wood chip used for sale

Extruder for the production of packaging chips Year of manufacture: 1994 Screw: four-course Cylinder: 2-pass Nozzle plate "FLIPS/balls diameter 4mm/1-fold Cutting device with 4-blade cutter head Dosing and suction device Machine is electrically connected, dry running possible Spare parts: 2 4-pass screws, 1 nozzle plate

Production Year 2015, start use in end of 2015. Used for two Year. Was used with 75kW electric motor. Now it is without motor. Can be used with some diesel motor. Have spare knives. Can input up to 42cm diameter log

Complete chipping plant EWD, capacity 30-40 m3 of logs per hour. The plant was dismantled in Germany. Located in Moscow. Technical data and price on request.

Chip shredder for material from the gunmetal or brass sector. Manufacturer: Erdwich Zerkleinerungsmaschine GmbH Condition: Little used; good to very good. - Range of application: Shredding of gunmetal or brass chips - Throughput capacity: 150 kg/h - Process sequence: The containers with the chips are fed into the hopper of the shredding machine by means of a forklift truck. The dumping height is approx. 2,950 mm. The shavings are crushed by the crushing plant and discharged into the on-site container. Occasional impurities are discharged via the impurity flap and and discharged into a separate container. Operating Instructions: 1 x in paper form; 1 x as CD-ROM in German or English. Temperatures: The system/machine as well as its switchgear combination (control) are designed for operation from 0 to 35 degrees room temperature at 60 % humidity. Deviating operating conditions r ...

Technical Data - Year of Manufacture: 08/2019 - Dimensions (LxWxH): 35x4x5 m - Total Weight: Drying approx. 7 tons, Washing approx. 9 tons - Throughput: approx. 700 kg/h aluminum shavings, approx. 1400 kg/h alloy shavings - Energy Source (Drying): Gas - Energy Source (Washing): Gas - Gas Consumption: approx. 44 m³/h - Electricity Consumption: approx. 37 kWh/h - Dimensions (LxWxH): 35x4x5 m - Electrical Data: - Nominal Voltage: 400 V - Network Frequency: 50 Hz - Control Voltage: 24 V Find more here - / Contact us at -

In excellent condition, shaft drive.

Dimensions (L/W/H): 1750x1100x1640 mm Weight: 1000 kg Total power requirement: 15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1737x1167x1650 mm Weight: 1300 kg Total power requirement: 18,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2455x2168x1730 mm Weight: 3200 kg Total power requirement: 37 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2455x1970x1730 mm Weight: 2600 kg Total power requirement: 30 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2285x1420x1730 mm Weight: 1600 kg Total power requirement: 22 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2285x1420x1730 mm Weight: 1600 kg Total power requirement: 22 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2765x2520x1730 mm Weight: 3600 kg Total power requirement: 55 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Catalog No. 6825 TECHNICAL DATA - dimension of the loading hopper length/width 900x630mm - working width of the rotor 540mm - 7.5 kW motor - sieve diameter 20mm - knife size 40x40mm - number of knives 15 pcs - autoreverse - pressure drawer - dimensions length/width/height 2060x980x1580mm - weight 1008 kg ADVANTAGES – German production – unpainted - very good condition – used chipper Net price: PLN 37900 Net price: 8151 EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies -Manufacturer: Walther Trowal, ceramic grinding wheel type C 15 x 30 ZS Ultra-Chips -Grain: see photos -Price/tax: complete -Transport dimensions: 900/200/H500 mm -Total weight: 76 kg

The BBT 400 Woodzilla is a 360° swivel, compact, Powerful, mobile drum chipper with aggressive feed, built on truck trailer chassis. Technical data Drive: Diesel, Deutz TCD 3.6, 100 KW (136 HP), Stage 5 Feed: 320 x 500 mm Chopping drum: 400 x 500 mm, 4 knives Trunk diameter max.: 32 cm Length of feed table: 1300 mm Outrigger: 4-fold hydraulic Z-Crane Ben-Tele 550 2 additional feed rollers Radio remote control for chippers and cranes Pendant towing eye: 40 mm Brake: Air pressure brake, Duomatic 2 additional feed rollers Radio remote control for chippers and cranes The machine is in mint condition. Location: NRW Availability: by arrangement Warranty: The machine is stored in the condition existing at the time of handover. sold. The seller assumes no liability for defects We reserve the right to sell in advance, make changes and repairs.

