127,904 used machines on RESALE, but how to find them? Machine Search
Hobs, tooth gear hobs for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 4 2233 HSS / Co TGL 29-8002 Bore Ø 32 mm New !' Dimensions: 90 x 90 x 88 mm
Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS) Type K Module 2 2109 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 62 x 62 x 48 mm
Hobs, tooth gear hob for hobbing machine WMW / PWS Type K Module 2 2503 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 62 x 62 x 48 mm
Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 2 605 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 63 x 63 x 48 mm
Hobs, sprocket hobs WMW / PWS ( WMW/PWS ) Type BP II ( BPII ) Chain pitch 9,25 rollers Ø 5 mm 9317 HSS / Co Bore Ø 27 mm New !' Dimensions: 70 x 70 x 57 mm
Hobs, tooth gear cutters for hobbing machine WMW / PWS ( WMW/PWS ) Type A Module 1.5 351 HSS / Co TGL 29-8002 Bore Ø 27 mm New ! Dimensions: 85 x 85 x 40 mm
3-jaw chuck, three-jaw chuck WMW DH475x3-III TGL 30 2332 outer Ø: 475 mm bolt circle (flange) Ø: 172 hole Ø: 190 mm bore (flange) Ø: 140 mm height with jaws: 195 mm max. 800 rpm used, tested ! Dimensions: 475 x 475 x 195 mm
3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW TGL 30-2312 Outer Ø: 200 mm Bolt circle Ø : 150 mm Flange Ø : 180 mm Height with jaws: 153 mm Jaws individually adjustable by toothing ! used, tested !' Dimensions: 200 x 200 x 250 mm
Alignment pin set WMW D 45 ( D45 ) 751 82 453 10 SK 45 Spigot: Ø 40 mm Dimensions: 177 x Ø 58 mm Set consists of 2 pieces ! New !' Dimensions(Packing): 260 x 120 x 90 mm
Tool holder, reducing sleeve for MK tools WMW C 45 x 5 x 185 ( C45x5x185 ) TGL 27260 SK 45 Tool: MK 5 Dimensions: 268 x Ø 80 mm New !' Dimensions(Packing): 290 x 120 x 110 mm
Boring tool, special accessory WMW TGL 32680 ( TGL32680 ) TGL 30-1201 shank: Ø 20 mm adapter: Ø 8, 10, 12 mm in wooden box used, tested ! Dimensions: 185 x 120 x 60 mm
Milling cutter mandrel , tool holder, with tightening thread WMW 4 x 25 x 160 ( 4x25x160 ) TGL 30-4113 MK4 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 490 x 45 x 45 mm
Cutter mandrel , tool holder, with tightening thread WMW 4 x 25 x 80 ( 4x25x80 ) TGL 30-4113 MK4 shaft diameter: Ø 16 mm Tool holder: Ø 25 mm New ! Dimensions: 300 x 45 x 45 mm
Milling cutter mandrel, tool holder, with tightening thread WMW 3 x 25 x 160 ( 3x25x160 ) TGL 30-4113 MK3 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 425 x 45 x 45 mm
FZWD 160x1600/1 Sabo Basis 160 Facing & Centering Machine WMW HECKERT Workpiece dia 20-160 mm Length 130-1600 mm Max. Diameter of Milling Cutter 200 mm Facing Spindle's Speeds 112-280 rpm Spindle's Speeds 560-1400 rpm Adjustable feed rate range 15 – 800 mm / min. Spindle ISO 50 Rapid traverse 6000 mm Max. stroke 230 mm Max. Depth of 6 mm Tool holder 4 - 20 mm Max. Feed path 60 mm Total connected load 20 kW Weight 4.5 t
x-travel: 1600 mm : ja weight of the machine ca.: 13,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993.
Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible.
Travel X/Y/Z: 850mm/280mm/355mm, table dimensions X/Y: 1250mm/315mm, feed X/Y: 800mm/min, feed Z: 250mm/min, spindle mount: ISO 50, spindle speed: 1400rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, weight: approx. 3300kg. On-site inspection is possible.
max. wheel diameter: 400 mm gear width: 275 mm gear width: 275 mm max. module: 6 weight of the machine ca.: 5,5 t shifting: 100 mm dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
frequency: 50 Hz voltage: 380 V : 220 V connected load: 2,6 kVA rated current: 6,1 A weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WMW Union BFT 80/2 X: 1000 - Y: 1000 - Z: 1600mm Spindle Dia: 80 mm Spindle bore: ISO 50 Table dimensions : 1100 x 1000 mm Table longitudinal travel (X-axis): 1000 mm Cross travel Table/colom (Y-axis): 1000 mm Height travel head (Z-axis): 1600 mm Max travel spindle: 700 mm Power on spindle: 1250 rpm Power principal motor: 8,5 kW Weight: 11 ton
max. width of grinding wheel: 50 mm ratio: 0 max. dia. of grinding wheel: 400 mm total power requirement: 3 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m Pre-Dressing Device for Gear Grinding Wheels The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mm table width: 1800 mm table load: 12,5 t total power requirement: 10 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features Telescopic covers for the guides. Infinitely variable table feed. Optical display for setting and reading the longitudinal adjustment. Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power ...
