127,589 used machines on RESALE, but how to find them? Machine Search
diameter: 15 mm length: 800 mm = bar loading and de-loading magazine for bars up to 15 mmø, bar length 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used Nail Box (Loose Nails) for Pallet Making Machine; Tilt function for loose nails for separation into the nailing machine (feeding) to the nail guns; Pallet production; functional, functional. not cleaned, not refurbished. Dimensions: 580x810mm Overall width: 760mm Total height: 710 mm Shipping by freight forwarder possible Nail Box IMH Machinery AB nailing box for IMH Machinery AB pallet IMH Machinery AB Year of manufacture 2004 Nail box for IMH pallet nailing machines. Sold in used condition. Dismantled ready for use. Dimensions of the box: 580mm x 810 mm Overall width: 760 mm Total height (not extended): 710 mm Shipping possible with forwarding agent. Asking price: 3250 EUR Nail box for IMH Machinery AB (Pallet production machine) used conditions, ready to work dimensions and condition: see pictures. dispatch / freight possible.
; Gross weight [kg]: 4175; Engine: FPT CURSOR13TE3A.S551; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 580
We sell 1 x IBM DS8910, 5333-994 disk storage system In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all ...
We sell 4 x IBM FS7300 NVMe flash systems In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all these manuf ...
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 straight turning atchm. - working travel: . mm turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We sell (We also have available another 3907-ZR1 z14 system with 32GB only.) IBM Mainframe z14ZR1 : 3907-ZR1 IBM z14 1 0019 Manage FW Suite 1 0033 Service Docs Optional Print 1 0083 HMC Table 1 0148 HMC Table Top Keybd/Monitor/Mouse 2 0173 PCIe fanout Gen3 6 0174 Fanout Airflow PCIe 1 0200 Model ZR1 Air Cooled 1 0236 France #189 2 0401 PCIe Interconnect Gen3 1 0426 OSA-Express6S 1000BASE-T 1 0427 FICON Express16S+ LX 4 0622 Switchable PDU 2 0623 Ethernet Switch 1 0638 CPC Drawer Max4 4 0641 CPC PSU 2 0893 Crypto Express6S 1 1079 CP-A 1 1158 1-Way Processor A01 1 1341 A01 Capacity Marker 1 3100 Lift Tool Kit 1 3101 Extension Ladder 1 3539 64 GB Memory 1 3863 CPACF Enablement 1 4001 PCIe+ I/O Drawer 1 7919 Bottom Exit Cabling 4 7943 32A/250V LSZH Cord 1 9883 19in Rack In most cases, the entire lot can only be handed over in its entirety. More informatio ...
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 straight turning atchm. - working travel: . mm turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar type: 6.32HS-4.4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 mm y-travel: 700 mm z-travel: 630 mm Control: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mm Table load: 400 kg number of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar type: 6.26HS-4.4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 25 mm turning speeds: 5750 U/min Rest: 4 turret head: 8 thread cutting attachment: bar loader: LNZ Hydrobar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Length: 2700 mm Width: 770 mm Height: 1250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 36 KW, 50 kVA, 230 V
30 months warranty Stamford Alternator ComAp Control Contact us directly now! +49 176 82370794 Power Generator Specifications: Model No.: EQ-I5048 Prime Rating: 50 kVA / 48 kW Standby Rating: 55 kVA / 53 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: NEF45AM2 Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression Ratio: 17.5:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2430 mm Width: 1056 mm Height: 1700 mm Weight open: 1040 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electr ...
Key data: 24 KW, 30 kVA, 230 V
30 months warranty WEG Alternator DEIF Control System Power Generator Specifications: Model No.: EQ-I3024 Prime Rating: 30 kVA / 24 kW Standby Rating: 33 kVA / 26.4 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: S8000 AM1 Bore x Stroke (mm): 99 x 104 Displacement (L): 3.2 Compression ratio: 17:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2220 mm Width: 960 mm Height: 1258 mm Weight open: 945 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-coated, welded steel chass ...
Key data: 36 KW, 45 kVA, 230 V
30-month manufacturer's warranty Alternator by Stamford/Leroy Somer/WEG Control of ComAp/DEIF/DSE All original parts from the EU. Contact us directly at +49 176 82370794 Power Generator Specifications: Model No.: EQ-I4536 Prime Rating: 45 kVA / 36 kW Standby Rating: 50 kVA / 40 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: NEF45AM1A Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression Ratio: 17.5:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2220 mm Width: 960 mm Height: 1258 mm Weight open: 1045 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain ...
