We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,781 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Manufacturer: Kraftwelle, stable workshop trolley, tool trolley type KW-03-1 -7 drawers: see photos for division -1 side door -Total dimensions: 860/460/H955 mm -Weight: 60 kg
used
Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Manufacturer: Kraftwelle, stable workshop trolley, tool trolley type KW-01 -7 drawers: see photos for division -Total dimensions: 700/465/H970 mm -Weight: 57 kg
used
Tool trolleys, workshop trolleys, mobile workshop trolleys, transport trolleys, table trolleys -Workshop trolley: Transport trolley made of aluminum, with drawer -Length: 1030mm -Width: 610mm -Height: 980mm -Swivel castors: 4 pieces, 2x with brakes -Weight: 24 kg
used
Tool trolleys, workshop trolleys, mobile workshop trolleys, transport trolleys, table trolleys, assembly trolleys -Workshop trolley: transport trolley, assembly trolley, foldable -Length: 1600mm -Width: 1100mm -Height: 1020mm -Swivel castors: 4 pieces with brakes -Weight: 103 kg
used
Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Workshop trolley: stable tool trolley type KW-03-1 -5 drawers: lockable, see photos for layout -Contents: 15 SK 40 tool carriers -Total dimensions: 885/555/H995 mm -Weight: 116 kg
used
Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Workshop trolley: stable tool trolley -4 drawers: lockable, see photos for layout -Contents: 25 tool carriers HSK A63/B80 -Total dimensions: 885/555/H995 mm -Weight: 101kg
used
Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Manufacturer: Duro, sturdy workshop trolley tool trolley type KW-03-1 -Load: total max. 150 kg / drawers 15/25 kg -7 drawers: lockable, without key / see photos for layout -Total dimensions: 770/470/H980 mm -Weight: 53 kg
used
Truck bed with crane, workshop and power supply in very good condition! Arpo loader crane type Hummel GSK 500 CE year 2015, rope 5mm length 15m, load capacity max 500kg, at 1.5m radius max 350kg. Loading area for mounting on trucks or as a trailer body. Was mounted on truck Mitsubishi Fuso Canter 4x4 DOKA 6C18D Year of construction 2015, manufacturer GEWA Fahrzeugbau. ARPO crane with electric winch, lifting capacity 350kg at radius 1.5m Structure with lockable sliding door, inside small ALUCA workshop with workbench, Drawer cabinets with 100% pull-out, vice, LED lighting and power distribution 400 volts and 220 volts.
used
Tool trolleys, workshop trolleys, mobile workshop trolleys, drawer cabinets, welding machine trolleys, machine trolleys -Width: 410 mm -Depth: 800 mm -Height: 1010 mm -Weight: 49 kg
used
Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet -Width: 560 mm -Depth: 665 mm -Height: 800 mm -Weight: 78 kg
used
Description: Contents consisting of indexable inserts, taps, pliers, screwdrivers, a spirit level, open-end wrench, Allen key and various workshop supplies Please note: the powered tool holders on the workshop trolley are not included in the scope of delivery Approx. Onsite Dimension. (l x w x h): 900 x 600 x 1,000 mm, weight approx.: 120 kg
used
Description: Various workshop equipment: .  , - N.1 Workbench with wooden top , 100 kg, 700x1000x1000 mm. - N.3 ionization units , 600 kg, ,2500x1200x2000 mm ( 3 ionization units each 1000 x 800x2000 mm, with tanks 200x1000 mm). - N.1 Electrical cabinet , 80 kg, 800x1200x1200 mm. - N.1 GALILEO ,ERGOTEST COMP 25 hardness tester, 100 kg, 600x250x1000 mm - , N.1 Chiller MTA TAE051 ,year 2001 , ,215 kg, ,1600x800x1600 mm (400 V, 50 Hz, 14 A, 7.8 kW, IP54, refrigerant  ,R407C, Maximum pressure 26 bar, maximum temperature 65°) - , N.1 FAC electric pallet truck , 800 kg, 1800x800x2000 mm (With battery charger) - N.2 workshop chest of drawers ,AMOS , 160 kg, 1400x750x1050 mm (each 80 kg, ,700x750x1050 mm) - N.1 MECATOOL workbench with drawers, 100 kg, 1400x800x1300 mm (including drawers) - N.1 Hydraulic equipment for handcrafted package ...
