ye i used for sale

Inductive sensor, electronics sensor -Manufacturer: IFM, inductive sensor -Type: IGM207 -Number: 2x sensors available -Price: per piece -Dimension rolled up: 150/150/H20 mm -Weight: 0.3 kg/piece

– 36 needles – Completely factory refurbished – With 1 year warranty.

Automatic injector INJECT STAR BI 124/248 needles. 2006 manufactured. The machine is complete with a rotary filtering system. Fully factory refurbished with 1 year warranty.

Injector Inject Star PI 75 Tape width: 61.5cm Machine dimension in cm: Width: 100 Lenght:210 Height: 228 Delivery time: 30 working days after advanced payment

Interface converter, converter module -Type: i-7520 Price: per piece -Quantity: 2 available -Weight: 0.5 kg

Inductive sensor, electronics sensor -Manufacturer: IFM -Type: IF5227 IFB3002-BPKG/MS -Connector: M12 x 1 -Switching distance: 2 mm -Number: 2x available -Price: per piece -Weight: 10 g

Interbus-ST bus terminal -Connection: 24 V DC -9 pin -Consists of: Terminal part with screw connection and module electronics

Inductive sensor, electronic sensor Manufacturer: IFM -Product Type: IGA2008-FRKG/US-100-IRF -Weight: 60 g

Inductive sensor, electronics sensor -Type: IFRM 08P17A1/S35L -Number: 2x available -Price: per piece -Weight: 15 g

Inductive sensor, electronics sensor -Manufacturer: IFM -Product type: IEA2002-FROG/US-100-IRF -Weight: 25 g

Platesetter BASF EF III; good condition; cleaned and tested; Format 900x1200mm; pre- and main exposure; Post-exposure; dryer; Radiator. Exposure unit BASF EF III; good condition; cleaned and checked; size 900x1200mm; before and normal exposure; postexposure; dryer; Chiller.

Inductive sensor, electronics sensor -M50 x 1.5 -Type: IN 50 60 40 -Number: 2x available -Price: per piece -Weight: 300 g

proximity switch -Manufacturer: IPF Electronic -Product type: IN 40 60 40 -Number: 37x available -Price: per piece -Weight: 300 g

Inductive sensor, electronics sensor -Type: IFR 08.26.15/L -Number: 2x available -Price: per piece -Weight: 35 g

Automatic injector 216 needles Type: ІМАХ 420 Product width: 420 мм. Cycles: from 15 to 60 Feed max.: 60 mm. Product height: 130÷220 mm Number of needles: 216, 3 mm. Brine pressure: 0,5-4,5 bar Machine charging height: 1150 mm Compressed air min. 6 bar Voltage: 230/400 V, 50/60 Hz Connection: 14,0 kW ; 32А Rotary brine filter: DF 510 Dimensions, mm: Machine length: approx. 2200 Machine width: approx. 1350 (approx. 2200 mm with filter) Machine height: approx. 2300 Weight: 1500 kg.

Automatic injector 300 needles Type: ІМАХ 620 To work with boneless meat Loading width: 620 mm Cycles: from 15 to 60 Loading max.: 60 mm Product height: 130÷220 mm Needles quantity: 300 (2 х 150) , 3,0 mm. El.connection: 400/440 V, 50/60 Hz El.connection value: 16,5 kW ; 32 А Rotating brine filter Machine dimension in mm: Length: approx. 2200 mm Width: approx. 1600 mm (approx. .2800 mm with filter) Height : approx. 2300 mm

Inductive sensor, electronics sensor -Ø: 6.5 -Connector: M8 -Connection: 10-30 V DC -PNP -36 mm: long -Switching distance: 2 mm -Stainless -Number: 2x available -Price: per piece -Weight: 5 g

Inductive sensor, electronics sensor -Connector: M8 x 1 -Connection: 10-30 V DC -45 mm: long -Switching distance: 3 mm -Number: 2 pieces -Price: complete -Weight: 30 g

Ring sensor, hose sensor -Ring diameter: 10.1mm -Operating voltage: 10 - 30 V -Switching output: 200 mA, pnp -Protection class: IP 67 -Plug: M12 4-pin -Dimensions: 90/35/H55 mm -Weight: 70 g

Injector Inject Star Type: PI 36 Number of needles: 36 Needle diameter: 4 mm Passage mechanism type: Gear rack rail Electric power: 3kW Machine dimension in cm: 50x160x200cm

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...

