WMW HECKERT used machine for sale

Key data: 1120 mm, 345 mm, 400 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 1/min Travel X/Y/Z 1120/345/400 mm Feed range X/Y 16 - 800 mm/min, Z 5 - 250 mm/min Rapid traverse Milling head swivel range +/- 45°, quill stroke 90 mm Connected load approx. 14 kW Incl. 3-axis position indicator POSITIP 850, coolant device Electric tensioner, bracket cover Functionally tested as well as in 2015 control cabinet renewal FSS 400/E Control cabinet approx. W800xH1200xD300 mm with CPU Siemens S7-300

Key data: 4000 mm, 1700 mm, 1600 mm

Guideway and surface grinding machine WMW HECKERT Aschersleben Type SZ 16 - 16 - 04/22.1 - 7.1 Slideway Grinding Machine Built in 1987 Nominal grinding area 4000 x 1700 mm Table clamping surface 4240 x 1600 mm Grinding length max. 4000 mm Machining width 1700 mm Machining height 1600 mm With accessories Weight 50 ton. very good condition

Key data: 20 mm

I am selling a well used, fully functional, bench drill from WMW model BT 2. Technical data for the machine are : Recording: MK2 Drilling stroke: approx. 100mm Max table spindle spacing: approx. 440mm Weight: 165kg. Table surface: 340mm x 280mm LxWxH: approx. 600mm x 500mm x 1300mm Incl. lighting and instruction manual. The oil has been changed. Incl. new drill chuck. The table is in good condition. Nothing is drilled. The machine can be viewed and tested under power by prior appointment. If you have any questions, just get in touch. Shipping, on pallet, is not a problem. Please inquire about shipping costs with postal code. On-site loading is possible without any problems. The sale is without guarantee and warranty. Returns are excluded. All information is subject to change.

Key data: 850 mm, 270 mm, 355 mm

Table width 315 mm, table length 1250 mm Tool holder SK 50 Speed range 28 - 1400 rpm Feed range 16 - 800 mm/min Travel x=850 mm, y= 270 mm, z=355 mm Connected load 8 kW Incl. Electric clamp horizontal Vertical head in X swivel with manual tightening Dispensing as present, no longer energized

Transverse slide milling machine with digital display , used milling m/c with vertical head and DRO, used Hersteller/make: HECKERT Typ / model: FQW 400 Baujahr/ year: 1983 Tischgrösse/ table: 400 x 1600 mm Tool holder/ taper: ISO 50 max. table load: 1500 kg Verfahrweg längs / move longit.: 200 ... 1400 mm Verfahrweg quer/ move cross: 55 ... 505 mm Verfahrweg perject / move vertic.: 100 ... 525 mm Spindle speeds: 45 ... 2240 rpm in 18 steps Drive power of the milling spindle | load of spindle: 15 kW Connected load: 21 kW Masse/ weight: 4000 kg

Machine type: Column drilling machine Make: WMW Heckert Type: BS 32 AI Control type: conventional Drilling capacity in steel (diameter): 32 mm Projection: 320 mm Drilling stroke: 200 mm Spindle mount MK: 4 Feed: 0.08.1.25 /9 step Speeds: 63 - 1,000 / 9 step rpm Headstock adjustment: 280 manual mm Table clamping surface: 530 x 450 mm Table adjustable: in height 350 mm Footprint: 490 x 440 mm Weight: 1.03 t

Code 101237 Description Universal Cylindrical Grinder Make WMW Heckert Model SA 5 U x 630 Serial No. 3115 Year 1981 Grinding length, max. 630 mm Grinding diameter, max. 275 mm Centerheight 140 mm Max. Weight workpiece 125 kg Table tilting angle - 5° till + 11,5° Diam. Grinding wheel 500 mm Width Grinding wheel, max. 100 mm Motorpower grindingwheel 5,5 kW Speeds workpieceholder 31,5 – 710 rpm Total power 12,5 kVA 380 Volts Machine size L x W x H 3,9 x 2,3 x 1,6 meter Weight 4800 kg Accessories coolant with magnetic some tooling Condition Machine is in good condition

Vertical -consol milling machine, used    Vertical -milling machine, used Make/make: WMW HECKERT Type/ model: FQS 400 Year built: 1978 Control type / control: conventional   x-way: 1190 mm   y-way: 530 mm z-way: 540 mm Table size/ table: 1600 x 400 mm Spindle power/ spindle power: 11kW Tool holder/tool taper: ISO 50 Speeds/ speeds: 28 - 1400 rpm Feeds: 16- 800 mm/min Total power requirement: 21 kW Machine weight: 4.8 t  

Rotational speed: 70-580/min, connected load: 5kW, weight: 3t.

