ye i used for sale

General SKU060X645 LocationBarneveld MakeYstral TypeZ-66 No.213230804 Year of construction2004, Vessels make Jagri were built in 1978 Pressure Working pressure3 Bar Main Features MaterialStainless steel Motor2 KW Specified Features - Inline mixer Continuous reactorInline-dispersing installation (1x) Motor2,0 KW, 290/500 Volt (Ex) With vessel(3x of which 1 is equipped with stirrer) Capacity1x 40 Ltr en 1x 21 Ltr With jacketcheck MaterialStainless steel 1.4571 (316Ti) Information Mounted on frame(stainless steel) With switchcheck Floorspace1,8x1,2 M Total height2,0 M Weight525 KG ATEX compatiblecheckInline high shear mixersYstralMixers > Inline high shear mixersBrand > Ystral What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the m ...

General SKU041Z170 LocationBarneveld MakeForplex Chateaubriant TypeFL-4 No.562 Year of constructionunknown Main Features Motor75 KW Inlet diameter650 mm Specified Features - Fine Impact Mill MaterialMild steel Fine Impact Mills Grinder(1x) Rotor sizedia. 650mm With grinding trackdia. 665mm With hoppercheck Inlet320x300mm Feeding with vibro feedercheck Motor75,0 KW, 400 Volt Information Floorspace1,2x1,3 M Total height1,5 M Weight1900 KGFine Impact MillsForplexMills > Fine Impact MillsBrand > Forplex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU251M192 LocationBarneveld MakeFluko - Fluid Kotthoff GmbH Essen TypeDMS 3,2/25-20 No.14078-02 Year of construction2005 Main Features MaterialStainless steel Motor11 KW Rotor150 mm Specified Features - Inline mixer Continuous reactorIn-line dispersing machine (1x) Rotor sizesdia. 150mm Inletdia. 50mm Outletdia. 50mm Motor11,0 KW, 400/690 Volt Rotor speed2930 Rpm MaterialStainless steel 1.4571 (316Ti) Information Floorspace1,1x0,5 M Total height0,7 M Weight240 KGInline high shear mixersFlukoMixers > Inline high shear mixersBrand > Fluko What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU251M191 LocationBarneveld MakeFluko - Fluid Kotthoff GmbH Essen TypeDMS 3,2/50-20 No.14078-01 Year of construction2005 Main Features MaterialStainless steel Motor45 KW Rotor150 mm Specified Features - Inline mixer MaterialStainless steel 1.4571 (316Ti) Continuous reactorIn-line dispersing machine (1x) Rotor sizesdia. 150mm Inletdia. 80mm Outletdia. 80mm Motor45,0 KW, 400/690 Volt Rotor speed2960 Rpm Information Floorspace1,4x0,8 M Total height0,8 M Weight500 KGInline high shear mixersFlukoMixers > Inline high shear mixersBrand > Fluko What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU022A121 LocationBarneveld MakeBran + Luebbe TypeCentrisol MC-50 No.9190756 Year of constructionunknown Main Features MaterialStainless steel Motor7.5 KW Rotor160 mm Specified Features - Inline mixer Continuous reactor(1x) Rotor sizesdia. 160mm, Mixing chamber dia. 200mm Inletdia. 50mm Capacitymax. 500 Ltr/Hr Motor7,5 KW, 400/690 Volt Rotor speed2915 Rpm Electric heating(330 Watt, 220 Volt, Max. 200 Degr. C.) MaterialStainless steel Information Mounted on framecheck Floorspace0,6x0,4 M Total height1,5 M Technical specs Extra informationmixing chamber dia. 200 mmInline high shear mixersBran + LuebbeMixers > Inline high shear mixersBrand > Bran + Luebbe What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Bar ...

