year 2014 used for sale

: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 200 Year of construction: 1991 1: mixture task box DN 150 Usage: for the slurry task on the average grading railway of the Schwingentwässeres Execution mixture task box: welded and bolted steel sheet construction with a 10 mm strong LINATEX lining and a removable, with 20 mm LINATEX baffle wall. Inlet port: DN 150 flange, born after DN 10 2: Schwingentwässerer type 1240 Machine number: 1127 Dimensions: Width 1200, length 4000 mm Execution: The sieve bin and the actuator yoke, welded and bolted steel construction with one-piece side, rear window, dropping snout rubberized. Drive unit: 1 double unbalance Exciter type S3, 1 drive motor 7,5 kW, 1000 rpm, design B3 3: screen surfaces Classification: single-track plan screening surface width 385 mm, stoma lengthwise in the direction of request, gap width  ...

Attachment: Chamber filter press - as good as new, demonstrator Hours of operation: No Usage area: Chamber filter press, pilot plant, wine press Design: page Holm led Filter plate format: 390 x 390 mm Plate number: 14 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 2.8 m sq Presses contents: approx. 35 dm3 PCB package length: 391 mm Filter pressure: 15 PSI Plate transport: manually Frame: Steel Product-contacting parts: PP + stainless steel Dimensions: Lxwxh approx. 1695 x 750 x 630 mm Weight: 610 kg (photo identical plant) Pumps: optional Purchase or rent: Tours of the facilities in consultation with us to work. Added: multiple attachments are there about End of April available. Order please, because the demand is very high. You want to rent this facility or to buy? Contact us, we are available.

Discus level sanding machine with Vertikaler-Schleifspindel and Schleifradaufnahme f?r Ceramische-Schleifsegmente. Construction year 1957 the machine is technical and geometrically in very good state. it was waited up to Au?erbetriebsetzung 2006 regelmig. hydraulic table impulse: infinitely variable adjustably vertical delivery: hydraulically Schleifrad-Durchme?er: 600 mms impulse achievement: 22 kW Magnetabme?ung: 300 x 1,000 mms Schleiftischabme?ung: 400 x 1,700 mms

Attachment: Chamber filter press used Usage area: Chamber filter press, pilot plant Design: page Holm led Filter plate format: 400 x 400 mm Plate number: 15 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 3.0 m square Presses contents: approx. 37 dm3 PCB package length: 700 mm Filter pressure: 15 PSI Plate transport: manually Pumps: optional Buying or renting: Visit the facilities in consultation with us to work. You want to rent this facility or to buy? Contact us, we are available.

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Generators 16kVA Make/type: KR-16spezial Continuous average power (kVA): 16 Engine make/type: Kubota / D1105 EK2 Speed: 3000 rpm Speed control: Mechanical Generator brand / Type: Leroy Somer / 3748 J6/2 Voltage: 230/400 Volt, 50 Hz Control: Start/stop control panel with insulation monitoring and digital display Trailer: 2.5 to tandem car chassis with adjustable drawbar, overrun brakes, 4 piece parking jacks on each side Accessories: Device box with lockable handle Socket combination: 3 piece Sockets individually fused with machines 1 piece CEE Socket 16 amp. 5-pin machines protected Sockets lockable door Condition: used without guarantee, year of construction 2009, hours less than 250 hours

Thyssen Krupp model GK270NC Banbury type internal mixer, 4 wing tangential rotors, Year of manufacture: 2003 Latest Continental design chamber! Hydraulic hopper + power pack. Body and hopper only in good condition. Unidrive gearbox and motor can be quoted for if required (same centres as 11D or F270).

