year 2014 used for sale

Robot Kuka KR6-2 construction year 2001 reach 1500 mms weight 220 kg load 6 kg control KRC1 weight 136 kg software state V2.3.24 Kuka KCP1 connecting pipelines 7 m .

Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Year: Mar 1972, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.

Year: 1989 Type: Monoblok VKVCF 72/12 Bottle type: 0,5l glass Efficiency: 28500 b/h Operation mode: pressure Technical data: -72 filling valves -12 crowning heads -double evacuation -vaccum pump

Type; AUMA 15SN X 1600 Manufacturer: Berstorff, Germany Year of manufacture: 1998 Technical Specification: Working width: 1600 mm Steel belt width: 1750 mm Steel belt thickness: 1,8 mm Steel belt length: 15600 mm Rolls width: 1950 mm Center distance between frames: 2330 mm Heating roll diameter: 1500 mm Stretch rolls (I, II, III) diameter - 1000 mm Vulcanizing time: 1?30 min Working speed: 7?.210 m/h Max steam pressure in heating roll: 13 bar Max steam pressure in lower stretch roll: 8 bar Surface temperature of: Heating roll: ca. 195oC Lower stretch roll: ca. 175oC Pressure in heating zone between steel belt and rubber: 60 N/cm2 Main motor speed: 1 450 min-1 Drive position: Left from inlet Paint: RAL 6011 Air supply: 6 bar Cooling water supply: + 25oC Max hydraulic pressure Belt pressure tension: 250 bar Belt pressure regulation: ...

1 x Farrel Bridge model 11D Banbury internal mixer, machine number: 90R2022, Year: July 1991, Pneumatic hopper + extension neck, SSA dust seals, 2 wing rotors, Hydraulic drop door with Linear actuator, Wyco semi unidrive gearbox, with 875Kw, 440V AC variable speed motor with Alston syncdrive controls. In good condition.

Tetra Pak (opt.WRAP AROUND) Tray Packer TCBP 70, year 2000.The TCBP 70 Packer is available as Multi-Infeed , MED, in various Volumes available at our warehouse. Nominal capacity 7000 p/h

SOMOS plastic dry-air-dryer for D200 with voltage regulator 230V Dry air flow rate: 200 m3/h Heating capacity dry air: 8.1 kW Regeneration heating capacity: 8.1 kW Drive capacity: 0.9 kW Connected Waterberg days: 17.1 kW Completely overhauled with 1 year guarantee Drying hopper, vacuum conveying system and package spare parts can be offered on demand.

Choice of 3 x RENTEC n.v. (Belgium) steam heated autoclaves Internal dimensions: 3000mm dia x approx 2500mm long (inc. dished end and door), Working pressure 10 Bar, Hydraulic Bayonet type door Year of manufacture 1995 Drawings and documentation available. No controls or hydraulic unit for door (all 3 were running off 1 pump). In very good condition.

Producer: Krones construction year: In 1997 type: Linatronic achievement: 36000 b/h Kontrole: -lye - mouth - side wall - ground

The company Centrimax - Winkelhorst Trenntechnik GmbH is specialized for over 30 years on the delivery of used decanter centrifuges of the makes Flottweg, GEA Westfalia Separator and Alfa Laval. The decanter centrifuges are delivered by us fully reconditioned and with warranty. 2-phase decanters and 3-phase decanters (tricanters) as well as sedicanters count to our big stock of more than 100 decanter centrifuges for the clarification and the separation of suspension and liquid mixtures, as well as for the thickening and concentration of sludges. Ask us if you search consultation in the solution of problems in the area of the centrifugal separation technology. Buy from the specialist!