General SKUR0378 LocationBarneveld MakeAlpine Ultraplex Type500 UP beater plate No.135101 Year of construction1966 Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill MaterialMild steel Fine Impact Mills Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 380/660 Volt Speed4500 rpm Information Total height1,1 M Weight600 kg Floorspace1,0x0,9 MFine Impact MillsAlpineMills > Fine Impact MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0380 LocationBarneveld MakeAlpine Ultraplex Type500 UP beater plate No.141724 Year of construction1970 Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 400 Volt Fine Impact Mills MaterialMild steel Information Total height1,1 M Weight1020 Kg Floorspace1,1x0,9 MFine Impact MillsAlpineMills > Fine Impact MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU408S978 LocationBarneveld MakeKoruma Maschinenbau GmbH (D) TypeDisho In-Line 0/100 No.5389 Year of construction1995 Main Features MaterialStainless steel Motor5.5 KW Inlet diameter32 mm Rotor100 mm Specified Features - Inline mixer Continuous reactorIn Line Dispersing and Homogenising Rotor sizesdia. 100 InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Rotor speed2885 rpm With vesselcheck Capacity40 ltr. Vessel sizesdia. 390x400mm with stirrer 0,55 kW 230/400 Volt 309-1539 rpm Inline high shear mixers InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Speed2885 rpm With propellor stirrercheck Motor0,55 kW 230/400 Volt With variable speed drivecheck Speed309-1539 rpm MaterialStainless steel 1.4571 (316Ti) Information Mounted on framecheck With switchcheck Weight200 Kg Floorspace1,2x0,6 M Total height1,7 ...

General SKU160P705 LocationBarneveld MakePallmann TypePP 4 No.0668145 Year of construction1968 Main Features Motor15 KW Inlet diameter400 mm Specified Features - Fine Impact Mill Turbo cone mill(1x) 2 Driven rotors(impeller & co-rotating baffle plate) Rotor sizeDia. 400mm Inlet155x100mm Motor15 KW + 7,5 KW, 380 Volt SpeedMax. 4100 Rpm, Grinding disc 1450 Rpm Fine Impact Mills MaterialMild steel Information With switchgearcheck Floorspace2,1x1,1 M Total height0,8 MFine Impact MillsPallmannMills > Fine Impact MillsBrand > Pallmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU253M221 LocationBarneveld MakeBauermeister & Co. Norderstedt TypeUT-63 No.940785 Year of construction1989 Material Housing materialMild steel Rotor materialStainless steel 1.4462 (Duplex2205) Main Features Motor185 KW Inlet diameter1200 mm Width400 mm Specified Features - Fine Impact Mill Turbo mill(1x) Rotor sizedia. 1200x400mm With sieve cagecheck Motor185,0 KW, 415 Volt Information Mounted on framecheck Floorspace3,9x1,5 M Total height3,0 M Extra Specifications-- RECONDITIONED -- Fine Impact MillsReconditionedBauermeisterMills > Fine Impact MillsReconditionedBrand > Bauermeister What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more mach ...

General SKU205N026 LocationBarneveld MakeWaukesha Cherry-Burrell TypeSP4 2009 No.1000002431623 Main Features MaterialStainless steel Motor18.5 KW Rotor80 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizes+/- dia.80mm Inletdia.47mm Outletdia.47mm Number of stages:1 With mechanical sealcheck Motor18,5 KW, 380/660 Volt Rotor speed2930 Rpm MaterialStainless steel Information Mounted on framecheck Floorspace1,4x0,4 M Total height0,7 M Weight300 KGInline high shear mixersWaukeshaMixers > Inline high shear mixersBrand > Waukesha What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0088 LocationBarneveld MakeSchröder & Co Machinenfabrik No.33-177 Year of constructionunknown Main Features MaterialStainless steel Motor2.2 KW Rotor90 mm Specified Features - Inline mixer Rotor sizesdia. 90mm Inletdia. 20mm Outletdia. 20mm Motor2,2 kW 230 Volt With frequency controllercheck MaterialStainless steel 1.4401 (316) Inline high shear mixers Inlet20 mm Outlet20 mm Information Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,1x0,5 M Total height1,6 M Weight220 KgInline high shear mixersSchröderMixers > Inline high shear mixersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...

