129,010 used machines on RESALE, but how to find them? Machine Search
INDRAMAT Permanent Magnet Three-phase Servo Motor
Used bread line GLIMEK -In good bakery condition- - Dough divider GLIEMEK SD-180 with XL funnel - Intermediate oven IPP840-008 - Long caster GLIMEK M0671 - Rounder - Capacity: approx. 1,500 pcs./h The plant has only been running for 10 years and only in the summer season. Out of service since 2017. Viewing and test run are possible by arrangement.
Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Nucleus, servomotor -Type: NUDrive MP85 10A Bgr2 R Rev2 IP64 -Item No.: DS851028 -Shaft: Ø 14 x 35 mm -Number: 2 servo motors available -Price: per piece -Dimensions: 200/85/H110 mm -Weight: 3.5 kg/pc.
Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Nucleus, servomotor -Type: NUDrive MP42 2A Size 42 R Rev.2 IP64 -Item No.: DS421106 -Shaft: Ø 14 x 35 mm -Number: 2 servo motors available -Price: per piece -Dimensions: 134/42/H56 mm -Weight: 0.6 kg/pc.
Berger Lahr Servomotor IFS93/2DP0-DS/3DI-I54/O-001RPP41 4.5Nm 36VDC Imax 5A 14mm shaft. If desired, I can also pull the belt drive from the shaft.
Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head, tap wrench -Tap cutting set: 47-piece / internal and external threads -Size: M3 to M20 -Individual components: see photos -Dimensions: 500/420/H85 mm -Weight: 9.1 kg
Warming cabinet, plate warmer, stainless steel warming cabinet -Manufacturer: GGG Gastro Großküchentechnik, stainless steel warming cabinet -Interior dimensions: 1225/620/H580 mm with adjustable intermediate shelf -Temperature range: 30°C and 90°C, continuously adjustable -Dimensions: 1400/730/H850 mm -Weight: 72 kg
Safety relay, safety control unit, emergency stop switch, switching device, safety sensor, safety switching device, evaluation unit -Manufacturer: ifm electronic, AS-Interface -Type: AC2267 -Number: 17 modules available -Price: per piece -Dimensions: 110/25/H105 mm -Weight: 0.1 kg/pc.
Display, display module, display panel, multifunction counter, controller, bidirectional counter, preset counter, digital counter -Manufacturer: IVO, Multifunction Digital Counter with 8-digit LED Display -Type: NE212.012AXA2 -Item No.: 301074 -Dimensions: 115/75/H70 mm -Weight: 0.5 kg
Lightweight robot cobot KUKA iiwa 14 R820 sunrise cabinet new/OVP Year of construction: 12/2014 Number of axles: 7 Max. load capacity: 14 kg Max. working range: approx. 820 mm Scope of delivery : Robot,Controller,Cable,Teach-Panel 2 weeks start-up guarantee.No further warranty In addition, spare parts are always available from stock. Robot is fully functional and can be viewed Auction amount is ex works Free loading The indicated retail price is exclusive of the statutory VAT of 19%. Shipping costs abroad on request. Please enter your country, city and postal code.
Display, display module, display panel, multifunction counter, controller, bidirectional counter, preset counter, digital counter -Manufacturer: IVO, Multifunction Digital Counter with 6-digit LED Display -Type: N 214.002AX01 -Item No.: 300949 -Dimensions: 130/110/H50 mm -Weight: 0.4 kg
SECOND-HAND 5 AXIS BALESTRINI IDEA 2 – CE RULES - X axis 1800 mm - Y axis 1600 mm - Z axis 700 mm - 4 x 7.5 air cooled Colombo spindles - NUM control. - 2 Pumps 75 mc/h Rietschle - YEAR 2007 - complete with cabin
Transnorm belt curve conveyor 30°-800-700 IR900 right RA2256 Technical data: Manufacturer: Transnorm Condition: good (used) Conveying angle: 30° Nominal/outer width (NB): 800 mm Belt width (GB): 700 mm Inner radius (IR): 900 mm Overall height (BH): 210 mm Motor height (MH): 450 mm Motor type: SEW geared motor, SA42 DT71D-4 Electrical data: 380-500 V, 0.37 kW Conveying speed: please contact us Scope of delivery: without supports (please enquire if required) Optional: Supports Side guides Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1992 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 30° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte ...
PLC control, electronic module, control unit, Promodule, controller, compact controller, PLC module, controller -Manufacturer: Inovance, Programmable Logic Controller (PLC) -Type:H 1U-1614MR-XP -Transport dimensions: 110/90/H90 mm -Weight: 0.5 kg
Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, touch screen panel, Simatic Multi Panel, touch multi panel, touch screen -Manufacturer: Inovance, Touchscreen Panel -Type: IT6000 IT6070E -Voltage: 24VDC -Dimensions: 200/55/H145 mm -Weight: 0.7 kg
Key data: 550 mm, 1500 mm
Rolling mill 60" See attachment for details!
