wool mc line used for sale

SACMI rotary compression line for plastic caps 38 mm. with control video system.

Used line to grind, capacity 300-600kg / h. (depending on the product) The line is equipped with: - Mill REKORD - Cyclone Filter - Centrifugal fan for air transport.

Liners Wear less than 0.05

ULTRASONIC INSPECTION - TESTQMATIC - TYPE: SPA-2N, L=5-60 M, 1 M/SEC., 1988 EDDY CURRENT INSPECTION - MPA - 1989 RAIL PROFIL MEASURING DEVICE - SCHMITZ & SÖHNE AND BSB - 1989 PRODUCT HEIGHT: 95-165 MM, HARDWARE & SOFTWARE

1 x BUZULUK 1920mm wide Four-roll 'L' calender - Type: 03506 - Rolls dia 710x1920 mm - Year of manufacture: 1989 - Peripherally drilled rolls - High pressure hot water heating (Steam 1.6 and 3.2 MPa) - Motorised nip adjustment to rolls 1, 2 and 4 (30mm adjustment) - Cross axis on roll 3 (0-30mm) - Roller Bearings - Unidrive gearbox with DC motor to each roll - Rolls 1 and 4: 46 kW - Rolls 2 and 3: 77 kW - Working speed of 4th roll max 60m/min In very good condition.

Used pet blowing line: - Blowing SIDEL SBO 4/6, New 1997, capacity 4800 bottles/h,the dimensions of 5100 mm x 7700 mm x 3300 mm - Blow molding cooler Sogequip NRP 25, New 1997. - SIDEL preform feeder, New 1997 - Tippler preform BT-2 03, New 2002

Recon cylinder liner

Bushing obsolete, recon

Liner without APR - almost new

Used UHT milk packaging line with a capacity of 5000 pcs./h. Possibility of pouring in packaging 0.25 L, 0.5L, 1L. New 1996. The line consists of the following order: 1. Filler from SIG Combibloc 2. The applicator straws 3. The applicator fitmentów (pouring beaks) 4. Cartoner 5. Foil machine 6. Transporters

new cylinder liner for Deutz 545

new cylinder liner for MWM 348

Reconditioned cylinder liner for Deutz 528

New cylinder liner for Deutz 545

New cylinder liner for MWM 348

Description: Extruder Müller ELK 60-28 Manufacturer: Müller Type: ELK 60-28 Year of construction: 1995 Condition: very good Type of offer: second-hand machine Location: D - North Rhine-Westphalia Technical data: Müller extruder machine 40,000 h Runhour type: ELK 60-28, profile extruder control:-year: 1995 injection unit screw diameter mm: 60 other ELK 60-28 d 57 KW

Qty. 2 Second-hand pickling lines Mfc.: Sundwig Built: 1968 Tank of clean HCl: 50 m³ Tank for dirty HCl: 50 m³ Strip width: 1525 mm Qty. 3 Tanks interconnected one for each bath 310 m³ Qty. 3 Baths HCl 152.5 m Double bath pre-washing water Bath for final water washing Heater Chimney for taking out the acid vapors Acid pumps Auxiliary pumps Leveling machine Mfc.: AEG-EMG Built: Oiling machine Mfc.: Sundwig Built: Coiler Mfc.: Sundwig Built:

Complete coffee roasting and packaging line consisting of: coffee bean silos, coffee roaster, coffee mill, vacuum packaging machines (125 gr, 500 gr , 1000 gr) Price new 1.200.000 Euro For sale, price on request

Qty. 1 Second-hand JCO pipe welding line Mfc.: Korean Company Installation date: 11 - 2008 Production types: KS, JIS, ASTM, API, Material: API 5L. 2B.X-80under mild steel Product capacity: 70,000 ton/year Product size O.D.: 406 – 1676 mm - 16”~66” Length: 5~16 m Wal Thickness: 9~80 mm Voltage supply: 440 V or 380 V, 220 V, 60 Hz Manufacturing process: Plate stacking Edge Milling Pre Bending Press Forming Tack Welding Welding Calibration Machining Pipe Ends Hydro Static Test NDT (RT & UT)

PRECAST LINE VOLLERT FILIGREE AND DOUBLE WALL LINE precast Filigree and double wall production

Linear axis for KUKA KR6/16 KUKA KL1000 CV high Built in 2007 Length 4500mm .