Interface module, PLC control -Type: PAAS E70200 -Number: 9x available -Price: per package -Weight: 0.2 kg

InterBus-S, bus coupler, bus terminal, bus terminal -Manufacturer: Phoenix Contact, Interbus-S Bus Terminal -Type: IBS ST 24 BKM-T Ord.No. 27 50 154 -Price: per piece -Number: 17 modules available -Dimensions: 115/45/H115 mm -Weight: 0.2 kg/pc.

Inductive sensor, electronic sensor Manufacturer: IPF Product type: IB 160100 -Quantity: 2 available Price: per piece -Weight: 0.1 kg

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

Internal micrometers, micrometer screw, internal diameter, internal precision measuring device, cylinder gauge, -Measuring range: 35-60mm -Dimensions: 115/450/H60 mm -Weight 1.6kg

Manual pneumatic press Make IML Model M4 Year 2015 ? Details for all kinds of pressing jobs, for instance eyelets, thumbhole rings, corner attaching, works solely on compressed air Condition show room machine Available Direct

Inductive sensor, electronic sensor, safety switch, inductive proximity switch -Manufacturer: efector, Inductive sensor proximity switch, unused, original packaging -Product Type: IIAE 2010 SFROG -Quantity: 1 sensor available -Cardboard dimensions: 135/65/H45 mm -Weight: 0.1 kg/carton

Dionex ICS 90 Ion Chromatograph, Ion chromatograph with conductivity measuring cell, Suppressor technology, Pump: Flow rate 0.5 – 4.5 mL/min Detector range: 0-500 μS or 0-10 000 μS (selectable) DS 55 Detection stabilizer, Ion Pac AG 23/4 x 50 mm Gurad, Dionex 4 x 250 mm Analytical Connectors: USB and TTL

Budde roller curve right or left 90° with pass through 2955-670-620 IR795 RA1687 Make: Budde Running direction: 90° right running/ left running Roll width (RB): 620 mm conical, plastic coating Nominal/external width (NB): 670 mm Inner radius (IR): 795 mm length: 295mm Height frame: 125 Height including motor: 380 currently set to a height of 700 Height adjustable Roll gap: 75-120 motor MOVI-Mot 3x300-500V 0,37kW 1400 rpm max Gear motor: SEW R17 DRS71S4/MM03 Conveying speed: freely adjustable between 0,11 and 0,7 m/s with frequency converter Scope of delivery: with 3adjustable supports, 3 Light Beam and a push button Features: condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 670 Roll width in mm: 620 angle: 90° Driven: YES scope of delivery: 3x Stützen, 3x Lichtschranken, 1x Rollentaster For individual, expert advice, simply get in touch with  ...

Gebhardt roller curve conveyor 45° 610-550 with inclined inlet 45° RA1279 The Gebhardt roller curve is from 2007 and in a good (used) condition. It has an engine of the brand SEW. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 010.05.1 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 45° Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.35 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 45 kg Scope of delivery: without supports and side guide (if necessary please enquiries) Optional Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment  ...

Camera-based code readers, uEye camera, industrial camera -Manufacturer: Innolas, Industrial camera USB2.0 uEye camera 1/1.8 CCD -Type: UI-2250SE-M-GL -Item No.: AB 0010.1.10410.23 -Cardboard dimensions: 100/90/H60 mm -Weight: 0.2 kg

Product number: 2829 Type: IMAX620 Serial number: 620.3023.03 Year of construction: 2003 Belt width: walking beam, 620 mm Needles: 2 x 150 pcs, 3 mm Product height: max 200 mm Speed: 15 - 60 cycles/min. Advance: 50 / 100 mm Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 16.5kW Dimensions: 2150 x 1600 x 2350 mm For boneless and bone-in products Including tool trolley Schröder rotating filter Type: DF510 Serial number: 634-11 Year of construction: 2011 Power: 3 x 400V, 50Hz, 0.22kW Dimensions: 1000 x 2650 x 1350 mm Schröder tube heat exchanger Type: RWT Serial number: RWT-5622-13 Dimensions: 400 x 1700 x 500 mm

Inductive sensor, electronic sensor, proximity switch, magnetic sensor, magnetic safety sensor, magnetic field sensor, cylinder sensor -Manufacturer:Ipf Electronic, magnetic field sensor unused Ovp -Type: MZ 07 21 A4 -Dimensions box: 125/80/H25 mm -Weight: 0.1 kg