Alpine dairymen curve machine, uses type SR28SL construction year 1994

GLIMEK Dough Divider SD-180 - exhibition machine, brand new condition, year of manufacture: 2024 - working range 50 - 1.000 g, 120 - 1.600 g or 180 - 2.300 g, capacity range 750 - 1.800 pieces per hour, frequency converter drive for infinitely adjustable machine speed, 90 liter hopper made from stainless steel, machine covers made from stainless steel, mechanical flour duster made from stainless steel power supply: 1.1 kW, electrical supply: 400V/50-60Hz/3~

Complete boiler system Kohlbach Year of construction - 1990 Power - 4000 kW For very wet chips incl. bark Water content - about 15000 l Water temperature - 120 degree Automatic chips infeeding with walking floor Movable sliding floor Day storage tank Automatic hydraulically ash removal Cyclone for dust separation Electrostatic precipitator Complete controling system Well maintained, excellent condition

Cauldron standing on 4 wheels Manufacturer: Appointed Serial No.: -. Year of construction: 1971 Volume: 150 LTR. Material: 1.4541 In the pressroom: Operating pressure: 5 bar Capacity: 20 LTR. Operating temperature: 158 ° C In the loading space: Content: 150 LTR. Operating temperature: 100 ° C Dimensions: Bowl ø: approx. 540 mm Interior height front: approx. 640 mm Interior height rear: 580 mm L x W x H: 700 x 700 x 1,100 mm (with wheels) Containers with heating jacket with sloping to the spout, tank outer shape rectangular, marbled at top: 1 hinged lid approx. 600 mm diameter with hinge and handle on the front: 1 temperature display 1 valve 1 " 1 spout DN 32 with shut-off valve at the back: Heating valve

Complete boiler system Weiss Year of construction - 1989 Power - 2500 kW For very wet chips incl. bark Water content - about 12500 l Water temperature - 120 degree Automatic chips infeeding with walking floor Movable sliding floor Day storage tank Automatic hydraulical ash removal Cyclon for dust separation Complete controling system Well maintained, excellent condition

USED PUMP FOR SALE Liquid ring vacuum pumps with magnetic coupling SIHI liquid ring vacuum pumps with magnetic coupling are displacement pumps of simple and robust design meeting high demands on tightness. Two liquid surrounded sleeve bearings of tungsten and silicon carbide (WC / SiC) bear the shaft axially and radial. The application of high-grade magnetic materials with high density of energy guarantees the transmission of the nominal torque and safety during the start-up phase and in case of overload. Liquid Ring Vacuum Pump Application Field: • Power industry • Coal industry • Paper industry: • Food and beverage • Plastic machinery • Mining metallurgy • Tobacco industry • Petrochemical industry. • Textile industry. • Wood processing industry • Medical industry • Oil field production • Sugar industry • Aviation test

We have for sale a number of used hydrocyclones from the German manufacturer AKW A+V. Condition: USED Type: RWS 105 Nominal Diameter mm: 50 mm Cut Size dT50,?m: 5-15 Pressure Loss,bar: 1,5 - 3.0 Capacity ,m3/h: 2,4 -7,6 - High pressure resistance, The best operating pressure is much higher than the like products, much easier to reach the better separating effect, good cost performance. - Each type of hydrocyclones has big amount of successful applications, it can ensure that every operating hydrocyclone has the balance feeds. - The involute design from Germany makes the AKW hydrocyclones having better effects of concentration and separation. - Extra long lifetime. - Standardized parts, it is very convenient to change the spare parts.

(with hydraulical width changer, year 2004) Cuting width 760 mm uting high 710 mm Stroke 500 mm With hydraulical width changer, year 2004 Log feeding, outfeed splitter guide. Clamping and auxiliary carriages. Top Machine in best contition

Front forklift OK Type DFG KLF construction year 1969 pay load 2,500 kg axle load in front 6,230 kg - behind 2,510 kg unloaded weight 5,120 kg zulaess. Total weight 7,620 kg with questions we stand to you with pleasure at the possession.

