wm used for sale

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1.5 1646 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 70 x 70 x 58 mm

table length: 2900 mm table width: 1400 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,9 t dimensions: 2,9 x 1,4 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess inlet: Ø 210 mm -Through hole: Ø 80 mm -Weight: 18 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate comes from: a WMW drilling machine -Travel: approx. 1200 mm -Clamping plate width: 1405 x 1250 mm -Dimensions: 2900/1350/H940 mm -Weight: approx. 1200 kg

Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, -Cover comes: from a WMW boring mill -for guide inside dimensions: 100 x 725 mm -Extractable: mm -Dimensions: 950/820/H150 mm -Weight: 30 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 200 mm -hard: interchangeable jaws -Base plate for: machine table -Passage: Ø 54 mm -Weight: 22 kg

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1.5 1042 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 70 x 70 x 58 mm

sheet width: 610 mm plate thickness: 1,0 mm distance between columns: 620 mm diameter of upper rolls: 38 mm total power requirement: Handbetrieben weight of the machine ca.: 40 Kg dimensions of the machine ca.: 950 x 270 x 360 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -one set: hard interchangeable jaws -Passage: 81 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Weight: 19 kg

Three-jaw chuck, 3-jaw chuck -Type: DHB 200x3x5 TGL 30 2332 -Mouth size: Ø 200 mm -Passage: Ø 54 mm -max.: 3000 rpm -Short taper mount: Ø 105 mm -Weight: 24 kg

Tool holder, milling tool holder -Number: 9x SK30 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -with transport box -Price/Sale: complete -Weight: 10 kg

Hobs, tooth gear hobs for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1.5 0062 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 70 x 70 x 58 mm

bore capacity in steel (diameter): 20 mm throat: 180 mm bore stroke: 82 mm turning speeds: 220 - 2840 U/min : 290 x 290 mm total power requirement: 0,55/0,75 kW / Volt weight of the machine ca.: 54 Kg dimensions: 820 x 500 x 290 mm CE-tested spindle hood. Keyless chuck (1 to 16 mm) Tilting work table. Depth stop. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH250x3-III -TGL 30-2332 -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 140 mm -Bolt circle: Ø 172 mm -Through hole: Ø 80 mm -Weight: 28 kg

Bezel, stick, lynette -Transfer in current condition as seen -Max. Passage: Ø 260 mm -Tip height: 370 mm -without: quills -Technical drawing: in the photos -Dimensions: 680/135/H830 mm -Weight: 92 kg

Bezel, stick, lynette -Max. Passage: Ø 212 mm -Tip height: 319 mm -Edition: gray cast iron -Technical drawing: in the photos -Dimensions: 610/120/H650 mm -Weight: 59 kg

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -Inside mount: Ø 36 x 90 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 5.4 kg

Hob, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0233 HSS / Co TGL 29-8002 Bore Ø 32 mm New !' Dimensions: 79 x 79 x 71 mm

range L-W-H: 1250 x 535 x 845 mm weight: 74 kg : 1 St. Mobile tool trolley, scope of delivery: Workbench with wooden worktop 2 x 125 mm. Heavy duty castors with brakes. 2 x 125 mm. Heavy fixed roles. 1 x robust handle made of solid steel. 1 x central locking for all drawers. 1 x 2 buttons. Very nice solid wood panel. Solid ball bearing guides. (Double bearing) The drawer can be opened 100% Dimensions of the drawer 108 x 410 x 14 cm. Load capacity of the drawer 30Kg. Dimensions of the doors 520 x 460mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -1x recording inside: Ø 28 mm -1x recording outside: Ø 40 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 4.5 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: WMW -Type: size 25 -Weight: 3 kg

Thread cutting chuck, thread chuck, tap chuck -Handover in its current condition as inspected -Thread cutting chuck without collets -with slip clutch -Cutting capacity: M24-M64 -Recording: MK5 -Quantity: 1x threading chuck available -Weight: 13 kg

