129,243 used machines on RESALE, but how to find them? Machine Search
Key data: 1600 mm, 3500 mm, 800 mm
For sale is: 1 Piece Used Face and Lace Lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Type: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Largest turning diameter over bed: 1,600mm Center width: 3,500mm Spindle bore: 100mm Face plate diameter: 1,250mm Total mass of the machine: approx. 24.8t incl. documentation Further pictures and videos can be sent on request. The following things have been renewed/repaired on the machine in the last four years: At the end of 2022, the tailstock was completely overhauled. New bearing and new tip and lubrication. 2024 Cross Support regenerated. Refurbishment of the wedge strips with new sliding coating, snatchers on the guideways smoothed by scraping, Bearing seats of the spindles made smooth, wedge strips in the contact surface and covering surface scraped. Lubrication pump cle ...
: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 95 mm Shaft diameter: 30 mm Shaft revolutions: 7 U/min roll diameter: 132 mm Drive: 0,75 kW weight: 220 kg range L-W-H: 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 80 mm roll diameter: 260 mm : 7 U/min : 170 mm : 27 kN : 160 mm : 450 mm total power requirement: 3,7 kW dimensions: 980x1430x1600 mm weight: 1380 kg Accessories / equipment: - Three driven rollers with a smooth surface - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can bend different profiles are used e.g. Flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding band dimension: 150 x 2000 mm band speed: 33 m/sec weight of the machine ca.: 105 kg engine output: 4 kW turning speeds: 2800 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 2000 mm band length: 75 mm band speed: 16,5/33 m/s turning speeds: 1400/2800 U/min weight of the machine ca.: 75 kg Volume: 83 dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 50 mm : 8,5 U/min : 100 kN roll diameter: 162 mm Drive: 1,5 kW range L-W-H: 1100x850x1350 mm weight: 495 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding band dimension: 150 x 2000 mm band speed: 33 m/sek. total power requirement: 3 kW weight of the machine ca.: 95 kg turning speeds: 2800 U/min Standard equipment: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
band speed: 33 m/s grinding band dimension: 75 x 2000 mm total power requirement: 3 kW weight of the machine ca.: 75 kg turning speeds: 2800 U/min Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mm band length: 2000 mm band speed: 16,5/33 m/sec total power requirement: 2,6/3,37 kW turning speeds: 1400/2800 U/min weight of the machine ca.: 95 kg Equipment / Accessories: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW range L-W-H: 900 x 600 x 1000 mm weight: 470 kg connected load: 400/50 V/Hz Equipment / Accessories: - Three driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
shaft diameter: 60 mm Shaft revolutions: 6 U/min roll diameter: 215 mm pressure hydraulic cylinder: 180 kN dimensions: 1125x870x1620 mm weight: 820 kg Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 32 bore stroke: 125 mm Short spindle: MK 3 throat: 210 mm Machine table - usable table surface: 390x390 mm table load: 65 kg spindle turning speed range: 150-2.500 UpM Power requirement: 16 A total power requirement: 1,5 kW Overall size: 750x450x1745 mm weight of the machine ca.: 187 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 25-138 m/min dimensions of saw-band: 1440x13x0,65 mm capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 125 mm capacity 90 degrees: flat: 150x125 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 50 mm capacity 45 degrees: flat: 70x50 mm weight of the machine ca.: 35 kg Standard features: - right and left miter - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 23 thread capacity: M10 bore stroke: 90 mm Short spindle: MK2 throat: 180 mm Machine table - usable table surface: 285x285 mm table load: 45 kg spindle turning speed range: 150-1.250/350-3.000 UpM total power requirement: 0,75 kW Overall size: 735x470x1080 mm weight of the machine ca.: 106 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sanding belt width: 150 mm sanding belt length: 2000 mm band speed: 16,5/33 m/sec engine output: 2,6/3,37 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 50 mm : 8,5 U/min : 100 kN roll diameter: 162 mm Drive: 1,5 kW weight: 495 kg range L-W-H: 1100x850x1100 mm Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 20 bore stroke: 80 mm Short spindle: MK2 throat: 180 mm Machine table - usable table surface: 285x285 mm table load: 45 kg spindle turning speed range: 210-2.500 UpM total power requirement: 0,38 kW Overall size: 620x470x1050 mm weight of the machine ca.: 80 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 140x140 mm capacity 90 degrees: flat: 150x140 mm : 100 mm : 90x90 mm : 100x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 65x65 mm capacity 60 degrees: flat: 65x70 mm dimensions of saw-band: 1735x13x0,65 mm cutting speed: 30-80 m/min engine output: 1,5 kW : 150 mm weight of the machine ca.: 