Inductive sensor, electronic sensor, proximity switch, magnetic sensor, magnetic safety sensor, magnetic field sensor, cylinder sensor -Manufacturer:Ipf Electronic, magnetic field sensor unused Ovp -Type: IA 08 01 00 -Dimensions box: 100/75/H10 mm -Weight: 0.1 kg

Inductive sensor, electronic sensor, proximity switch, magnetic sensor, magnetic safety sensor, magnetic field sensor, cylinder sensor -Manufacturer: ifm, Inductive sensor proximity switch OVP -Type: IEA3002BHBPKG/IE5260 -Box dimensions: 95/65/H30 mm -Weight: 0.1 kg

Inductive sensor, electronic sensor, proximity switch, magnetic sensor, magnetic safety sensor, magnetic field sensor, cylinder sensor -Manufacturer:Ipf Electronic, magnetic field sensor unused Ovp -Type: B 12 01 04 -Dimensions box: 125/80/H25 mm -Weight: 0.1 kg

Position computer, computer, control unit, robot controller, controller, CNC controller -Manufacturer: Nucleus, Industrial PC DP3 ECO -Item No.: FE11002 -Number: 10x industrial PCs available -Price/Distribution: per piece -Transport dimensions: 200/115/H50 mm -Weight: 0.6 kg/pc.

Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, input module -Manufacturer: ifm, Input module -Type: AL2401 -Number: 27 modules available -Price: per piece -Dimensions: 165/60/H30 mm -Weight: 0.4 kg/pc.

Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, IO-Link input module -Manufacturer: ifm, IO-Link input module -Type: AL1102 -Number: 7 modules available -Price: per piece -Dimensions: 210/60/H35 mm -Weight: 0.4 kg/pc.

Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, IO-Link input module -Manufacturer: ifm, IO-Link input module -Type: AL2400 -Number: 16 modules available -Price: per piece -Dimensions: 130/60/H30 mm -Weight: 0.3 kg/pc.

TGW curves roller conveyors 45° left Order no. 150072 Item 03.0721 year of manufacture: 2012- working width: 345 mm plastic rollers working width: 400 mm metal rollers total width: 480 mm inner radius: 1050 mm speed: 0.45 m / sec lateral guide on both sides Rollers: conical plastic molded rollers: Metal Optional: 3 supports Shipping dimensions: Lxwxh 2200 x 800 x 400 mm: 90 kg Features: Running direction: LEFT Construction year: 2012 condition: very good (used) Nominal / outside width in mm: 480 Roll width in mm: 345 angle: 45° Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,45 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf v ...

Ring sensor, hose sensor, light barrier, ring light barrier, frame light barrier, inductive ring sensor -Manufacturer: ifm, Inductive ring sensor -Type: I7R201 -Inner diameter: 10.1 mm -Voltage: 10...35 V DC -Quantity: 1 sensor available -Dimensions: 74/35/H20 mm -Weight: 0.1 kg

Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, input module -Manufacturer: ifm, Input module -Type: AL1402 -Number: 1 module available -Dimensions: 205/60/H35 mm -Weight: 0.5 kg/pc.

IBS bus terminal -Interbus ST bus terminal: 24 V DC with 8-pin mini-Combicon connector -consisting of: terminal block with screw connection and module electronics -Number: 19 modules available -Price: per piece -Dimensions: 115/45/H115 mm -Weight: 0.2 kg/pc.

Siemens 6AG4140-3BC04-0PA0 SIMATIC IPC427D (Microbox PC) HD graphic onboard 2x10/100/1000 Mbps Ethernet RJ45 4xUSB V3.0 (high current) PCIe (optional) 24 V DC power supply Core I3-3217UE 2x Gbit Ethernet (IE/PN) DIN rail mounting 4 GB 1x RS-232 without PCIE WIN Embedded Standard 7 32-bit Replaceable without drive SSD 240 GB Standard (MLC) without SIMATIC software New, original sealed box

Digital input device, Interbus -IBS Rl 24 Di 16/8-LK-2MBD -Weight: 1.5 kg

Manufacturer: INOTEC Type: 175 for engines 75 D , 90 D Lug ring long continuous groove for Mikrocutter INOTEC 175 - NEW Product Code : V500663-1 / 175-0020019 Position 21 of the drawing Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone 0048/33 812 58 60 fax. 0048/33 812 58 36

Thermal imaging camera Infrared camera Brand: Infratec Type: PIR uc With suitcase

Inductive sensor, electronic sensor Manufacturer: IFM -Product Type: IF5345 (IF-3004-BPKG) -Quantity: 4x Available Price: per piece -Weight: 0.2 kg