129,020 used machines on RESALE, but how to find them? Machine Search
These include: paint sieve, rubber, hearing protection. Auction-ID: A1-41277-305
Including bolts, nuts and hose clamps Auction-ID: A1-46933-47
pressure: 80.0 t stroke: 250 mm table surface area: 1040 x 260 mm column travel between the guideways: 1040 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 5.5 kW weight of the machine ca.: 835 kg. dimensions of the machine ca.: 1810 x 700 x 2100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on t ...
pressure: 20,0 t stroke: 185 mm table surface area: 170 mm Breite column travel between the guideways: 510 mm weight of the machine ca.: 112 kg dimensions of the machine ca.: 1630 x 560 x 730 mm Furnishing: - Standard with pressure cylinder that can be moved to the left and right - For aligning, pressing, bending, assembling gears, discs, etc. - Standard with foot pedal and hydraulic hand pump for piston delivery - Standard with support prism for aligning shafts - With automatic piston retraction by integrated return spring as standard - Height-adjustable press table with locking bolts - Large manometer for reading the compressive force - Including two-stage hydraulic pump - Robust construction with welded steel frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
High-quality, hydraulic press can be used both manually and motorically. . Cylinders can be moved sideways. Safety valve at cylinder end position. CE marking Pressure 160 t Stroke 400 mm Passage between the uprights longitudinally/sideways. 1100 /350 mm Installation height 900 mm Capacity per litre 15 l Speed from 6.2 mm/sec Speed to 9.8 mm/sec Motor power 5.5 kW Machine weight approx. 1.3 t Dimensions L x W x H 1.6 x 1.0 x 2.55 m
pressure: 30 t stroke: 150 mm table surface area: 185 mm Breite column travel between the guideways: 530 mm weight of the machine ca.: 162 kg dimensions of the machine ca.: 800 x 700 x 1805 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 50 t stroke: 200 mm table surface area: 730 x 205 mm dayligth: 1050 mm column travel between the guideways: 730 mm weight of the machine ca.: 288 kg. Description : - Standard with cable winch - for easy height adjustment of the support table - Piston delivery either manually or pneumatically - Powerful workshop presses for craft and repair businesses - Optimum price-performance ratio thanks to rational design - The standard foot pedal keeps your hands free for the workpiece - Increased range of application thanks to the optionally . available pressure mandrel set (10 pieces). - Pressure cylinder with integrated return spring for piston return - Welded steel frame for heavy use and high stability - Versatile in use thanks to the pressure cylinder that can . be moved to the left and right The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 11.0 kW weight of the machine ca.: 1870 kg. range L-W-H: 2200 x 1300 x 2300 mm Exhibition machine from 2021 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: 1 feed speed 1 working speed 1 ...
pressure: 20 t weight of the machine ca.: 590 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tub volume: approx. 1940 x 1000 x 740 mm incl. Clamping width: approx. 6000 mm
pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 11.0 kW weight of the machine ca.: 2070 kg. range L-W-H: 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery spee ...
pressure: 30.0 t stroke: 200 mm table surface area: 775 x 190 mm column travel between the guideways: 775 mm ajustment speed: 7.5 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec engine output: 3.0 kW weight of the machine ca.: 400 kg. dimensions of the machine ca.: 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: 1 feed speed 1 working speed 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - ...
pressure: 60.0 t stroke: 250 mm table surface area: 1040 x 370 (315) mm column travel between the guideways: 1040 mm ajustment speed: 8.0 mm/sec working feed: 4.0 mm/sec return speed: 10.0 mm/sec engine output: 4.0 kW weight of the machine ca.: 800 kg. dimensions of the machine ca.: 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: 1 feed speed 1 working speed 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the s ...
pressure: 100 t stroke: 300 mm table surface area: 1070 x 315 mm column travel between the guideways: 1070 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec oil volume: 90.0 l engine output: 5.5 kW weight of the machine ca.: 1870 kg. dimensions of the machine ca.: 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hy ...
pressure: 100 t stroke: 380 mm table surface area: 1100x424 mm dayligth: 180/750 mm distance between columns: 1100 mm diameter of piston: 90 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 060 t stroke: 350 mm table surface area: 750x344 mm dayligth: 197/750 mm distance between columns: 750 mm diameter of piston: 75 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TECHNICAL DATA: 01 Column drill (0.37 kW) 01 Grinding machine complete with table 01 Electrode welding machine
pressure: 100 t stroke: 300 mm table surface area: 1070 x 260 mm column travel between the guideways: 1070 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec oil volume: 90.0 l engine output: 5.5 kW weight of the machine ca.: 1500 kg. dimensions of the machine ca.: 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand ...