20-75- CNC with tool changer WOODLAND MACHINERY (new) Type SX1325A-12 Useful working area axis X-Y-Z 2850-2100-150 mm Shaft, air cooled, 9.0kw 24000 rpm. Servo motor Control system LNC Drive gear High precision automatic positioning cylinder Work table vacuum plate Vacuum pump 7.5 kw Maximum speed 60 m/min Maximum working speed 15-20m/min Flexible towing cable (with screen) Air components BLCH Voltage 380V/50HZ Transport dimensions 3200x2100x1800mm Weight 3100 kg The price is 24500 Eur

2x Wood drying chamber dry chamber energy saving system 606 economy It is run until 2018. The heating system can be purchased in addition - wood chips with 400 KW heating capacity and boiler , etc. - Same year of construction. The solar system/panels on top can also be purchased. Find more here - / Contact us at -

Manufacturer: Soest Type of Machine : Universal Surface Finishing Line – Parquet / Wood Surfaces Year of Manufacture: 2019 Condition: Very good, lightly used Complete Soest universal surface finishing line for oiling, staining, lye treatment, and patination of wood surfaces, especially parquet. Robust industrial design with Siemens frequency-controlled motors and continuously adjustable speeds in forward and reverse. Includes roller coating machine, brushing/spreading machine, and extensive accessories. Components Included: - Roller Coating Machine RCR-400-L Reverse - Brushing/Spreading Machine VP-400-1B-2P-2B - 2 replacement application rollers - Material pump (new, unused) - 4 replacement brushes - Various spreading pads - Pneumatic brush cleaning machine Technical Details: - Maximum workpiece width: approx. 410 mm - Motor control: Frequency-controlled (Siemens) - Speed contr ...

Manufacturer: Trockenkammer Lauber /Mühlböck Wood Drying System Year of Manufacture: 2012 Type of Machine : Wood Drying System TECHNICAL DATA PER UNIT HOT WATER HEATING - Heating capacity: 283,800 kcal/h = 330 kW - Flow temperature: 95 °C - Water volume: 11 m³/h - Pressure loss: 3 mWS = 0.3 bar - Connections (supply/return): DN 50 / DN 50, PN10 SPRAY SYSTEM - Water consumption: 68 l/h - Temperature: T = +4 °C - Pressure: p = 3.0 bar - Connection: R 1/2" - Spray nozzles: 5 pcs FANS - Quantity: 10 pcs - Power per fan: 1.1 kW - Voltage: 400 V STACKING DIMENSIONS - Length (L): 2 × 6.0 m + 1.00 m - Width (W): 2 × 1.2 m + 1 × 0.2 m - Height (H): 3 × 1.2 m + 3 × 0.1 m GROSS STACKING VOLUME - 103.7 m³ TECHNICAL DATA PER CHAMBER HOT WATER HEATING - Heating capacity: 410 kW - Flow temperature: 95.0 °C - Water flow rate: 24 m³/h - Pressure loss: 3.0 mWS = 0.3 bar - Flow ...

This WoodVER UPK-1 was manufactured in 2022. It features a maximum log diameter of 1000 mm and lengths from 2.0 to 6.5 m. The saw has a 550 mm diameter and operates at speeds up to 3000 rpm, powered by dual 18.5 kW motors. It includes an automatic feed, CNC remote control, and hydraulic log handling, enhancing productivity and precision. Contact us for more information about this machine.

This LINYI JIANZHONG WOOD MACHINERY JJC-CP was manufactured in 2019. It features a maximum pressure of 500 tons, adjustable for various applications, and can handle filling sizes up to 1300 x 2500 mm. With a capacity of 6 batches per hour and a total weight of 12000 kg, this carcase press is CE marked, ensuring compliance with safety standards. Contact us for more information about this machine.

