ye i used for sale

Used machine in good condition. Available for immediate delivery. - Screw diameter: 40 mm - Injection pressure: 1.211 bar - Injection volume: 201 cm? - Clamping force: 700 kN - Platen size (h x v): 590 x 340 mm - Dimensions (long x wide x high): 3.370 x 3.580 x 2.640 mm - Weight: 7.500 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Clamping force: 600 kN - Mould height max: 190 mm - Platen size (h x v): 910 x 400 mm - Control: CC220

Condition Used Stock Number 3350P Tetra Pak Laval Hoyer extrusion line Type ARB.BORD IND Tetra Pak Laval Hoyer extrusion line Serial number 348-5214 Tetra Pak Laval Hoyer extrusion line Year of construction 1998 Tetra Pak Laval Hoyer extrusion line Capacity 27000 sandwiches/hr Tetra Laval Food Hoyer spiral freezer Type ST LINE 1100 Tetra Laval Food Hoyer spiral freezer Serial number 348-1023 Tetra Laval Food Hoyer spiral freezer Year of construction 1998 Tetra Laval Food Hoyer spiral freezer Refrigerant NH3, Ammonia Tetra Laval Food Hoyer spiral freezer Evaporator 2 pc. Retech GLS 50-18-280 Tetra Laval Food Hoyer spiral freezer Tetra Pak Laval Hoyer dip and transfer unit 12 lane Tetra Laval Food Hoyer spiral freezer Type HOYWRAP MW1200-6 Tetra Laval Food Hoyer spiral freezer Serial number Z415.3872 Tetra Laval Food Hoyer spiral freezer Year of construction 1998 Tetra Pak H ...

MEMMERT ICO150 Incubator/Co2 Oven Equipment in new condition, never used. MEMMERT Part Number: ICO150 Year of Manufacture: 2023 Forced convection Volume: 156 liters Stainless steel chamber Display with wide display Temperature: amb + 5 °C up to + 50 °C IR probe CO₂: 0 to 20% 1 stainless steel water tray included per incubator Visual and audible alarms Sterilization at 180 °C without the need to remove the probes Dimensions W x D x H int.: 719 x 591 x 1066 mm Dimensions W x D x H ext.: 560 x 400 x 700 mm Temperature: ambient + 5 to 50 °C Weight: 92 kg Gross weight: 116 kg Slightly deformed side plate (see photo) This does not hinder the proper functioning of this equipment in any way

Fully automatic dosing, InterDOS 2, WK116/04, approx. 40 cycles/min correspond to 80 cups/min The dosing speed and the dosing volume are infinitely adjustable

Inv. Num. : 8001 Type: IM6120 Producer: KEYENCE Created: 2014 Parameters: Axis X: 100 mm Axis Z: 30 mm Measuring range: 200 x 100/125 x 25 mm Weight: 36 kg

ABB Robot IRB6650 Foundry 200/2.75 S4C+ M2000 , Profibus Control: S4C+ M2000 Number of axes: 6 Max. load capacity: 200 kg Max. working range: 2750 mm Year of Make: 2003 : Robot,Control Scope of Delivery,Cables,Teachpanel,Circuit Diagrams Floppy disk drive for data backup. 2 weeks commissioning warranty. No further warranty In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Further questions will be answered by e-mail or phone.  The amount indicated is net. The statutory VAT of 19% will be added at checkout. You will receive a proper invoice with VAT.

ABB Robotics IRB 6400R 2.5-150 M99 complete robot ,Profibus Control: S4C M99 Number of axes: 6 Max. load capacity: 150 kg max. working range: approx. 2500 mm Year of construction 2002 Scope of delivery: robot,control,cable,teachpanel,operating instructions,circuit diagrams 2 weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Freely loaded / ex works. Further questions will be answered by e-mail or phone.