ISHIDA MULTIHEAD WEIGHER MODEL: CCW-RV-214W-16-50-WP-SLD APRIL 2021 SINGLE PHASE POWER VERY GOOD CONDITION TOUCH SCREEN 4 AVAILABLE
Waste oil collection container -Container: Ø 660 x 1250 mm -Container: tiltable -Weight: 30 kg
Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V -Price: per piece -Quantity: 17 pieces available -Weight: 2 kg
Control amplifier, servo motor control -DTT 10/330 V -9.2 V/1300 -Weight: 6 kg
Control amplifier, servo motor control -ETT 10/2x160 V -9.0 V/1500 -Weight: 12 kg
Key data: 50 mm, 2000 1/min
Solid bench boring mill of the brand Stanko-Import, model 2H125 Stanko import Type: 2H125 Year of construction approx. 1975 massive rod drill with MK4 mount in good condition. Dimensions: L860 x W850 x H2400 Weight approx.: 1050 kg Motor 2,2Kw 380V Drilling depth gauge Automatic threading (RE-LI)up to M24 Drehz. 45 -2000 in 12 stages Feed 0.1-1.6 / Umdr.in 9 levels Projection 200mm Adjustment ranges: quill stroke 280mm Drill head 170mm Table 270mm, 400x400 The machine can be viewed at any time. On-site loading can be easily carried out with a forklift. Transport possible throughout Germany via freight forwarder.
Key data: 16 mm, 275 mm, 160 mm
Solid Inratirea Column Drilling Machine, Type G-16 Ready to use. technically flawless, except for the cover of the motor fan (Replacement can be provided with purchase) Details: Machine Type: Column Drilling Machine Make: Infratirea Type: G16 Year of construction: 1975 Control Type: Conventional Country of origin: Romania Freight base: from the Neubrandenburg location, freely loaded Location: 17034 Neubrandenburg Price: € 1650,00 net Technical details Drilling capacity in steel (diameter): 16 mm Projection: 275 mm Drilling stroke: 160 mm Spindle speeds - infinitely variable: 150 - 2360 / 9 step rpm Spindle holder MK: 3 Distance spindle/table max.: max: 580 / min: 100 mm Feed rate: 0.10 - 0.16 - 0.25 - 0.40 mm/rev Table clamping surface: 300 x 400 mm Table adjustable: vertical 360 mm Table swivel approx.: rotatable 360° Clamping surface of the base p ...
Data light barrier, reflective light barrier, light barrier -12-30 V DC Price: per piece Quantity: 5 available -Weight: 2 kg
Reflective light barrier, light barrier -35-250 V AC 500 mA Price: per piece -Quantity: 2 available -Weight: 0.5 kg
Reflective light barrier, light barrier -10-55 V DC 250 mA Price: per piece -Quantity: 4 available -Weight: 0.2 kg
Reflective light barrier, light barrier -11-55 V DC 250 mA Price: per piece -Quantity: 14 available (1 without bracket and screws) -Weight: 0.3 kg
Reflective light barrier, light barrier -11-36 V DC Price: per piece -Quantity: 3 available -Weight: 0.3 kg
Description: Type : Oil Transformer Variation : Hermetic Make : CG Power System IRELAND LTD. Year of construction : 2016 Condition : New Nominal power : 3200 KVA Medium voltage : 22 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Groupset : Dyn 5 Frequency : 50 Hz Cooling Type : KNAN Total weight : 7366 Kg Oil weight : 1760 Kg Mineral OIL Elster Length: Width: Height: Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery . Available Mon to Sat 8 a.m. to 10 p.m.
Reflective light barrier, light barrier -11-30 V DC Price: per piece -Quantity: 50x available -Weight: 0.7 kg
Reflective light barrier, light barrier -10-30 V DC 100 mA -Range: 20-130mm Price: per piece -Quantity: 4x Available -Weight: 0.2 kg
Mobile fully automatic vacuum chamber machine suitable for vacuum packing goods in solid and liquid form.
Reflective light barrier, light barrier -2x: OA5108 -12x: OA5106 -3x: OS5031/OSP -2x: OS5018 -3x: OA5201 -1x: OL5045 -1x: OU5034 -1x: OT5203 -From: Industrial dismantling -10-30 V DC Price: per piece -Weight: 0.5 kg
geared motor, electric motor -Speed: 98 rpm -Power: 0.37 kW -Design: B5 angle -Hollow shaft diameter: Ø 15 mm -Protection class: IP 55 -Weight: 10 kg
geared motor, electric motor -Speed: 98 rpm -Power: 0.37 kW -Design: B5 angle -Hollow shaft diameter: Ø 15 mm -Protection class: IP 55 -Weight: 10 kg
geared motor, electric motor -Speed: 98 rpm -Power: 0.37 kW -Design: B5 angle -Hollow shaft diameter: Ø 15 mm -Protection class: IP 55 -Weight: 10 kg
geared motor, electric motor -Speed: 98 rpm -Power: 0.37 kW -Design: B5 angle -Hollow shaft diameter: Ø 15 mm -Protection class: IP 55 -Weight: 10 kg
Qty. 1 Second-hand log homogenising furnace Mfc.: Rackwitz Industrieanlagne GmbH Built: 2009 Annual production: 50.000 tons mix Furnace charge max.: 25 tons Furnace performance: 6 - 7 t/h of 10 LOG Logs diameter: 103 mm - 405 mm Logs length: 7,000 – 7,300 mm Type: Cross circular Furnace cross circulator 3 pieces Heating zone Furnace Dimensions: 30.300 mm x 3.400 mm x 11.000 mm – L x W x H
geared motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Design: B5 -Hollow shaft diameter: Ø 25 mm -Protection class: IP 54 -Weight: 14 kg
Drilling capacity steel/GG: 23 mm Spindle holder: 3 MK Projection: 275 mm Table size: 300 x 400 mm Quill stroke: 90 mm Spindle speeds: 100 - 1180 rpm Feeds: 0.1/0.6/0.25 mm Drive motor: 380 V, 1.25/2.15 kW Dimensions: 850 x 400 x 1770 mm Weight: 280 kg
Key data: 400 mm, 900 mm
available 35" Mill on Baseframe more details in attached description!