new
pressure: 30.0 t stroke: 190 mm table surface area: 170 x 695 mm dayligth: 1000 mm column travel between the guideways: 695 mm weight of the machine ca.: 280 kg dimensions of the machine ca.: 1300 x 600 x 2000 mm MADE IN ITALY Furnishing: - powerful workshop press for craft and repair businesses - manual-hydraulic workshop press - 2-way valve with automatic piston retraction - Two-stage descent speed - Height-adjustable support table - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 10.0 t stroke: 190 mm table surface area: 520 x 120 mm dayligth: 350 mm column travel between the guideways: 520 mm weight of the machine ca.: 104 kg dimensions of the machine ca.: 910 x 500 x 1210 mm MADE IN ITALY Furnishing: - powerful workshop presses for craft and repair businesses - manual-hydraulic workshop press - 2-way valve with automatic piston retraction - Two-stage descent speed - Height-adjustable support table - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
AYEL-TECH WORKSHOP PRESS TYPE WP 100 -Capaciteit 100 ton -Cilinderslag 400 mm -Werkbreedte 1000 mm -Verplaatsbaar cilinder is -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
new
AYEL-TECH WORKSHOP PRESS TYPE WP 60 -Capaciteit 60 ton -Cilinderslag 400 mm -Werkbreedte 1000 mm -Verplaatsbaar cilinder is -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
new
AYEL-TECH WORKSHOP PRESS TYPE 30 WPM -Capaciteit 30 ton -Werkbreedte 600 mm -Hand mat-bedienbaar -Pressure gauge PRICE IS plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
AYEL-TECH WORKSHOP PRESS TYPE WP 30 -Capaciteit 30 ton -Werkbreedte 700 mm -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V PRICE IS plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS
new
UWM PRESS BRAKE/WORKSHOP PRESS TYPE UWM 50TE -Capaciteit 50 ton -Max druk pomp 25 MPA -Werkslag 220 mm -Max hoogte 680 mm -Max Queen 790 mm -Afmeting table 400 x 800 mm -Afmetingen 1500 x 650 x 1950 mm -Weight of 980 kg -Motor 3 KW/400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
new
AYEL-TECH WORKSHOP PRESS TYPE WP 15 -Capaciteit 15 ton -Cilinderslag 260 mm -Werkbreedte 500 mm -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
new
SAY MAK WORKSHOP PRESS TYPE WP 100 -Capaciteit 150 ton -Cilinderslag 400 mm -Werkbreedte 1100 mm -Verplaatsbaar cilinder is -Pressure gauge -Met V-Blokken -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
new
SAY MAK WORKSHOP PRESS TYPE SHP 100 -Capaciteit 100 ton -Cilinderslag 400 mm -Werkbreedte 1000 mm -Verplaatsbaar cilinder is -Pressure gauge -Met V-Blokken -Noodstop -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
new
SAY MAK WORKSHOP PRESS TYPE SRHP 250 -Capaciteit 250 ton -Cilinderslag 400 mm -Werkbreedte 1200 x 1000 mm -Slaginstelling -Pressure gauge -Noodstop -Weight 3450 kg -Power 11 kVA -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
AYEL-TECH WORKSHOP PRESS TYPE WPB 30 -Capaciteit 30 ton -Cilinderslag 600 mm -Werkbreedte 700 mm -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
AYEL-TECH WORKSHOP PRESS TYPE WPM 10 -Capaciteit 10 ton -Werkbreedte 500 mm -Hand mat-bedienbaar -Pressure gauge PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
AYEL-TECH WORKSHOP PRESS TYPE WPS 100 -Capaciteit 100 ton -Cilinderslag 400 mm -Werkbreedte 1000 mm -Verplaatsbaar cilinder is -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
AYEL-TECH WORKSHOP PRESS TYPE WPS 60 -Capaciteit 60 ton -Cilinderslag 400 mm -Werkbreedte 1000 mm -Verplaatsbaar cilinder is -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
SAY MAK WORKSHOP PRESS TYPE SHP 250 -Cilinderslag 400 mm -Werkbreedte 1200 x 450 mm -Verplaatsbaar cilinder is -Pressure gauge -Met V-Blokken -Noodstop -Weight 2250 kg -Power 7.5 kVA -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
AYEL-TECH WORKSHOP PRESS TYPE WP 30 -Capaciteit 30 ton -Werkbreedte 700 mm -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
new
AYEL-TECH WORKSHOP PRESS TYPE WP 15 -Capaciteit 15 ton -Cilinderslag 260 mm -Werkbreedte 500 mm -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
new
Machine type: Workshop press Manufacturer: RHTC Model: 160 TON M/H-M/C-2_1100 Year of construction: new Offer type: new machine specifications: Version: el.hydr. / sliding cylinder Compressive force:: 160 t Working width: 1100 mm Table: 1100 x 380 mm Piston stroke: 400 mm Drive: 3.0 kW Weight: 1195 kg This is a new machine offer. We therefore ask for your understanding that no demonstration is possible. We would be pleased if our offer finds your interest. If you have any questions, please do not hesitate to contact us. Errors, changes and intermediate sale reserved.
