400x4800 mm Weight 65000 kg

dividing head, dividing head, gear, gears, lathe -Gear: 87 teeth module 1.5 -Tooth width: 14 mm -Shaft mount: Ø 28/23 mm -Dimensions: see photo parts list -Number: 2x gear available -Price: per piece -Dimensions: Ø 134 x 17 mm -Weight: 0.3 kg/piece.

Flame cutting machine, torch, oxy-fuel cutting machine, cutting torch, welding torch, hand cutting torch, welding set -Manufacturer: Zinser, Burner set in a metal box -Burner sizes: No. 00 to No. 4 (max. 9 mm) -Cutting torch: A -Accessories: see pictures -Dimensions case: 320/200/H65 mm -Weight: 2.8 kg

max. wheel diameter: 400 mm gear width: 275 mm max. module: 6 Overall size: 300x330x245 cm weight of the machine ca.: 5,5 t dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min Specification: Max wheel diameter: 400 mm Min module: 1 Max module: 6 Table diameter: 370 mm Max wheel diameter: -With counterstay: 340 mm -Without counterstay: 400 mm Max axial offset: 275 mm Max tangential adjustment: 100 mm Tooth helical angle: 45 degrees Max cutter diameter: 145 mm Max hobbing length: 170 mm Hob turning speeds capacity: 63-180 U/min Feeds infinitely variable axial: 0,2-10 mm/U Feeds infinitely variable tangential: 0,1-5 mm/U Radial for spur gears: 0,1-4 mm/U Radial for worm gears: 0,025-1 mm/U Rapid traverse axial: 500 mm/min Rapid traverse tangential: 250 mm/min Radial for spur gears: 400 mm/U Radial for worm gears: 100 mm/U Motor power: 7.4 kW The data for t ...

Measuring range X,Y,Z 1200,1800,1000 mm Software calypso Measuring head 5 axis Vast XXT

Key data: 160 , 8 , 1170

For sale is an Atlas Copco compressor 160KW Ser. No. AIF001037

Electric motor, three-phase motor -Manufacturer: Wolf, electric motor type 1LA766-4AA60-ZN00 160L -Power: 15 kW -Speed: 1460 rpm -Shaft: Ø 42 x 110 mm -Design: B3 -Protection class: IP 55 -Dimensions: 590/315/H360 mm -Weight: 83 kg

Cardan shaft, cardan shaft, cardan joint shaft, drive shaft -PTO adapter: unfortunately without exact type designation -Art.No.: 11.059359 -PTO shaft: Ø 47.5 mm -Dimensions: see photos -Number: 2x shaft available -Price: per piece -Total dimensions: Ø 68 x 455 mm -Weight: 4.7 kg/piece.

Key data: 250 , 8 , 2322

For sale is an Atlas Copco ZR4 compressor Year of manufacture 1993 Bh. 98485 250KW Volume 1400-2322 m3/h Weight 4100kg

Technical specification, ZZS A1, FEATURE VALUE, POWER 17 KW, LENGTH 2000mm, WIDTH 1250mm, HEIGHT 4180mm, WEIGHT 700kg, zigzag separator, The Zig Zag Separator works based on weight differences. This highly efficient separator uses airflow to separate materials by weight. The zigzag design extends the falling path of the materials, providing a more homogeneous and accurate separation process. It is ideal for separating materials such as plastics and light metals from scrap metal. Our machine is designed to be integrated into production lines and offers maximum performance with low energy consumption. In addition, its compact design allows it to operate in a minimal space. The Zig Zag Separator offers an environmentally friendly solution with high efficiency and low running costs that optimizes your recycling process.

table length: 2000 mm table width: 1000 mm stroke height: 400 - 1010 mm weight max. in kg: 300 kg weight of the machine ca.: 220 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear, gears, gear shaft, pinion shaft, spur gear, spur gear, hollow ground gear -Gear: spur gear with hollow ground 63 teeth -Shaft holder: inner Ø 40 x 45 mm -Dimensions: see photos -Dimensions total: Ø 134 x 60 mm -Weight: 1.8 kg

C - bow is in good technical and optical condition

C-bow in very good technical and optical condition

ELECTRICAL SPECIFICATIONS   total power consumption: 57 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4900 mm   space requirements -front/back-: 2600 mm   total height: 2600 mm   total weight approx.: 2600 kg Washing medium: solvent-free basket/rack size     790 x  590 x  600 mm cabin dimensions    1200 x 1200 x 1200 mm useable volume       800 x  780 x  900 mm net weight of batch            ;     200 kg Attachments: Dosing unit DOSANTEC A763-168M buffer tank 100 ltr Waste water tank 75 ltr rotating spraying cross from top rotating spraying cross from bottom Drying device  ...

dividing head, dividing head, gear, gears, lathe -Gear: 70 teeth module 1.5 -Tooth width: 12 mm -Shaft mount: Ø 20 mm -Dimensions: see photo parts list -Quantity: 1x gear available -Dimensions: Ø 108 x 12 mm -Weight: 0.5 kg.

Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 1 x 17.02 mm 57 teeth -Diameter: 475 mm -Shaft holder: inner Ø 90 x 90 mm -Dimensions: see photos -Quantity: 1x piece available -Dimensions total: Ø 475 x 90 mm -Weight: 62 kg

Press capacity: 315 ton Ram stroke adjustable: 30 - 100 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Table surface area : 1600 x 1100 mm Slide area: 1600 x 1100 mm Hole in table: 600 x 180 mm Number of strokes: 15 - 180 s.p.m. Table height over floor: 1200 mm Required power: 170 kW Height over floor approx.: 4900 mm Dimensions L x W x H: 4900 x 1900 x 4900 mm Weight of machine approx.: 55 ton

description: Vertical stroke of approx. 2000 mm incl. Vacuum pump and intermediate layer magazine for EURO and half pallets height: 3000 mm length: 1520 mm serial number: 2080467/017 width: 1120 mm Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for o ...

Decanter Z4E-4/454 made of stainless steel by FLOTTWEG in 2004. Material Stainless steel Technical features Model Z4E-4/454 Year of manufacture 2004 Maximum speed 4200 rpm Maximum sediment density 1.4 g/cm³ Working temperature 0/100 ºC Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG

Decanter Z53-4/454 manufactured in stainless steel by FLOTTWEG in 2003. Technical features Model Z53-4/454 Year of manufacture 2003 Maximum speed 3250 rpm Maximum sediment density 1.3 g/cm³ Drum inner diameter 529 Discharge diameter 315 mm Seal material NBR Working temperature 0/100 ºC Drum motor 63 kW mm Screw motor 15 kW Equipment configuration Electrical panels Hydraulic power pack Slide gates Transport information Weight 5300 Kg Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG

Manufacturer: Gabelsatpler Zinken Neu, FREETEXT1: Länge 1300 mm, FREETEXT2: breite 120 mm, FREETEXT3: 520 mm Höhe <CRLF>Einschub,

Manufacturer: Weger Zuluftgerät, Type: ZL 2113, Year: 2013, Control: no, Kw output: 22, Heizmedium : Warmwasser, Temperatur vor-rücklauf: 70/90, Taschenfilter Typ: yes, Fresh air m³/h: 42000, Fresh air m³/h: 42000, Year :2013

Manufacturer: Weger Zuluftgerät, Type: ZL 30 S, Year: 2013, Control: no, Zuluftleistung m³/h: 6000, Kw output: 2,2, Heizmedium : Warmwasser , Temperatur vor-rücklauf: 90-70, Taschenfilter Typ: yes, Pumps: no, Year :2013

Manufacturer: Pilz Zentraleinheit C-P8-ZE-32, Type: 32 K, Model: 306097,

Fan filter, fan array, air cooler, control cabinet fan, filter fan, cabinet cooler, axial fan -Manufacturer: Shen Zhen, axial fan type FP-20060EX S1-B -Voltage: 220-240 V / 65 W -Number: 5 fans available -Price: per piece -Dimensions: 200/200/H60 mm -Weight: 1.4 kg

Crane fork, loading fork, load fork, pallet fork, pallet crane fork, lifting equipment, roller lifter -Crane fork: with adjustable weight compensation -Type: Hoist 630x475 -Load capacity: 250 kg -Tin length: 490 mm -Usable height: 610 mm -Dimensions: 635/520/H795 mm -Weight: 21 kg

Reciprocating saw, dovetail saw, tiger saw, saber saw -Manufacturer: Flex, reciprocating saw with carrying case -Type: SK ZSK 602 E -Nominal power input: 1000 W -Stroke rate: 700 - 2400 /min -Dimensions: 620/260/H110 mm -Weight: 8.6 kg

tapered roller bearings -Weight: 3780 g -Outer diameter: 180 mm -Width: 34 mm -Inner diameter: 100 mm