37 kg dimensions of the machine ca.: 900x460x500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 215 mm shaft diameter: 60 mm Shaft revolutions: 6 U/min : 100x2 mm : 80x15 mm pressure hydraulic cylinder: 180 kN total power requirement: 2,2 kW weight: 720 kg dimensions: 1200x900x1700 mm Accessories / Equipment: - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sanding belt width: 150 mm sanding belt length: 2000 mm band speed: 33 m/sec engine output: 3 kW Motor speed: 2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 25-138 m/min dimensions of saw-band: 1440x13x0,65 mm capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 125 mm capacity 90 degrees: flat: 150x125 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 50 mm capacity 45 degrees: flat: 70x50 mm weight of the machine ca.: 35 kg Standard features: - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 200 kN stroke length max.: 200 mm working feed: 10 mm/sec return speed: 20 mm/sec : 480x1060 mm work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 2,2 kW : 200x12 mm bending capacity max. - round: 48x4,0 mm weight: 500 kg Overall size: 1010x480x1120 mm Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm - Quick change monometer 85 °, H = 200 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 165 x 210 mm : 195 mm : 185 x 185 mm : 130 x 190 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 85 x 85 mm capacity 60 degrees: flat: 85 x 120 mm : 170 mm : 145 x 145 mm : 60 x 195 mm cutting speed: 20 - 85 m/min dimensions of saw-band: 2725 x 27 x 0,9 mm : 315 mm work height max.: 900 mm Motor output: 1,2 kW Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 230 V sawband speed: 30-75 m/min. : 230 mm total power requirement: 2,35 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech ...
grinding band dimension: 150 x 2000 mm band speed: 16,5/33 m/sec engine output: 3,4/4,5 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
measuring range X-axis: 540 mm measuring range Z-axis: 400 mm table diameter: 740 mm enlargement: 20fach range L-W-H: ca. 1,70 x 1,00 x 1,70 mm weight: ca. 600 kg acc.: DRO on 2 axis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
screw ø:: für Extruder 90 mm screw length:: -- screw speedl:: -- U/min drive power:: 13,6 kW Condition: little used, as good as new Specification: gear pump ZP 75/50 for extruder size 90 - SEW helical gear units: R 97 - Siemens direct current motor: 1 GG5 118 - Drive power: 13.6 kW, 57 A - curved tooth coupling - With clamp for the head connection, - Clamping flange for extruder and head connection, - Base plate with linear guide rails, - Tooth shaft diameter: 75 mm - tooth width: 50 mm - helical gearing, hardened steel bearings, right-hand drive - without control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 4700 mm y-travel: 1000 mm z-travel: 1000 mm control: HEIDENHAIN TNC355 table-size: 5000x1000 mm T-slots: 7x mm turning speed range: 2800 U/min feed: 6-5000 mm/min rapid traverse: 15000 mm/min spindle motor: 30,00 kW spindle taper: SK 50 Table load: 10.000 kg Main drive: 40 PS weight of the machine ca.: 27,00 t dimensions of the machine ca.: m With HEIDENHAIN TNC 355 control. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 1 weight: 2,57 kg width: 265 mm height: 250 mm clamping force max.: 3 kN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 550 mm y-travel: 1200 mm z-travel: 450 mm control: 85er 8bit total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: - mm table width: - mm grinding wheel diameter: 400 mm max. width of grinding wheel: 50 mm total power requirement: 1,5 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1 x 1 x 1 m For Pre-Dressing the Gear Grinding Wheels apart from the machine, particularly to profile grinding wheels for two-flank grinding, module 12 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3.400 mm y-travel: 1.250 mm z-travel: 2.000 mm Control: TNC-430PA table-size: 4.700 X 1.200 mm V- travel: 500 tool taper: ISO 50 milling head -swivable: 0.001º/0.001º Grad main drive: 37 kW Chip coveyor: inkl handwheel: HR-410 Tools changer: 60 pos. milling head: Automatic Head 45º weight of the machine ca.: 35 t - Automatic Head 45º INCLUDED - Automatic Head 45º 0.001º/0.001º - Head 45º Max. Speed 3.000 rpm - 45º Head Taper ISO-50 - Twist Head Contiuous INCLUDED - Twist Head Max Speed 3.000 rpm - Twist Head Taper ISO-50 - Ram with Quill - Quill Diameter 150 mm. - Quill Taper ISO-50 - Pick up station AITEK for 45º and Twist Heads - Rotary Table ZEATZ Ø 1200 INCLUDED - RENISHAW MP 16+SP2/1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 22.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: SIEMENS 840 D milling head -swivable: 0,001/0,001 Grad milling head: Universalfräskopf 45° Internal cooling system: 20 bar Chip coveyor: ja Tools changer: 30 pos. coolant: 1.100 l Tool taper: DIN 69871A ISO 50 total power requirement: 45 kW weight of the machine ca.: 68 t The round table shown in the pictures as well as the plate field are not sold with ! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /IN ...
