ye i used for sale

BEING NEGOTIATED Sumitomo Demag 280 ton Systec SP 280/630-840 year of manufacture 2014 280 Ton Clamp 2800kn Tie Bar Dist 630 Injection unit 840 Made in Schwaig, Germany 400v 50hz Exworks South America

Blustrafos Transformer BLUTRAFOS MANUFACTURER LOT: 45,908 MONTH/YEAR 05/2007 REF 6606,0001 REFR: IN TYPE TT CLASS ISOL. 1.2 KV DEGREE. PROT. IP-21 PHASES 3 TEMPERATURE CLASS: TEMPERATURE B ELEVATION 105 ºC IMPEDANCE AT 115º C 5.5% POWER 15 kVA FREQUENCY 60 HZ DYM1 CONNECTION GROUP MASS: 156 KG VOLTAGE: 380 CURRENT 22.8 A VOLTAGE: 480V CURRENT: 18.04 A

Technical data: V- 36 hl, 1.5 bar, stainless steel producer: Steinecker / Germany volume: 3.6 m3 pressure: 1.5 bar two cooling zones with chilled water propeller stirrer drive

20 Somet Thema E11 Year 1993-1994 360cm width 6 Harness Frames 1 IRO weft feeder 2 Beams (twin beam) 1 Cloth roll   10 Looms working and 10 looms are stopped Each loom can be tested before shipment.

The scope of delivery includes: 01x Dumpster, second choice Manufacturer: Weber Total width: approx. 1,360 mm Total depth: approx. 770 mm Total height: approx. 1,310 mm Content: 360 kg Volume: 770 liters Further data / information: Material color bin: black Material color lid: yellow Usable width: approx. 1,085 mm Useful depth: approx. 640 mm Usable height: approx. 1,000 mm Material: Polyethylene (PE) Tyres: 4 tyres (2x braked) Net weight: 68 kg Note: Useful width, useful depth are tapered downwards. General information about the article: This item is for pickup only. An additional desired transport or shipment of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery from us.

Refrigeration system with 2 compressors / refrigeration circuits. This plant is intended for larger areas. all information can be seen on the last pictures.

Refrigeration system with a fan Year of construction: 1993 Power : 2,2KW Capacity : 41,6 dm³ further information can be found on the type plate

Refrigeration system in two versions! You can purchase both or individually. Year of construction :2005 Power : 51,8kW Voltage : 400V 50Hz For further information, please refer to the type plate.

8 Sulzer TPS Terry Looms 360cm Year 2000 8 Colours 16 Frames 20 Levers 1.25 Beams 1 Cloth roll 2 Weft feeders on the loom (total 29 pcs for 8 looms) Staubli dobby 2668 Heald wires and droppers 5000 Total number of beams are 20 for 8 machines

Complete plastics recycling plant in operation. PRICE MACHINE WITH 2 PISTON FILTERS: 520.000€ PRICE MACHINE WITH 1 PISTON FILTER AND A 1 BRITAS FILTER MODEL ABMF 1050-12: 660.000€ 8,500 HOURS OF WORK. IN PERFECT CONDITION. PRODUCTION /HOUR: 900/1,000 KGS. MATERIAL: LDPE, QUALITIES 98/2 AND 99/1 AFTER 1 WASH.

Indoor agriculture / vertical hydroponic farm, and the machines are associated with these operations. We are talking about leafy vegetables and herbs, to name a few examples: Iceberg lettuce, romaine, basil, mint, coriander, rocket etc. The machines are part of the same solution developed and manufactured by the Taiwanese company YesHealth. The machines are 2 years old. The drying machine has not been in operation for one year. Seeder, 2 kW Harvester, 8 kW Cleaning and drying machine, 20 kW Labelling machine, 300W Find more here - /

Chiller Clivet -Model: WSAN-YES 18.2 -The chiller has a heat pump -Cooling capacity: 53.1 kW -Heating capacity: 53.3 kW -Dimensions: 2340 x 1120 x 2130 mm -Number of fans: 2 x 750 mm -Year of production: 2021 -Power supply: 400V 50Hz 3N -Weight: 640 kg -Quantity in stock: 1 -Condition: new

