wz used for sale

Tool holder, extension -Shaft mount on both sides: Ø 71 mm -Drawing with the pictures -Transport dimensions: 1650/800/H450 mm -Weight: 370 kg

Maximum loadable weight (capacity between the tips) t 80 Machine weight t 160 Nominal turning diameter mm Ø 1,800 Maximum turning diameter mm Ø 1,900 Maximum diameter of passage on the bench mm Ø 2,600 Max turning length (distance between centers) mm 11,925 (12,025) Spindle axis height 1,300 mm Plateau diameter mm Ø 1,900 Plateau grip range mm Ø 300 ÷ Ø 1,350  Grip range 1 mm Ø 300 ÷ Ø 550  Grip range 2 mm Ø 500 ÷ Ø 950  Grip range 3 mm Ø 900 ÷ Ø 1,350 Clamping force (with max tightening torque 250 Nm) kN 200 Spindle motor power kW 160 Total installed power kW 310 Maximum spindle torque kNm 155 Spindle rotation speed range rpm 1 ÷ 150  Spindle rotation speed in 1st rpm range 1 ÷ 24  Spindle rotation speed in 2nd rpm range 20 ÷ 60  Spindle rotation speed in 3rd rpm range 50 ÷ 150 Carriage forward speed in transverse direction (X� ...

Tool holder fixed for Index G300 (VDI30) Condition: Used Set consisting of: 14 pieces of drill rod holder 24 pieces of turning steel brackets 2 pieces of detour

Tool holder collet fixed for index G300 (VDI30) Condition: Used Set consisting of: 14 pieces of drill rod holder 24 pieces of turning steel brackets 2 pieces of detour

Engine Brand: CATERPILLAR, Conditie: CORE, Nominal Power @ Nominal Rpm: 688.3 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: LUCHTGEKOELDE INTERCOOLER , Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: Nee , Starter Voltage: No Starter Present , Rated Power: 688 Kw, Rated Speed: 1800 Rpm, , https://www.hamofa.com/catalog/product/view/id/219031, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: WZH-3413157; Transport weight [kg]: 3900

Tool grinding machine, Fabr. Reinecker, WZS 3, used, with extensive accessories Spiral sander Handpiece head Automatic part head Hydraulic table movement Cylindrical grinding device for exterior and interior

- NEU - inklusiv 4 HSS Streifenhobelmesser - Tragkörper aus Stahl - Druckleistenspannung mit Federdruck - Wekzeug FI 125 mm - Hobelkopflänge 190 mm - Bohrung 40 mm - MEC

- NEU - Tragkörper aus Stahl - Druckleistenspannung - Wekzeug FI 145 mm - Falzbreite 15,2 - Bohrung 40 mm - MEC

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

- stufenloser Vorschub (0 - 3m/min) über Potentiometer einstellbar - Ein- und Auszugstischverlängerung - stabile Gusskonstruktion des Schleifkörpers - max. Schleifbreite 800mm, bei zwei Schleifdurchgängen - Einzugsteppichspannvorrichtung über Federsystem - Verwendung von handelsüblichen Schleifbändern - max. Werkstückhöhe 130mm - Walzendurchmesser 132mm, Breite 405mm - Motor 2,1 PS / 230 V Lieferumfang: - Schleifband, Untergestell, stufenloser Einzug - Abmessungen L=940, B=640, H=136 mm - Gewicht 96 kg

Tool cabinet for bending tools / exhibition object suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg - for AMADA/Promecam tools -extendable drawers, allows double-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated -side fork rails for transport by forklift (cavity under the cabinet) -the drawers run on roller slide rails ( serve as additional stabilization) -the cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Fachbreite usable 130mm - Technical depth usable 980mm - Number of intermediate boeden: 3 stueck

Tool cabinet for bending tools suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allows the two-sided access to the tools -any adjustment of the inserting -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Tray width usable 130mm - Depth usable 980mm - Number of intermediate boeden: 3 stueck

