wood chip used for sale

Only 1.6 operating hours Auction-ID: A3-46111-18646

wood chipper Engine: JCB-E460PE petrol engine Engine type: 4-stroke OHV, 1-cylinder Engine capacity: 457 cc Engine power: 15 hp Starting: Electric start and pull starter Drive: Belt Drive Chopping method: Flywheel system (disc system) Disc diameter: 600 mm Drive speed: 1800 rpm Blades: 2 chopping blades + 6 shredding blades Max. branch diameter: 120 mm Feed opening: 588 × 440 mm Input channel: 278 × 167 mm Ejection tube: 360° rotatable Safety: emergency stop Fuel: Petrol fuel tank: 6.5 litres engine oil: SAE 30 / 15W40 Oil capacity: 1100 ml chassis: mobile chassis Wheels: pneumatic tires Wheel diameter: 16 inches (400 mm) Towing device: ATV tie rod (not omitted) Noise level: 120 dB Dimensions (L × W × H): 276 × 98 × 173 cm Net weight: 260 kg Included: manual and tool kit Condition: unused, in w ...

Connection: 230V Auction-ID: A1-51276-783

Equipped with 420 cc 12.4 HP petrol engine 1 cylinder Electric start unused Auction-ID: A1-47396-1148

Engine: 5.5 kW / 7.5 hp electric motor 380 Volt Starting system: Electric start, Max. diameter branches: 10 cm, Total weight: 190 kg, Fuel: Mains electricity, Ejection height: 150 cm, Input height: 109 cm, Knife work: 30 cm wide knife drum with two (reversible) blades and a counter knife, Funnel mouth input size top: 30 x 15 cm. With own wheel set, Dimensions LxWxH: 259 x 80 x 150 cm Auction-ID: A1-47396-2409

Infeed width: 720 mm infeed height: 330 mm rotor flight circle: 1000 mm number of cutting knives: 2 piece number of counter knives: 1 piece infeed: 2 x 3 rolls motor power: 110 kW screen perforation: Ø 30 mm machine weight: ca 7,800 kg

Artec mini table lathe C2x300 tips size 300 mm + 8 PCs chisel set Mini table lathe C 2 and 8 PCs. HSS cutters set now in the Westfalia savings Kit. C-2 the spindle speed variable from 200-2500 RPM via a potentiometer is adjustable at the mini lathe. About a 80 mm three-jaw chucks can be clamped workpieces easily. The workpieces can be supported with a tailstock with MK 2-recording. By a quad-steel holder the cutters can be secured, designed for 8 mm cutters. Also thread can be cut with this mini lathe 1.5 mm pitch. All materials with normal strength can be edited. (Aluminium brass steel). Technical data: centre height 90 mm centre distance 300 mm spindle bore 19 mm tailstock intake MK-2 thread cutting range 0.2 1.5 mm speed range 200-2500 U / min variable power 250 Watt/230 V Plan route 65 mm Oberweg sled 55 mm Quill trail 50 mm Dimensions Lxwxh approx. 700  ...

Ceramic and plastic vibratory grinding and polishing chips / porcelain chips balls, triangle, tristar, cylinder, elipse, pyramid, cone... sizes and prices on request

Three-point wood chipper, drive PTO 540 – 1,000 rpm, 4-blade chipping disc, feed up to 160 mm, Chip length 15-50 mm, power requirement 18-60 kw. Machine weight approx. 600 kg. Oil motors for wood feed leaking, one flap on the feed funnel loose, no feed electronics installed, electrical emergency stop available. Other wood chippers available - also motorized machines. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for facility and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping work and disposal, environmental care, engines and more...