We have for sale a Vacuum Evaporation Plant: The plant consists of: -3-stage vacuum evaporation system VV 75 KDB -Down-flow evaporator Condest 13 K-Niro Technical details available upon request. Vacuum evaporation is a process that has been used by the large-scale chemical industry for decades. Using vacuum evaporation systems allowed (for the first time) utilizing the advantages of this process also in small and medium-scale applications. Vacuum evaporation systems have been developed specifically for the metal machining industry as well as for applications in the field of environmental protection. It is used to treat under vacuum aqueous solutions that contain pollutants. Typical fields of application include: - Recover electrolytes from electroplating - Keeping a uniform rinsing water quality in static rinsing tanks - Volume reduction of sewage wate ...

Multiple rip saw Paul K34G / 1200 With loading and stacking Wamhoff Plate size: max. 2.25 mx 1.10 m 6 cycles / min, Year of construction 1988, Mechanization - 1993 Main motor 48 kW Condition - excellent With: infeeding roller bed, outfeeding roller bed, suction and several saw blades.

Robot Kuka KR200-2 construction year 2000 reach 2400 mms weight 1125 kg load 200 kg control KRC1 with 7-th axis in the construction cupboard weight 136 kg software state V2.3.24 Kuka KCP1 connecting pipelines 7 m .

The system is set up to: PET bottles 0,5 lt 32,000 b/h 1,0lt 29,000 b/h 1,5lt 22,000 b/h 2, 0 lt 18,000 b/h. Additionally for oneway glass bottles 0,25 lt / 27,000 FL/h. Consisting of: -Depalletizers, make. Zecchetti, type: DEPAL 800 B - SN: 1821, for PET and glass bottles, 30,000 FL/h, origin 1994 -for glass bottles:-rinser, make Rivi, 60 pliers 2 nozzles type: twin rinser 2R/60/132, origin. 1994 -glass-bottle filler, Fabr. Simonazzi, type: Eurostar 70.16.8 TK-RAA. 040, with 70 filling valves and 16 crwon heads and aluminium screwcapper 8 head origin 1981 -filling height Inspector, make HEUFT, type: SPECTRUM HBBVXTI36,origin1994 -dating NAGI A 300 year 2002 -shrink packer for glass bottles, makeBaumer, type: T/R 60-40 Univers,1994 -beverage mixer, make Simonazzi,type: Predosix D3 T3, 15.000 lt/h,origin 1984 -beverage analyser, make. Maselli blue, type: RIT-843 BRIX-CO2  ...

Power: 4,000 - 4,500 / hour Number of cars: 2-railway-round runners current Cup format: Ø 60 mm, height: 80 mm maximum Cup size: Ø 75 mm, height: 80 mm Mainfiller: -for liquid products -Manufacturer: Hamba -Filling volume: 50-250 cm3 -Cleaning: CIP capable Closure: Sealing Dimensions (Lxwxh): 1.45 x 1.45 m x 2.7 m Power consumption: 400 V; 12.5 A; 5 KW Air requirement: 10.000 L / h. Schuy can general overhaul this system for you. This applied all electrical and pneumatic components on the latest state of the art and mechanical components are obsolete and are 80% new quality available. You will also receive a 1 year guarantee for the plant. Please contact us.

Year of construction 1994 Stack mass: Depth - 2.40 meters High - 3.00 mtr Long - 11.50 meters Drying capacity - са.75 m3 gross Fans - 7 х 0.75 квт Chamber construction - container construction is not desmantlebel! Interior trim - Aluminium welded 2.0 mm Insulation - rock wool 80 mm Outdoor installation Electrical cabinet with computer control system MB-400 Very good condition

Function: The Bosch TFA 241 is a thermoforming machine fills liquid products in previously defined Cup sizes. First, the railway film with H2O2 is sterilized and then heated to a predetermined temperature. This temperature is reached, the slide in the next step will be deep. After the cups got their form, these are filled with product. Then, the upper rail slide with H2O2 is sterilized. Then, the filled Cup with the top track slide are welded and punched out before they are passed on a conveyor belt of the drain. Performance: 13,500 - 31,500 cups per hour Number of runs: 5-track and longitudinal runners current format: Ø 44 mm, height 15 mm maximum Cup size: Ø 44 mm height 29 mm Prefiller: Cleaning: CIP capable Mainfiller: -for liquid products -Manufacturer: Orlita -Dosing type: cold HD -Filling volume: 8-15 cm3 Disinfection: H2O2 Date of printing: Inkjet Dimens ...

