ye i used for sale

1 piece robot KUKA KR30-2 Built in 2000 Reach 2000mm weight 880kg load capacity 30kg control KRC1 or also KRC2 weight 136kg / 185kg software version V4. 1 7 Teachpendant KUKA KCP1/KCP2 Connection cables 7 m / 15 m .

1 piece robot KUKA KR16-2 Mint Year 2011 reach 1611mm weight 235kg payload 16kg control KRC4 Weight 141kg Teachpendant KUKA touchpad KCP4 Connection cables 7 m .

Robot KUKA KR210 2 F Serie2000 Foundry Built in 2005 Reach 2700mm Weight 1267kg Load 210kg Control KRC2ed05 Weight 185kg Software version V5. 4.11 KUKA KCP2ed05 Connection cables 7 m / 15 m .

KUKA robot KR240L180-2 Serie2000 Built in 2008 Reach 3100mm Weight 1267kg Payload 180kg Control KRC2ed05 (Daimler version) Built in 2005 Weight 185kg Software version V5. 4.11 KUKA KCP2ed05 Connecting cables 15 m .

; ready for operation

.

KUKA KR360 built in 2004 Reach 2826mm Load 360kg Equity Wicht 2350 kg KUKA control VKRC2 (VW/Audi version) Weight 185kg Software V4. 1. 7SP08 (standard software) KUKA KCP2 KUKA set .

TECHNICAL SPECIFICATIONS Manufacturer: BÖHRINGER (Germany) Name: Impact crusher Type: PB 1300 x 1200 Year of construction: 1978 Weight: approx. 26,000 kg Drive line: 200 kW Drive type: V-belt Throughput: 200 - 300 t/h Inlet opening (width / height): 1,330 mm / 1,500 mm Maximum task size: approx. 1,000 mm Number of impact strips: 3 pcs. Rotor diameter: 1,200 mm Rotor width: 1,300 mm TECHNICAL SPECIFICATION Manufacturer: BÖHRINGER (Germany) Description: Impact crusher Type: PB 1300 x 1200 Year of construction: 1978 Weight: approx. 26,000 kg Drive power: 200 kW Type of drive: V-Belt Throughput: 200 - 300 t/h Feeding opening (width / height): 1,330 mm / 1,500 mm Feeding size: approx. 1,000 mm Number of rotor ledges: 3 Pcs. Rotor diameter: 1,200 mm Rotor width: 1,300 mm

Vacuum chamber with control and pump unit. diameter inside: 1000 mm Laenge inside: 1600mm vacuum pump: 1000m3/h Prated leakrate! Different vacuum chambers available as well as different constellations with pumps possible.

Tractive effort: to 25 Length: 2000 mm Room set: 3 piece

Rotary vane vacuum pump & oil lubricated Number: 5 pcs Status: Generalueberholt Performance: 12 months Manufacturer: Busch Type: RA160D Voltage: 50/60Hz 400V engine rated power: 4KW nominal suction digesters: 160m3/h end pressure: 0.5hpa(mbar) Inclusive: operating instructions, spare parts list delivery time: from stock; ready for use

Rotary vane vacuum pump - oillubricated Manufacturer: Leybold Type: Sogevac SV 300 Cat. No.: 10931 Status: Generalueberholt Gewast.: 12 months Including: oil filling (mineral oil), operating instructions with list of parts Voltage: 50/60Hz 230-400/460V Engine nominal: 5.5 KWfinal pressure or gasbalast: approx. 0.08 m bar Delivery time: ready for use; ready for use

Indexing table HAU RK 6-800, 6 work piece spindles, 3 polishing units, more details and inspection on request; cleaned and in working order

Incubator,VWR INCU-Line IL 10,0-70° C.