pressure: 100 t stroke: 220 mm daylight between the columns: 1190 mm dayligth: 700 mm : 190 mm diameter of piston: 120 mm table surface area: 1600 x 800 mm weight of the machine ca.: 1,3 t dimensions of the machine ca.: 1,9 x 1,4 x 2,0 m Side-adjustable cylinder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 26015 Technical data: - Max. pressing force approx. 160 t - Max. ram stroke approx. 300 mm - Double-acting cylinder with hydraulic return - Max. retraction force 110 T - Stand width approx. 1540 mm - Table width 1500 mm - Table depth 1000 mm - Table height 590 mm - Max. installation height approx. 850 mm - Drive 400 V / 11 kW - Space requirement with unit approx. W 2350 x H 2200 x D 1750 mm - Weight approx. 3500 kg
some steel cabinets/tool cabinets for sale. Prices and pictures are available at: inventar-verkauf.de/id/alesco
Different variants of workbenches for sale. Prices and pictures are available at: inventar-verkauf.de/id/alesco
Key data: 20 t
DURENDUS 20 T Workshop Press – Single Column Press – 600 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 3.120 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a basic functional design – in practice, in most cases it is expanded with additional equipment and configured accordingly on a project-specific basis. Table top with X-shaped T-slot (from 60 t) Pressure adjustment Lateral displacement of the press ...
Key data: 30 t
DURENDUS 30 T Workshop Press – Single Column Press – 700 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 3.550 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a basic functional design – in practice, in most cases it is expanded with additional equipment and configured accordingly on a project-specific basis. Table top with X-shaped T-slot (from 60 t) Pressure adjustment Lateral displacement of the press pi ...
Key data: 60 t
DURENDUS 60 T Workshop Press – Single Column Press – 900 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 4.550 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a basic functional design – in practice, in most cases it is expanded with additional equipment and configured accordingly on a project-specific basis. X-shaped T-slot table top 600 × 900 × 30 mm Pressure adjustment Lateral displacement of the press ...
flue capacity: 350 kW; Conventional yeld capacity: 279 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 300 mm; flue length: 1200 mm; oven width: 740 mm; oven hight: 1040 mm; air flow: 17800 m³/h; power consumption hot air fan: 3 kW; power consumption flue gas exhaust: 600 W; aproximate surface to heat up: 5000 m³; area to be heated: 1000 m²; heater height without hot air conveying pipes: 2500 mm; heater width: 1100 mm; heater length: 1900 mm; weight: 850 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery run ...
flue capacity: 510 kW; Conventional yeld capacity: 407 kW; flue diameter: 250 mm; hot air delivery pipes: 4 x 350 mm; flue length: 1900 mm; oven width: 900 mm; oven hight: 900 mm; air flow: 26000 m³/h; power consumption: 4500 W; aproximate surface to heat up: 8000 m³; area to be heated: 1800 m²; heater height without hot air conveying pipes: 3000 mm; heater width: 1220 mm; heater length: 2700 mm; weight: 1575 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special el ...
Combustion chamber output: 175 kW; Working power: 140 kW; Smoke flue diameter: 200 mm; Hot air delivery pipes: 1 x 500mm; Furnace length: 950 mm; Furnace width: 600 mm; Furnace height: 860 mm; Air flow rate: 8900 m³/h; Power consumption: 3500 W; designed for room volume: 3000 m³; Area to be heated: 500/600 m²; Furnace height without hot air delivery pipes: 2200 mm; Furnace width: 930 mm; Furnace length without flue gas fan: 1700 mm; Weight: 615 kg; Hot air furnace with a combustion chamber made of stainless chrome thermal steel, with reinforcing fins and flue exchanger. On
flue capacity: 175 kW; Conventional yeld capacity: 140 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 250 mm; flue length: 950 mm; oven width: 600 mm; oven hight: 860 mm; air flow: 6300 m³/h; power consumption: 8900 W; aproximate surface to heat up: 2200 m³; area to be heated: 500/600 m²; heater height without hot air conveying pipes: 2200 mm; heater width: 930 mm; heater length: 1700 mm; weight: 615 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special ela ...