Excellent general condition. Used in plastic mold makers mainly for 3D graphite-carbon tool models and engraving work. Low cutting strengths, low machine load... Travel x=1200 y=800 z=500 Spindle speed 0 - 8000 rpm / Drive power main spindle 11 kW feed speed 0 - 30 m/min / table dimensions 1320 x 800mm Table load max. 2,000kg / 20-fold tool changer / max wzg diameter 63mm / WZG Long 200mm / tool holder SK 40 / 3D probe, Fabr. Heidenhain, type TS 220 / Cooling agent equipment / Spaenefoerderer / Suction (optional) Complete enclosure Heidenhain Control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410

Several BÜHLER MDDK roller mills in different versions on sale. Any sort of feeding With or without inlet glass Scraper knifes, single or divided spout Plain rolls or corrugated rolls Size 1000 mm or 800 mm with roller diameter 250 mm Our specialists will provide a liable solution with used Buhler MDDK roller mills at good value.

It is used in rubber and plastics mixing, warming mixing, sheeting mixing, etc. III Equipment specification XK400×1000 mixing mill 1. Main technical specification NO. Item Main technology data and feature A Main technology data 1 Roll diameter 400mm 2 Roll working length 1000mm 3 Roll linear speed Front:14.85m/min Rear:18.85m/min 4 Speed ratio of rolls 1:1.27 5 Max roll space 10mm 6 Compound feeding capacity 25kg-35kg 7 Motor power 37KW,n=980r/min，IE3 8 Dimensions 4400X1710X1850mm 9 Gross weight 8500kg B Feature of main machine 1 Roll size(mm) Ф400×1000 material alloy chilled hard cast iron, surface hardness HS70±2,Surface roughness: Ra0.2 Bearing type Adopt the aligning roller bearing, copper pressure ring, bearing taper 1:12 type Front roll is drilled roll and rear roll is drilled roll, can pass cooling water, e ...

Description Rexroth servo valve assembly 0811404607 4WRPEH 6 C3 B04L - 20/G24K0/A1M-816 0811404324 4WRLE 16 WZ180SJ - 30/G24K0/ A1M-772 for disassembly

Description Rexroth servo valve assembly 0811404607 4WRPEH 6 C3 B04L - 2X/G24K0/A1M-816 0811404324 4WRLE 16 WZ180SJ - 3X/G24K0/ A1M-772 for disassembly

Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Waterbury Farrel Type: WZS- Reversing - Sendzimir Rolling Mill type: ZR – 23M – 31”, reversing Z”, 1 – 2 – 3 – 4 Built: 1977 Modernised in 1991 Capacity: approx. 50 000 T/annum Strip width: 370 – 740 mm Strip tension: controlled up to 10 Tons Thickness: Entry: 3.5 mm Exit: 0.20 mm Speed: 183 – 368 m/min. Min. exit thickness of material M70-A: 0.04 mm Last pass from 0.12 to 0.04 mm Qty. 1 Second-hand roll grinder Mfc.: Landis Type: L-28A Roll dia.: 40-100 mm Roll length: up to 1500 mm Qty. 15 Containers

Excellent general condition. Used by plastic mold makers mainly for 3D graphite-carbon tool models and engraving work. Low cutting forces, low machine load... Travels x=1200 y=800 z=500 Spindle speed 0 - 8000 rpm / drive power main spindle 11 kW feed speed 0 - 30 m/min / Table dimensions 1320 x 800mm Table load max. 2,000kg / 20-fold tool changer / max Wzg diameter 63mm / WZG length 200mm / tool holder SK 40 / 3D probe, Fabr. Heidenhain, Type TS 220 / Coolant device / chip conveyor / extraction (optional) Complete enclosure Heidenhain control type TNC 426 PB digital / electronic handwheel Heidenhain HR 410