Woodzilla BBT 400 Drum Chipper Year of manufacture: 2023 Engine: Deutz 75 hp diesel Max. trunk diameter: 32 cm Height of inlet opening: 320 x 500 mm 360° machine slewing ring Length of feed table: 1300 mm Crane type: Z-Kraan BenTele -Crane reach: 5500 mm -Telescopic: 1100 mm Radio remote control Chassis: Tandem axle Speed up to 80 km/h Weight: 3500 kg

New. Designed for bed slats stress tests. Power consumption: 230 V The clamping force adjustable from 2 to 10 bar (till 200 kg). Inspection speeds of ~ 40 pcs. / Min. The adjustable length of the product. Simple service. Lamelle test labeled. Marking the label may change. Manufacturer Ltd. MS Import, Lithuania.

The New. ų l ū the tables for tests. Electric ą 's benefit: 230 V. Pressure (j) ė ga adjustable from 2 up to 10 bar. The speed ~ 44 PCs./min the event is governed by the product of the Į ilg į. A simple room. ė table at the time of the test (s) shall be identified. ym ė-ą character can be changed. The Manufacturer JSC MS Import, Lithuania. Video į ra as: abc://abc.youtube.com/watch?v=AqElqGkB7_c&feature=youtu.be

HAVE A GOOD DAY SIR. WE VE 1 PCS NEW UNUSED 1 PCS REBUILT WOODWARD UG ACTUATORS AT OUR STOCK . PLS FIND PART NUMBER AT BELOW PART NO. A8251-568 GG A8251-000 6 - WE VE 8 PCS USED WOODWARD UG ACTUATORS. PLS FIND SERIAL NUMBER AND DTLS AT BELOW.. PART NO. A8251-568 GG A8251-568 A8251-568 CW A8251-568 GH A8251-568 GG A8251-568 GG A8251 006 6 A8251 560 MH IF YOU INTEREST WE WILL OFFER YOU. ALL PARTS IN IZMIR TURKEY IF YOU'VE ANY QUESTIONS PKS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Type : T900 Spindle-30 mm spindle rotation speeds- 2500 / 5000 /8000U /Min/rpm Spindle tilt- 5° to +45° spindle trave-140 mm max. clamping height-125 mm max. tool diameter-230 mm Table dimensions-1020x700 mm table height-900 mm dust collector plug-60/120 mm engine power-3 kW 400V weight net/gross-280 kg packaging dimensions-1150x1155x730mm

Dimension of sliding table- 1600x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 650 kg Transport dimensions - 1800x1000x1200mm Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Best price 4150 Eur (EXW Jonava, Lithuania) Buying this machine, dust exhausting system HOLZMANN ABS 3880 only 320 Eur (EXW Jonava, Lithuania) or HOLZMANN ABS 2480 only 250 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2800x375mm Gross cut capacity- 2800mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 125mm Height of cut (45°) - 115mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Main motor - 5,5 Kw Saws lifting, up and down, electrical control. Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 2800x1000x1100mm Weight - 800 Kg

Best price 4600 Eur (EXW Jonava, Lithuania) Buying this machine, dust exhausting system HOLZMANN ABS 3880 only 320 Eur (EXW Jonava, Lithuania) or HOLZMANN ABS 2480 only 250 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 3800x375mm Gross cut capacity- 3800mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Main motor - 5,5 Kw Saws lifting, up and down, electrical control. Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3800x1000x1100mm Weight - 820 Kg

Best price 4500 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 3200x375mm Gross cut capacity- 3200mm Width of cut between saw blade and rip fence - 1250mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115 mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 Kw Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3200x1000x1100mm Weight - 850 Kg

Type R-RP630 Working width 630 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller 190 mm Diameter of second 190 mm Abrasive belt size 650x1920 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1200x2100mm Weight 1200kg

Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Type R-RP1300 Working width 1300 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 30,37 kW Motor for first unit 15 kW Motor for second unit 11 kW Feeding motor 4 kW Lifting motor 0,37 kW Diameter of first roller 240 mm Diameter of second 210 mm Abrasive belt size 1330x2200 mm Working air pressure 0,6mpa Volume of dust collection device 9600 m3/h Transport dimensions 2700x2100x2100mm Weight 3300kg