Linear axis for KUKA KR15, KR6 Length 2m .

welding line for galvanized and black pipes.

Qty. 1 Second-hand extrusion press line Mfc.: 3TC, Allen Bradley, Rexroth, Gautschi, Elhaus, Nederman, Hydrotec, Marx GmbH, Truninger, Ekatech Force: 3500 MT Built: in 1960’s Pressure: 315 bar Billet dia.: 343 mm x 900 mm (can be modified 14 x 1.0 m) Modernisation: 2011 Complete exchange of control system on press to Allen Bradley Control Logix including encoders for Ram, Container and Shear. Change of pump controls to Bosch Rexroth HS4. 2012 Complete change of hydraulic system (excluding pumps). New side cylinders and container cylinders. Safety rebuild of press and with change of PLC to Allen Bradley Control Guard Logix L72S (which is the current CPU). Change of control system of billet furnace. Complete new electrical system and integration of logic into the press PLC. Modernisation of gas burners in the furnace. 2013 Change of one of the main pumps to Bosch Rexrot ...

Qty. 1 Second-hand taper pole pipe production line We have following taper pole pipe production line for sale Mfc.: CMF, Delem, Merkel, Bosch, Nachi, YSD, ESAB, (France, Korean, Japan and Chinese Manufacturer) Built: 2006 Stopped: 2012 3. Product Capacity: Profile 5,000 ton/year / Round pipes 10,000 ton/year i. (Capacity : Profile 6.9 pcs/Hr, Round 3.6 pcs/Hr) Price: Please provide us with your offer! (Further information can be submitted on request!) Production Description Size for Product Pole or Pipe type Conical Pole PolygonalPole Round Pipe Thickness mm 2.6,3.7,5.2,7.5 10 2.6,3.7,5.2,7.5 10~20 20~38 O.D mm ?190 ~ ?463 ?190 ~ ?820 22”~ 32” Length M 2.45 ~ 16.0 2.45 ~ 16.0 6.2 ~ 12.8 Rake About 0.43° About 0.43° Intensity Mpa T.S=510, Y.P=360 T.S=510, Y.P=360 T.S=650, Y.P= 50 ...

Many thanks for your interest on our second hand machines, please find follow our offer: Complete Waffle production plant, consiting of: manufacturer : Danger Wafer oven Type : WM 52 plates YOM : ca. 1975 - 1980 heating : natural gas or propane waffle sheet : 470x290 mm deep karee different : automatic sheet take off : Cooler and Fully automatic Hebenstreit WZ-EM wafer spread line for two colours manufacturer : Hebenstreit Type : WZ-EM YOM : 1991 output capacity : up to 50 sheet/min. wafer format : 290 x 470 mm bis 350 x 480 mm dimensions : ca. 11000 x 1300 x 1700 mm different : Film- und Kontaktstreichverfahren consisting of: - wafer magazine - First WZ Cream station - cover station - second WZ cream station - stack station - cover station - Pressing device We offer this machine in 'as is' condition, without warranty, ex Ware ...

Board repair line with double end profiling line in top condition Workpiece parameters of the plates: Min.: 900 mm x 200 mm Weight min. : 17 mm Max .: 5000 mm x 1250 mm Max. Weight: 60 mm Weight: max. 150 kg < Accuracy: +/- 0.2 mm The portals have a max. Clock power of: max. 6 cycles / min The max. Partial performance: 18 parts / min (DEP line) Year of construction 2008 Condition: good (Original price of the line 2008 Euro 4.9 million) Consisting of: Feeding station with feeding rollers, Automatic vacuum lifting table for lengths up to 6 m Conveyor systems Repair line 1 Turning station Transfer service Repair line 2 automatic vacuum lifter for stacking (6m) Stacking roller conveyor Control cabinet with machine control Profilfraessanlage Stacking Tables; very well

Rice Robotics incl 2 x 2 axis robot control cabinet / control absolutely mint condition Year 2009 (ca 300 hours run) Height approx. 2.0 m Width ca of 4.0 m consists of: 2 columns 1 driving beam 2 x 2 axle robot 2 Robotics control cabinets Switching and control documents