AIRCOOLED CHILLER CLIVET WSAT YES 18.2 53 KW Cooling capacity: 53 kW / 15,1 tons (12/7 — 35°C) Year of manufacture: 2020 Heat exchanger: Plate Condenser: Microchannel, Aluminum Type of refrigerant: R32 Refrigerant circuit: 1 pcs. Compressors: 2 pcs. Mitsubishi LVB65FAEMC (scroll, inverter) Number of fans: 2 pcs. (Frequency inverter) Dimensions: 2.40 x 1.15 x 2.16 m Weight: 575 kg Working hours: 0/0 h Condition: New

Gear motor, electric motor, electric gear motor, flat gear motor -Manufacturer: ZHE JIANG, geared motor type BRF37-YO.18-69.33-M1-I -Speed: 19 rpm -Engine: ZHE JIANG type YS 6324 -Power: 7.5 kW / 1330 rpm -Shaft: Ø 25 x 50 mm -Protection rating: IP 55 -Quantity: 2x geared motor available -Price per piece -Dimension: 430/190/H1800 mm -Weight: 18 kg/pc.

General SKUR0162 MakeAZO Liquids GmbH (D) LocationBarneveld TypeContinous Powder Mixing Main Features MaterialStainless steel Motor12 KW Specified Features - Inline mixer MaterialStainless steel Information No.111182-01 Year of construction2015 Floor space3,3x1,5 M Total height2,8 M Weight1900 Kg Extra SpecificationsIncluded 1 X Blender type PMXR material Stainless steel, motor 2,2 kW, with seal barrier system brand Aerni type AFR 168 ZS 8L max pressure 23 bar with liquid circulation pump 0,18 kW 1 x 520 ltr. tank brand Urban type wasserbehalter serial number 15.1606 pressureless, conical bottom, flat top. single-walled, uninsulated, on legs. 1 x Schenk Process powder funnel MechaTron type GRLS 27.070.000.0083 serial number V093547.A01 built in 2015 with a vibrating chute underneath. 1 x ITT Borneman screw spindle pump type SLH-4G-2033 working pressure 4 bar 5.5 kW. 1 x  ...

WE OFFER AN NICE CONDITION LVD , WE CAN MAKE FOR CUSTOMER AS WELL START UP OF MACHINE INCLUDING TRAINING CUTTING CAPACITY 4KW CUTTING PLATES 6000 X 2000 MACHINE WAS COMPLETE OWERHAULED 2 YEARS AGO - SERVIS COST WAS 35000 EUR LAST SERVICE WAS MADE 6 MONTHS AGO MACHINE RUNNING IN THE PRODUCTION TILL FIRST WEEK IN MARCH 2022 WE OFFER MACHINE LOADED ON TRUCK. NEEDS 2 TRUCK FOR TRANSPORT, NORMAL TRUCK FOR CLIENT WE CAN ORGANIZE TRANSPORT AS WELL WE OFFER MACHINE FREE LOADED ON TRUCK. LASER- GE FANUC C4000 - MODEL E TRANSPORT FOR CUSTOMER WE CAN ORGANIZE AS WELL

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Slicing speed: up to 70 pieces per minute Description The thickness of the bread slice is 15 mm easily replaceable blade system 1783

Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Ixion, bench drill type BT13ST -Clamping table: 170 x 170 mm -Travel: 210 mm -Spindle holder: drill chuck B16 -Projection: 180 mm -Speeds: 420 - 2100 rpm stepless -Pillar: diameter 65 mm -Spindle stroke: 70 mm, with fine stop -Motor: AEG 0.7/1.0 kW -Voltage: 380V -Dimensions: 620/235/H800 mm -Weight: 70kg

Used Injection Molding Machine AOKI year 2014 The Used Injection Molding Machine AOKI year 2014 represents a highly efficient and precise solution in the field of packaging, specifically designed for the production of preforms for plastic bottles through the injection and molding process. Manufactured by Aoki Technical Laboratory, Inc., a recognized leader in molding technology for packaging, this machine offers reliable performance with a proven track record. The model SBIII-100L-20, produced in May 2014, is a used machine in excellent condition, providing exceptional value to companies looking to integrate it into their existing production lines. Moreover, the machine’s advanced features and high output make it suitable for large-scale production environments. Injection and Molding Technology The Used Injection Molding Machine AOKI year 2014 utilizes the highly advanced injection  ...