Magnetic chip conveyor of a PFAUTER PA320 can be used universally. Length 135cm

Radial fan, chip extraction blower, fan, extraction, chip blower -Motor power: 15 kW -Inlet connection: Ø 350 mm -Outlet connection: Ø 250 mm -Dimensions: 1050/1060/H1240 mm -Weight: 276 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Inlet connection: Ø 600 mm -Outlet connection: Ø 600 mm -Dimensions: 1600/1400/H1800 mm -Weight: 800 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 18.5 kW -Speed: - rpm -Volume flow rate: approx. 7000 m³/h -Total pressure: approx. 2800 Pa -Inlet connection: Ø 280 mm -Outlet connection: Ø 350 mm -Dimensions: 1120/840/H930 mm -Weight: 284 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Volume flow: unfortunately not visible -Total pressure: - da Pa -Inlet connection: Ø 700 mm -Outlet connection: Ø 700 mm -Dimensions: 1750/1700/H2460 mm -Weight: 900 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: approx. 22 kW -Speed: not visible -Volume flow: not visible -Inlet connection: Ø 280 mm -Outlet connection: Ø 450 mm -Dimensions: 1050/900/H920 mm -Weight: 280 kg

Spaen centrifuge in the run-through process CEPA Padberg Y. 1986 1400 rpm Diameter 500 mm Spaene throughput up to 600 L/per hr = approx. 1.2 to. / Hour incl Spaene supply Plant Tuev prued until 2016 (last check see sticker) In the fully automatic AS series, short rieselfaehige Spaene are continuously and equally fed from above via a foerderer of the centrifuge. Entoelung short, rieselfaehiger spaene, aluminium and steel Continuously Up to 600 l/h

CATALOG NO. HZ017 PRODUCT FEATURES The manufacturer guarantees the quality of treatment The use of technology Viber shaking off Power is another milestone in the production of high-performance exhausts sawdust, which aim to provide the same fixed parameters during the entire extraction cycle. Lashing equipment in the electronics and engine technology Power Viber allows you to constantly monitor the status of dust The automatic vibratory cleaning the filter cloth - during the break, and during operation of the filter allows for constant monitoring of correct operation. The filter used in our odciągach was built from the filter elements of the expansion element, in which you enter the pipe. It is intended to produce a large expansion of air and, consequently, will result in free fall all sawdust and other waste containers / bags. Reliability confirmed by the factories every day s ...

Collecting pan, floor pan, collecting container, flat steel pan, collecting pan for coolant liquid -Collecting tray: for chips with coolant liquid, 1200 x 800 mm -Trough height: 400 mm, can be shortened -Rectangular cutout: 420 x 215 mm -Dimensions: 1200/800 / H400 mm -Weight: 10 kg

Centrifugal fan, chip extraction fan, fan, suction, chip blower, high performance fan -Motor power: 5.5 kW -Speed: 2895 rpm -Volume flow: 1060 m³/h -Connection input: Ø 200 mm -Connection output: Ø 115 mm -Dimensions: 775/1000/H1350 mm -Weight: 170kg

Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg

Conveyor belt / chip conveyor belt for dowel drilling machine Nottmeyer or similar specifications: • Condition: new • Length (mm): approx. 7520 • Width (mm): approx. 770

Manufacturer: SOMMERMEYER Filtertechnik GmbH Type: SF 38 Y.O.M.: 1997 Conveyor length total approx. 3000 mm Throw in: approx. 1300 x 400 x 400 mm Ejection height approx. 1300 mm Drive Gearmotor 0.25 kW 220/400 V Coolant pump Brinkmann TB303/300 160 l/min H: 18 m 1.7 kW 230/400 V Total dimensions: approx. 3000 x 1600 x 1700 mm All items are checked for function before delivery, if technically possible! Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Jensen A 3.3-245 Z, three-point attachment for PTO drive 540 rpm, 2-knife chopping disc, 2-roller feeder for wood up to 16 cm (feed opening max. approx. 160 x 245 mm) with adjustable feed speed, control pre-stop reverse, own closed hydraulic system, rear lights according to StVZO, toolbox below the feeder funnel. Weight approx. 700 kg. Well-preserved machine with age-related wear and signs of use, paint defects, rust, operational. Markenfabrikat made in Germany" (Jensen - since 1884). More wood chippers - also motor machines in stock!

The cutting waste falls onto the infeed conveyor belt (GFR), which is installed below the guillotine cutter. From here, the waste is transported onto the adjacent upward-moving conveyor belt (WFL) and disposed off in a paper container. The belt can be positioned to the right, to the left or in line with the infeed conveyor.