General SKU058C219 LocationBarneveld TypeFM342D Main Features MaterialStainless steel Motor15 KW Specified Features - Inline mixer Inlet70 mm Outlet40 mm Motor15KW, 380 volt Information Floorspace1,1 x 0.4 m Total height0.5 m Weight280 kgInline high shear mixers-Mixers > Inline high shear mixersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU272T609 LocationBarneveld MakePallmann TypeREF 6N No.0111.92.049 Main Features Motor30 KW Specified Features - Fine Impact Mill MaterialMild steel, Stainless steel Fine Impact Mills Grindercheck Toothed disc millcheck Rotor sizedia. 570x130 mm Grinding room sizedia. 600x160 mm With grinding platenscheck Inlet135x175 mm Motor30 kW 380 Volt Speed3700 rpm Information Year of construction1992 Mounted on framecheck Floor space1,7x1 m Total height1m Weight1100 kg Extra SpecificationsEasy cleanFine Impact MillsPallmannMills > Fine Impact MillsBrand > Pallmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU268K300 LocationBarneveld MakeGlatt Inox AG Process Technology TypeIST-2000 No.100117 Year of construction2001 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket8 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume2000 Ltr. Motor75 KW Specified Features - Paddle dryer Paddle dryercheck Capacity2000 Ltr. Trough sizesDia: 1350x1500mm InletDN300 Outlet300x220mm With jacket87+93+15 Ltr Shaft can be heatedHeating surface total 12 m2 Max. temperature-20/160°C With mechanical sealcheck Motorhydr. unit 75,0 + 45,0 KW, 400/690 Volt (Ex) MaterialStainless steel 1.4404 (316L) Information Floorspace4,6x2,2m Total height6,0m Weight12.000kg ATEX compatiblecheck Technical specs Extra informationincluding Brüdenfilter 3m2Minerals & inorganicAPIBiopharmaceuticalDyes & pigmentsAgrochemicalsSolid pharmaceutics ...

General SKU245P306 LocationBarneveld MakeHosokawa Alpine Type160 UPZ No.6667 Year of construction1995 Main Features Motor6 KW Inlet diameter160 mm Specified Features - Fine Impact Mill MaterialStainless steel Fine Impact Mills Grinderplate beater Rotor sizedia.160mm Moving hammerscheck With grinding trackcheck Feeding with rotating valvecheck Motor4,9/6 KW, 380 Volt Information Extra SpecificationsComplete size reduction system including Rotary valve Typ 150 V2A, K-Tron Soder S200 dosing screw, dust filter and AERON filterFine Impact MillsHosokawa AlpineMills > Fine Impact MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...