Drilling capacity in steel/cast iron: 40mm/60mm, throat depth range: 300mm-1250mm, max. workpiece height: 745mm, spindle mount: MK5, spindle stroke: 355mm, speed: 1200rpm, feed: 756mm/min, column diameter: 300mm, spindle-plate distance: 280mm-1380mm, table dimensions X/Y: 1400mm/750mm. Machine dimensions X/Y/Z: approx. 2200mm/1000mm/2800mm, weight: approx. 3000kg. On-site inspection is possible.
Drilling capacity in steel: 50mm, spindle mount: MK5, speed: 1000rpm, throat depth: 355mm, drilling stroke: 280mm, spindle-table distance: 710mm, spindle-column distance: 355mm, table dimensions X/Y: 630mm/500mm, column diameter: 160mm. Machine dimensions X/Y/Z: 1200mm/800mm/2700mm, weight: approx. 1650kg. On-site inspection is possible.
Travel X/Y/Z: 820mm/300mm/485mm, table dimensions X/Y: 250mm/1000mm, spindle mount: SK40, speed: 2800rpm, spindle head swivel: +/-45°, quill stroke: 100mm, feed: 630mm/min, connected load: 9.5kW, machine weight: approx. 1600kg. Documentation available. On-site inspection is possible.
A total of four WMW/Werkö saw grinding machines are available. Saw blade diameter min./max.: 250mm/1450mm, grinding wheel diameter: 250mm, speed: 2500rpm, tooth pitch: 42mm, grinding spindle swivel range: +/-45°, machine dimensions X/Y/Z: approx. 850mm/1000mm/1800mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible.
Sanding width: 200mm, sanding length: 600mm, adjustment path X/Y: 690mm/230mm, clamping table spindle center distance: 500mm, sanding wheel diameter: 200mm, sanding wheel width: 20mm, bore: 51mm, table dimensions X/Y: 200mm/600mm, max. table load: 110kp, machine dimensions X/Y/Z: approx. 3000mm/1600mm/2100mm, weight: approx. 1300kg. Documentation available. On-site inspection is possible.
pressure: 40 t throat: 250 mm stroke: 1280 mm total power requirement: 6,5 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
internal diameter: 20... 400 mm grinding depth: 315 mm internal grinding spindle rev.-stepless: 2640...16500 U/min work piece spindle speed: 40400 U/min table speeds: 0,18 m/min rapid traverse: 10 m/min table travel: 630 mm total power requirement: 16 kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: m grinding diameter: innen / internal 20..400 mm / external 500 mm max. diameter of work piece: 500 mm max. grinding length: 315 mm cone grinding: 60 ° power drive of internal grinding motor: 7,5 kW rev’s of internal grinding spindle: 2640...16500 U/min power drive of face grinding attachment: 4 kW power drive of workpiece motor: 1,5 kW rev’s of work piece spindle: 40...400 U/min steplessly variable table traverse speeds: 0,1...8 m / min rapid movement of table: 10 m / min stroke table 630 mm max. distance between work piece spindle flange and grinding spindle: 1250 mm ...