Qty. 1 Second-hand plate milling line - never used Mfc.: SELEMA Type: PMM Built: 2014 Max. scalping area: 1800 x 4000 mm Height: 6 – 200 mm Entry plates planatory tolerance: max. 0.4 on width max. 0.2 on length Entry plates thickness tolerance: +/-0.2 mm Thickness accuracy: +/- 0.1 mm Min./max. milling depth (single milling: 0.1 / 1.5 mm Positioning accuracy: +/- 0.0125 mm Moveable table stroke: 10 mm Movable table speed: 2.5 m/min. Mill dia.: 2.1 mm Mill speed: 490 RPM Milling surface roughness: < 0.25 Ra with cut-off = 1.5 mm & new milling tools

Qty. 1 Second-hand Twin-Roll aluminium strip caster Manufacturer: Castal Ltd. Built: Type: MC-410 1350 mm Twin-Roll Aluminum Continuous Strip Caster Cast Strip Width: 1350 mm max 53.15" Cast Strip Thickness Max.: 12.0 mm .472" Min.: 4.2 mm .165" (4.2 mm achieved by production, not just design capacity) Casting Speed: 1050 alloy = 1.5 mton/hr achieved 3003 alloy = 900 kg/hr achieved Caster Configuration Horizontal: 15 degree tilt

Qty. 1 Second-hand carousel baitec painting line Mfc.: Nordson Type: Sure Coat Built: 2002 Capacity: 150profiles/h Max. profile length: 7.0 m Qty. 10 electrostatic guns Capacity: 5 profiles inside oven

RECON Part number: 300030P ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping station Mfc.: REXTON – BOSCH Line parameter control panel Cases with electronic control system of the line-2 pcs. Station of preparation, drying, pressing the graphite sleeve of the crystallizer. C ...

PVS 125Hui or PVS 150 Hui drive 15 or 22 KW cutting kit or emulsifying module in 125 or 150 mm size available Dre PVS Hui is 125 or 150 an Inotec with an emulsifying module to an equally moderate consistency and ensure smoothness of various products and Proruzieren such as: Paste soup ketchup Mayonnaise Pesto ointments Smoties bread on strokes nut creams and other products

Used Puff Pastry Make-Up Line TROMP, Type: 180.01.011 -Reconditioned- - Table length overall: 7.900 mm - Conveyor belt width: 650 mm - complete with guillotine and filling depositor Condition: Very Good, reconditioned The line is in a very good condition and ready for operation. Inspection and test run are possible at any time.

Laminating line for pizza dough consisting of: Laminating line for pizza dough, consisting of: Extruder 3 x pressure roller Cross roller Calibrating unit Folding station 2. folding station Satellite head Flour shakers Cross roller Cutting station Transfer paper Manual rewinding

Used crown corks press SACMI /Italy/ type PTC 027. Perfect working condition. 27 dies, 27 strokes. Produced in Italy.

Used lining machine PMC 250. Profile 916. Produced in SACMI Italy. Perfect working condition.

Thank you for your interest in our gum extruder system we offer you as follows: many thanks for your interest on our new chewing gum extruder plant, please follow our offer find: AUTOMATIC EXTRUDING; ROLLING AND SCORING MACHINE 7 ´ ´ /. COMPLETE LINE for production of chewing gum sticks and Chiclets Manufacturer: WLS Type: Chewing gum Extrudier-, rolling and cutting machine gum extruder, rolling and cutting system Product: Chewing gum sticks and Chiclets Size (working width): 7 ´ ´ / 177mm other dimensions are possible on demand Type: WLS RAS 7 "with manual take-off Capacity: Approx stick gum. 200-250 kg / h / Chiclets approx. 250-350 kg / h Number of rolling stations: 4 Number of cutting stations: 2 Electrical: 400V 3 ph 7 "ROLLING AND SCORING MACHINE incl. EXTRUDER Conveyor belt is covered with powderin ...

COMPLETE PANCAKE LINE for the production of plain, cherry, apple, pineap-ple, etc. pancakes Very little used, only 3 weeks in test production After that the management decided to invest more in existing pizza line and cancelled new products pancakes Pancakes 32g ø 80mm (According to pre-owner) â?¢ SCHENK T4096-5035-8 V1.0 contact fryer For baking of dough or meat products competely stainless steel, electrical heating, total length 11 m turning station, complete with 2 DáBáR TSA 800 fat spraying units 22 noz-zles, only used for testing purposes, like new â?¢ ALIMEC DOSATRICE dosage unit Closed for dough with 22 dosing heads with a max. dosing weight of 36 g per dosing head, only used for testing purposes, like new â?¢ MONDINI DTT/LC80 Dosing line for fruit pieces, 22 dosing heads, only used for testing purposes, like new â?¢ 2 DOMINO transport trolley ...

