ye i used for sale

Cutting discs, new, various dimensions. Flat and depressed. Original packaging. List exists. Price â?¬ 1,20 / kg

1 x Francis Shaw model K4 intermix, Machine number: 4549, Original Year of manufacture:1992, Chamber volume: 91 litres, Batch weight: approx 76kg (at 70% F.F. and 1.2 S.G), Hydraulic hopper, Hydraulic drop door with linear actuator, Full unidrive David Brown gearbox - power rating 450kW, ratio 29.065:1 (input speed 1500rpm, output 51rpm), In good condition, but currently without motor or controls. Manuals/drawings available.

Filler/sealer Make: KHS Type: Innofill DR 132/ 24/24 Built: 1996 Power: 50000 Fl./h Filling product: ier Bottle size: 0.5 glass bottle Bottle diameter: 78mm Number of filling valves: 132 Number of locking devices: 24 SV (Alcoa), 24KK ( KHS) Running direction: Left-right Control: Siemens S5 - Fill height adjustment - Cork mill - Extended pre-table - CIP tulips currently still in operation, can be visited, available from 01.03.2020

Capacity: 50.000 bt. / h Currently equipped for 0.25l Vichy / 0.25l Gastro / 0.50l GdB / 0.70l GdB / 0.75l GdB / 0.75l Benelux / 0.75l Gastro Bottles. • Inspection of the mouth sealing surface • Inspection of the side wall (both sides) • Inspection of the thread • Detection of conductive residual liquids • Detection of residual liquids by IR • Diversion of faulty bottles • Diversion of bottles exceeding height and/or width as well as lying bottles Incl. module for detection of impact spots Incl. blower for removal of water drops

Capacity: approx. 30.000 l / h

Capacity: approx. 25,000 l / hr

Capacity: approx. 25,000 l / h

Used Heuft Empty Bottle Inspector InLine IXs reflexx Device No. 2ZG044698 Condition: very good, ready for use at short notice ·       Commissioning 6 May 2012 ·       Upgrade for later integration of additional ground control using X-ray technology ·       Tape control Heuft Synchronous TX ·       Network Heuft Hlan ·       Haylofts two ways discharge with div. Heuft container transport Convejor ·       Troubleshooting Software Wizard ·       Software assistant guided instructions for the different container changes ·       Power max. 46,000 fl./h ·       5 Variety licenses incl. scope of delivery: ·       Belt control Spectrum TX ·       Measuring bridges for inlet control and discharges incl. height connections ·       2 x Discharge Delta K  ...

Used Heuft Glass Empty Bottle Inspector InLine reflexx Device No. 2ZG042943 Condition: very good, ready for use at short notice ·       Original delivery date 12.2011 ·       Power max. 46,000 fl./h ·       Pass direction from left to right ·       Two triggers ·       Secomak blower instead of compressed air ·       Transponder detection for RFID test bottles ·       Discharge monitoring ·       Network Heuft Hlan (Upgrade Optional) ·       Hayt two ways discharge Delta K to the right ·       4 Variety Licenses ·       Tripartite Delta K for band height of 1130 ·       Two fluids for lye detection Not available! ·       inlet control, must be supplemented if necessary ·       Thread edging, must be supplemented if required ·       The documentation is complet ...

PET Empty Bottle Inspector HEUFT InLine TI 60 BFS2-r Device No. 2SG021663 Built: / year of construction: 2006 Output[B/h]: / performance [cont./h]: 36,000 Flow direction of: / moving direction from: Direction: / rejection direction: Installation location: / installation site: In front of the filler • Basic unit: Empty bottle inspector • Inspection: 1.Soil-IN-r • Inspection: Estuary IN-r • Inspection: 1st sidewall IN-r • Inspection: 2nd sidewall IN-r • Inspection: SW double resolution-r • Inspection: Carrying ring/PET-r • Inspection: RefPet abrasion-r • Inspection: RefPet Ventslot-r • Inspection: Stress crack detection-r • Accessories Transport belt: Height adjustable • Residual fluid detection: IR • Height adjustment: for discharge • Cross-adjustment: for discharge • Discharge ...

Machine type TIG inverter welding system gas-cooled DC and AC system Brand Hugong Type Wave 200 D III Supply voltage 1 x 400 Volt = plug 5 / 16 A Adjustment range 5 – 200 amperes Duty cycle 15 % ED at 200 amps 60% ED at 153 amps 100% ED at 118 amps Current adjustment infinitely variable weldable material thickness steel / VA: 5 mm Aluminium: 3 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable compact system version Fuse 16 Ampere Dimensions L x W x H 500 x 240 x 410 mm Weight 20 kg Age 6 months Condition workshop tested as new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG burner SR 26, Flex, 4 mtr. long 1 piece ground cable 1 pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 piece instruction ma ...