Type of machine: KM 200-1400 C2 Year of construction: 2000 Shipping time: Immediately Cargo base: From site Control type: MC4 Screen text: German Hours of operation: 57000 h Price: On request Technical details Clamping unit Clamping force: 2000 kN Tool opening force, Max: 101 kN Driving force open movable plate: 50 kN Driving force close moving plate: 42 kN Mounting plate (h x v): 915 mm x 915 mm Clear width (h x v): 560 mm x 560 mm Tool unclamping stroke: 700 mm Min. mould installation height: 350 mm Opening width: 1050 mm Ejector stroke: 200 mm Ejector force forward/back: 58/28 kN Injection unit Screw diameter: 55 mm Ls/D ratio: 23 Injection pressure: 2380 bar Displacement: 570 cc : Shot weight PS 519 g Injection power: 713 CC/s Screw speed: 259 1/min Plasticizing power Max: 49 g / s Nozzle system power: 110 kN Electro-hydraulic equipment Pump motor power: 45 kW Installed power: 23 kW  ...

Demag hose pouring machine type: Ergotech 500-200 systems control: NC 4 construction year: In 1999 Schliesseinheit Schliesskraft t: 50 opening ways mm: 400 cross-beam measure mm: 355 installation heights min / max. mm: 210 record size: 520 x 520 hose unity snail diameter mm: 30 hose weights gr: 94 hose volumes cm?: 106 hose pressure cash: In 1995 mass and weights dimensions LxBxH m: 3.6 x 1.4 x 1.8 machine weight kg: 2900 other 1 x nuclear trains

Approx. 30lfm shelf system shepherd R3000 Manufacturer: Schäfer R3000 2014, as new, see pictures. Stand, galvanized, 2.5 m height, depth 60 cm Shelves, galvanized, 200 kg load/compartment, field width approx. 100 cm Negotiation price: € 2,230.00 net from stock Offer consists of: 31 pcs stand or frame, 2.5 m, galvanized 90 pcs trays, 200 kg load/compartment, galvanized 10 St. Cross Associations for Stiffening 3 levels per field (several are of course possible at an extra cost) Other compilations possible. Heights 2.3m, 2.5m or 3m available. Goods are in stock. Constantly over 3000 lfm pallet racks in stock by numerous manufacturers. Transport and assembly possible on request. More information on request. (changes and errors in the technical  ...

Demag hose pouring machine type: Ergotech per 80-400 controls: NC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 80 cross-beam measures mm: 400 installation height min / max. mm: 250 record sizes: 580 x 580 hose unity snail diameter mm: 40 hose weights gr: 205 hose volumes cm?: 217 mass and weights dimensions LxBxH m: 4.13 x 1.13 x 1.81 machine weights kg: 3800 other 1x nuclear train, new cylinder with snail

Hi here sell a Schmitt enertec BHKW which is immediately ready for use and for sale also can be tested Data: Motor you E2876 R6 210 KW generator LEROY SOMER year: 2006 Hours of operation: ca 11000 CHP is until was run very well to expand only expanded because some customers have not finished it to pay bills. If you have questions I am under to you available: Andreas.Peters89@gmx.de

Krauss Maffei hose pouring machine type: KM 110-700 C1 control: MC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 110 cross-beam measures mm: 470 installation height min / max. mm: min 300 record sizes: 745 x 770 hose unity snail diameter mm: 50 hose weights gr: 343 hose volumes cm?: 377 hose pressure cash: In 1892 mass and weights dimensions LxBxH m: 4.6 x 1.4 x 2.1 machine weights kg: 7000 other 2 x nuclear train, accumulator, new hydraulic tubes, Hydromotor anew. Heisskanal 4 zones

Manufacturer:ZM Zwickauer Maschinenfabrik Year: 1993 Power: 30 kW Allowable Operating Pressure: 8 bar Rotation speed: 5870 1/min Technical data of supply fan: Manufacturer: ILKA VEB Turbowerke Meißen Type: Lann 500 Year: 1991 Weight: 28 kg Flow: 1,43 - 1,94 m^3/s The total increase in pressure: 358 - 177 Pa Fan rotation speed: 1450 1/min Power: 0,7 kW Technical data of motor: Manufacturer: VEM Elektromotorenwerke Thurm Type: YP 1G4 Rotation speed: 1380 obr/min Power: 0,75 kW Voltage supply: 220/380 V 50 Hz The current consumption:3,45 / 2,0 A Weight: 11 kg Technical data of transformer: Manufacturer: TuR Transformatoren und Rontgenwerk Type: SVS 372 Year: 1991 Power: 37 kW Voltage supply: 380 V Control voltage: 220 V Nominal current: 72 A