new
Machine type: Workshop press Manufacturer: RHTC Model: 160 TON M/H-M/C-2_1500 Year of construction: new Offer type: new machine specifications: Version: el.hydr. / sliding cylinder Compressive force: 160 t Working width: 1500 mm Table: 1500 x 380 mm Piston stroke: 400 mm Drive: 3.0 kW Weight: 1430 kg This is a new machine offer. We therefore ask for your understanding that no demonstration is possible. We would be pleased if our offer finds your interest. If you have any questions, please do not hesitate to contact us. Errors, changes and intermediate sale reserved.
new
feed under pressure: 2,7 mm/sec pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm feed down: 4,25 mm/sec feed up: 8,22 mm/sec oil pressure max. in the work cylinder: 385 bar oil volume: 26 l diameter of piston: 125 mm column daylight: 920 mm voltage: 400 V/ 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjust in height, • Cylinder Ø 175 mm, piston base Ø 125 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 200 t stroke: 300 mm table surface area: 1900 x 440 mm column travel between the guideways: 1900 mm working feed: 5,0 mm/sec engine output: 15,0 kW weight of the machine ca.: 4.800 kg. range L-W-H: 2.570 x 1.665 x 2.860 mm Furnishing: - hydraulic workshop press with adjustable cylinder - Table height adjustment - V-block tool insert - Pressure gauge The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 100 t, 300 mm
Workshop press Stenhoj 100, press force 100 tons, year of construction 2006, set-up dimensions L=1700mm, H=2300mm, W=800mm, working stroke cylinder 300mm. We sell the Stenhoj 100 because our business has evolved from industrial maintenance to plant construction and the press is no longer needed for this. The press was not used often, in the first few years for normal maintenance work such as changing bearings, etc. In recent years, only occasionally. The press has always provided reliable, trouble-free services and the necessary maintenance such as oil changes have been carried out. It shows the usual signs of wear and damage to the paintwork. The new price today is approx. 10,500.00€ in almost identical design. The machine can be viewed and tested by appointment during our working hours from 06:30-15:45.
new
pressure: 160 t stroke: 400 mm table surface area: 1100 x 635 mm pressing speed: 6,57 mm/sec return speed: 11,62 mm/sec oil pressure max. in the work cylinder: 412 bar oil volume: 40 l dia. of piston: 145 mm column daylight: 1120 mm voltage: 400 V / 50 Hz dist. between pillars (front to rear): 350 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Machine type: Workshop press Manufacturer: RHTC Model: 50 TON HF2 Year of construction: new Offer type: new machine Specifications: Version: manual / 2 columns Compressive force: 50 t Working width: 750 mm Table: 750 x 336 mm Piston stroke: 160 mm Drive: manual and foot operation Weight: 340 kg This is a new machine offer. We therefore ask for your understanding that no demonstration is possible. We would be pleased if our offer finds your interest. If you have any questions, please do not hesitate to contact us. Errors, changes and prior sale excepted.
new
Machine type: Workshop press Manufacturer: RHTC Model: 30 TON HF2 Year of construction: new Offer type: new machine Specifications: Version: manual / 2 columns Compressive force: 30 t Working width: 565 mm Table: 565 x 255 mm Piston stroke: 160 mm Drive: manual and foot operation Weight: 165 kg This is a new machine offer. We therefore ask for your understanding that no demonstration is possible. We would be pleased if our offer finds your interest. If you have any questions, please do not hesitate to contact us. Errors, changes and prior sale excepted.