Used Case Divider Inserter APE year 1998 Introduction In the world of bottling, every detail matters. Moreover, the efficiency and reliability of the APE Case Divider Inserter can make the difference between a smooth production line and additional costs due to unforeseen interruptions. The APE 2001 Model: A Pillar of Reliability This machine has been a benchmark in the bottling industry since its launch in 1998. This model is designed to accurately and swiftly insert dividers into 6 and 12-bottle cartons, ensuring efficient and uninterrupted production flow. Key Technical Features The robust design of the APE Case Divider Inserter and its advanced technology ensures consistent performance even in high-production environments. Additionally, the divider insertion system has been optimized to guarantee precise and uniform positioning, minimizing waste and enhancing packaging quality. Operat ...

used for dried apple products, Format set for stand-up pouches with a surface area of approx. 100 x 60 mm available., consisting of:, Vibration - Shaking Table for the task of filling the products, Z-Elevator, Blue smooth belt with carriers Usable width: approx. 380 mm, Belt length straight inlet: approx. 1,200 mm Overhead conveyor section: approx. 2,660 mm, Straight section above: approx. 1,200 mm Carrier height: approx. 65 mm Distance between carriers approx. 200 mm Feed height: approx. 430 mm, With corresponding stainless steel frame, Multihead weigher Ishida Optima CCW-EM-214, built in 2003, 14 heads, mounted on base frame, operator unit, digital display, printing unit,, Z-Elevator, same design as described above, Form-fill-wrapping machine Kopas JK 200 F-M-R Servo, year 2017

Used case packer APE INCA 2000 year 2004 The APE Impianti INCA 2000 bottling machine optimizes filling processes in the bottling sector. It provides high performance and adapts to various production needs. APE Impianti manufactured the INCA 2000 model in 2004 with a focus on robustness and reliability. Its full stainless steel construction also ensures corrosion resistance, delivering long-lasting durability in high-demand environments. Capacity and Operating Speed of the Case Packer APE INCA 2000 The INCA 2000 operates at a rate of 6000 bottles per hour. It maintains high-speed standards without compromising filling accuracy. This capacity meets the demands of intensive bottling lines, improving production flow. Additionally, it minimizes machine downtime. Companies needing high daily volumes gain a particular advantage from this speed. Container Specifications The APE Impianti INCA 200 ...

Used Posimat bottle unscrambler - year 2021Technical Specifications & Performance DataThis Bottle Unscrambler POSIFLEX-A-20 is a proven solution for high-efficiency bottle handling at the start of a used bottling line. Manufactured by Posimat, it is engineered to orient and feed empty bottles reliably into downstream industrial packaging equipment, supporting beverage production environments that demand consistent uptime and gentle container treatment.Manufacturer: PosimatModel/Type: POSIFLEX-A-20Manufacturing year: 2021Production speed: up to 100 bpm (bottles per minute)Application: Automatic bottle unscrambling and infeed to conveyorsCompliance: CE marked; designed according to 2006/42/CE (Machinery), 2014/30/CE (EMC), 2014/35/CE (Low Voltage)Container handling: Optimized for bottle feeding in beverage production linesUse case: Ideal for second hand installations and upgrades of existi ...

Double vacuum laminator ICOLAM 42/24 Meier Year 2009 Spaces: 2400 x 4200 x 40 mm Total weight: 27 tons Power supply: ca 260 kW Suction volume prechamber: 630 m 3 x 2 High vacuum suction quantity: 2000 m 3 x 2 Type Icolam 42/24 Usuable working size 4.1 x 2.3m Useable sqm 8.51 6 modules per pass Laminator for the encapsulation of photovoltaic modules, is a system running parallel designed for an annual capacity of ca 75 MW, New price 1.350.000,-€ net The laminator is completely dismantled, has produced approximately 3 months of sporadic, used tracks have been hardly visibly during disassembly He is without electric and control cables, ca 10 fixed hydraulic lines are also missing. Control cabinets, vacuum pumps, documentation and accessories are otherwise completely 12 large parts are 6 m long and 3.4 m wide, DON'T go TO a UeBERSEECONTAINER CA 3 trailers material

R26115/18 VITS Impregnation and painting system Model: IPA / S / II Built: 1996 Working width: 2200 mm for finish foil and edges Working width: min. 625 mm Heating: Thermal Oil 250 Dryer control: 80 - 220 Speed: 5 - 120 m/min Impregnation plant Painting works Takeup with thermal oil boiler for impregnating, painting of decorative and similar papers from 30 - 240 g/m2 Available: immediately