Indexing table HAU RK 6-1200, 6 work piece spindles and 4 polishing units type PES, 11 kW each, max. width polishing wheel 300 mm, incl. oscilation, electr. driven hight adjustment, liquide compound feeding system (spray guns + pressure tank, control cabinet Price and additional information on request.; good condition, working order

; ready for use

- hydraulic inner polishing / smirk - unit - type HAU RPAK 300 - travel left / right: 300 mm travel up / down: 200 mm - mounted on cross slide - manually movable 500 mm (forward / return); 300 mm (left / right)- possibly motorized

Intercooler overhauled

Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Kjellberg Plasma Quick-change head Percut 370 M 1 , 160 amps data see PDF; ready to use

Injection pump PS6HR50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Injection pump drive in Exchange for Volvo D30

Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Injection pump drive for Volvo D30 on an exchange basis

Infrared camera system FLIR ThermaCAM P60 PAL To detect, collect, analyze and document of thermal conditions in industrial and automotive technology needed from business, built in 2004, little used, has in the meantime been calibrated with documentation

Abegg to fan and the fan with fans Ziehl. noch nie benutzt NEW

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type MobiTIG 180 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 180 amps Duty cycle 20 % ED at 180 amps 60% ED at 110 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 355 x 160 x 275 mm Weight 9 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 18 months warranty 1 piece instruction manual List-Werks-Price ex stock  ...

ENGEL electric 280 ton year `2006. -Model : e-motion 740/280 -Clamping force : 280 ton -Screw diameer 45mm -Manufactured year : 2006

Immersion pump, MTR 15 16/16 A-W-A-HQQV, 15 KW, 225m, 17m³/h, Grundfos, used Special price (The current market price for a new device is € 8,380 excl. VAT) If you have a VAT number, we will be happy to issue you an invoice without VAT. Used! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. - 15 KW - Hmax. 225m - 17m³/h - 400/660 V - 50 Hz - 2920 rpm - Immersion pump, cooling lubricant pump - Pump stainless steel - Immersion depth 80cm - Overall dimensions 148 x 45 x 50cm - approx. 200kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. Since we know that the device works, we give you a functional warranty when you buy it. If the device does not work within 3 months of purchase, you can return the goods and we will refund the purchase price.

Material test bench / final inspection consisting of the following main components Keyence XG-H500M Digital 5 Million Pixel P/W Camera CCD: 2/3-inch monochrome CCD, squareElement all pixels 11 times read speed, 5,050,000 pixels Scan Method: Progressive (61.2 ms), Interlace (40.3 ms)Interlace is a binning process that sums up the odd rows and even lines. Model CA-DC21E Lighting Controller Type lighting controller For XG/CV-5000/CV-X200/CV-X100 series only Input: Forced shutdown of the lighting: Input voltage max. 26.4 V, min. 2 mA Edition Light control method (1) Constant voltage regulation method (DC lighting) (2) Pulse width modulation method (emission frequency: 100 kHz) [Change of ECU setting] Brightness levels 255 levels digital [Change of ECU setting] Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC ...

Fanuc LR Mate 100i High Speed Robot with Control It is a five-axis, modular, electrically servo-driven robot designed for loading and unloading precision machines, welding and material transport. Its hollow joint construction encloses the entire cable routing to avoid getting stuck. The FANUC LR Mate 100i also features brushless AC servo motors that minimize motor maintenance, sealed bearings and drives enable operation in harsh factory environments. Included in delivery is the control unit Mate RJ-2 Robot Specifications Axles: 5 Payload: 3kg H-reach: 620 mm Repeatability: ±0.04 mm Robot mass:32kg Movement speed of the robot J1 180 °/s (3.14 rad/s) J2 180 °/s (3.14 rad/s) J3 225 °/s (3.93 rad/s) J4 216 °/s (3.77 rad/s) J5272 °/s (4.75 rad/s) Robot Motion Range Robot J1 ±160° J2 +150° - 35° J3 +206° - 159° J4 ±120° J5 ±200° (Changes and e ...

Bosch Turbo Scara SR8 Robot + Control IQ200 Manufacturer: Bosch Order No. 3842999836 Serial No.3810198 HubPinole 40025 PN. pressure max. 8 bar Load max 8 kg Weight 51 kg + Control IQ 200 (Changes and errors in the technical data, information reserved!) Panning area see picture Item condition used In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 working days.

