wool mc line used for sale

Buhler Paddy table DNTB 48 like never used apllicataions : cereals, oats, rice;;;seed of any type, BUHLER Descriptif hand book available see also our others adds in searching by the keywords : extrusion, breakfast cereals, dehulling line, Enquiriez welcome, shipping to any destination by container, lorry.. . Contact Milin Gentieg cereal Process, France. Bernard .CANO

Qty. 1 Second-hand baby diaper production line Mfc.: Maqmantas Type: Pannolini – 50 IMD Built: 2015 Size of diapers: Mini, Midi, Maxi, Junior Nominal Production: 50 pieces/min. Dimensions: 4800 x 950 x 2050 (L x W x H) mm (without exhauster) Room dimensions: 21 x 5.3 x 3.1 m – L x W x H Voltage: 3 ~ 220 V, 3 ph., 60Hz, 100 A Power: 12 kW Theoretical Weight: 1500 kg Screw compressor: 7, 5 bar The machine can be demonstrated in running conditions.

Used packaging line for capsules into jars made by Pharma Packaging Systems/Robak company PPS capsule counter - 2 pcs Manufacture year: 2015 Production country: England Max capacity: up to 14 op / min capsules of 000 in the amount of 300 pcs up to 80 op / min smaller quantities Counting range: 10 - 300 items Possible packaging: cylindrical jars 150mm in diameter and up to 210mm in height Labeling: self-adhesive wrapping labels Codification: InkJet on the bottom of the packaging Required media: en. electric, compressed air

1 x 'Forward Machinery Industrial Corp'. (Taiwan) 4 roll inverted L calender line, Year of manufacture: 2007, Roll dimensions: 34in (860mm) dia x 157in (4000mm) wide, Peripherally drilled (oil heating), Roller bearings, Motorised nip gap adjustment, Roll bending rolls 2 and 4, Cross axis roll 3, Independent drive to each roll:- Roll 1: 110kW, Roll 2: 150kW, Roll 3: 150kW, Roll 4: 110kW. Finished product width 3600mm. Pick off rollers, Matt finish embossing station, Edge trimming, 19 x cooling drums 355mm dia x 4000mm wide, Dual station surface winder. The line is already dismantled and ready for immediate shipment. There is also upstream equipment available by separate negotiation (high speed mixers, 2 x 100L Banbury, strainer, two roll mills etc).

Make : Roversi Tank Volume :3000 liters Cream Capacity : 1000 Litres to 1500 Litres Double jacketed Kneading Rolls inside the barrel Control panel Stainless steel production area Skid Mounted 2 Door Safety closer See through glass Fully Refurbished on order Manufacturer Roversi Model 3000 L

Unwinding reel / decoiler â?¢ Bandwidth / strip width max. 1,500 mm â?¢ Tape thickness / strip thickness (430 N/mm2) 0.5-2.0 mm â?¢ Coil outer diameter / coil outer - 1,300 mm â?¢ Coil inner diameter / coil inside - 470-520 mm â?¢ Coil weight / coil weight 10,000 kg â?¢ Side shift / side shift . . . . . . . . . . . . . . . . .

suitable for standard crumbs all stainless steel belt width 400 mm with air knife 2,4 kW adjustable speed mobile with outfeed belt dimensions (l x w x h) : ± 2.250 x 950 x 2.300 mm

In-line filling and screwing machine with 5 stations for filling liquid dietary supplements. For PET bottles of 100/500/1000 ml. Max capacity 1300/1000/800 bottles per hour. Adaptation required for new bottle shape !

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

-with 2 flour spreaders -Total length 680cm -with rollers

Saw for Pipe Cincinnati RS 25 PZ S 1992 year 4000 Euro

2000 Ltr Roversi butter Churn Double jacketed to avoid the hiumidity, see-through glass, fins inside the churn to brake down the butter and control panel self mounted. Make: Roversi Tank Volume : 2000 ltr Cream Capacity : Min 500 Litres To 1000 Litres Double jacketed 1 Door with safety closer See through glass Stainless steel production area Hzjsulook Skid mounted VISIT & INSPECT : DERBY UK, DE24 8HL , UNIT 6 ,Dairy Machinery UK Site.