<br>SOS block bottom bag machine TRIUMPH III, Windm Ller + H Lscher, with lower patch unit, 2-ply, photocell, several former plates and aisle, option: 4-color printer for final cleaning<br><br>br>

more tech. Details on request

NEW Bainite model BMIM95 95 litre intermeshing type mixer Customs Tariff CN Code: 8477.8093 Manufacturer: Bainite Machines Pvt Ltd Net chamber volume: 95 litre Rotor speed: 6 - 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement) Motor power: 420kW, 1000rpm AC motor, 3ph, 50Hz, 380/400V Discharge door: Hydraulic drop door with linear actuator and toggle latch. Two (2) J Type thermocouples mounted in door top as standard One (1) Single acting pneumatically operated oil injector Feed Hopper Assembly: Hydraulically operated Floating weight: single ?V? bottom type Gearbox: Full unidrive type with S.F. 2.25 Bedplate: Fabricated steel Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Three (3) Zone closed loop temperature control (TCU) Electrical Controls: Schneider make variable frequency drive (VFD) controls with ...

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

type mechanic: IR364-10 type Control: RC30/51 max. load: 10 kg workingrange: 1.500 mm net weight: 264 kg functional checked!

type mechanic: IRB 6400 2.4-120 M97 type Control: S4C max. load: 120 kg workingrange: 2400 mm net weight: 1870 kg functional checked!

Year of construction 2009 like new condition, has worked only sporadically 1 year, Looks machine like new inside The machine is CNC controlled, for the mechanical structuring of thin-film solar cells. The processing heads move over that with a layer of molybdenum metal or other sputtered Glass, with a format 125 x 65 cm, and create an insulating track by material removal. The CNC control controls the movement of the X-, Y-, Z-, A-, and U-axis. all documents, Control Panel, and control are available Original price: 847.000,00 € The complete unit to build a 75MW of production are available. (1 x laser, 2 x mechanical structuring and setting device for needles) Geamt-new value 2.1 mill euro net

QTY. 2 CONTAINERS, OD 655 x ID 250 MM x 560 MM LONG & OD 522 x ID 180 MM x 560 MM LONG, PIRCER DIA. 63 MM,

Properties < b >: < / b > Roll length: 430 mm Axle length: 470 mm Roll diameter: 50 mm Shaft diameter: 8 mm Material: Steel, galvanised 6-kant: approx. 11 x 11 mm Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to. Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects. Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer y ...

1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98, NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motor, 3ph, 660V. Currently without controls, hydraulic unit or lubrication.

SOS Block bottom bag machine TRIUMPH III, Windm�ller + H�lscher, with bottom patch unit, 2 plies, photo cell, several former plates and gears, option: 4 colour tail end printer

Werner & Pfleiderer model GK50UK internal mixer. Chamber volume 85 litre, Net volume: 60 litre (batch size approx 85kg), Tangential type rotors, Year of manufacture: 1971, Pneumatic hopper, Hydraulic drop door discharge with rotary actuator and hydraulic latch. Full unidrive gearbox (August Seegers), with Intermediate selectable 2 speed gearbox, 675 HP rating, rpm 1500/1340, Output 895rpm or 1340rpm. With 550kW, 980A, 1482 rpm motor (fixed speed) Rotor speeds - N895 = 51/47rpm, N1340 = 78/72rpm. Siemens PLC controls.

Used injection molding machine, Manufacturer of Husky Injection Systems Ltd. Type: GL225RS60/50 Year of constr.: 23.04.1998 400 V, 96 A greatest engine, 42 A total load heating Functional The machine can be visited like us. Price: 8.000,00 plus VAT, from stock Sale even after parts possible

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

IBEX MOG 2130BA Serial No. 931278 / 01B 400V, 5.5A integrated fan motor Connections: DN 80 Double mechanical seal, sealingwater connections

Choice of 2 x Francis Shaw K7 MK3 intermix, Total Volume: 320L, Useful volume 210L, Order number: 6061/1 and 6061/2, Year of manufacture: Oct 1986, NR2 Rotors, SSA type dust seals, Hydraulic drop door with linear actuator, Pneumatic hopper, Zamech full unidrive gearbox, Type: WD263-22.5, ratio 22.5:1. with 1000kW, 990rpm, 6000V motor. Rotor speed 44rpm. With modern starter panel, but without operator controls.