Bosch Scara SR 800 swivel arm robot incl. control Manufacturer: Bosch Maximum load on the gripper flange: 5 kg Stroke 3rd axis 480 mm Pn.-Duuck 4-8 bar Weight: 100 kg Swivel range see diagram, incl. complete control consists of Bosch MP 30 control panel + TR12-R + equipped plug-in card module Item condition used The robots were all in stock at a large automotive supplier as a failure replacement machine, so you are accordingly they are in very good condition. In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 wo ...

CB-Behrens CB-25-II/1650-L Operating hours: -Behrens 41190 hrs -Laser approx. 25000 hrs Year of construction: 1995 Documentation: All available Software: IBH-CNC Last revision: Mid-2016 Laser Wegmann Basel Triagon 2Kw 2Kw 2014/5 the glass tubes have been renewed Y-Spindel has been renewed. Of the turret placements, only 17 are still usable, the others must also be usable after an overhaul. ; ready for immediate use

Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-160 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 30 % ED at 160 Ampere 60% ED at 100 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories 1 pc TIG burner Alphaweld SR-17, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 pi ...

Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-200 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner Alphaweld SR-26, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1  ...

With Electrical motor

ARPAC M16632 Manufacturer: ARPAC USA Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. F ...

For deutsch description pls. look dwon below Internal mixer of the type GK 190-E from Werner & Pfleiderer (today HF Mixing Group), with interlocking rotors, hydraulic feeding The machine is currently disassembled and can be visited. All parts have been technically tested (tightness, wear, other damage). A complete refurbishment is recommended and can be carried out by us. In the case of refurbishment, we give you a 12-month warranty from delivery. Internal mixer type GK 190-E from Werner & Pfleiderer (today HF Mixing Group), with intermeshing rotors, hydraulic feeding. The machine is currently disassembled and can be inspected. All parts have been technically checked (tightness, wear, other damages). A complete reconditioning is recommended and can be done by us. In case of reconditioning we give you 12 months warranty from delivery.

Thermo Fisher Scientific/Dionex Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analysis); 0.000 to 3,000 ml/min (capillary) Accuracy of flow rate: < 0.1% Precision of flow rate: < 0.1 % Gradient dosing accuracy and precision: ± 0.5% at 2 ml/min (analysis only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analysis); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 24.1 kg (55 lb.) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus Dual Pump 6Port Valve MXP9900-000 AFC-3000 Automated Fraction Collector RFC-10 Controller Condition: used Scope of delivery: (See pictures as pictured) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

Lab Mixer Tangential Chamber volume 2,8 l / 2 l netto Sliding door AC motor 22 kW Year 1971

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 18i-T Operating hours: 2755 Technical data Number of axis total: 4 (X/Z/C/B) Number of spindles: 4 Max. grinding diameter: 350 mm Max. grinding depth: 350 mm Max.workpiece length + steady: 1300 mm Swing diameter: Above the workpiece table: 450 mm In front of the workpiece table: 680 mm Axial motion: Longitudinal travel (Z-axis): 500 mm Cross travel (x-axis): 200 mm Resolution: 0.0005 mm Rapid traverse Z: 20 m/min Rapid traverse X: 20 m/min Grinding spindle head: Swivelling range: -10 / + 30 ° Resolution: 2 ° Operating time: 2755 Hour Air connect: 5 bar Voltage 50 Hz 3x: 400 Volt Total power required: 20 kVA Machine´s weight about: 5000 kg Overall dimensions machine: Length: 3500 mm Width: 2700 mm Height: 2150 mm Various ac ...