Input Board PC 1 NE 80 (Grundig 9.44904-1706 FD-Nr. 6006 04 100643) Exchange 520,-€ + Mwst Without Exchange 620,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Collin Two Roll Lab Mill, Roll size: 150mm dia x 400mm wide Hydraulic nip adjustment, Model: WALZWERKE 150, Year of manufacture: 1988, Power: 19kW Electric roll heating with oil - operating temp 50 to 220 C Each roll variable speed from 0 -30 rpm Manual lubrication, programable controls. In very good condition. Manuals/drawings available.

Robot Kuka KR210L180 series in 2000 construction year 2002 reach 2700 mms weight 1245 kg load 180 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

PSU Board NSV 56 (Grundig 44206-860.02) (Sparepart for NSV 52, NSV 54, NSV 55, NSV 56) inkl. 1 Year Warranty Exchangeprice 595,-€ with Exchange 695,-€ Dialog 1attached NSV 52 ( Grundig Nr. 9.44904-1703 FD-Nr. 6006 04 100657) Dialog 2 attached NSV 54 ( Grundig Nr. 9.44904-1203 FD-Nr. 6006 04 100678) Dialog 3 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Dialog 4 attached NSV 56 ( Grundig Nr. 44206-860.02 FD-Nr. 6006 04 100687 01) Contour 1 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Contour 2 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Contour 3 attached NSV 56 ( Grundig Nr. 44206-860.02 FD-Nr. 6006 04 100687 01) Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitor ...

Heavy duty lathe Waldrich Distance between centers: 12000 mm Turning diameter: -Over bed: 2000 mm -Over cross slide: 1640 mm Weight of work piece: max 40 ton Spindle speed range, stepless: 1,5-92,5 rpm Year of manufacturing: 1960

Robot Kuka KR180 series in 2000 construction year 2001 reach 2700 mms weight 1245 kg load 180 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Bosch PSU for Amplifier TR 10, TR 15, TR 20, TR 25 ( 038035 ) inkl. 1 Jahr Garantie Exchangeprice 740,-€ without Exchange 875,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

used, kpl. 1 year warranty, plate size 630 x 630 mm, 60 plates, open or closed outlet, 30 mm cake thickness, pressure max. 15 bar, capacity approx. 576 liters, filter area 40m2, dimensions 4800 x 1200 x 1200 mm, weight 2.5 tons, motor hydraulics, drip plate, filtrate channel, with or without Filter cloths

Input and Output Board PC 1 NEA 80 (Grundig 9.44904-1707 FD-Nr. 6006 04 100642) Exchangeprice 520,-€ with Exchange 620,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

used, kpl. 1 year warranty, plate size 630 x 630 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 350 liters, filter area 28m2, dimensions 4200 x 1100 x 1700 mm, weight 2 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

Material: High-grade steel Year of manufacture: 2011 Engine: 4 kW Content: 50 ltr 1 chopper You can also get the entire system with all components.

Centrifuge ELLER work standing on 3 feet : Manufacturer eller Type: 734 C. Serial No.: 78-043 Year of construction: 1978 Drum diameter: 800 mm Speed: 1,500 rpm Capacity: 120 kg The eller centrifuge is a filter centrifuge for pharmaceuticals, fine chemicals and chemistry industry, at the solid liquid separation happens mechanically. The typical process includes filling, washing of the cake, spin and unloading. A possible criterion is the way the solids are discharged. This determines the respective execution. In very good condition!