1 aseptically filling Elo-Pak line suitable for ESL milk and fruit juice Int. Designation: new hall composed of: a.) 1 aseptically filling Elo-Pak filling machine Int. No. II 103 built by Fa: Shikoku Type: U-980 A Serial No. 455 Year of construction 2007 with 3 format options, 0.33, 0.5 and 1.0 l Output: 11,000 U/h for fruit juice in use in operation until the end of January 2019. The following annexes to the Elopak line are: 3 rows of individual packaging transport lanes from polycetting, length to Meuerer carton packing system approx. 23 m with curves 3 Elopak ceiling stackers Year of construction 2004; with screw cap magazine with Yet stream transport railways into the 3 lid storage containers 1 carton pack vending machine for 6 units in the box, partially open at the top Type: Ba-6-30; Serial No. 50325-210 Manufacturer: Meurer Year of construc ...

Hollow-chamber plate system Material: PC, PP Extruder: Breyer Screw diameter: 120 mm, L/D: 33 Engine: 200 kW with degassing, Siemens "Simatic OP17" PLC control, vacuum station with water ring pump and condensate pots, sieve changer Gneuß SF75, melt pump Maag 56/56, calibrator OMIPA 2400 mm, 10-fold multi-roll extractor OMIPA, 2 roll extractor OMIPA, protective film laminating station, hot-knife longitudinal separation, OMIPA cross saw 2400 mm R

Product number: 2397P Weber slicer Type: CCS904 Serial number: 7096 Year of construction: 2007 Capacity: 2000 RPM Slice thickness: 0.5 - 50 mm Compressed air: 10 Bar, 150 L/min. Power: 3 x 400V, 50Hz, 10 kW Dimensions: 13400 x 1900 x 2600 mm Including CCW904 weigher, CCR904 rocker, CCA speedloader and CCU portioning unit Multivac thermoformer Type: R530 Serienummer: 115612 Year of construction: 2007 Film width: 560 mm Index: 1200 mm Dye: 3.5 Power: 3 x 400V, 50Hz, 36.5kW Dimensions: 14850 x 1300 x 2450 mm Hard film machine for vacuum and gas flush Pago labeler Type: System 516 Serial number: 212516068 Year of construction: 2012 Mettler Toledo metaldetector and checkweigher Type: XS3 Serial number: 35000430 Year of construction: 2008 With reject Mettler Toledo X-ray machine Type: Safeline R20 Serial number: 3113R20V3268 Year of construction: 2013 ...

Complete Veneer Peeling Line Working Length: 3300 mm

Complete line Minster for EOE lids, diameter 72,8 mm.

Qty. 1 Second-hand strip casting production line Mfc.: EMA-Indutec, Marx, Air Blue, Güntner, Demag, G. Buchholz Built: 1992, 1995, 1997, 1999, 2000 Income material: Scrap Strip width: 300 mm Thickness: 10 – 20 mm – can be reduced! Plate length: 16 m can be extended! Coil weight: 1.5 T (steel) Scope of supply: Induction crucible furnace 20 kV Transfomer Cooling unit Casting machine Duo Mill Stand Coiler Run-out table Quenching Compressor

Qty. 1 Second-hand bonder line Bondern is a process for the surface treatment of metal surfaces and for producing a conversion layer by phosphating. It serves to protect against corrosion. In further processing steps such as deep drawing, the phosphating created serves as a sliding layer. Mfc.: TBA Built: TBA Strip width: 250 – 600 mm Thickness: 2.0 – 4.0 mm De-coiler ID 500 mm OD 600 – 1900 mm Coiler ID 500 mm OD 600 – 1580 mm Plating Double sided: 1.0 – 4.0 g/m² Single sided: 2.0 – 5 g/m² Note: 3 g/m² = approx. 2 µm layer thickness

Qty. 1 Second-hand cut-to-length line Mfc.: Stratega Built: 2006 Direction right to left Strip width: 400 - 2020 mm Thickness: 0.4 – 2.5 mm De-coiler ID 508, 610 mm Weight: 25 Ton Length of sheets: 300 – 2000 mm Speed: 60 m/min. Leveller Tilting shear Magnetic belts stacker Consist of: Load cradle De-coiler Award spire Introduction table Leveller Feeder Towing pinch roll Tilting shear Evaquation shear wasting material Conveyor Magnetic stacker Eletrical panels & Control Hydraulic station Note: The lien has the guillotine that can cut metal sheet with trapez format cause the guillotine Can rotate or can be used as a normal cut-to-length line.

Used manual ultrafiltration line for cottage cheese production from Agros Milko-Polska. Yield 2500 kg of finished product in 8 hours, concentrated to 72% dry matter.