Scope of delivery: -Valve manifold -Vacuum unit -Hygienic enema -Fill level and closure inspection -Rejection and rejection belt -Technical documentation -Program backup -Extensive carriers available that can be purchased additionally Information without guarantee

Interroll angled-belt conveyor 30° 1525-950-840 RA2327 new Make: Interroll Year of manufacture: 2022 Inlet angle: 30 Length: 800mm shortest length at angle starting, total length 2250 mm Belt width (RB): 840 mm ( 90 mm each ) Frame height: 160 mm Nominal/external width (NB): 950 mm, 1250 with motor average conveying speed: 0,76 m/s, with frequency converter stepples controllable Motor drive: Sew Movi Mot V 230/400, kW 0,75 Overall height side wall: 150 mm Optionally available: Supports All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: angle: 30° scope of delivery: including side guides without supports, inklusive Frequenzumrichter KW: 0,75/S1 condition: new Antrieb: SEW Getriebemotor mit MOVIMOT Electric data: 0,75 kW, 400 Optional erhältlich: Füße Construction year: 2022 Conveying length in mm (NL): 1525 Frame width in mm (NB): 950 ...

ABB Robotics IRB 6600 175/2.8 S4C+M2000 Robot Control: S4C+M2000 Number of axes: 6 Max. load capacity: 175 kg max. working range: 2800 mm Year of Make: 2004 Scope of delivery: robot, controller, cable, teaching panel, circuit diagrams Used goods – normal signs of wear present, yet fully functional. More details and pictures on request.

ABB Robotics IRB 140 S4C+M2000 Robot Control: S4C+ M2000 Number of axes: 6 Max. load capacity: 6 kg Max. working range: 810 mm Year of Make: 2006 Scope of delivery: robot, controller, cable, teaching panel, circuit diagrams

SIKO IF09C/1 - 0002 Interface converter for CAN bus, Jagenberg Diana Pro. Used, tested. Gateway modules for connecting SIKO sensors and displays to standardized fieldbus systems. There are three bus connections available. SIKO offers a specific transmitter for each connection. Up to 31 subscribers can be connected to the Profibus or CAN bus via the RS485 interface.

INA I09 LKS 08VBG3 V1 ( I09LKS08VBG3V1 )

INA LFKL 52 E SF (205-155) ( LFKL52ESF(205-155) )

Technical Specifications & Performance Data The Alfatek 15/1 ISO INNOVAZIONE is a second hand, isobaric filling monoblock designed for professional beverage production of still and sparkling wines. Built in 2002 by Alfatek, this compact unit combines precision filling with reliable capping, making it a strong choice for a used bottling line dedicated to glass wine bottles. Manufacturer: Alfatek Model: 15/1 ISO INNOVAZIONE Year of manufacture: 2002 Configuration: Isobaric filler + integrated capper (monoblock) Filler valves: 15 Capper: 1 head (wine closures as per configuration) Nominal speed: up to 2,500 bph on 0.75 L still wine (actual output varies by product and settings) Container type: Glass bottles Bottle format: 0.75 L Products: Wine (Still), Wine (Sparkling), Spumante Filling technology: Isobaric counterpressure for sparkling products Safety: Safety features included; interlocked ...

Ball screw INA ZKLF 2068.2RS NA ( ZKLF2068.2RSNA ) 02/W6 ASP 14-20 ( 02/W6ASP14-20 ) thread length: 845 mm thread: Ø 32 mm pitch: 4 mm for AGIE CUT 300 used, tested ! Dimensions: 1200 x 210 x 125 mm

Fully functional ironing press (automatic) from N&H (Nagel & Hermann, AT) with conveyor belt Details: - Pressing surface: 1,500 mm width – 800 mm depth - Passage width: 1,700 mm - Conveyor belt: Silicone/Teflon (5,900 mm long – 1,500 mm wide) - Transport: Single cycle or automatic, forward or backward. Belt movement without pressing process, speed infinitely variable - Connection values: electricity 380 V/32 KW. Air 6bar/approx. 80L per stroke - Dimensions: 2.90 m long – 1.86 m wide – 1.70 m high The ironing press has only been used sporadically (at most once per month) in the last 5-6 years. To optimize the transport function, additional rollers were installed both at the back and at the front (see pictures in the appendix). Find more here - / Contact us at -