The industrial inkjet printer EBS Ink-Jet EBS-230 was produced in 2014. The printer allows for contactless description of various objects that move, for example, on the frame of the fiber laser or on the production conveyor, etc. It is a large-scale printer (6-116 mm, DOD technology). The printer guarantees a legible and durable print on paper, cardboard, plastics (also so-called porous), on fabrics, leather and imitation leather, wood and wood-like products, on ceramic products (also so-called porous), as well as on various types of surfaces metal, etc. An industrial printer of this type is a so-called adapter for another device. It is mounted, for example, at a laser head or an industrial plotter, which cuts elements, while the printer immediately marks them. Technical specifications : - the height of the prints: 6-12.8 with a 7D head (the height of the letter is adjusted by twisti ...

1 x Werner & Pfleiderer model GK90-E intermeshing mixer, Original year of manufacture: 1989, Chamber volume 91 litre, Net batch weight: approx 71kg, PES #3 type rotors, pneumatic hopper, hydraulic drop door, GWK TCU. KWE GmbH full unidrive gearbox input speed 1500rpm, Output speed 48.5rpm with Thrige Electric 470kW, 1520rpm, 380V DC v/s motor, Complete with electrical controls and in good condition.

1 x Werner & Pfleiderer model GK90-E intermeshing mixer, Original year of manufacture: 1989, Chamber volume 91 litre, Net batch weight: approx 71kg, PES #3 type rotors, pneumatic hopper, hydraulic drop door, GWK TCU. KWE GmbH full unidrive gearbox input speed 1500rpm, Output speed 48.5rpm with Thrige Electric 470kW, 1520rpm, 380V DC v/s motor, Complete with electrical controls and in good condition.

Axles: 6 Control: S3 Type: M92 Load: 30 kg Range: 1080 mm Accessories: handheld programming device Attention: without cable Condition: This robot only as spare parts support is available due to his age. The industrial robot has works fine up to the disassembly.

Industrial Container Box 650 liters New goods, large crates, stacking containers, large containers, see pictures L 120 x W 100 x H 78 cm 650 liters volume Net weight 43 kg Colour grey Up to 4000 kg load capacity in stack (at 5° room temperature) 2 runners, also suitable for shelf storage Also closed version available. Liquid-tight, drain valve possible 200 pcs available Negotiation price: € 145,-- net per piece ex stock Larger quantities on request! Goods are in stock. Transport available on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly lo ...

I sell a stacking / destacking system MEINERT (IMA Group) P620 E/S - 2500 / 1300 system, year of construction 2011. Stacking system One-sided steering / also suitable for pallets. Vacuum system (with pump) Rotazion head Automatic charging. Entrance table motorized roller system Exit table on the floor with lifting mechanism motorized roller system Exit table front roller system Entry of feeding roller stazion for stilted material. Security fence fully complete ! Working capacity Approx. 16 cycles / min Plate height 10 - 50mm Min. plate dimensions 250 x 320 mm plate dimensions 1300 x 3000 mm Combined area L.10200mm x W.8700mm Combined power 45kW Year of construction 2011 Available the same. Ready for use, possible to check. With CE certificate and full document.

S1 - insulated 40,000 litres steel tank, aboveground storage tank, cased in zinc plates, heating coil inside, on 2 steel bases, former palm oil tank, good condition. Details of the tank: Contents: approx. 40 m³ / 40,000 litres material: stainless steel tank length: 9,00 m diameter: approx. 2.70 m incl. insulation / 2.50 m without insulation insulation: mineral wool approx. 10 cm, with zinc plating other: heating coil inside, single-walled The container is used, emptied inside and has been cleaned professionally. According with the age there are traces of use. This steel tank / container can be used as a storage tank for whey, vegetable oil, water, liquid food, many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily.  ...

Almost Unused Used CNC rotary axis of company ISEL Automation ! Exceptionally, the product of a competitor . From a trade-in of a complete CNC milling machine ISEL because switching to a T -Rex CNC milling machine by CNC-STEP Top exact product , solid , stable processing . A couple of years old but in top shape . 100mm intake of feed 23mm passage height 320mm Width: 210mm Depth: 270mm Robust cast aluminum design 4 screw fastenings at the foot Stepper Motor 6.0 amps ! Controllable to 48 volts Also have a look at our other cnc machine offers please; ready for operation