geared motor, electric motor -Speed: approx. 98 rpm -Power: 0.37 kW -Design: B5 angle -Hollow shaft diameter: Ø 15 mm -Protection class: IP 54 -Weight: 10 kg
Geared motor, electric motor, electric geared motor -Speed: 18.5 rpm -Power: 0.37 kW -Design: B5 angle -Shaft diameter: 19 mm -Protection class: IP 54 -Dimensions: 350/170/H210 mm -Weight: 10 kg
Geared motor, electric motor, electric geared motor -Speed: 186.6 rpm -Power: 0.18 kW -Design: B5 angle -Shaft diameter: 19 mm -Protection class: IP 54 -Weight: 10 kg
Brand: Direct Colour Solutions Model: DJ 1800S Printer, 6" IR2 INK Year of production: 2020 Equipment: Stock Base Dongle, ADA Module 1800S IR2 LCF, EZCyl, 1800S, IR2 Ink, 1800 Vac Table Kit, 13", 220V
Illig RDM75K age 1998, refurbished in 2019, with Siemens S5 PLC Controls, used only for ca. 50,000 hrs ELAU B1 Display with Touchpad controls Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 750 mm Max. Indexing length 480 mm Top & Lower heaters, total connected load top & bottom heaters 111.3 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 700 x 450 mm Hydraulic Cylinder Plug Assist with Bosch Rexroth Hydraulic Power Pack, completely Overhauled in 2019 Max. Part height 150 mm Max. Mold closing force 25,000 daN Auto Lubrication system Siemens S5 PLC Controls New original ILLIG/ RITTAL Control Cabinet Cooling System added in May-2023.
ILLIG PLS75B Inline Counter/ Stacker, with Hole Punch Station, age 2006 used Inline with ILLIG RDM75K ! Max. Stacking Area: 750 x 350 mm Min Height of formed product: 25 mm Max. height of Formed Product: 150 mm Min. dia. of product : Ø 40 mm Max. dia. of Product: Ø 150 mm Max. length of Product Stack: 730 mm Output rate of Product Stacks: 1200 Stacks/ hr Rotating Head to neatly remove Products from the Thermoformer Mold Inline Hole Punch Station Inline Counter Stacker Station Compressed Air: 0.2 L at 6 bar, approximately Total Drive Rating: 19 kW Electrical specifications: 400 V, 3 phase, 50Hz (N/ PE) Cross delivery conveyor for counted cups. All Motors are Indramat Servo Motors Siemens SIMATIC TOUCH LED Operator Control Panel with Touch Pad Controls Siemens S7 PLC Controls Delivers Counted Cups/ Containers at Right Angles to machine direction New (Feb- ...
From insolvency: Erlo Iberdrill AZ 34 Year of construction 2020 Infinitely variable speeds per potentiometer 80-2010rpm automatic feed 0.1--0.2--0.3 Digital speed display Coolant pump Tapping function with foot switch Work light Pinol stroke 150mm Projection 300mm Recording MK 4 Drill chuck Röhm Supra 3-16mm Table clamping surface 330x320mm Height of machine 1930mm Weight approx. 350kg 3KW Power 380 volts
Key data: 90 m³/min, 3 , 20
Ingersoll-Rand Oil Free Screw Air Compressor L90I A3.5 -14-16-50 pressure generators from 2014, complete (closed module) 1 available Class 0, 1,190 m3/h, 7 – 10 bar. Compressor Ingersoll-Rand L90I Manufacturer: Ingersoll-Rand Model: L90I A3.5 -14-16-50 Type: oil-free screw compr. Class 0 Serial Number: UCV1002567 Volume flow rate [m3/h]: 1,190 Output pressure [bar]: 7 – 10 Power [kW]: 90 Year of construction: 2014 Running hours [h]: – Weight [kg]: 2.210 Dimensions LxWxH [cm]: 310x160x235
maximum number of results exceeded
please refine your search