The new 19-inch Rack PC SIMATIC IPC847C is equipped with the latest 2010 Intel Core processor technology (Intel Core i). The high computing power and PCI-Express technology make the IPC847C the perfect platform for high-performance applications, such as in measurement technology in test benches or in industrial image processing. The SIMATIC IPC847C also offers maximum system availability, expandability and compactness in 19" IPC technology: - optimal storage space utilization and data security with RAID5 - optional redundant power supply (AC) - Extensive diagnostic and monitoring options - Universal use for industrial workstation and server applications - Variety of integrated interfaces and expansion slots - Lower installation depth for installation in space-saving control cabinets of only 500mm depth The Rack PC is available as a control cabinet device for horizontal and ver ...

Semi-automatic induction sealer for aluminium foils in closures - Closure sizes 15-60mm - Closure sizes 50-120mm

Inv. Num: 5345 Type: Insert 330H 90 Producer: Engel Generated: 2006 Parameters: Clamping force: 340 t Injection capacity: 113 cm3 Screw diameter: 30 mm Facilities: Turntable

industrial robot ABB IRB 2400/16 Type B - M2004, Y.O.M. 2005 - Load capacity: 16 kg - Range working radius: 1550 mm - Control module: IRC5 M2004 - Robot version: IRB 2400/16 Type B - M2004 - Teach Panel: FlexPendant - Remote I/O Unit: DSQC 350A - Total power: 1 kW - Mash. Weight: 800 kg - Space requirement (W x D x H): 0.73 x 0.6 x 1.6 m - Condition: very good - Engine hours: 37095 h details well-maintained robot, ready to use accessories Documentation, all cables

Type: IMAX 520 Working with boneless meat Product width: 520 мм Cycles: 15 to 60 per minute Feed: max. 60 mm Product height: 130÷230 mm Number of needles: 200 (2 х 100), 4 мм Brine pressure: 0,5-4,5 bar Machine charging height: 1170 mm Compressed air: 6bar Voltage: 230/400 V, 50/60 Hz Connection: 10,0 kW ; 23 А Rotary brine filter DF 510 Machine dimensions in mm: Length: approx. 2100 Width: approx. 1350 (about 2500 mm with filter) Height: approx. 2300

Top machine! This machine puts inserts into envelopes Inserter stations (2) safety features double-/missing sheet detection air suckers feed from bottom of pile envelope counter Insert dims 156x244 to 84x114mm envelope dims max 156x244mm min 89x171mm working speed up to 10.000 envelopes/hr variable speed adjustement

Spectrallight Gretag Macbeth Spectralight III uses a patented filtered tungsten halogen daylight source. This means that it contains an even balance of color energy, just like natural daylight. The more even the balance of color energy, the more accurate the light source makes color. This color energy is displayed in a spectral power distribution curve (SPD). If your light source doesn't match the SPD curve for natural daylight, your ability to evaluate color is distorted. That means you could approve color that your customers reject and vice versa! Manufacturer: Gretag Macbeth Type: SPL III Further data: see also photos All information without guarantee

ABB IRB6600 Serie's upper arm extenders and different wrist modules will allow customization to each process. As the robot can bend fully backwards, the working range is greatly extended and the robot fits well into dense production lines. The IRB 6600 is ideal for process applications, regardless of industry. Typical areas can be Spot Welding, Material Handling and machine tending. Model: IRB6600-175/2.55 M2000A Condition: USED Year: 2006 Control Cabin: Not included - works with M2000A Rated Payload: 175kg Access Distance: 2550mm Contents: Manipulator only Shipping: NOT included in the price Payment: Must be made before the delivery, VAT excluded in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Sour ...

IRB6600 Serie's upper arm extenders and different wrist modules will allow customization to each process. As the robot can bend fully backwards, the working range is greatly extended and the robot fits well into dense production lines. The IRB 6600 is ideal for process applications, regardless of industry. Typical areas can be Spot Welding, Material Handling and machine tending. Year: 2006 (Same Year, Orange Colour Available) Cabinet: NOT Included (Works with IRC5 - we can try to find one for you) Teach Pendant: NOT included but we can try to find one for you Signalling & Power Cables: NOT Included but we can try to find them for you Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: ABB's Website)

MBM Commercial Kitchen Technology Germany Flake ice machine MBM Type: ICE 350 IS Stainless steel cladding Coolant: R404a Year of construction 2003 0,800kg Water supply Water drainage With switch box for switching on and off Height: 190cm Width: 125cm Depth: 90cm

platewriter Manufacturer: glunz&jensen Model: ICTP 2400 Pc + rip included year: 2010 Availability: in 2 weeks Defects: no Price: on request