Engel Injection Moulding Machine Type: IT 1300/250-HL SAINT CONTROL: CC 100 Year: In 1997 Clamping unit Clamping force t: 250 Opening stroke mms: 850 installation height min / max. mm: 350 Mould fixing platen size h x v: 1050 x 650 Injection unit Screw size mms: 60 Injection shot weight in Polysterol gr: 661 Injection volume cm?: 735 Injection pressure increased cash: 1480 Size and weight dimension HxWxD m: 6.9 x 2 x 2.1 Totally weight kg: 22000

Thermal store / buffertank with a nominal capacity of 40,000 litres on 2 steel bases. Contents: approx. 40 m³ / 40,000 litres Material: steel Diameter with insulation: 2.75 m Diameter without insulation: approx. 2,50 m Year built: approx 2007 Buffer in cylindrical shape. Insulated by mineral/glass fibres, 10cm thick. Panels are made of aluminium sheets. The container is in used state, and has been drained and cleaned professionally. The heat storage tank has a separate connection pair (forward / reverse) for the heat supply (E.g. from CHP, boiler) and heat extraction (e.g. from a heating network). Thus, a real buffering is possible, and a temporary extraction higher than the thermal power of the heat generator, eg. to deal with heat peaks. Optionally and at additional cost more pairs of connection can be installed to connect another heat generator to this buffer. Flanges  ...

Ferromatik Injection Moulding Machine Type: Milacron Elektra 100 p. 14866 Runhour, Full electric Control: IQT Year: In 2000 Clamping unit Clamping force t: 100 Opening stroke mms: 920 Distance between tie bars mm: 470 x 470 installations height min / max. mm: 250/520 Mould fixing platen size h x v: 690 x 690 Injection unit Screw size mms: 40 Injection shot weight in Polysterol gr: 180 Injection volume cm?: 201 Injection pressure increased cash: 2530 Size and weight dimension HxWxD m: 7.6 x 1.8 x 2.2 Totally weight kg: 6930 Additional information 14866 Runhour euro map 12

NEW COOLING TUNNELS BY BAK-TEC for bread, buns, croissant, puff pastry, fish, meat an all other foods etc. available with PVC-belt or stainless steel mesh belt Example: BTI-K 400 -- Working width: 400 mm -- Infeed: 1000 mm -- Outfeed: 1000 mm -- Cooling chamber: 6000 mm -- COPELAND cooling unit 3HP -- complete in stainless steel -- Belt speed: 0-3 m/min. -- Variable speed with inverter -- Belt specification: Food grade PU belt -- Cooling temperature: 0-10 °C -- German CE-confirmation -- 1 year warranty -- with manual book in German / English -- OPTION: -- suitable 400 mm Enrobing machine -- Inspection / Test run and delivery with startup on request -- Leasing business possible -- Publicity prices for SÜDBACK fair 2016 -- Already working for large factories in Germany

Cat.-Nr. 12-1090 in a very good condition Capacity: 4000 litres/h Year of Construction: 1981 Masch-Nr. 21628 Original Price: Euro 6000,- Measurements and Weight: LxWxH: 126 x 40 x 109 cm Weight: 115 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

ABB Arc Guard TVOC-2-240 Arc Flash Guard COMPLETE SET Built 2012 The new retail value for these parts is Euro 8500,- Like new, only been used for 3 years. 6x complete set available. -- TVOC-2-240 - ABB TVOC-2-240, ARC MONITOR W/HMI, 100-240VAC/DC The Arc Guard TVOC-2 builds on the well-appreciated TVOC design and offers unmatched arc monitoring. With over 35 years of experience, Arc Guard System has become an industry standard in several key markets, helping to protect personnel and businesses around the world. The TVOC-2 is an optical detection system that together with an external breaker can limit the damage done to personnel and equipment in case of an arc accident happening. Main benefits Increased safety to personnel and equipment Minimizes downtime after arc accident has happened Easy-to-read interface makes reading status information quick and easy Simp ...