Grinding spindle GMN TSAV 40 s x 208 - 6002 ( TSAV40sx208-6002 ) n max: 13000 rpm diameter: Ø 40 mm sleeve length: 208 mm tool holder / drive: Ø 11 / 13 mm, length: 15 mm ( cone 1 : 7,, 5 ) thread: M10 x 1.0, length: 10 mm, left-hand thread flange: 85 x 56 x 8.5 mm, bore: Ø 22 mm used, tested ! Dimensions ( spindle ): 261 x 85 x 56 mm Dimensions ( packaging ): 365 x 85 x 125 mm

Grinding spindle FEMINA 2.8-5 TGL 4870 ( TGL4870 ) n max: 14000 rpm diameter: Ø 80 mm sleeve length: 310 mm used, tested ! Dimensions: 373 x 80 x 80 mm

Rotary table PAGUS Ø 800 mm Table height: 160 mm 4 grooves: 50 mm Dimensions: diameter 930 x 470 mm

Grinding spindle SFJ HJ860 n max: 60000 rpm diameter: Ø 80 mm sleeve length: 220 mm tool holder: Ø 9 mm, length: 15 mm female thread: M5 x 0.8, depth: 25 mm flat pulley: Ø 30 mm, width: 25 mm, barrel-shaped used, tested ! Dimensions: 300 x 80 x 80 mm

Saw band metal WIKUS Biflex 2ZpZ Claw tooth Dimensions: 8128 x 50 x 1.30 mm

Grinding spindle CZ IBC 80 250 T n max: 16000 rpm diameter: Ø 80 mm sleeve length: 222 mm tool holder: Ø 10 mm, length: 10 mm female thread: M5 x 0.8, depth: 25 mm tool holder (screw-on): Ø 10 mm, length: 15 mm female thread: M6 x 1.0, depth: 20 mm flat pulley: Ø 40 mm, width: 60 mm, barrel-shaped used, tested ! Dimensions: 383 x 80 x 80 mm

Circular saw motor, electric motor with brake PERSKE Type: KS 80.12-2 BR ( KS80.12-2BR ) 4,4 kW 2830 rpm 400 V IP 54 Shaft diameter: Ø 30 / 60 mm Disc diameter: Ø 160 mm Flange diameter: Ø 215 mm Matching saw blade WZ252 ! used, tested ! Dimensions: 465 x 330 x 260 mm

Saw blade metal KASTO M42 2ZpZ Dimensions: 8028 x 50 x 1.30 mm

Angle table with adjustable attachment, clamping bracket, T-slot plate WMW - Consists of 2 parts. Clamping area: 1600 x 850 x 680 / 760 mm Number of grooves: 6 Groove width: 20 / 38 mm hole spacing at foot: 130 mm Dimensions: 1600 x 850 x 680 / 760 mm

Fräser, H, schl. Zahnst. Group cutter FETTE K HSS E ( KHSSE ) Modul 0,8 EW 20° DIN 3972 BP I

3- Jaw chuck WMW NILES DHK 200x3 Outer Ø: 200 mm Flange: 155 mm Bore Ø: 60 mm bolt circle: 175 mm Height with jaws: 125 mm feed number: 507 Dimensions: 200 x 200 x 125 mm

Konuswischer HOFFMANN 34370 2x SK30 2x SK40 2x MK4 1x MK5 1x Walter 30478

3-jaw chuck, three-jaw chuck ZTM outer Ø: 155 mm flange: 130 mm bolt circle: 143 mm bore Ø: 40 mm Height with jaws: 95 mm Total height: 95 mm Feed number: 16506 Jaw number: 16506 Complete with inner and outer jaws Dimensions: 155 x 155 x 95 mm

Morse cone / chuck holder PAGUS MK5

3- Jaw chuck, three-jaw chuck PAGUS Outer Ø: 200 mm Flange:155 mm bolt circle: 174 mm height with jaws: 100 mm bore: 55 mm Square for wrench: 11.5 mm Dimensions: 200 x 100 mm