new
Machine type: Workshop press Manufacturer: RHTC Model: 15 TON HF2 Year of construction: new Offer type: new machine Specifications: Version: manual / 2 columns Compressive force: 15 t Working width: 560 mm Table: 560 x 214 mm Piston stroke: 160 mm Drive: manual and foot operation Weight: 117 kg This is a new machine offer. We therefore ask for your understanding that no demonstration is possible. We would be pleased if our offer finds your interest. If you have any questions, please do not hesitate to contact us. Errors, changes and prior sale excepted.
new
Machine type: Workshop press Manufacturer: RHTC Model: 30 TON M-V Condition: new Offer type: new machine Specifications: Version: el.hydr. / fixed cylinder Compressive force: 30 t Working width: 750 mm Table: 750 x 260 mm Piston stroke: 350 mm Drive: 1.5 kW Weight: 385 kg This is a new machine offer. We therefore ask for your understanding that no demonstration is possible. We would be pleased if our offer finds your interest. If you have any questions, please do not hesitate to contact us. Errors, changes and prior sale excepted.
used
40' CONTAINER / MOBILE WORKSHOP INSULATED / POWER 240V & 3 PHASE POWER 2T OVER HEAD MANUAL CRANE KEMPER WELDING EXTRACTION UNIT
new
pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 11,0 kW range L-W-H: 2200 x 1300 x 2300 mm weight of the machine ca.: 1870 kg. Furnishing: - hydraulic workshop press - Table height adjustment - V-block tool insert - Pressure gauge The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Compressive force: 10 tons Piston stroke: 180 mm Table width: 140 mm Passage (E): 330 mm Passage (F): 95 mm Distance cylinder to table (F1): 200 mm Distance cylinder to table (F2): 365 mm Cylinder movable: 180 mm Width (A): 570 mm Depth (W): 500 mm Height 1 (C): 735 mm Height 2 (D): 1070 mm Weight, approx.: 55 kg Equipment: - Standard with automatic piston retraction - Easy reading of the pressing pressure via pressure gauge - Versatile in assembly and workshop applications - Ideal for bushing, straightening, bending, broaching,... - Robust construction due to welded steel frame - Support table height-adjustable, fixation by means of bolts - Prism pads included
new
pressure: 80 t stroke: 250 mm table surface area: 1040 x 260 mm column travel between the guideways: 1040 mm ajustment speed: 8,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 5,5 kW weight of the machine ca.: 835 kg. dimensions of the machine ca.: 1810 x 700 x 2100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the ...
new
pressure: 60 t stroke: 250 mm table surface area: 1040 x 370 (315) mm column travel between the guideways: 1040 mm ajustment speed: 8,0 mm/sec working feed: 4,0 mm/sec return speed: 10,0 mm/sec engine output: 4,0 kW weight of the machine ca.: 800 kg. dimensions of the machine ca.: 1.700 x 700 x 2.100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounte ...
used
Workshop angle, stop angle MASSI B 750 TGL 6163 90° 750 x 450 mm TGL 6163 im Schutzkasten New ! Dimensions: 790 x 540 x 45 mm
used
Workshop caliper, caliper, with tips, without fine adjustment OWT, OSNABRÜCKER WERKZEUG TECHNIK OWT-30201 0 - 300 mm cm / Inch Scale MPE: 0.05 mm Beak length: 90 mm im Holzkasten used, tested ! Dimensions ( caliper ): 450 x 152 x 10 mm Dimensions ( wooden box ): 480 x 195 x 36 mm
new
pressure: 160 t stroke: 400 mm table surface area: 1100 x 635 mm pressing speed: 6,57 mm/sec return speed: 11,62 mm/sec oil pressure max. in the work cylinder: 412 bar oil volume: 40 l dia. of piston: 145 mm column daylight: 1120 mm voltage: 400 V / 50 Hz dist. between pillars (front to rear): 350 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,7 x 1,0 x 2,5 m • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Contents consisting of milling cutters, indexable inserts, reamers, taps, various screws, boring tools, side milling cutters, indexable insert cutters, twist drills, clamping elements and various workshop supplies Attention: 2 drawers are not included in the scope of delivery as they are sold separately Approx. Onsite Dimension. (l x w x h): 1,000 x 730 x 1,150 mm, weight approx.: 200 kg
used
Description: Contents consisting of workpiece supports, parallel supports, clamping elements, a clamping system from the manufacturer LENZKES and other workshop requirements Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 1,400 mm, weight approx.: 150 kg