Qty. 1 Second-hand aluminium vertical billet casting plant Mfc.: Wagstaff, Tongrun, Stas Built: 2012 Stopped: 2016 Billet dia.: Line 1: 101.5 – 228.6 mm (4” – 9”) Length: 6300 mm Dia. 101.5 mm – 112 Strands Dia. 127 mm – 76 Strands Dia. 152.4 mm – 112 Strands Dia. 177.8 mm – 72 Strands Dia. 203.2 mm – 62 Strands Dia. 228.6 mm – 50 Strands 1 Qty. 1 Second-hand vertical billet casting line – LINE 1 Molding tables for vertical casting of Aluminium billets of 112 billets with 101.5 mm, 127 mm or 152.4 mm in dia. Other table with 72 billets of 177.8 mm, 203.2 or 228.6 mm in diameter 2 Qty. 2 Melting Furnaces with 60 t capacity/each, and 8 t/h fusion rate, Natural Gas, Regenerative System, Manufaturing by Tongrun in 2011 – China. 3 Qty. 3 Homogenising Furnaces, with 35 t/each for billet, Natural Gas, Cycle 8 t/h average. 4 Qty. 1 Holding  ...

Qty. 1 Second-hand roughing, finishing mills and special equipment Mfc.: DAVY, TMEIC, TOSHIBA, MITSUBISHI Type: 4-Hi Rev. Built: 1997 Revamped & Installed: 2008, 2011 Stopped in 7-2017 Revamped cost of USD 151.0 Mill. from 2008 up to 2011 Finishing mill equipped with CVC Roll plus Technology System Finishing mill – new hydraulic adjustment to increase rolling force to 90 MN Roughing & Finishing mills: Technology Control System (Level 1) Process Models (Level 2) for pass schedule calculation, profile & flatness control (PFC), Pacing system & Material tracking Revamped by SMS in 2011: Roughing mill: Slipper-type Spindles Product capacity: 2,000,000 ton/year Mill capacity: 30 Plates/h Entry Material: Slab T130~300 mm x W1,200~2,200 mm x L2,350~4,000 mm Final Product: Plate T5~180 mm x W1,200~4,100 mm x L max. 25 m Application: Ship building plate & Pipe pro ...

Qty. 1 Second-hand JCO pipe press bending line Mfc.: Samyul, ROBO, Shinsung, ChangSong, Rotech, FANUC, Hyupshun, Ingersoll Built: 2003, 2008, 2009, 2013, 2014 Plate material: Mild steel Plate dim.: 16.0 x 5.2 x 0.08 m – L x W x T Pipe dia.: Φ400~Φ1650 mm Pipe Length: 6.0m ~ 16.0 m Scope of supply: JCO Hydraulic Press Tack Welder Machine Sealing Welder Pipe Heating & Rotating Device Inside Welder Outside Welder Calibration Presses Milling Cutter Cutting Machine Bevelling Machine Compressor

DIMTER finger jointing line model HK 800 suitable for vertical and horizontal zincing ! Suitable for hardwood and softwood ! Principle Dimter: Wood stands - milling unit drives - very good service - and condition incl. soundproof cabins Fully automatic system: automatic feeding of compartment transport Processing automatic stacking and packaging Input lengths: 150 -1500mm Wood widths: 30 - 200mm Wood thicknesses: 15 - 100mm Capacity: 3 packets/min. (800mm) consisting of the following units: - Loading station 3 packages in the buffer (automatic) Package milling machine with double milling head with two chippers and two spindles 10 mm joining length special shape of the fingers (round tips) with automatic glue application (roll) and dosing (suitable for PVA glues) Universal turning and transfer station for horizontal and vertical joining (flat and upright) transverse l ...

RUIAN QUEENSENSE MACHINE DHB-500 film glove production line manufactured in 2020 by Chinese company RUIAN QUEENSENSE MACHINE CO.LTD. is used to produce double-layer foil gloves. The produced gloves, used for example in grocery shops or in production, guarantee effective protection against viruses and bacteria. The QUEENSENSE DHB-500 automatic disposable gloves production line consists of two identical machines, both of which feature a central drive to control all glove-forming mechanisms. The dual unwinding station is equipped with a clutch, which allows infinite adjustment of the film tension and dual inverters for unwinding control. High-precision feeding of HDPE or LDPE material to the sealing position and the final product sorting point is ensured by the installed servo drives controlling the entire process. After changing the heat sealing dies, the RUIAN QUEENSENSE MACHINE DHB ...