Complete injection unit with 40 mm screw Repair required

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Control: FANUC Series Oi-TD Operating hours: 6000 Technical data Number of spindles: 4 Min. grinding diameter: 3 mm Max. grinding diameter: 200 mm Workpiece length max.: 600 mm Swing diameter: Above the workpiece table: 230 mm In front of the workpiece table: 350 mm Centre height: 130 mm Centre height over slide: 200 mm Axial motion: Longitudinal travel (Z-axis): 500 mm Cross travel (x-axis): 120 mm Spindle head (u axis): 150 mm Feed range: Z axis (longitudinal travel): 0 - 99.99 mm/min X axis (transversal): 0 - 99.99 mm/min Rapid traverse Z: 15 m/min Rapid traverse X: 5 m/min B axis swivelling range: -32 / + 2 ° Resolution: 0.0001 ° Grinding spindle head: Resolution: 0.001 Air connect: 5 bar Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 4.3 ...

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 5.0 mm Max. internal grinding diameter: 200 mm Grinding depth: 250 mm Centre height: 180 mm Distance between centres: 1000 mm Workpiece spindle speeds: number (steps): 6 from: 125 rpm up to: 1000 rpm Spindle hole: 50 mm Grinding spindle speeds: from: 0 rpm up to: 12000 rpm Grinding table travel: min.: 3 mm max: 600 mm Table speeds: stepless from: 0.40 m/min up to: 10.00 m/min Voltage 50 Hz 3x: 380 Volt Workpiece spindle motor: 1.00 kW Drive for internal grinding spindle: 3.7 kW Total power required: 8.7 kW Machine´s weight about: 2700 kg Overall dimensions machine: Length: 1800 mm Width: 900 mm Height: 1500 mm Various accessories: 3-jaw chuck diameter: 200 mm Steady

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 1 mm Max. internal grinding diameter: 50 mm Grinding depth: 200 mm Centre height: 132 mm Workpiece spindle speeds: from: 150 rpm up to: 1500 rpm Max. angle: 90 ° Possible grinding-spindle speeds: from: 16500 rpm up to: 120000 rpm Table speeds: stepless up to: 10 m/min Voltage 50 Hz 3x: 380 Volt Workpiece spindle motor: 0.8 kW Drive for internal grinding spindle: 3 kW Machine´s weight about: 2000 kg Overall dimensions machine: Length: 1800 mm Width: 1000 mm Height: 1800 mm Various accessories: Grinding wheel dressing device

Injection pump from a Liebherr excavator Operating hours approx. 2,000 hrs pump was upgraded to electric Storage device is replaced. Pump is fully functional Special price

1 pc for sale, in working order, good condition Husky HPN 726619 HMI Human Machine Interface FOR SALE XYCOM 9960 Operator Station HMI for Husky G-line, Index-line & others PET Preforms Injection Molding Machines. Exworks Miami USA contact us: j.plaul@optimisense Whatsapp +5491157143569 US Mobile +1.305.831.8888 Skype: optimisense For more info and pictures join our FB group HUSKY USED PET PREFORMS RELATED MACHINERY

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 5 mm Max. internal grinding diameter: 250 mm Grinding depth: 200 mm Workpiece spindle speeds: stepless from: 15 rpm up to: 1500 rpm Max. angle: +/-15 ° Spindle hole: 50 mm Max. distance from workpiece spindle to grinding spindle holder: 770 mm Table speeds: stepless from: 0 m/min up to: 10 m/min Workpiece spindle motor: 0.5 kW Drive for internal grinding spindle: 3 kW Machine´s weight about: 2250 kg Various accessories: Wheel trueing attachment 3-jaw chuck diameter: 200 mm 3-jaw chuck diameter: 250 mm 4-jaw chuck diameter: 250 mm Set of jaws hard Set of jaws Macnetic chuck diameter: 200 mm Steady Set of collets Set of grinding arbors

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 0.5 mm Max. internal grinding diameter: 25 mm Grinding depth: 100 mm Centre height: 125 mm Distance between centres: 160 mm Workpiece spindle speeds: number (steps): 3 from: 350 rpm up to: 750 rpm Spindle hole: 20 mm Grinding table travel: min.: 1 mm max: 100 mm spindle holder: B - 8 mm Table speeds: stepless up to: 5.00 m/min Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 350 kg Overall dimensions machine: Length: 910 mm Width: 500 mm Height: 1600 mm Various accessories: Air spindle