We have 3 pieces of high-grade steel chimneys of the brand Hobatherm on camp model: Hobatherm high-grade steel chimney system Compactly Z-13.1.2-03.2274 Baucert construction year 2004 the chimneys were 2 years in a BHKW in use an application. the height of the chimneys amounts to approx. 20 m and they are provided with an isolation. price each, from camp 6,500.00 ? + VAT

UNIROLL from DORST Type: SRHV 1 Year of manufacture: 1990 Generally overhould in: 2017 Machine is in very good condition! Including Vacuumpump!

PSU PC 2 NSV 90 (Grundig 9.44904-906 FD-Nr. 6006 04 100664) Exchangeprice 430,-€ with Exchange 530,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Material: stainless steel Year of manufacture: 1980 Content: 1000 ltr Weight: 350 kg Length x Width x Height: 3800 mm x 1900 mm x 1900 mm Drive shaft: 6,8 kW, snail 0,6W; Drive snail: 80 1/min. We develop, plan and build for you the whole plant exactly for your needs from new and/or used machines. More then 1000 used machines on stock. Write us below!

Robot Kuka KR150L110 series in 2000 construction year 2002 reach 3100 mms weight 1245 kg load 110 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m / 15 m .

PSU PC 1 NSV 80 (Grundig 9.44904-1705 FD-Nr. 6006 04 100640) Exchangeprice 500,-€ with Exchange 600,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

CNC Heavy Duty Universal Lathe POTISJE PA45 Year of manufacture 1991 Machine complete In its working condition Very good condition Technical details : Swing over bed 910 mm Swing over carriage 630 mm Height of centres 450 mm Max turning lenght 6000 mm Longitudinal carriage feed Min 0,049 rpm Max 5,6 rpm Transversal carriage feed Min 0,024 rpm Max 2,8 rpm Morse taper 6 Spindle rotational speed Min 11 rpm Max 500 rpm Dismensions (lenght x width) 8725 x1400mm Main motor power 15 kW Weight 11000kg

CPU PC 1 NPP 80 (Grundig 9.44904-1903 FD-Nr. 6006 04 100641) Exchange 710,-€ + Mwst without Exchange 810,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

1 x Werner & Pfleiderer 400mm dia dump extruder, Type: EAE400, Fabrik nr 221284, Werk nr 416295, Year: 1985, double hydraulic crammer feed, feed section 965mm wide, L/D ratio 8:1, with 235kW DC variable speed motor, Sheeting head to produce up to 1000mm wide sheet. Complete with controls and hydraulics etc.

Robot Kuka KR30-2 construction year 2002 reach 2000 mms weight 867 kg load 30 kg ontrol KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 / 15 m

Input Board PC 2 NE 90 (Grundig 9.44904-1708 FD-Nr. 6006 04 100662) Exchange 400,-€ + Mwst without Exchange 500,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

1 x Carter model MK3 Plus Banbury internal mixer, Serial number: 8-77, Year: Sept 1977, Chamber volume 90litre, approx batch weight: 85kgs, pneumatic hopper, S.S.A. type dust stops, Oil cooled roller bearings, hydraulic drop door + linear actuator, cored rotors with rotary joints fitted, flood cooling to body, standard bullgear drive with 150kW, 495rpm, 3ph,m 50Hz, 380/415V slip ring motor and starter. Key interlock safety system. Complete with all operator controls, pneumatics, hydraulics etc and in good condition.

Input and Output Board PC 2 NEA 90 (Grundig 9.44904-1709 FD-Nr. 6006 04 100663) Exchange 480,-€ + Mwst without Exchange 580,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

1 x Francis Shaw 45mm dia coldfeed rubber extruder, M/c no. 4513, Year: 1992, power roll feed, L/D ratio 15:1, hinged straight head with c\clamp, cored scred + jacketed barrel with built in temp control unit. Complete with control panel and in very good condition. Box of dies included.

Robot Kuka KR6-2 construction year 2001 reach 1500 mms weight 220 kg load 6 kg control KRC1 weight 136 kg software state V2.3.24 Kuka KCP1 connecting pipelines 7 m .