Code: 0555 Brand: STEMA 2 BR Model: INSERMATIC CB/86 - CE Standard Drilling and inserting machine for furniture hinges , kitchens, cabinets, furniture in general - CE Standard Technical data: Drilling unit: Electropneumatic unit with motor Hp 2- 3000 rpm - Works from bottom to top, from under the panel - Drilling head: 3 spindles for hinges - 2 spindles for mounting plates Hinge insertion unit: N°1 single loader Worktable: rubber-coated rollers width 500 mm N° 6 mechanical stop blocks Suction 1 mouth diameter mm 80 Panel clamping: N° 2 vertical pressers Volt 380/50 Compressed air 6 atm Overall dimensions: mm 3600 x 1300 x 1300 h Weight kg 530

DBK David + Baader GMBH Industrial Furnace Electrically heated convection oven Type ITHU 150° Type ITHU Identification number 871126 Year of construction 2006 Usable space/furnace 8,393 m3 Steam room/furnace 11.5 m3 Weight 3000kg Rated voltage 400/230V 50Hz Power supply 21KVA Heating capacity 18 KW Rated current 30 A Pre-fuse 50 A Protection class IP 43 Highest drying temperature 120° exhaust air volume flow/furnace 95 m3/h

DBK David + Baader GMBH Industrial Furnace Electrically heated Convection oven Type ITVU 200° TYPE ITVU Identification number 870233 Year of construction 2006 Usable space 2.8 m3 Steam room 3.9 m3 Weight 850 kg Temperature 200° Rated voltage 400/230V 50Hz Power supply 21 kVA Heating capacity 18 kW Rated current 31A Pre-fuse 50 A Protection class IP 43 Exhaust air volume flow 230 m3/h

internal diameter: 340/440 mm grinding depth: 9999999999999999999999999 mm swing diameter: mm grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.geometrical overh ...

Flake Ice Maker Hoshizaki Ice Maker FM-300AKE-N - 2 pieces Hoshizaki Ice Maker FM-300AKE-N - 1 storage container with two trolleys - 300Kg / 24h per machine - Total 600Kg / 24h External dimensions Complete approx.: 155cm wide 120cm deep 250cm high (incl. Ice Maker)

Platesetter BASF EF III; good condition; cleaned and tested; Format 900x1200mm; pre- and main exposure; Post-exposure; dryer; Radiator. Exposure unit BASF EF III; good condition; cleaned and checked; size 900x1200mm; before and normal exposure; postexposure; dryer; Chiller.

Product number: 2471J TypeI: MAX420 Serial number: 4201 1061 Year of construction: 2006 Needles: 108 pieces of 3 mm Walking beam: 420 mm Advance:50/100 mm Product height: max 140 mm Cycles: 15 to 60 per minute Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 16kW Dimensions: 2300 x 2200 x 2300 mm Including rotating filter

screw size: unbkt mm injection shot weight in Polysterol: unbkt g/PS closing pressure: 100 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hives inserter – APE Year: 1997. Speed: 4.000 bph. Direction: Linear. Model: INSER 2000. Double head. Safety protections. Including vibrating Conveyor

Hives inserter | MONDO&SCAGLIONE Year: 2000 Speed: 10.000 bph Safety protections

Hives inserter APE | Double head Year: 2001 Speed: 6.000 bph Direction: Clockwise Model: INSER 1200 Safety protections

Geneglace F900 Ice generator with dosing unit This unit designed as an optimal solution for cooling products on the production line. The main feature is smooth integration at fish factories with a conveyor processing system. The high capacity generator produces ice and the dosing machine supplies ice flake straight to the fish boxes. Refrigerant: NH3 (Ammonia) Capacity: 52 tons per 24 hours (26 tons on each of 2 drums) Refrigeration power: 130 kW Voltage: 3 x 400 V \ 50 Hz

Automatic injector 216 needles Type: ІМАХ 420 Product width: 420 мм. Cycles: from 15 to 60 Feed max.: 60 mm. Product height: 130÷220 mm Number of needles: 216, 3 mm. Brine pressure: 0,5-4,5 bar Machine charging height: 1150 mm Compressed air min. 6 bar Voltage: 230/400 V, 50/60 Hz Connection: 14,0 kW ; 32А Rotary brine filter: DF 510 Dimensions, mm: Machine length: approx. 2200 Machine width: approx. 1350 (approx. 2200 mm with filter) Machine height: approx. 2300 Weight: 1500 kg.