General SKU060X676 LocationBarneveld MakeKotthoff TypeMS-3D No.31859 Year of construction1977, Reconditioned in 2004 by Fluko Main Features MaterialStainless steel Motor24 KW Rotor280 mm Specified Features - Inline mixer Continuous reactorIn-line dispersing machine (1x) Rotor sizesdia. 280x300mm With jacketcheck With mechanical sealcheck Motor24,0 KW, 500 Volt (Ex) MaterialStainless steel Information ATEX compatiblecheckInline high shear mixersKotthoff KoelnMixers > Inline high shear mixersBrand > Kotthoff Koeln What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU006Y250 LocationBarneveld MakeKotthoff TypeMS/3D No.32191 Year of constructionunknown Main Features MaterialStainless steel Motor27 KW Rotor280 mm Specified Features - Inline mixer Continuous reactorIn-line dispersing machine (1x) Rotor sizesdia. 280x300mm With jacketcheck With mechanical sealcheck Motor27,0 KW, 500 Volt (Ex) MaterialStainless steel Information ATEX compatiblecheckInline high shear mixersKotthoff KoelnMixers > Inline high shear mixersBrand > Kotthoff Koeln What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU006Y251 LocationBarneveld MakeKotthoff TypeMS-3D No.31858 Year of construction1977 Main Features MaterialStainless steel Motor24 KW Rotor280 mm Specified Features - Inline mixer Continuous reactorIn-line dispersing machine (1x) Rotor sizesdia. 280x300mm With jacketcheck With mechanical sealcheck Motor24,0 KW, 500 Volt (Ex) MaterialStainless steel Information ATEX compatiblecheckInline high shear mixersKotthoff KoelnMixers > Inline high shear mixersBrand > Kotthoff Koeln What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0379 LocationBarneveld MakeAlpine Ultraplex Type500 UP beater plate No.162166 Year of construction1981 Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill MaterialMild steel Fine Impact Mills Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 380/660 Volt Speed4500 rpm Information Total height1,1 M Weight720 Kg Floorspace1,1x0,9 MFine Impact MillsAlpineMills > Fine Impact MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU060X677 LocationBarneveld MakeKotthoff KG Köln TypeMischsirene MS2 - D/2.10 No.22047 Year of constructionunknown Main Features MaterialStainless steel Motor3.6 KW Rotor120 mm Specified Features - Inline mixer Continuous reactorIn-line dispersing machine (1x) Rotor sizesdia. 120mm Motor3,6 KW, 220/380 Volt (Ex) With variable speed drivecheck MaterialStainless steel Information Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace1,1x0,4 M Total height0,8 M ATEX compatiblecheckInline high shear mixersKotthoff KoelnMixers > Inline high shear mixersBrand > Kotthoff Koeln What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more ...

General SKU006Y252 LocationBarneveld MakeKotthoff TypeMS-3D No.31857 Year of construction1977 Main Features MaterialStainless steel Motor24 KW Rotor280 mm Specified Features - Inline mixer MaterialStainless steel Continuous reactorIn-line dispersing machine (1x) Rotor sizesdia. 280x300mm With jacketcheck With mechanical sealcheck Motor24,0 KW, 500 Volt (Ex) Information ATEX compatiblecheckInline high shear mixersKotthoff KoelnMixers > Inline high shear mixersBrand > Kotthoff Koeln What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU041Z171 LocationBarneveld MakeForplex Chateaubriant TypeFL-4 No.561 Year of constructionunknown Main Features Motor75 KW Inlet diameter650 mm Specified Features - Fine Impact Mill Grinder(1x) Rotor sizedia. 650mm With grinding trackdia. 665mm With hoppercheck Inlet320x300mm Feeding with vibro feedercheck Motor75,0 KW, 400 Volt Fine Impact Mills MaterialMild steel Information Floorspacemill 1,2x1,3 M Total height1,5 M Weight1900 KGFine Impact MillsForplexMills > Fine Impact MillsBrand > Forplex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU040Z169 LocationBarneveld MakeHaagen & Rinau / Unimix TypeSH-500 No.301166/2 Year of construction2002 Main Features MaterialStainless steel Motor22 KW Specified Features - Inline mixer Continuous reactorIn-line homogeniser (1x) Capacitymax. 600 Ltr/Min With mechanical sealcheck Motor22,0 KW, 400 Volt (motor can be cooled) With frequency controllercheck MaterialStainless steel Information Floorspace0,8x0,5 M Total height0,5 MInline high shear mixersHaagen & RinauMixers > Inline high shear mixersBrand > Haagen & Rinau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU040Z166 LocationBarneveld MakeKinematica AG CH-6014 Littau TypeMegatron MT 1-90 MF No.M-90123 Year of constructionunknown Main Features MaterialStainless steel Motor7.5 KW Rotor80 mm Specified Features - Inline mixer Continuous reactorInline dispersing processor (1x) Rotor sizesdia. 80mm, Stator dia. 90mm Inletdia. 50mm Outletdia. 50mm With mechanical sealcheck Motor7,5 KW, 380 Volt (Ex) MaterialStainless steel Information Mounted on framecheck With switchgearcheck Floorspace0,8x0,8 M Total height1,5 M Weight360 KG ATEX compatiblecheck Technical specs Extra informationstator dia. 90 mmInline high shear mixersKinematicaMixers > Inline high shear mixersBrand > Kinematica What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspe ...