Cat. No. 12-1135 in very good condition Measurements and Weight: HxLxW: 200 x 55 x 107 cm Weight: 135 kg Year of Construction: 1979 Temp: 18-40°C Motor capacity: 2,66 kW Rotating speed: 120 – 340 U/min. Pressure: 4-6 bar 3 kW 130 l/min., 7800 l/h 16,5 bar DN 100 DN 80 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

1 x Farrel Banbury internal Mixer, Model 00C. Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, oil injector, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. Includes an operator panel. In good condition.

Net valley Synergy 600 / 5500E Injection moulding machine Control: DSP Year: In 2004 Clamping unit Clamping force t:600 Opening stroke mms: 0-1000 Distance between tie bars mm:1220x1220 installation height min / max. mm: 500/1000 Mould fixing platen size h x v:1620 / 1620 Injection unit Screw size mm:100 Injection shot weight in Polysterol gr:2711 Injection volume cm?:2827 Injection pressure increased bar:1950 Size and weight totally weight Kg:36500 / 17500 Runhour 60,000 h Additional information Euromap 12

From the current promotion we offer cheap 20ft first trip containers! Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof plywood panels made of hardwood. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can therefore be easily lifted and implemented without damage by means of forklifts, i.e. no crane is required for lifting. Due to their massive and weather-resistant design and the fact that sea containers are manufactured according to ISO and CSC standards, they are perfectly suited as storage, material or workshop containers and can be sold again, especially after many years of use, almost without any loss of value. TECHNICAL DATA / TECHNICA ...

Part cleaning system cleaning system part cleaning machine cleaning equipment Metal cleaning equipment Kliro Centrimat L 15 kg Year of construction 1998 Panel Mount ACP protected 6000 with internal conveyor Centrimat C3 manual The original price of this machine was 25,000 euros. The machine requires no additives to clean, but the parts are cleaned by the centrifugal force. Device 2.300 kg Cabinet 50 kg Dimensions: Footprint unit without Cabinet 1200 x 1200 mm Height 1680 mm Cabinet 650 x 650 mm Height 1960 mm KLIRO Anlagenbau Marienheide No. 5700145 VEM motors GmbH Wernigerode K11R 132 No. 88 Rothstein protection systems GmbH Marienheide Siemens COROS OP3 RITTAL-Werk Rudolf LOH GmbH Herborn AE 1360 No. 134617 RITTAL-Werk Rudolf LOH GmbH Herborn AE 1556 No. 039556 Maschinenfabrik bihler Halblech type B-4 No. 22732 Machine is fully functional.

Engel hose pouring machine type: IT 2000-350 controls: CC 90 construction year: In 1987 Schliesseinheit Schliesskraft t: 350 opening ways mm: 700 cross-beam measure mm: 735x735 installation height min / max. mm: 250/660 record size: 1080 x 1080 hose unity snail diameter mm: 70 hose weights gr: 1009 hose volumes cm?: 1154 hose pressure cash: 1400 mass and weights dimensions LxBxH m: 9.00 x 2.10 x 2.40 machine weights kg: 20500 other Euromap 12 angels Robot

1 piece snow shovel (presentaion unit,2 x used so Mint) > Quick recording with forks > Protection against unintended slippage > Clearance angle 2 x to the left or right adjustable > Rubber cutting edge attached 150 x 20 mm, thus it is faster Change later possible > Surface painted RAL 2000 (yellow-orange) > technical data: -Blade width: 1500 mm -adjustable space width: 1,100 / 1,300 / 1,500 mm -Plate height: 620 mm -Fork cross sectional area: 150 x 50 mm -Fork distance: 420 mm -Tare weight: 175 kg -incl. 1 year p + K.-warranty included > MSRP manufacturer: Recommended Manufacturer Price Euro 1.275 export price (delivery inside Germany + 19% Tax) PICK up price from 71116 Gaertringen (Shipping extra on request, possible) save over 37 % compared to Manufacturer price Be ready, because the next winter / weat ...