2 pieces, reducing sleeves RH RÖHM 262 MK5 : MK3 DIN 2185 Dimensions: 170 x 40 x 90 mm

Faceplate PAGUS Outer Ø: 400 mm Flange: 155 mm bolt circle: 134 mm bore Ø: 110 mm height with jaws: 140 mm total height: 190 mm short cone Dimensions: 400 x 200 mm

Precision face and boring chuck WMW A 100 - 4 ( A100-4 ) TGL 32680 ( TGL32680 ) Dimensions: 210 x 100 x 85 mm

Face plate PAGUS Outer Ø: 400 mm bolt circle: 135 mm Bore Ø: 100 mm Height with jaws: 140 mm Flange: 175 mm total height: 190 mm short cone used, checked ! Dimensions: 400x 200 mm

welding table, straightening table, straightening flap, work table, clamping table straightening plate, straightening table PAGUS 2000 x 680 mm height: 840 mm Dimensions: 2000 x 700 x 850 mm

Universal clamping table, swivel, tilt and turntable table, T-slot plate PAGUS clamping area: 630 x 270 mm 5 grooves slot width: 12 mm table can be tilted back and forth from 90° by 30° table can be tilted left and right by 15° and swivel left and right by 45° New ! Dimensions: 650 x 290 x 290 mm

Metal saw band, saw band WIKUS BIFLEX VARIO M42 4120 x 27 x 0.90 mm 10 - 14 ZpZ ( teeth per inch ) Length: 4120 mm Width: 27 mm Thickness: 0.9 mm New ! Dimensions ( packaging ): 430 x 430 x 55 mm

Moving centering tip WMW / ABW ( WMW/ABW ) ZN205 Size: MK5 New ! Dimensions: 290 x 100 x 100 mm

3-jaw chuck, three-jaw chuck with outer jaw PAGUS outer Ø: 250 mm bore Ø: 80 mm flange: 111 mm bolt circle:134 mm height with jaws: 123 mm feed number: 72 295 jaw number: 12 295 short cone Dimensions: 250 x 250 x 123 mm 3 extra jaws

Grinding spindle DKF 2 . 7 - 4 / 1 ( 2.7-4/1 ) n max: 16500 rpm Ø 70 mm Tool holder: Ø 25 x 30 mm / Ø 13 x 20 mm Dimensions: 335 x 80 x 80 mm

Grinding spindle CCCP BC3 - 70 80 x 300 N 7614 n max: 12000 rpm Ø 80 / 90 mm Dimensions: 450 x 95 x 95 mm M12 attachment: Ø inside 15,9 mm; Ø outside 28 mm drive: Ø inside 28.5 mm; Ø outside 40.6 mm

Grinding spindle DKF 3.8 - 7 / 1 ( 3.8-7/1 ) TGL 4870 ( TGL4870 ) n max: 14000 rpm Ø 80 mm Dimensions: 550 x 80 x 80 mm M15 x 1.0 left-hand thread

Grinding spindle DKF 6.251 / 21 ( 6.251/21 ) n max: 12500 rpm Ø 80 mm conical on both sides Ø 28 to 21 mm x 56 mm flattened to 24 mm Ø 28 to 21.5 mm x 45 mm Dimensions: 360 x 80 x 80 mm

Grinding spindle DKF 3.4 - 3 / 2 ( 3.4-3/2 ) TGL 4870 ( TGL4870 ) n max: 32000 rpm Ø 40 mm Dimensions: 285 x 40 x 40 mm

Grinding spindle DKF 2.6 - 4 / 1 ( 2.6-4/1 ) TGL 4870 ( TGL4870 ) n max: 20000 rpm Ø 60 mm mounting bore: Ø 13.5 mm (conical) drive: Ø spigot: 17.9 mm; Ø thread: M10 x 1 Dimensions: 300 x 60 x 60 mm