bore capacity in steel (diameter): 23 / 28 mm throat: 260 mm bore stroke: 120 mm tool taper: MK 3 table-size: 500 x 350 mm column diameter: 100 mm total power requirement: 1,3 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 800 x 600 x 1750 mm Defective feed! Right-left rotation stepless speed adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 0 kW tool adaptor: 0 total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
optical angel measuring unit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 0 kW volt: 0 V ampere: 0 A Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 0 kW volt: 0 V ampere: 0 A Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 440 mm turning length: 1500 mm control: C 200 Tool changer: 16 3 jaw chuck Forckrath: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine type: Tumbler Manufacturer: Inject Star Model: Tumbler 2200 liter Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: 170x285x190cm Electrical power: 4.5kW
Vertical tank made of 316 stainless steel by TM IBÉRICA with a total capacity of 800 liters. Top bottom klopper with off-center flange with agitation, man's mouth and flange connections. Body with visual level. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker TM IBERIAN Model TK-409 Guy DISPENSER Material Stainless steel 316 Year of manufacture 1996 Working pressure on the body: 2 bar Specifications: Volume 800 liters total Background type Klopper Type of agitation 4-blade propeller Agitation motor 0.75 kW - 1.385 rpm Envelope 4 legs Lower bottom tubulatures x1 Man's mouth x1 Breaker x1 Outer diameter body 930 rpm Body height 1000 mm Body height + backgrounds (TOTAL: 3300 mm)
The JMC 150 has a mechanically adjustable hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. The JMC 150 is a tabletop unit for easy handling. Manufacturer: Mc Intyre Knife length: 150 mm Measuring opening: 105 mm Cutting capacity: 25 tons Round iron ST 37: 25 mm diameter Number of strokes at 1/4 aperture: 20 / min Number of strokes at 1/2 opening: 12 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal
JMC 900 alligator shears (new machine) The JMC 900 has a hydraulic hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Out of stock Delivery time: On request Manufacturer: Mc Intyre Knife length: 920 mm Measuring opening: 473 mm Cutting capacity: 233 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 aperture: 26 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 3200 x 1030 x 1800 mm Weight: 4400 kg Drive: 18.5 kw / 400 V + 1.5 kw electric motor cooler Operation: Foot pedal
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm
Three Roll Calender Manufacturer Iddon Bros. ‘I’ shape stack vertical Roll width 54” (1350mm) x 22” (550mm) diam. Even speed Rotary joints for steam heated rolls for water cooling Electrical speed controls with electric autostop Motorised roll stack at the end of the Calender Complete with gearbox, 45kW motor and starter panel The Calendar runs well and goes down to .8mm thick The Calender is mounted on a one-piece fabricated bed plate
Calderin tank with a capacity of 500 liters manufactured by IBAIONDO. General characteristics: Maker IBAIONDO Year of manufacture 2014 Design and working conditions: Air or water Volume: 500 liters Temperatures: -10/+100 ºC Maximum pressure: 10 bar Test pressure: 15 bar
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm
Tank made of 316L stainless steel with a capacity of 400 liters. Top bottom klopper welded to the body with two tubulatures with flange. Two tubulatures with flange on the sides for visual level placement. Bottom klopper welded to the body with flange for discharge from the tank. Mounted on 2 posters. General characteristics: Maker STAINLESS STEEL BOILERMAKING Material Stainless steel 316L Year of manufacture 2000 Specifications: Volume 400 l approx. Background type Klopper Envelope 2 posters Outer diameter body 614 mm Body height 1500 mm Body height + backgrounds (total: 2200 mm)
Boiler tank made of iron by INDUSTRIAS IBAIONDO. Air charge pressure: 0 bar Maximum temperature: 40 ºC General characteristics: Maker INDUSTRY IBAIONDO Guy Conventional hydropneumatic accumulator Material Iron
Pendulum circular saw Irion with roller conveyor Cutting height 100 mm Roller conveyor left 2m Roller conveyor right 3.5 m L x W x H: with roller conveyor 6.0 x 1.2 x 1.5 m Weight approx. 450 kg Year of construction 1965 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12
Indramat RAC 3.1-150-460-A0I-Z1-220 Spindle Drive Drive Controller For sale is an Indramat / Bosch Rexroth RAC 3.1-150-460-A0I-Z1-220 AC Main Spindle Drive Controller – used, but in good, functional condition Technical details: Supply voltage: 3 × AC 380–460 V Control voltage: AC 230 V Weight: approx. 49 kg Continuous current: approx. 92 A Max. output power approx. 55 kW Ambient temperature: +5 °C to +45 °C (operating), −30 °C to +85 °C (storage) Max. operating altitude: up to 1000 m above sea level Protection class: IP 10, humidity class "F" according to DIN 40 040 Integrated cooling via fan Integrated emergency stop system Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can ...
Tumbler Inject Star HS-7 180 L in a good used and functional condition. Completely made of stainless steel. Rollable 180 liter drum with vacuum connection. Machine can be tilted. Dimensions W/D/H 76/110/110 cm. Connected values 400 Volt, 0,75 kW. Workshop tested, immediately ready for use. More on request.
maximum number of results exceeded
please refine your search