Dematic roller curve right 90°-600-540 IR795 RA1653 Make: Dematic Running direction: 90° right running Roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 797 mm length: 1790mm Overall height frame: 132 mm Height including motor: 275 mm Motor MOVI-Mot 3x300-500V 0,37kW 1400 u/min max Brake 220-240V Gear motor: SEW WF20 DT71D4/BMG/Z/MM03 Conveyor speed: freely adjustable between 0,142 and 1,42 m/s with frequency converter Scope of delivery: without supports (please enquire if required) Features: Drive type: Round belt Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 600 Roll width in mm: 540 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will  ...

ABB Robotics IRB 2400/16 S4C M98 Robot Control: S4C M98 Number of axes: 6 Max. load capacity: 16 kg max. working range: 1550 mm Year of Make: 2000 Scope of delivery: robot, controller, cable, teaching panel, circuit diagrams 2 weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. The robot is fully functional and can be visited.

Injector with brine mixer Manufacturer: Inject Star Model: BI-124-C-P Made of stainless steel Number of needles: 124 Productivity: 5500 kg/h max Electric power: 5.6 kW Voltage: 400V 50Hz Brine mixer Model: CLB-800 Volume: 800 liters Electric power: 5kW Voltage: 400V 50Hz Touch screen computer control Double cooling Glass gauge for fluid level measuring

Interroll Rising falling Incline belt conveyor with leading belt GF 8168 (7278+890)-690-580 RA2364 Technical data: Conveyor length (NL): 8168 mm ( 7278 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 8168 (7278+890) Nominal / outside width in mm: 690 Belt width in mm: 580 Driven: YES Engine type:  ...

description: For printing of labels, bottles, packaging etc: prints only in black colors, incl. frame Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to hearing from you. All information is supplied without guarantee.

Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to hearing from you. All information is supplied without guarantee.

Robot ABB Robotics IRB 2400/16 IRC5 M2004 , YOC 2007 mechanics only Number of axes: 6 Max. load capacity: 16 kg max. working range: 1550 mm Year of Make: 2007 Scope of delivery: robot mechanics 2 weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Freely loaded / ex works.

Caterpillar C15 - Unused - 475 HP - MCW

Description 13 zone mold heating working hours: 3447

Used-refurbished equipment 6 months warranty refurbishment time approx. 3 weeks 152 needles 600mm tape width max. capacity 6000kg/h Technical data: Power: 8 kW Dimensions (HxWxD): 1880x965x2100 mm Weight: approx. 580 kg Electrical connection: 400V, 50Hz, 3phase

We offer for sale a complete set of Indutec industrial shredder model PM16/3, equipped with all its original components and accessories, ideal for intensive industrial use in the sectors of recycling, material shredding or industrial processing. ✅ General Features: Model: Indutec PM16/3 Type: Heavy Industrial Shredder, High Power Condition: Excellent condition, complete, with accessories and spare parts Total weight: Approximately 47,500 kg divided into two containers + base Composition of the set (ready to operate): First container – N° 128790 – 13,000 kg Engine: WEG 315 S/M – 150 kW – Gearbox: FLENDER B3 SV 11A – 118 kW – Pump: Neuman & Esser CCS 6-M – 0.25 kW – Neuman & Esser clocks: 1.1, 1.2, 1.3, 1.4 Separator Gasket Lubrication tank Mill flange Spare parts set: blade holder, bevel gear, pendulum shaft, body and heads, bolts Second containe ...