Venjakob year of manufacture 1999 Spray guns 4 Water based paint and lacquer and also UV paint acid curing paint? – Not possible now, but can be done, if we change pump, tubes and nozzles Paint recycling - yes Is it possible to apply bets”? Water based? – yes, water based Are the work pieces stackable directly after they come out from the line? (Are they dry so they can be stacked?) – Yes, if we use UV- water based paint but when using normal water based paint or lacquer components must be dried in a shelf What type of products do you run in the line? What materials? – MDF, melamine surfaced doors, components etc. and solid wood components (mainly birch) What are the dimension limitations for the work pieces? – width min/max 20-1200 mm, lenght min/max 350-2750 mm, thickness max 50 mm Spraying machine Venjaob HGS-Duo Venjakob VEN SPRAY DUO Lacquering line sand paint IR UV dry ...

Bos Machine (BMH) with a Sapiens Wood We are a producer of frames, windows and doors and we sell the machine ourselves. The machine has been running in our factory from 2006 to 2022 (16 years). This is a Bos Machine (BMH) with a Sapiens in front of it. The Sapiens is a CNC machine with one robot head and one regular axis. He then proceeds to the tenoning bench (for the crosscut processing). The first shaft is a saw followed by 3 vertical shafts (approx. 500mm long) and behind them two more motors for round edges on the wood. Then he moves on to the milling. The first cutters profile the edge finish and the second cutters profile the inner profile. The first milling cutters consist of 1 milling cutter which profiles and immediately makes the wood thickness, followed by 4 milling motors and then another 5 milling motors for profiling the inner profiling. Technical status: The machine is  ...

Single-screw extruder • Type: 120/28 LD • AC Motor - 75 kw • Screw speed: 150 rpm. • Extruder cylinder: Air-cooled • Degassing zone Sieb changer • Strandhead Water bath: 4.5 m Granulator SG 200 Classic sieve Silo with conveyor fans: approx. 1m3

Linear modul+- 0,05mm, MKR15-65, 1140-060-00/MA02/970mm, Rexroth, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - Linear module with toothed belt drive, - Repeatability +- 0,05mm, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Linear actuator, DGPL-050-865-PPV-A-KF-B, 161795, Festo, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Stock# UG6311 Second hand line for production caramel candies, mono flavour. Line can produce fruit taste candies, mint candies or milk (fat based). Reporting output up to 468 kg/h. Line consist of: - Caramel mass preparation section - includes caramel cooker TC&C Process designers 24" Schlagenkocher, manufactured by Snelders, new 1997. Working output up to 1000 kg/h. - Winkler & Dunnebier forming line type 163.04, new 1997. Reported output up to 486 kg/h. Forming section has dimensions: 920 mm x 280 mm x 40 mm. Forming dies in motion - 118 pcs. Number of candies per one mold: 240 pcs. Machine works with speed up to 6.5 molds per minute. Working dimensions: L 11.85 m x W 1.9 m x H 2.83 m. Final product discharged at height 850-950 mm. Power consumption 40 kW

In line filter,rustfrit stål,11 l. Domnick Hunter,for 3 patroner.

Product number: 2511 Type: T.T.O.R. 125 Year of construction: 2014 Capacity: 500 kg/hr Cube size: 10 x 20 mm Belt width: 295 mm Drying tunnel: 18000 mm Cooling tunnel: 4000 mm Big bag infeed bunker Capacity: max 1200 kg Platform height: 1550 mm Elevating height: 3000 mm Dimensions: 3100 mm x 2020 mm x 4750 mm. Box forming machine Box size: 210 x 100 mm Belt width: 100 mm Dimensions: 1500 x 1400 x 1630 mm Box closing machine Belt width: 100 mm Distance between dividers: 330 mm Dimensions: 2360 x 700 x 1600 mm Including form-, fill- and sealing machine for sugar sticks Rows: 5 pcs Package: 2-5 gram Capacity: 2-5 kg/min. Paper width: 200 mm Dimensions: 1400 x 1150 x 2200 mm abcs://abc.youtube.com/watch?v=2Uixi7OOdqI

In-line hole drilling machine Scheer DB 4 L x W x H: 1500 x 1500 x 1900 mm Weight approx. 1000 kg Built in 1980 1 aggregate vertically up 1 aggregate horizontal - vertically pivotable The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

see pdf attached

New, original cylinder liners MAN B&W never used for 50MC engine

Make : CMT Model : FL 1400 Use : Cooking/ Stretching and Moulding Line for Hard Cheese and Soft Cheese Condition : Very Good Consists of : 1. CMT Cooker and Stretching 2. Screw Hopper for Infeed of Moulder 3. Moulding machine with two sets of moulds 4. Hot water tank 5. Hot water Boiler tank 6. Control panels 7. Change parts for CMT