Komplette Hackanlage LINDNER 150/400 37kW mit Vibrorinne ca. 17 m, Siebzone ca. 5m, Bogenfoerderer ca. 6 m Hoehe, Laengskratzer in 3 Bunker ca.12m, Trommelsieb; ready for work

Caramel candy production line, mono flavor. products: - Fruit candies (mono flavor) - Mint candies - Milk (fat-based) candies (same as Werther's Original) The line consists of: 1. Caramel cooker, TC&C Process designers 24" Schlangenkocher Producer: Snelders, Man. year 1997 SN: 96496, Capacity 1t/h 2. W&D forming line (Winkler & Dunnebier) Type 163.04 Man. Year 1997 SN 3671 Productivity 486 kg / h (homogeneous products weighing 5.2g) Control: Siemens Device dimensions: Length: 11.85 m Width: 1.9 m Height: 2.83 m Height of products output: 850-950 mm Energy consumption approx. 40 kW Form: Dimensions: 920x280x40 mm Number of forms in motion: 118 pcs. Number of products per mold: 240 Production speed: 6.5 forms / min Shape of the product: exactly like Werther's Original It is possible to present lines during work. Training is possible both at the locatio ...

For sale complete line for plastic caps, include: 1. CCM48 with moulds and CVS 2. cooling system 3. slitting machine Perfect condition. Working at moment. Origin Italy.

Chromium Plating Technology The Modern chromium plating technology. The year 2009 and is in service since then in single-shift model. The type of chromium is hexavalent. The line is equipped with automatic transport system for moving of girders among the tanks within the line lengthways and crosswise. There is as well a powerful ventilation system installed above the production line. The Basic purpose of investment is chrom plating of towel radiators of various types and dimensions. The Average quantity is 2 pcs. of radiators per girder. The Maximum product size for application is 2.000 mm in length, 1.400 mm height and up to 250 mm width. Capacity The planned capacity of the technology in two work-shifts is about 25.000 PCs. Per year. The cycle time per girder achieves 12 minutes. There is as well a possibility of capacity increase due to installing of additional chemical tanks with ...

Qty. 1 Second-hand cut-to-length line Mfc.: FIMI, SSW Type: Multiblanks line 1850x2.5 Built: 1995 Stopped: Strip width: 300 – 1850 mm Thickness: 0.3 – 2.5 mm Length: 300-8000 mm Line speed: 85 m/min. Coil weight: 22.5 T Scope of supply: 1. Load coil 25 ton 2. Coils centering 3. 25 ton unwind rod 4. Wire guide photocell 5. Table introduction aprirotolo 6. Group introduction 7. Cutter fly shear 8. 6° FIMI straightener 9. Apply film 10. Circular shear 11. Deceleration/Connection table 12. Wrap waste 13. Ansa passage table 14. Measurement wheel 15. Unique rotary shear 16. First evacuation conveyor 17. Second conveyor for evacuation 18. Scrap unit 19. Autom. wagon for pallet insertion 20. Stacker with palette and air breath 21. Evacuation chain with weight and semi-automatic strapping machine 22. Second evacuation chain 23. Hydraulic units 24. Electrical pan ...

Qty. 1 Second-hand aluminium complete log casting line Mfc.: GAUTSCHI & SISTEM TEKNIK & ASSIMAKIS Built: 1990’s Refurbished in 2014 Capacity: 75 T/day 22 000 T/annum Log dia.: 7” & 8” Log length: 7 m Requested area: approx. 80 x 25 m 1500 – 2000 m²

see picture for data. Table hoehen-adjustable. mass approx.: 1.55 x 0.8 x 2.1 m high

Travel distance 3350 mm ; Very good

Barrel filling line complete (new Waagevon Bizerba, control panel and filler neck Bedieteil Bizerba iS30 Scales Bizerba type 2000/4000 VE-L 2250 piece barrel bag (new) with 3500 piece barrel bag sealers (new) NETZSCH with dosing unit BJ. 1983 with 80 piece barrels with lids and 80m EW pallets