Engel hose pouring machine type: IT 1300/250 control: CC 90 construction year: In 1991 Schliesseinheit Schliesskraft t: 250 opening ways mm: 600 cross-beam measure mm: 635 x 635 installation heights min / max. mm: 200 / 600 record size: 200 / 600 hose unity snail diameter mm: 60 hose weights gr: 735 hose volumes cm?: 661 hose pressure cash: 1500 mass and weights machine weight kg: 12500 other Euromap 12 angels Robot

1 factory-tested, well-preserved single-girder ceiling crane Load approx. 3,200 kg Wingspan approx. 6.280 mm Hook path about 12,000 mm Make DEMAG Year of production/workshop testing 1991/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min

Engel hose pouring machine type: IT 20000/1800, with Engel ERC 203/1-N Robot control: ERC88 / construction year CC90 A01: In 1991 Schliesseinheit Schliesskraft t: in 1800 cross-beam measure mm: 1400 installation height min / max. mm: 900/1700 record size: In 2100 x in 2100 hose unity snail diameter mm: 160 hose weights gr: 12500 hose volumes cm?: 12958 hose pressure cash: 1600 mass and weights dimensions LxBxH m: 19.8 x 3.5 x 3.1 machine weights kg: 172000 (137000/35000) other with Engel row ERC 203/1-N Robot Euromap 2core

1 factory-tested, well preserved two girder magnet overhead travelling crane with helical wire-stabilized trolleys for magnetic-beam operation Load approx. 2 x 3.200 kg = 6.400 kg Wingspan approx. 18,720 mm Hook way about 10,000 mm Make chairs / DEMAG Year of production / workshop testing 1991/2016 FEM 3 M Hubklasse H 3 Beanspruchungsgruppe B 5 Crane equipped with 2 movable separately and together, inclined cable stabilized DEMAG double girder trolleys with 2 elevators, radio control, magnetic control and shape steel magnetic system with 2 groups of â 2 magnets to the transport of long material and concrete steel Working speeds: Hoist around 2.1/12.6 m / min Cross travel approx. 10.0/40.0 m / min Crane drive approx. 0-80.0 m / min

Hydraulic Straight Side Press P 313 Manufacturer: Russian Maker Model: P 313 Year of manufacture: 1985 Very good condition, after general overhaul in 2011! Machine with new electrics! our stock Rudniki Technical details : Max.Force: 250T Table: 1400x1700mm Slider stroke: 600mm Distance between table and slider: 1060mm Table thickness: 160mm Slider idle stroke: 290mm/sec. Slider working feed: 12mm/sec. Slider return: 150mm/sec. Daylight between columns: 1700mm Ejectror’s speed: 100mm/sec. Main motor: 40kW Press dimensions: 3665x2890x5200mm Press weight: 28.000kg

Category: Packaging type: Palettiermaschine name: Pressant Universally Venetian blind manufacturer: Max Kettner GmbH machine type: Palettenbelader fur cardboards, Trays etc. standard number: 89 / xxxx construction year: In 1990 achievement: up to 250 positions / h dimension: ca 2.500x5.000x4.000 mms connection: electrically 400VAC, 50 hertz, 35A type SPS: S7-115U, CPU 943 switch barrier: 2x800mm control console: Push buttons and luminous dispatch riders colour: Green state: Very much cultivated, no corrosion