Wood chipper/ wood chipper DONAR 5810K Chopping machine #311001 Specification: Power: 580 hp Weight: 26 000 kg Emission class: Euro 6E Equipment and description: K = constant fan speed Diesel engine: Mercedes NNV, 6 cylinders Euro 6E Number of Axes: 3 (66) Maximum speed: 80 km/h Shredding of hardwood up to 60 cm, shredding of softwood up to 80 cm, throughput up to 300 lcm (depending on material) Length: 8,000 mm, Width: 2,550 mm, Height: 4,000 mm Drum diameter: 1,000 mm Number of chopping blades or cleavers: 6 (single-edged) or 12 (double-edged) Inlet width: 1,200 mm Inlet height: up to 800 mm, screening area: approx. 2 m2 Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

Wood chipper/ wood chipper DONAR 5810K Chopping machine # 311002 Specification: Power: 580 hp Weight: 26 000 kg Emission class: Euro 6E Equipment and description: K = constant fan speed Diesel engine: Mercedes NNV, 6 cylinders Euro 6E Number of Axes: 3 (66) Maximum speed: 80 km/h Shredding of hardwood up to 60 cm, shredding of softwood up to 80 cm, throughput up to 300 lcm (depending on material) Length: 8,000 mm, Width: 2,550 mm, Height: 4,000 mm Drum diameter: 1,000 mm Number of chopping blades or cleavers: 6 (single-edged) or 12 (double-edged) Inlet width: 1,200 mm Inlet height: up to 800 mm, screening area: approx. 2 m2 Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

Wood chipper/ wood chipper DONAR 5810K Chopping machine #311009 Specification: Power: 580 hp Weight: 26 000 kg Emission class: Euro 6E Equipment and description: K = constant fan speed Diesel engine: Mercedes NNV, 6 cylinders Euro 6E Number of Axes: 3 (66) Maximum speed: 80 km/h Shredding of hardwood up to 60 cm, shredding of softwood up to 80 cm, throughput up to 300 lcm (depending on material) Length: 8,000 mm, Width: 2,550 mm, Height: 4,000 mm Drum diameter: 1,000 mm Number of chopping blades or cleavers: 6 (single-edged) or 12 (double-edged) Inlet width: 1,200 mm Inlet height: up to 800 mm, screening area: approx. 2 m2 Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

Wood chipper Doppstadt DH 812Q Chopping machine Specification: Category: Tractor Chippers Manufacturer: Doppstadt Power: 580 hp Weight: 19 000 kg Equipment and description: 2-Ash Walker Length (mm): 6,360 / Width (mm): 5,039 / Height (mm): 5,834 Transport width (mm): 2,539 / Transport length (mm): 6,414 Chopping drum: Knife 6 pcs. Hardwood logs up to approx. Ø 480 mm, softwood logs up to approx. Ø 600 mm Feed height: 950 mm / Feed width: 1,200 mm Rotor diameter: 1,000 mm Rotor width: 1,200 mm Loading height: approx. 1,400 mm Filling width: approx. 2,000 mm Variable feed speed closed and robust chopping drum Easy to set up and maintain Variable knife advance and easy screen basket change for quality wood chips from P16 to P100 (G30 – G100) Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. ...

length in total: ca. 3500 mm band width: ca. 700 mm conveying height: ca. 1200 ejection height approx.: 1200 mm dimensions of the machine ca.: ca. 3500 x 1300 x 1650 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a used ZENO shredder ZTLL 740x900 with the following features: Manufacturer: ZENO Model: ZTLL 740x900 Condition: good Dimensions set-up: 1.70 x 1.80 x 2.60 m last operation: August 2023 Previous use: EPS shredding Electrical data: Control cabinet is wired to the machine Motor power: 15kW Hydraulic ag: 0.25 kW Other: Spare perforated grille 11x17 available, separate stairs to the hopper available; Availability: immediately or by appointment

Offer 24083 Specifications: - Capacity 300 L - Load capacity up to 750 kg - Drive-in pockets for forklifts -Tilt - Drain tap for draining liquids - Mobile base frame with 2 swivel castors - Space requirement W 1500 x D 750 x H 1250 mm - Weight approx. 220 kg

Chip extraction, industrial vacuum cleaner NILFISK GB 635 50 STB -U- with stainless steel tank for chip extraction 380 V without hoses used, tested ! Dimensions: 1100 x 700 x 1000 mm