Description MACHINE WITH 5 ELECTRIC AXIS CARTESIAN ROBOT, BELT AND PERIMETER PROTECTIONS EUROMAP 67 INTERFACE

Description MACHINE WITH CARTESIAN ROBOT HILECTRO MOD.V-1300 ID YEAR 2021 WITH THREE ELECTRIC AXES AND TWO PNEUMATIC, UNLOADING BELT AND PROTECTIONS WITH SAFETY CONTROL

Description MACHINE WITH ROBOT HILECTRO MOD.V1300ID EUROMAP67 X-axis: mm 2000 Y-axis: mm 680 Z-axis: mm 1300 VERT motors: brushless gripper rotation: 180 pneumatic wrist rotation: 90 pneumatic maximum capacity: kG 12 CONVEYOR BELT PROTECTIONS WITH INTEGRATED SAFETY DEVICES

We are offering a complete Water-Cooled Induction Leveling System, composed of the following components: 1. Electrical Power Unit - Power Supply: 3 x 400V, 50/60 Hz - Current (In): 50 A - Short-Circuit Current (Icc): 35 kA - Item: 01 - Type: IFC/A-25 (25 kW / 20 kHz) - Year: 2023 2. Inductor Unit - Manufacturer: ATE - Drawing: 239003100_0 - Item: 03 - Year: 2023 - Type: INDUKTOR RECHTS (Right Inductor) 3. Chiller Unit - Manufacturer: M.T.A - Model: TAEevo TECH 051 - Production Year: 2023 - Voltage: 400V / 3Ph / 50 Hz - Power Consumption: 8.8 kW - Current: 10 A - Protection Class: IP54 - Refrigerant: R410A - Charge: 2.088 kg - Global Warming Potential (GWP): 2088 - Cooling Capacity: 32.0 kW (EWT 20°C, LWT 15°C) - Water Flow Rate: 5.5 m³/h - Water Connections: 1 1/4" - Weight: 239 kg Find more here - / Contact us at -

Flake Ice Machine Make: Ice Systems Model: F2 AS 2 TON Flake Ice Machine Built 2018 IN cabinet, with stand

Print heads: 1, max. number of print lines: 5, max. print speed: 278m/min, text storage capacity: 250, max. marking lines: 5, documentation available. On-site inspection is possible.

A flexographic printing, slitting, die-cutting and gluing system with bundle ejector (Flexo Foldergluer) for corrugated board production and processing DY Machinery is available. Processes: Feeding, printing, creasing, slitting, die-cutting, folding, gluing, bundle ejection. Production speed: 220 sheets/min, max. sheet guide X/Y: 1200mm/2750mm, max. printing area X/Y: 1170mm/2700mm, min. sheet dimensions X/Y: 320mm/600mm, total system weight: approx. 42t. 1) Belt feeder with vacuum, dust separator, speed indicator and alignment device. 2) Top-side flexo printing with draw roller transfer, ink stop sensors and automatic cleaning. 3) Creasing and slitting unit with trimming and glue flap knife, slitting knife thickness: 8mm. 4) Rotary punch with polyurethane anvil and soft punching system, punching dimensions: +/-25mm. 5) Downward folding and gluing unit based on VALCO VC 350 AG system. 6) ...

Inverter heat pump. Very good condition. Was used for heating. Closed circuit. Glycol. Serviced. Power approx. 53 kW

Code: 0149 Brand: STEMA - 2BR Model: INSERMATIC CB/JUNIOR 86 Manual drilling and inserting machine for hinges or plates for kitchen, bathroom, custom furniture, panels and various Upright frame with table 1 mt Electropneumatic drilling unit with Hp 2 motor 3000 rpm Drilling head with 3 spindles for hinges Hinge housing pad N° 3 stops placed on table Dust collector complete with bags Foot pedal for start Voltage 400 V - 50 Hz Overall dimensions mm 1000 x 1100 x 1750 h Weight kg 130

Stretch blow moulding machine from EtekISBM Line = Injection stretch blow moulding Stretch blow moulding machine for disposable PET bottles made from PET preform blanksStretch blow moulding machine for production in rotary transfer processManufacturer: ETEK / GF-Industries Type Supra 800 sv 1Serial number: 22000225Year of construction: 2012Power: 90 kWNet connection: 400 volts, 50 HzNet weight approx. 6000 kgas good as new; used

An induction system ITG for heat treatment of workpieces with vertical chain lift system is available. Process: heating/hardening, number of inductors: 2, inductor type: copper coil, cooling: water cooling, connected load: 382kVA, rated current: 552A. Documentation available. An on-site inspection is possible.