Type SX1325AP-2128 Axis: Useful working area axis X-Y-Z 2070-2800-100 mm Pieces clearance in Z 100 mm Max. traveling speed 70 m/min Max. working speed 30 m/min Working table: Phenolic multifunction Nr. of stops standard 10 (4X-6Y) Vacuum pump 45,5 kW(50/60 Hz), air cooled Electrospindle: Standard power (S6) 9,5 kW, ISO30 Max. speed 24 000 rpm Tool changer: ATC carousel for 12 positions Lubrication: Automatic centralized lubrication Installation: Installed power 22-33 kW Compressed air cosumption 450 NL/min Extraction air consumption 3000 m3/h Extraction air speed 25 m/sec Suction hood diameter 2x150 mm Weight 3500 kg Video abcs://youtu.be/2q3wHCalvSg

Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video: abcs://youtu.be/NwSQ6DHySrU

Type SE-360D Thickness of panel 10-60 mm Edging thickness 0,3-3 mm Feeding speed 13-22 m/min Air pressure 0,6 MPa Voltage 380V/50Hz Total install power 10,5 kW Min. panel dimensions 150(L)x150(W) mm Made in 2017 y. Transport dimensions 4420x900x1560 mm Weight 1400 kg

Total height 1500 mm Total length 3000 mm 5 pneumatic cylinders Compressed air pressure 8 bar Travel of pneumatic cylinders 100 mm Diameter of pneumatic cylinders 100 mm

Type SK-1000-P4 Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Polishing roller speed - Frequency control Feeding speed 5-20m/min Total motor power 8.14kW Disc motor 1.5kW1 Disc swing motor 0.37kW 1 Screw roller motor 2.2kW 2 Feeding power 1.5kW Working table up and down 0.37kW Transport dimensions 2700x1700x1600mm Weight 2300kg

Type SK-1000-P6 Working width 1000 mm Min.working length 500 mm Working thickness 2-150mm Polishing roller speed - Frequency control Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW1 Cross motor 1.5 kW 1 Screw roller motor 2.2 kW 2 Feeding power 2.2 kW Up and down motor 0.37kW4 Swing motor 0.37kW 2 Working table up and down 0.55 kW Transport dimensions 3650x1850x2100mm Weight 4200 kg

Type R-RP1000 Working width 1000 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller (steel) 190 mm Diameter of second (ruber) 190 mm Abrasive belt size 1020x2000 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1600x2100mm Weight 2200kg

JJZ-CP type press designed for the production of plywood, doors, MDF. The glued elements are fed and removed from the press automatically by means of driven rollers. The press can be used with glue feeders. Specifications: -max. pressure 500T/ adjustable/ -max. load height 1300mm -max. batch size 1300x2500 -press size 3600x1370x4500 mm -press foundation ~500 mm below the floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max. power 13.2 kW -Ce -capacity of 6 batches per hour Currently, we glue panel doors and MDF board on presses. Very good technical condition. We offer a plywood production line dedicated to these presses.

Type V-380 Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video abcs://youtu.be/xZFPl9-vHtg

DEAR'S SALE, NEW DRIVERS 4 PCS 2301A LOAD SHARING & SPEED CONTROL 1 PC 2301D DIGITAL LOAD SHARING & SPEED CONTROL 3 PCS SPM-A SYNCHRONIZER 1 PC 2301A SPEED CONTROL 1 PC LOAD SHARING MODULE Brgds Hakan KUSCU +905323642509 info@kscege.com

Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/К140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)

Type V-180 Number of wheels(pcs) 1 Wheels diameter 200 mm Wheels width 40 mm Feeding rate 0,9¬21,2 (A25B40) Motor power 0,75 kW Machine frame - Cast aluminum Transport dimensions 632x332x222 mm Weight 20,1 kg Video: abcs://abc.youtube.com/watch?v=dfsFa6y4sv0&feature=youtu.be

Type SK1300-P6 Working width 1300 mm Min.working length 370 mm Working thickness 5-140mm Polishing roller speed - Frequency control Feeding speed 2.5-12,5 m/min Total motor power 16.87 kW

Type DTW-120A Horizontal three axis Brush roll height 300/600/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1780x760x880 mm Weight 165 kg

Type DTW-60A Horizontal three axis Brush roll height 300/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1220x720x900 mm Weight 150 kg