flue capacity: 125 kW; Conventional yeld capacity: 99 kW; flue diameter: 180 mm; hot air delivery pipes: 2 x 250 mm; flue length: 750 mm; oven width: 560 mm; oven hight: 700mm; air flow: 6300m³/h; power consumption: 1500W; aproximate surface to heat up: 1500m³; area to be heated: 300/350 m²; heater height without hot air conveying pipes: 1980 mm; heater width: 800 mm; heater length: 1280 mm; weight: 415 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic ...
flue capacity: 34 kW; Conventional yeld capacity: 29 kW; flue diameter: 160 mm; hot air delivery pipes: 2 x 180 mm; flue length: 500 mm; oven width: 400 mm; oven hight: 590 mm; air flow: 2200 m³/h; power consumption: 400 W; aproximate surface to heat up: 500 m³; area to be heated: 100/150 m²; heater height without hot air conveying pipes: 1560 mm; heater width : 550 mm; heater lenght: 920 mm; weight: 190 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic ...
Key data: 80 t
DURENDUS 80 T Workshop Press – Single Column Press – 900 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: € 4,990 net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. X-shaped T-slot table top 600 × 900 × 30 mm Pressure adjustment Lateral displacement of the press pisto ...
Key data: 100 t
DURENDUS 100 T Workshop Press – Single Column Press – 1,000 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 5.990 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. X-shaped T-slot table top 650 × 900 × 90 mm Pressure adjustment Lateral displacement of the press pi ...
Key data: 150 t
DURENDUS 150 T Workshop Press – Single Column Press – 1,250 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can supply you with this machine from stock or manufacture it from scratch – gladly taking into account individual options. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 6.900 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 700 × 1,000 × 100 mm Pressure adjustment Lateral dis ...
Key data: 180 t
DURENDUS 180 T Workshop Press – Single Column Press – 1,400 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can supply you with this machine from stock or manufacture it from scratch – gladly taking into account individual options. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 8.950 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 700 × 1,000 × 100 mm Pressure adjustment Lateral dis ...
Key data: 200 t
DURENDUS 200 T Workshop Press – Single Column Press – 1,500 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 10.750 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement of the ...
High-quality, hydraulic press can be used both manually and motorically. . Cylinders can be moved sideways. Safety valve at cylinder end position. CE marking 2-year warranty Pressure 60 t Stroke 400 mm Passage between the uprights longitudinally/sideways. 820 x 300 mm Installation height 900 mm Capacity per litre 6.0 l Speed from 5.4 mm/sec Speed to 8.3 mm/sec Motor power 3.0 kW Machine weight approx. 0.725 t Space requirements approx. 1.46 x 0.85 x 2.4 m Auction-ID: A7-46642-60
5 pull-outs, without contents, with mounted tool presetter Auction-ID: A1-46666-410
This frame press is CE certified according to the latest guidelines - With manual hydraulics - Move cylinder sideways - 2 pcs press block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs press bolts, 10 - 30mm, with quick-change adapter, max. 20t - 2 Press pads Pressure 10 t Stroke 180 mm Clear width between uprights 335 x 115 mm Installation height max. 340 mm Cylinder diameter 56 mm Piston diameter 40 mm Machine weight approx. 0.05 t Dimensions approx. 0.75 x 0.53 x 1.6 m Auction-ID: A7-46642-125
Frame press, CE certified according to the latest guidelines. - With manual hydraulics - Move cylinder sideways - 2 pcs press block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs press bolts, 10 - 30mm, with quick-change adapter, max. 20t - 2 Press pads Pressure 20 t Stroke 180 mm Clear width between uprights 540 x 100 mm Installation height max. 990 mm Cylinder diameter 72 mm Piston diameter 48 mm Machine weight approx. 0.12 t Space requirement approx. 0.8 x 0.7 x 1.8 m Condition: never used / new (5) Auction-ID: A7-46642-166
High-quality, hydraulic press can be used both manually and motorically. . Cylinders can be moved sideways. Safety valve at cylinder end position. CE marking Pressure 100 t Stroke 400 mm Passage between the uprights longitudinally/sideways. 1010 x 300 mm Motor power 4.0 kW Capacity per litre 11.0 l Installation height 900 mm Table surface 1010 x 560 mm Speed from 4.8 mm/sec Speed to 7.5 mm/sec Machine weight approx. 0.9 t Dimensions L x W x H 1550 x 900 x 245 mm Auction-ID: A7-46642-145
maximum number of results exceeded
please refine your search
10 € 