Injection moulding machine Sumitomo Demag IntElect 150/520-610, built in 2007 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 150/520-610 Operating hours: 29,125 26,530 Cycle counter 3,562,329

Injection moulding machine Sumitomo Demag IntElect 210/580-1000, built in 2009 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 210/580-1000 Operating hours: 27,297 25,717 Cycle counter 3,450,308

Bluhm Systeme Markoprint Integra One Printing System Markoprint Integra One with HP cartridge technology. The system with its small dimensions of 188 x 80 x 98 mm can be easily installed in or on production plants. The print head reaches top speeds of more than 180 m/min and has IP-65 protection class. The printing system is equipped with a display for data entry as well as changing and checking system settings. Operators can check or change variable print information and settings directly on site on the user-friendly display. Intuitive control is via an i-Logic button. In addition, maintenance statuses can be shown on the display. The Integra One is particularly compact with dimensions of 188 x 80 x 98 mm and was specially developed for system integration. Smart cartridge monitoring Intelligent SmartCard Cartridge Monitoring identifies the current ink type and autom ...

Interroll Rising falling Incline belt conveyor with leading belt GF 4778 (3888+890)-690-580 RA2365 Technical data: Conveyor length (NL): 4778 mm ( 3888 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 4778 (3888+890) Nominal / outside width in mm: 690 Belt width in mm: 580 Driven: YES Engine type:  ...

Interroll Rising falling Incline belt conveyor with leading belt GF 7028 (6138+890)-690-580 RA2366 Technical data: Conveyor length (NL): 7028 mm ( 6138 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 7028 (6138+890) Nominal / outside width in mm: 690 Belt width in mm: 580 Driven: YES Engine type:  ...

Interroll Rising falling Incline belt conveyor with leading belt GF 19782 (810+175+17907+890)-690-580 RA2363 Technical data: Conveyor length (NL): 19782 mm ( 810 + 175 mm arch + 17907 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 19782 (810+175+17907+890) Nominal / outside width in m ...

Interroll Rising falling Incline belt conveyor with leading belt GF (810+175+2800+890)-690-580 RA2362 Technical data: Conveyor length (NL): 4675 mm ( 810 + 175 mm arch + 2800 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 4675 (810+175+2800+890) Nominal / outside width in mm: 690 Belt ...

Reach: 1960mm, payload: 60kg, axes: 6, positional repeatability: +/-0.06mm, path repeatability: +/-0.09mm, base dimensions X/Y: 920mm/640mm, weight: approx. 1040kg, operating hours: 32367h. The Profinet IO device module is missing. Documentation available. An on-site inspection is possible.

Used spiral mixer DIOSNA, type: SP 180 A -in very nice condition- - Including 5 tank cars - Kettle for 180 kg dough or approx. 110 kg flour - With plastic hood and inlet for ingredients - the upper V-belt is NEW - In some cases, the wheels of the tank cars were renewed - Machine and boiler frame repainted - The machine runs very smoothly (a video can be sent) - the hydraulics are in good condition - The machine is perfect for sourdoughs - The machine has been technically completely tested - Condition: very good, ready for immediate use 3 pieces of the 5 boilers have some very fine hairline cracks. In our opinion, however, a repair is not necessary. However, these boilers can also be welded on request. The other 2 boilers are in very good condition and without cracks. We are happy to send you more information and photos. Viewing and test run are possible by arrangement. ...