Automatic injector 300 needles Type: ІМАХ 620 To work with boneless meat Loading width: 620 mm Cycles: from 15 to 60 Loading max.: 60 mm Product height: 130÷220 mm Needles quantity: 300 (2 х 150) , 3,0 mm. El.connection: 400/440 V, 50/60 Hz El.connection value: 16,5 kW ; 32 А Rotating brine filter Machine dimension in mm: Length: approx. 2200 mm Width: approx. 1600 mm (approx. .2800 mm with filter) Height : approx. 2300 mm

For sale is a used, well-preserved Infusomat fm from B/BRAUN with drop sensor, device holder, power cable and new battery PCS 9/23 You will receive a VAT invoice.

Carefusion IVAC PCAM Syringe Pump Painkiller Pump STK 9/23 used, fully functional, immediately ready for use. You will receive a VAT invoice.

Fresenius MCM 550 ST Infusomat with drop sensor valid STK Ready for immediate use You will receive a VAT invoice.

Fresenius Injectomat cp-PS functional You will receive a VAT invoice.

Screw diameter: 30 mm Displacement: 74 cm³Injection weight in polystyrene: 66 g/hp Injection pressure: 2,020 bar Clamping force: 50 t Lights tie bar distance H x V: 420 x 370 mm Tool installation height min.: 200 mm Opening distance: 340 mm CONTROL: NC4 Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 1x Pump drive power: --- Total connection load: 33 kW Total weight: 4,750 kg Dimensions L x W x H: 4.3 x 1.1 x 2.0 m m m m Terms of payment: 100 % before taking over the machine, strictly net

Type: ACE 025L3 NVBP, Flow wolume 11-45 l/min, pressure :7 bar, max akış hızı : 12 gpm( 45 L/dk) BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

Year of construction: 2013 Screw diameter: 60 mm Spec. Spray pressure: 1610 bar Injection volume: 848 cc Injection weight in hp: 800 g Clamping unit: Clamping force: 260 t Size of the clamping plates: 835 x 835 mm Lights tie bar distance: 575 x 575 mm Installation height: 195 mm Opening distance: 405 mm plate spacing: 600 mm Ejector travel: 180 mm Hydr. Drive power: 21 kW Cylinder heating capacity: 16.2 kW General information: Delivery time: Short term Dimensions(m) LxWxH: 6.3 x 1.8 x 2.0 m Weight: 8500 kg

Linco inside / outside washing machine of 16 units C.W. Unique in design , this machine has been developed by Linco to out-perform and surpass all the other machines available. Special adjustable nylon / stainless nozzles enter the bird to ensure thorough inside washing, no possible damage, and a positive opening in the neck cavity of the bird to ensure drainage. Water sprays on the outside of the bird remove any debris or stains left after eviscerating.

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

Inverter heat pumps / chiller air-cooled reversible, Type: Cycnus iHCY 131 PT1+FSH MTA S.p.A. HCYGNUS TECH Inverter iHCY 131 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation up to -15 / -10°C intake temperature. Includes crankcase heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 35.5 Heating water temp. Exit/Entry: 45 / 40°C Volumetric flow m³/h 6.18 Available pump pressure bar: 0.644 Ambient temperature °C +7 Cooling capacity kW 31.8 Cold water temp. Exit/ Entry: 7 / 12°C Volumetric flow m³/h 5.41 Available pump pressure bar: 0.8 Ambient temperature 32 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 16 Max. current (A) 29 St ...

Inverter heat pumps / chiller air-cooled reversible, Type: Cycnus iHCY 131 PT1+FSH MTA S.p.A. HCYGNUS TECH Inverter iHCY 131 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation up to -15 / -10°C intake temperature. Includes crankcase heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 35.5 Heating water temp. Exit/Entry: 45 / 40°C Volumetric flow m³/h 6.18 Available pump pressure bar: 0.644 Ambient temperature °C +7 Cooling capacity kW 31.8 Cold water temp. Exit/ Entry: 7 / 12°C Volumetric flow m³/h 5.41 Available pump pressure bar: 0.8 Ambient temperature 32 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 16 Max. current (A) 29 St ...

Offer: Engel Insert 500V/100 LIM Bj./year 2014 approx. 8000h

Offered are 500 pieces of a 3in1 contactless infrared fiber thermometer - new in original packaging -. These come from an overstock at our customer and are currently offered with an MSRP of € 24.99 each. There are a total of approx. 3420 pieces. The 3in1 contactless infrared fiber thermometers are still in the factory near Leipzig (Saxony). The sale takes place ex works EXW (loading possibility available). If the shipping costs are covered, shipping would also be conceivable. We sell the assets on behalf of our customers. The offer prices are gross prices in EURO ex works. The offers are subject to change, subject to error and subject to any prior sale. In this context, we expressly refer to our terms and conditions. We would also like to point out that we expressly exclude a return, a guarantee and a warranty with regard to the assets offered through us.