Unused cylinder liners, never used MAN B&W

LINEAR TRACK RAIL ALUMINUM FRAME , FOR MACHINE/EQUIPMENT BUILDING Working length: 4060mm The traveling trolley size: 650x1700mm

Qty. 2 Second-hand stainless steel tube production lines Stainless steel tube mill plant for production of dia. 48.6 mm x 3 mm - 2 lines Brand: Hyundai Precision Type: Tig welding type (DC 600 A) Built: 1994 Revamped: 2020 Roll stand a reducer (changing of bearing ) New welder New heat treatment system for NO 1 mill only! New conveyor & packing system New bead grinder (wheel type) for No 1 mill New electrical panel Mill speed: 3.5- 4 m/min Product pipe: Stainless steel pipe Structural pipe (ASTM A312, JUST 3459, KS D3576 (205/pressure pipe) Strip Width: 152.6 mm (max 170 mm) Thickness: Max 3 mm Pipe dimensions: Dia.: 12.7 - 48.6 mm Length: 6,000 mm Coil weight Max 2 tons Tools: (8 sets) 12.7 ømm 15.8 ømm 21.7 ømm 22.2 ømm 28.6 ømm 34 ømm 42.7 ømm 48.6 ømm

Type SPF 6000/1050 complete stainless steel suitable for thermo-oil heating (= 659 kW) Band length 6,000 mm Track width 1,050 mm infinitely variable speed suitable for fire protection Executable Oil level control Circulation pump Dirt transport Filter mechanical lifting device Dimensions (L x W x H) : ± 9,000 x 2,600 x 3,500 mm weight: 4,900 kg Capacity: 3 x 400V, 50Hz, 12kW

Short stroke unit, linear guide, 52.25.4.0150, travel 150mm, fibro, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has never been in operation, is completely new, but not in the original packaging. The drive of the unit is a plunger cylinder system with adjustable end position damping. The linear movement is alternately generated by one of the two oil-loaded cylinders. Operating pressure 80 to 120bar, Assembly and operating instructions, spare parts list and drawings Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we will refund the purchase price.

According to description pdf attached complete line for profiles + WPC profiles

Extruding system with cross-spray head for sheathing of small profiles/filaments consisting of: 30 mm extruder with tool, water bath, extractor and winder Optional with memory for role change

Merz KT160 semi-automatic packing line for packing sticks into pre-folded cartons , 2 lanes (previously the Merz was fed by two 1-lane stickpack machines), inserting of the sticks using 2 Stäubli robots (1 robot per lane), suitable for sticks with a width of 15 to 25 mm and a length of 60 to 100 mm, maximum possible carton size (pre-folded) 115 x 125 mm (WxL), count of 35 to 100 sticks per carton possible, capacity up to 63 sticks per minute, electrics 400V/50Hz/3.5kW, compressed air 6 bar, Siemens SIMATIC Touch Panel

Laminating unit (not complete machines) The machine is used for the coating of a product web with simultaneous Laminating a second goods railway. Products = 200-800my PET with 40-80 my PE Working width max. = 1600 mm, Speed = 70 m / min Approximately 1000 operating hours New price approx. = 400,000 euros) Accessories: 1x Barrel melter 1 x storage unit 50 liter / 86 KW Nozzle

Qty. 1 Second-hand cut-to-length line Mfc.: Ungerer Built: 1966 Material: Stainless steel Strip Width: 300 mm- 1500 mm Thickness: 1.5 mm (stainless steel) Cut length: 750 mm- 6000 mm Length adjustment: mechanical Coil weight: 9.000 kg Coil min/max inner Ø: 500 & 600 mm Shear Type: Rotary Hydraulic system Stacker capacity: 2000 ton PLC: Allen Bradley Scope of supply: Decoiler Crop shear Edge trimmer Leveller PVC film applicator Stacker Camera system

RUIAN KODA MACHINERY ENG-500 film glove production line, built in China in 2020, is designed to produce high-quality double-layer film gloves that are used in e.g. grocery shops or in production. The high-quality steel construction of the automatic glove making machine ensures high stability even at maximum production speeds of up to 500 gloves per minute. The film glove production line uses moulds to produce disposable film gloves with a maximum length of 400 mm and a width of 300 mm, providing effective protection against viruses and bacteria. The 2.2 kW YASKAWA servo drive, which controls the entire process, ensures high precision in feeding the material to the sealing position and the sorting point of the final product. The ENG-500 film glove making machine also allows the production of other film products, such as breakfast pouches, after changing the heat sealing dies. The au ...