Robot ABB Robotics IRB 140 S4C+M2000 Control: S4C+ M2000 Number of axles: 6 Max. load capacity: 6 kg Max. working area: 810 mm Year of construction: 2006 Scope of delivery : robot, controller, cables, teachpanel, circuit diagrams The stated net amount is exclusive of the statutory VAT of 19%.

Control type: CC200 Number of hours: 8,000 hours Closing Closing force: 110 T Opening stroke: 350 mm Between columns: rotating table: 1,200 mm Plate dimensions: rotating plate: 1,200 mm Mini/maxi mold: 250 mm Max distance between trays: 600 mm Injection: Screw diameter: 18 mm Screw length: 18.7D cm3: 38 Bars: 2060 General: Motor power: 15KW Heating power: 5.3KW Closing weight: 10T Injection weight: Length dimensions: 2.62M Width dimensions: 1.68M Height dimensions: 4M Options: Bi metal: yes

Type of control: NC4 Closing force: 50 T Opening stroke: 260 mm Between columns: 330 x 330 mm Tray dimensions: 490 x 500 mm Mini/maxi mould: 150/350 mm Max gap between trays: 610 mm Injection: Screw diameter: 30 mm Screw length: 20D cm3: 74 Bars: 1400 General: Motor power: 20 kW Heating power: 5 kw Closing weight: Injection weight: 3.3 tons Dimensions length: 4.00 m Dimensions width: 1.20 m Dimensions height: 1.80 m Options: Cores: NO Bi metal: YES

Machine: DEMAG 50 T INTELEC Year: 2007 Control type: NC4 Number of hours: 25000H Closing Closing force: 50 T Between columns: 330 x 330 mm Tray dimensions: 490 x 500 mm Mini / maxi mold: 150/350 mm Max distance between plates: 410 mm Injection: Screw diameter: 30 mm cm3: 74 Bars: 1400 General: Motor power: 20 kw Heating power: 5 kw Injection weight: 3.3 tonnes Dimensions length: 4.00 m Dimensions width: 1.20 m Dimensions height: 1.80 m Options: Cores: NO Bi metal: YES

Number of hours: 34,000 H Closing Closing force: 450T Opening stroke: 800 mm Between columns: 810 x 810 mm Tray dimensions: 1210 x 1210 mm Mini/maxi mould: 160/420 mm Max gap between trays: mm Injection: Screw diameter: 84 mm Screw length: 20D cm3: 1663 Bars: 1510 General: Motor power: kW Heating power: kw Closing weight: 24T

Control type: NC4 Closing force: 50 T Between columns: 330 x 330 mm Tray dimensions: 490 x 500 mm Mini / maxi mold: 150/350 mm Max distance between plates: 410 mm Screw diameter: 30 mm cm3: 74 Bars: 1400 Motor power: 20 kw Heating power: 5 kw Cores: NO Bi metal

INJECTION UNIT Screw diameter: 84 mm Calculated injection volume: 1663 cm³ Pressure on the material: 1510 bars Laminating capacity PS: 418 Kg / h Screw Speed: 210 RPM CLOSURE UNIT Closing force: 4500 kN Opening stroke: 800 mm Thickness Mold Mini / Max: 350/750 mm Passage between columns: 810 x 810 mm Tray size: 1210 x 1210 mm GENERAL Total installed power: 26.2 kW Size: (WxHxD) 8.37 x 2.21 x 1.89 m. Weight: 24000 Kg EQUIPMENT Locking - Double toggle