Chip Conveyor, Hinge Plate Conveyor - Chip Conveyor, Hinge Belt Conveyor SILISTRA TC 280 x 900 ( TC280x900 ) Inlet Hopper Height: 230 mm Inlet: 230 mmbr /br /Inlet: 230 mm 80 x 900 mm belt width: 400 mm height ejection: 1000 mm 220 / 380 V used, tested ! Dimensions: 2700 x 750 x 1350 mm

AME Scraper Belt Conveyor KB530 Year of manufacture: 04/2016 Condition: NEW Overall length: 2.50 m Hinge belt width: 0.45 m Lifting height: 1.10m Total width: 1.50m Max. capacity: 140 l Weight: 494 kg

Mayfran Hinged Belt Chip Conveyor with Enlarged Coolant Tank Condition: NEW Overall length: 4.00 m Hinge belt width: 0.50 m Lifting height: 1.10m Total width: 1.20m Coolant tank L: / W: / H: 3.20 x 1.20 x 0.25 m Hand shower Machine pump Pump with piping

Manufacturer: Silo, Year: 2006, Capacity m³: ca. 250, Length mm x width mm x height mm: 7800x6582, Year :2006

Year of construction 2006 Chip conveyor belt Mobile substructure Delivery date: immediately Ref: BU250081A Price on request. We supply and install worldwide.

Cultivator with Kubota 4 cylinder diesel engine V 2203 36.9 kw/49.5 hp / 2,800 r7min. , hydraulic 2-roller feeder with adjustable feed speed (cutting length of 5-20 mm) and automatic overload protection (ABS/electronic), for timber up to 180 mm (max. clearance width x height 240x205 mm), single-axle chassis BPW 80 km/h with height-adjustable towing device, overrun brakes with ball coupling, automatic support wheel, permissible overload brake. GG 1,500 kg. Brand "Made in Germany" (Jensen - since 1884) Other wood chippers in stock - also PTO machines for three-point hitches. ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...

Drum crusher with hydraulic pusher Knife drum width: 800 mm Mouth 800 x 1200 mm Motor: 18,5 kW extraction connection diameter 200 mm

Motor: 5.5 kW Speed: 2980 rpm Input diameter: 25 cm Output dimensions: 30 x 20 cm With mounting bracket With control box

Tipping containers, tipping containers for forklift trucksChip buckets - dump buckets - folding containersLoad capacity: approx. 1000 kgVolume: 1 m³Entry bracket: 230 x 110 mmTine spacing inside: 160 mmTine spacing outside: max. 600 mm- Entry pockets for forks - Entry bracket for transport and emptying by forklift or pedestrian stacker- Manual tilting device via hand lever- 4 pieces of plastic fixed castors 175 and, 2 pieces of steerable- foldable trailing drawbarWeight: 220 kgLength: 1700 mmWidth: 1060 mmHeight: 1500 mmvery

Torx JD-79 chipboard screws 6x120 Auction-ID: A1-40900-504

Chip conveyor, scraper conveyor with coolant tank BMF type KF 200 K17Ident. No: 0495078 Order No: 915979 year of construction 1992Metal link width 200 mmDistance driver bars approx. 380 mmLength of possible chip removal 1100/2100 mmInsertion length approx. 1350 mmInsertion height 370 mmInsertion width 460 mmHopper width at the top 400 mmHopper width at the bottom 170 mmConveying height - discharge height approx. 1250 mmMotor power belt drive 0.37 kWNetz connection 400 volts, 50 Hz- Drive of the scraper chain via geared motor-

650x1200x700m Auction-ID: A1-51094-38

Extruder for the production of packaging chips built in 1994

As good as new chip conveyor from Bürener Suitable for Emco HT 45 lathe

Collecting pan, floor pan, collecting container, floor element, steel flat pan, coolant liquid collecting pan, collecting pan grinding machine milling machine -Collection pan: for chips with coolant liquid, 1045 x 745 mm -Bath height: 150 mm -Cut-out: 240 x 175 mm -Total dimensions: 1045/745/H150 mm -Weight: 12.1 kg