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1.5 0093 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 70 x 70 x 58 mm

: 8 St. range L-W-H: 710 x 510 x 900 mm weight: 60 kg Drawer cabinet with 7 drawers Drawer dimensions 600 x 435mm Drawer height: Load 1 - 7, 81mm Load 8, 173mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shell end mills, shell mills, milling cutters -Number: 8 pieces finishing cutter/roughing cutter -Socket: Ø 40 mm -Various diameters: 120-125 mm -Different producers -Price: complete -Weight: 22 kg

Hobs, tooth gear hobs for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0144 HSS / Co TGL 29-8002 Bore Ø 32 mm New !' Dimensions: 80 x 80 x 71 mm

: max. 16 mm square edge steel: 16 mm round bar steel: 16 mm weight: 45 Kg : 180 ° dimensions: 0,4 x 0,4 x 1,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shell end mills, shell mills, milling cutters -Number: 18 pieces finishing cutter/roughing cutter -Socket: Ø 40 mm -Various diameters: 100-125 mm -Different producers -Price: complete -Weight: 57.6 kg

Shell end mills, shell mills, milling cutters -Number: 9 pieces finishing cutter/roughing cutter -Socket: Ø 32 mm -Various diameters: 76-100 mm -Different producers -Price: complete -Weight: 13.3 kg

Hob, tooth gear hob for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0630 HSS / Co TGL 29-8002 Bore Ø 32 mm New !' Dimensions: 78 x 78 x 71 mm

internal dimension: 550 x 730 x 400 mm 0: 185 l operating pressure: 5-8 bar weight: 50 kg dimensions: 0,7 x 0,6 x 1,35 m Specification: Large lockable flap. Comfortable gloves. Multifunctional cleaning sprayer. LED lighting. Air blower. Readable pressure gauge. Adjustable air pressure regulator. Removable cleaning grid. Removable filter for dirt. Removable water collection tray. Internal dimensions (LxWxH) 550 x 730 x 400 mm Interior volume 185 l Operating pressure 5-8 bar Weight 50kg Dimensions L x W x H 0.7 x 0.6 x 1.35 m Since this parts cleaner has a thermostat that sets the degreaser to 50 Degrees Celsius can heat up, it is advisable to use this degreasing cabin To be used in combination with the Eurol cold degreaser HF Plus. This degreaser has a higher flash point than the usual cold degreasers. The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

Shell end mills, shell mills, milling cutters -Number: 12 pieces finishing cutter/roughing cutter -Socket: Ø 32 mm -Various diameters: 75-110 mm -Different producers -Price: complete -Weight: 21.3 kg

Shell end mills, shell mills, milling cutters -Number: 28 pieces finishing cutter/roughing cutter -Socket: Ø 22 mm -Various diameters: 49-80 mm -Different producers -Price: complete -Weight: 10.5 kg

Machine vice, vice, drill press vice -Jaw width: 155 mm -Back height: 80 mm Clamping depth: max. 200 mm -Dimensions: mm -Weight: 35 kg

Hobs, tooth gear hobs for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 2 0140 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 63 x 63 x 48 mm

range L-W-H: 1980x510x1860 mm weight: 195 kg : 15 St. weight max. in kg: 700 kg Professional workbench / tool trolley Internal dimensions of the top left 3 drawers 395 x 395 x 65 mm. Internal dimensions of the middle 3 drawers 815 x 395 x 65 mm. Internal dimensions of the top right 3 drawers 395 x 395 x 65 mm. Internal dimensions of the left 4th drawer 395 x 395 x 140 mm. Inner dimensions of the middle 4th drawer 815 x 395 x 140 mm. Internal dimensions of the right 4th drawer 395 x 395 x 140 mm. Internal dimensions of the left 5th drawer 395 x 395 x 220 mm. Inner dimensions of the middle 5th drawer 815 x 395 x 220 mm. Internal dimensions of the right 5th drawer 395 x 395 x 220 mm. Dimensions of the wheels 150 x 40 mm. Solid wood panel thickness 40 mm. Packaging dimensions 189 x 55 x 80 cm. 4 x 150 mm swivel castor 2x with brake. 2 x robust solid stainless steel handle. 1 x central lockin ...