Control type: NC 5 Number of hours: 27,000 hours Closing Closing force: 350 T Opening stroke: 700 mm Between columns: 760 x 710 mm Tray dimensions: 1070 X 1015 mm Mini/maxi mold: 400/670mm Max distance between trays: 1370 mm Injection: Screw diameter: 60 mm Screw length: 20 D cm3: 2366 Bars: 890 General: Motor power: 55 kW Heating power: 23.1 kW Closing weight: 18 T Injection weight: Dimensions length: 6.5 m Width dimensions: 1.8 m Dimensions height: 2.3m Options: Cores: hydraulic predisposition 2 cores Robot interface: E67 Bi metal: YES Others: 4 blow guns, 2 Kisler mold pressure ports, laminar flow, 8 hot runners

ABB Robotics IRB 1400 robot complete Control: S4C-M98 Max. working radius: approx. 1450 mm Load capacity: 5 kg Year of construction: 1998 Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams 2 weeks start-up warranty. No further warranty in addition, spare parts are always available from stock. The robot is fully functional and can be visited. Free loading - ex works The stated net price is exclusive of the statutory 19% VAT.

ABB Robotics Robot IRB 2400/16 S4C M98 Control: S4C M98 Number of axles: 6 Max. load capacity: 16 kg Max. working area: 1550 mm Year of construction: 2000 Scope of delivery : Robot, Controller, Cable, Teachpanel, Circuit diagrams 2 weeks start-up guarantee. No further warranty. In addition, spare parts are always available from stock. Robot is fully functional and can be visited. The indicated retail price is exclusive of the statutory VAT of 19%.

Premixer, make Jakü, type: Premix IDM-200, for 15.000 lt/h, for 4 components, built 1998, mechanically overhauled in 2023.

Siemens 6AG4140-3BC04-0PA0 SIMATIC IPC427D (Microbox PC) HD graphic onboard 2x10/100/1000 Mbps Ethernet RJ45 4xUSB V3.0 (high current) PCIe (optional) 24 V DC power supply Core I3-3217UE 2x Gbit Ethernet (IE/PN) DIN rail mounting 4 GB 1x RS-232 without PCIE WIN Embedded Standard 7 32-bit Replaceable without drive SSD 240 GB Standard (MLC) without SIMATIC software New, original sealed box

Description: Consisting of 3 pieces Partly equipped with gripping tool Incl. switch cabinets, manual controls and base Approx. Onsite Dimension. (l x w x h): 4,000 x 2,000 x 2,100 mm, weight approx.: 2,000 kg

Manufacturer / type Toshiba IS650GTW i59 Closing force [tons] 650 Year of production 2007 Screw diameter [mm] 95 Number of aggregates 1 type of screw Type: 95DBG-AT, Part # F049997, Stellite12 The minimum height of the mold [mm] 450.0 weight [kg] 32100 installed power kW 101.2 thermal insulation on the aggregate - blanket on the aggregate upper / lower YES nominal power of heaters for units KW 43.95 length mm 7940 width mm 2670 height mm 2300 occupied area of 21.2 m² occupied area with a cage 32.0 m² hydraulic pump 1 SQP43-50 hydraulic pump 2 SQP43-50 MC09 robot (W 733-0610)

Borche BS150-III injection molding machine Year of production - 2015 Injection components: Screw diameter: 45 mm Injection Weight: 321g Injection pressure: 1850 bar Injection volume: 341cc Closure elements: Closing force: 150 t Clearance between columns: 460×460 mm Maximum table plate dimensions: 670×670 mm Ejector: hydraulic Closure system: knee Hybrid machine: energy-saving, high-speed, very quiet Euromap 67 robot interface air valve x 1 Hydraulic core string x 2 Central lubrication system The main motor - a servomotor controlled by an inverter It is possible to buy a Shini robot Dimensions: Weight: 4300 kg Length/Width/Height: 4.85×1.42×1.64 m Power: Pump/Motor: 15 kW Heaters: 9.6 kW Total: 24.6 kW