saw blade diameter: 250 - 1250 mm grinding wheel diameter: 250 mm total power requirement: 3,5 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 850 x 1000 x 1800 mm Circular saw blade sharpening machine for sharpening medium to coarse metal saw blades Saw blade diameter Cold circular saws : 250 - 1250 mm Hot circular saws : 900 - 1700 mm Tooth pitch up to : 42 mm Grinding wheel double height : 25, 37, 50, 75 and 100 Grinding wheel revolutions : 2000 and 2500 rpm Grinding wheel diameter : 250 mm Pre-cutting tooth can be chamfered on both sides : up to 45 degrees Cutting edge geometry for hot circular saws : = -4 degrees Weight of the machine : 1000 kg external dimensions : 850 x 1000 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate width: 2500 mm sheet thickness - max.: 32 mm sheet thickness - max.: 39 mm sheet thickness - min.: 8 mm bale length: 2700 mm number of straightening: 7 Rollers number driven straightening rollers: 5 Stk straightening roll diameter: 290 mm diameter of input / output straightening rollers: 345 mm number of support rollers: 13 Stk diameter of support rollers: 288 mm stroke of upper beam: 120 mm straightening feed: 16 m/min rated power of main drive: 90 kW : 138 kw weight: 79 t - max. sheet thickness( St 50): 32 mm - max. sheet thickness( St 34): 39 mm - min. sheet thickness( St 50): 8 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle taper: MK 3 total power requirement: 4 kW weight of the machine ca.: 0,620 t Center bore grinding machine - 160 x 1000 LO - small/ large drilling/grinding length: 50/ 1000 mm - Spindle holder: MK 3 - small/ large workpiece diameter: 6/ 160 mm - Grinding head in spindle hole: 125 mm - Oscillation size: 0 to 5 mm - Oscillation double strokes: 125 / min - Speeds: 55/ 110 rpm - Connected load: 4 kW - Weight: 620 kg specification: motor. Material rotation oscillation Switch cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
nominal power: 63 t stroke rate in continuous stroke: 90 min force: 2200 Nm Torque: 12500 Nm Labour performance: 5,5 kW sheet thickness - max.: 6,3 / 3,2 mm cutting surface: 1600 mm² distance between columns: 320 mm throat: 315 mm min. ram stroke: 8 mm max. ram stroke: 120 mm ram adjustment: 70 mm ram surface: 400 x 500 mm tool hole in ram: 40 mm tool shank hole (depth x diameter): 92 mm T-slots: 2 Stk total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 2...20 mm throat: 210 mm bore stroke: 100 mm total power requirement: 1,1 kW weight of the machine ca.: 0,165 t dimensions of the machine ca.: m - spindle taper: MK 2 - max. drilling capacity: 2 ... 20 mm - distance center drill spindle to column : 210 mm - distance from spindle to table : 400 mm - max. stroke of spindle: 100 mm - adjustment of spindle stock 250 mm - table size: 340 x 280 mm - 4 speeds of drilling spindle: 355 ...2800 per minute - rated power: 1,1 kW - weight: 165 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): / mm throat: / mm bore stroke: / mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
arm length: 300... 1600 mm bore radius max./min: 1800 mm bore capacity in steel (diameter): 56 mm threading: max. 65 mm bore depth: 400 mm tool taper: MK 5 base plate: 1700 x 1000 mm turning speed range - drilling: 14...1800 U/min feed: 0,0315...1,6 m/min total power requirement: 4,5 kW weight of the machine ca.: 7,13 t dimensions of the machine ca.: m - distance Spindle head to base: max. 1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 850 mm y-travel: 270 mm z-travel: 355 mm tool taper: ISO 50 speeds of spindle (left/right): 25-1400 total power requirement: 3,8 kW weight of the machine ca.: 2 t dimensions of the machine ca.: m - feeds all axis 10 - 630 mm/min / 250 mm/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mm throat: 355 mm bore stroke: 280 mm spindle taper: MK 5 spindle head adjustment: vertikal 280 mm motorisch feed: 0,11-1,73/9step mm/min turning speeds: 32-1400/12step U/min table-size: 770 x 640 mm surface area: 630 x 500 mm base plate: 490 x 530 mm total power requirement: 8,1 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 1,25 x 0,8 x 2,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1190 mm y-travel: 530 mm z-travel: 540 mm table-size: 1600 x 400 mm spindle drive: 11 kW tool taper: ISO 50 turning speeds: 28-1400 U/min feeds: 16-800 mm/U total power requirement: 21 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WMW HECKERT FU450R-51 universal milling machine was built in 2009 in Belarus by Gomel Machine Tool Plant S.M. Kirov.. This extremely versatile, functional and reliable machine is designed for precision machining of workpieces with a maximum weight of 1500 kg. The machining process is performed by a powerful spindle on a large work table. T-slots in the table allow for quick installation of additional tooling such as a vice. The precision and repeatability of the manufactured parts, in turn, is maximised by the design made of the highest quality cast iron, which maintains excellent stability during even the most intensive challenges. All this makes the offered FU450R conventional milling machine an excellent choice for both unit and series production. The WMW HECKERT vertical milling machine weighs 4300 kg. Technical specifications of the WMW HECKERT FU450R-51 milling machine - number ...
Feed rate: 250mm/min, speed: 2800rpm, tool diameter: 200mm, weight: approx. 850kg. An on-site inspection is possible.
WMW Niles Ø 1400 x 2000 mm Distance between centers: 2000 mm Swing over bed: 1400 mm Swing over cross-slide: 1100 mm Swing in gap: 1800 mm Diametre of main spindle bore: 90 mm Power on main spindle: 14 kW Number of speeds: 382 rpm Chuck (3/4 pinch) -- diametre: 1200 mm
Key data: 50 mm, 335 mm, 280 mm
Power: 7.8 kW Weight: 1,650 kg Table size: 630 x 500 Speed: 45 - 1,000 rpm Machine is ready for operation and can be dispensed immediately.
maximum number of results exceeded
please refine your search