Description: Specifications Character: WMW Heckert Type: FSS 400 VI/2 Panel length: 2,000 mm Table widths: 400 mm X: 1,350 mm Y: 400 mm Z: 450 mm Approx. Onsite Dimension. (l x w x h): 2,100 x 2,100 x 2,500 mm, weight approx.: 3,900 kg

Description: serial no: 1414.06.59 control: ESSA table dimensions: 1000 x 630 mm max. table load: 500 kg total power: 9 kW rated current of the machine: 18A rated voltage: 380V control voltage: 110V weight approx.: 5,900 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 2,600 x 2,800 mm

Description: Fabrication number: 10210 Operating voltage: 380 V Control voltage: 220 V Connection: 3.0 kW Rated current: 7 A Table dimensions: 450 x 360 mm With 3 grooves Attention: without the machine vice shown in the photos Spindle speed: 180 - 2000 rpm weight approx.: 700 kg, Approx. Onsite Dimension. (l x w x h): 850 x 600 x 2,100 mm

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 12 min. module: 0,5 total power requirement: 8 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 12 min. module: 0,5 total power requirement: 8 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece diameter: 250 mm threading length: 800 mm max. module: 8 min. module: 1 total power requirement: 10 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 3,05x1,75x1,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece diameter: 500 mm threading length: 1250 mm max. module: 12 min. module: 0,5 total power requirement: 8 kW weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling head, milling adapter, milling extension, angle milling head -Spare part of a: WMW HECKERT milling machine -Number: 1 piece angle milling head -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Rezes recording: mm -Pitch circle: mm -Transport dimensions: 750/600/H530 mm -Weight: 296 kg

Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: WMW Heckert, bench drill type BT 12/1 with base -Clamping table: 340 x 280 mm -Travel: 370 mm -Spindle mount: MK2 -Projection: 215 mm -Speeds: 224/450/900/1800 rpm -Column: diameter 92 mm -Spindle stroke: 100 mm -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380V -Dimensions: 620/480/H1710 mm -Total weight: approx. 182 kg

Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, centering grinding machine, center grinding machine, hydraulic universal cylindrical grinding machine, polishing machine -Manufacturer: WMW Heckert, hydraulic universal cylindrical grinding machine -Spindle motor: VEB 0.8 / 1 kW / 1410/2840 rpm -Hydraulic drive: ADDA 0.75 kW -Individual components: see photos -Distance between centers: 420 mm -Measurements: see photos -Under cabinet: with extensive accessories incl. -Brush: diameter 230 mm -Dimensions: 1720/920 / H1230 mm -Weight: 790 kg

Quick clamping device, hydraulic clamping device, electro-hydraulic clamping device, -Manufacturer: WMW HECKERT, clamping device from milling machine FSS 315-V -Type: FHKN 3311 -Motor: VEM 0.12 kW -Dimensions: 440/150 / H220 mm -Weight: 24 kg

Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: WMW HECKERT, milling head from milling machine FSS 315-V -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Stroke: 72 mm -Rezes recording: mm -Pitch circle: mm -Transport dimensions: 850/650 / H520 mm -Weight: 277 kg

Bench drill, bench drill, column drill, pillar drill -Manufacturer: WMW Heckert, bench drill type BT 2 with underframe -Clamping table: 340 x 280 mm -Travel: 250 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm -Column: diameter 92 mm -Spindle stroke: 100 mm -Motor: VEB 0.8 / 1.0 kW with brake -Voltage: 380V -Dimensions: 570/500 / H2020 mm -Weight: 192 kg

Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: WMW Heckert, rotary table type D 315 k TGL 28561/02 -Clamping surface: O 315 mm -Height: 140 mm -Groove: 14 mm -Dimensions: 615/540 / H150 mm -Weight: 83 kg

Bohrleistung in Stahl (-Ø: 45 mm throat: 1250 mm workpiece height max.: 1100 mm swival range +/-: 360 ° height adjustment: 745 mm base plate surface area: 1450 x 920 mm Bohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mm max. torque on the spindle: 250 Nm feed power: 14000 N turning speed range: 20 - 1200 U/min feed range: 0,063 - 0,63 mm/U power capacity: 3,7 kW weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.