Tool holder, milling holder, milling tool -Number: 58x SK40 mounts -different designs -partly with pull studs -Spindle tools: different diameters -Sale: only complete -Weight: 108 kg

Machine vice, vise, drill press vise -Jaw width: 160 mm -Jaw height: 50 mm -Clamping depth: max. 105 mm -Dimensions: 460/163/H123 mm -Weight: 38.3 kg

Profile steel shears, hand lever shears, hand sheet metal shears, sheet metal shears, sheet metal shears -Scissors: 185 mm -cutting: 40 mm angle iron -cutting: Ø mm round steel -Dimensions: 460/985/H2220 mm -Weight: 88 kg

Hobs, tooth gear hobs for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 1.5 1454 HSS / Co TGL 29-8002 Bore Ø 22 mm New !' Dimensions: 54 x 54 x 38 mm

range L-W-H: 1350 x 485 x 950 mm weight: 107 kg : 7 St. Professional stainless steel tool trolley with wooden top. Overall dimensions 135 x 48.5 x 95 cm. Internal dimensions of the top 4 drawers 690 x 395 x 60 mm. Internal dimensions of the 5th La 1100 x 395 x 60 mm. Internal dimensions of the 6th and 7th drawers 1100 x 395 x 100 mm. Internal dimensions of the shelf behind the door 420 x 440 x 350 mm. Drawer opening 90% Wheel dimensions 150 x 40 mm. Solid wood panel thickness 40 mm. Packaging dimensions 124 x 55 x 81 cm. Weight 107kg. 2 x Separate lock for drawers and door. 8 x blue storage compartments in the bottom 2 drawers. Door with magnetic closure. Non-slip mat in each drawer. Solid ball bearing slides. (double bearing) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool -Quantity: 4x recording SK40 -1x Ø: 16 x 19 mm -1x Ø: 16 x 25 mm -1x Ø: 27 x 25 mm -1x: drill chuck - is only sold complete -Weight: 6kg

Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: Ø 32 -Clamping sleeves: 4/6/10/12/14 mm -Price/Sale: complete -Total weight: 1 kg

Three-jaw chuck, three-jaw lathe chuck -Clamping plate -Mouth size: Ø 160 mm -Quantity: 2x food available Price: per piece -Weight: 7 kg

Three-jaw chuck, three-jaw lathe chuck -DH200x3-III -TGL: 30-2332 -Mouth size: Ø 200 mm -Recess: Ø 155 mm -Bolt circle: Ø 174 mm -Through hole: Ø 57 mm -Weight: 12 kg

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS) Type K Module 2 2109 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 62 x 62 x 48 mm

table length: 2000 mm table width: 1000 mm table height: 920 - 1000 mm weight of the machine ca.: 0,45 t Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Height adjustable from approx. 920 - 1000mm Ribbed bottom for reinforcement. including floor storage Accessories optional Accessories shown are optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: WMW, live centering tip, 2 pieces -Type: ZN 205 -Recording: MK5 -Price/Sale: complete -Overall dimensions: 270/190/100 mm -Weight: 10 kg

Shell cutters, shell cutters, milling cutters, shell-type milling cutters -Manufacturer: WMW, shell mill -Inside: Ø 32/14 mm -Dimension: Ø 96 x 47 mm -Weight: 1.5 kg

fixed point, fixed center point, fixed morse taper, fixed centering point, centering points -Manufacturer: WMW ABW, fixed center point -Adjustment: Morse taper MK5 -Number: 9x center points available -Price per piece -Dimensions: Ø 46/200 mm -Weight: 1.9 kg / pc.