Producer DEMAG Type IntElect 80-370-100 NC4 All electric Year 2006 Clamping unit Clamping force 80 ton Opening stroke 850 mm Distance between tie bars 370 X 370 mm Mould height min. 250 mm Mould height max. 510 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 22 mm Injection volume 37 cm³ Shot weight 32 g Injection pressure 2580 bar Measurements and weight Dimensions 4,50 X 1,28 X 1,95 m Machine weight 4750 kg

Producer DEMAG Type Demag IntElect 150/520-310 NC4 All electric Year 2005 Clamping unit Clamping force 150 ton Opening stroke 850 mm Distance between tie bars 520 X 520 mm Mould height min. 275 mm Injection unit Screw diameter 30 mm Injection volume 64 cm³ Shot weight 58 g Injection pressure 2500 bar Measurements and weight Dimensions 5,35 X 1,48 X 2,28 m Machine weight 6400 kg

Producer DEMAG Type intElect 50/330-100 NC4 All electric Year 2009 Clamping unit Clamping force 50 ton Opening stroke 260 mm Distance between tie bars 330 x 330 mm Mould height min. 150 mm Mould height max. 350 mm Platen size (h x v) 500 x 490 mm Injection unit Screw diameter 25 mm Injection volume 51 cm³ Shot weight 46 g Injection pressure 2005 bar Measurements and weight Dimensions 3,97 x 1,19 x 2,21 m Machine weight 3300 kg Additional Information: 1 Anguß-Picker Fa. Wittmann W702 year 2008

Caterpillar C15 - Unused - 475 HP - MCW

Caterpillar C15 - Unused - 540 HP - MCW

General SKU322S570 LocationBarneveld MakeQVF Glastechnik GmbH (D) TypeWashing, dissolving, filtering, precipitating and recovering installation No.155153/2214 Year of construction1995 Pressure Working pressure0.3 Bar Vacuum possiblecheck Main Features MaterialGlass Motor0.37 KW Specified Features - Glass-lined Reactor Capacity120 ltr (4x), 110 ltr. (1x) Vessel sizesdia. 595x480m (4x), dia. 400x750mm (1x) Max. temperature20 degr. C With propellor stirrer0,37 kW 230/400 Volt 175-775 rpm With paddle stirrercheck Motor0,25 kW 230/400 Volt Speed mixing shaft110-630 rpm Glass Reactors MaterialGlass Information Mounted on legsframe With switchgearas is Weight1800 Kg Floorspace4,6x2,0 M Total height2,3 M Extra SpecificationsQVF Glasstechnik Washing, dissolving, filtering, precipitating, and recovering installation The entire installation is built in a tubular steel  ...

- Output 10000bts/ 0.75l - Isobaric filler - 40 filling valves - With pre-evacuation - Self-levelling - 7-head capping turret, 29 mm crown corks - 7-head capping turret, corks - 7-head capping turret, ALU screws - 28 x 24mm - Machine in good condition - Annual service by Krones technicians

B&A REF: 9008 TON: 800 SHOT WEIGHT: 3687G SCREW DIAMETER: 100MM STROKE VOLUME: 3927CM3 INJECTION PRESSURE: 1470BAR PLATEN SIZES: 1470 X 1470MM DBTB: 1010 X 1010MM MIN MOULD HEIGHT: 380MM MAX MOULD HEIGHT: 975MM MOULD OPENING STROKE: 1025MM MAX DAYLIGHT: 2000MM EJECTOR STROKE: 300MM CONTROLS: KEBA AIR VALVES: 2 CORE PULL: 2 SCREW DRIVE: HYDRAULIC

Used empty glass bottle inspector HEUFT with pre-inspector and rejection Built in 2016. Dismantled and immediately available.

The machine is designed for steam heating up to 10 bar (140°C) or water cooling and has a capacity of about 3.45 kG with a specific gravity of 1.0, i.e. working volume about 3.45 l. Flow drive of 60 hp, suitable for impeller speeds of 88 to 8 rpm, mixing chamber is steel housing, inner surfaces chrome-plated