1 work place certified, very well received., absolutely Mint double girder overhead travelling crane with helical rope stabilized LEG / DEMAG trolley Load approx. 2 x 4,000 = 8000 kg capacity of the hub works about 2 x 6,300 = 12,500 kg Wingspan approx. 10.880 mm Hook path about 10,000 mm Make SCHEFFER Year of production/workshop test 1996/2016 Crane classification H 3 B 4 Crane equipped with: -De-MAG lifting works in FEM 3 m, schrägseilstabiliert -Demag Crane and trolley motors -Radio control -Magnetic control -Magnetic beam with sheet metal magnet -SCHENCK weighing device -Long travel with frequency inverter control Working speeds: Hoist around 1.2/12.5 m / min Trolley gear approx. 8.0/32.0 m / min Crane chassis approx. 5.0 80.0 m / min

Manufacturer: Nagema . fountain pen Varifill 110/15 regulation: Glass. construction year: In 1995 Type: Monoblok 110/15 technical data: To -110 filling valves to-15-figure Kronenkorker - run direction: left on the right -Doppel-Evakuierung control: Siemens S5

Robot Kuka KR150 series in 2000 construction year 2006 reach 2700 mms weight 1245 kg load 150 kg control KRC2 ed05 weight 185 kg software state V5.3.6 Kuka KCP2 ed05 connecting pipelines 15 m .

1 neuwertiger, factory-tested single overhead travelling crane with angle trolley Oblique cord stabilization for traverse operation Payload 10.000 kg Span approximately 15,850 mm make VOITH Year of production/workshop test 1995/2016 Lasting only 1 year equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation (magnetic control prepared, but not included in the delivery), trolley with frequency control operating speeds, cradle frame, radio remote control: Hoist load approx. 0 8.3 m / min Load approx. 0 22.0 m / min Trolley gear 0-40.0 m / min Crane chassis 0-60.0/90.0 m / min

Fine impactor, opening: approx. 1,000 x 700 mm, with inlet and outlet box, semimobile on steel skids, for soft and medium hard rock, construction year estimated

Robot Kuka KR150L110 series in 2000 construction year 2002 reach 3100 mms weight 1245 kg load 110 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

1 factory-tested, very well preserved double girder crane with 4 wheels per side to minimise wheel loads Load approx. 100,000/32,000 kg Wingspan approx. 26,700 mm Hook way approx. 14,000 mm Make SKET-year of manufacture/overhaul/workshop test 1981/2000/2016 Very low equipped with high-quality two-rail wind work trolley with main hub usage as a mounted crane 100 t and auxiliary hoist 32 t, cabins - and radio control, ideal wheel load distribution by 4 wheels per side working speeds: Hoist main hoist 100 t up to 0.25/2.5 m / min auxiliary hoist 32 t up to approx. 7.0 m / min Trolley gear approx. 7.0/20,0 m / min Crane chassis approx. 11.0/32.0 m / min

Robot Kuka KR180L130 series in 2000 construction year 2002 reach 3100 mms weight 1245 kg load 130 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Robot Kuka KR180L150 series in 2000 construction year 2002 reach 2900 mms weight 1245 kg load 150 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Robot Kuka KR180 series in 2000 construction year 2002 reach 2700 mms weight 1245 kg load 180 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Brand Mutfakci Model MLP100 ID M50 Status Active Price 600 € + VAT Year of manufacture 2004 Power 10 KW Location Oradea, Romania Gas Rotisserie - 9 spit: Mutfakç? MLP100 with 9 spit rods capacity (1030 mm each), capacity: 36-40 chickens, stainless steel casing, each spit rod can spin independently, inner light, fat collection drawer. Dimensions 1320 x 570 x 1800 mm. Motor voltage: 380 V, 10 kW. Spit rods are missing. The can be ordered from the manufacturer. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, chang ...

Robot Kuka KR150 series in 2000 construction year 2002 reach 2700 mms weight 1245 kg load 150 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m / 15 m .

Robot Kuka KR30-2 construction year 2002 reach 2000 mms weight 865 kg load 30 kg anew varnishes control VKRC2 (VW/Audi Version) weight 185 kg software state V4.1.7 SP08 (standard Kuka) Teachpendant Kuka KCP2 (standard Kuka) connecting pipelines 7 m .