x-travel: 6000 mm y-travel: 2000 mm z-travel: 3000 mm Control: heidenhain TNC 415 total power requirement: 34 kW weight of the machine ca.: 31 t dimensions of the machine ca.: 7000 mm m Stocknumber 1110055 Type of machine CNC Floortype milling machine Make ZAYER Type KCU6000 Build in 1992 Type of control Heidenhain TNC 415 X-stroke (mm) 6.000 Y-stroke (mm) 2.000 Z-stroke (mm) 3.000 Speeds (Rpm) 20 - 1.800 Admission in spindlehead BT50 Feeds X (mm/R) 5 - 5000 mm/min Feeds Y (mm/R) 5- 5000 mm/min. Feeds Z (mm/R) 5- 5000 mm/min. Rapid feeds 10.000 mm/min. Total Power (KW) 34 Lenght (mm) 11.000 Width (mm) 2.500 Height (mm) 7.000 Weight 31.000 Kg Additional information Juaristi MG6 turntable: 1500 x 1200 mm Cooling system: 2.5 Bar Tool cooling: 15 Bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control unit, control panel, control panel, control unit, keyboard, screen, control, two-hand control panel -Two-hand control panel: from a press brake Atlantic HPT 13536 -Foot switch: Bernstein Classic -Dimensions: 920/1010/H1100 mm -Weight: 25 kg
- Hand & foot control - integrated ambos - solid substructure Specifications: - Hammer weight: 40 kg - Lifting height: 230 mm - Projection: 240 mm - Cylinder Ø: 140 mm - Motor power: 4 kW - Voltage: 400 V - Dimensions WxHxD: 700 x 1900 x 1200 mm - Weight: approx. 900 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams, compact cylinders -Pneumatic cylinder: ZIDP 200/100 -Stroke: 100 mm -Piston diameter: 200 mm -Piston rod: Ø 40 mm -Dimensions: 220/220/H450 mm -Weight: 23.5 kg
- 3-cheek lining - 4-cheek lining - fixed bezel - running bezel - 3-axis position display Sino SDS6-3V - Multifix Type E incl. 4 holders - Splash guard - Oil pan - Lighting system - Foot spindle brake - Coolant sealing - Steel stand with 3 drawers and cabinet door - Reduction sleeve - Spare gears Technical data: - Circulating Ø over bed: 360 mm - Circulation Ø over slide: 212 mm Ø without bridge: 490 mm - Center width: 1000 mm - Bed width: 187 mm - Spindle bore: 51 mm - Metric threads: 0.2 - 5 mm (28 steps) - Inch thread: 8 - 112 tpi (36 steps) - Module thread: 0.2 - 3 mm (22 steps) - Thread with diametrical slope: 8 - 112 dp (36 steps) - Longitudinal feed: 0.050 - 0.696 MM (36 steps) - Transverse feed: 0.013 - 0.188 mm (36 steps) - Tailstock Pinoleenaufnahme: MK3 - Tailstock Pinoleenhub: 100 mm - Motor power: 1.5 kW - Dimensions WxHxD: 1925 x 1510 x 75 ...
roll diameter: 76-86 mm Shaft diameter: 20 mm Shaft revolutions: 11 U/min Bending capacity round tube: 30 mm : 25x6 mm Angle iron: 20x20x4 mm Drive: 0,18 kW range L-W-H: 530x420x500 mm weight: 80 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grinding range: 400 x 200 mm Magnet table: 400 x 175 mm Height adjustment: 410 mm Grinding wheel dimensions: 225 x 25 x 50.8 mm Grinding wheel speed: 1420 / 2840 rpm. Equipped with: - Coolant device - Band filter - Hydraulic system - Operating instructions Country of origin: Germany Motor power: 1.5 kW Machine LxWxH: 2200 x 1500 x 2100 mm Machine Weight: 1100 kg
Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Shaft coupling for: splined shaft -Shaft: Ø 40/36 mm, Ø 30/27 mm -Price: per piece -Number: 6 pieces -Dimension: Ø 140 x 105 mm -Weight: 5.8 kg/piece
Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Shaft coupling for: splined shaft -Shaft: Ø 25/22 mm, Ø 20/17 mm -Price: per piece -Number: 3 pieces -Dimension: Ø 105 x 76 mm -Weight: 1.9 kg/piece
- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Flat disc ø 430 mm - Lighting system - Coolant sealing Specification - Tip width: 2000 mm - Circulating Ø over bed: 600 mm - Circulation Ø over slide: 360 mm - Circulating Ø in eruption: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/U (66 steps) - Transverse feed: 0.036 - 2.019 mm/U (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock ...
maximum number of results exceeded
please refine your search
