wm used for sale

WMA WMP 08 One-Handed Bumper Air-cooled single-lever butt system for vehicle construction, tank construction, steel cabinet construction, sheet metal processing and wire industry - problem-free welding of all sheet metal - Galvanized sheets can be welded flawlessly by controlled current increase and current reduction - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardised rotary connections - Only one plug each for welding power line, control cable and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Easy and pleasant to use - All set parameters and process variables can be read at a glance - Changes to welding parameters only for authorized personnel - Management of configuration a ...

Description: Bench drill CE-tested spindle hood. Keyless chuck (1 to 16 mm) Tilting work table. Depth stop. Drilling capacity in steel 20 mm Projection 180 mm Drilling stroke 82 mm Speed 220-2840 rpm Table 290 x 290 mm Total power requirement 0.55 / 0.75 kW / volt Machine weight approx. 54 kg Dimensions L x W x H 820 x 500 x 290 mm Approx. Onsite Dimension. (l x w x h): 820 x 500 x 290 mm, weight approx.: 54 kg

Description: Workbench with 5 drawers, 1 door and solid wood worktop Dimensions 1200x600x25mm Drawer dimensions (internal) 430 x 400 x 110 mm Door dimensions 460 x 380 mm Length 1200mm Width 600mm Dimensions L x W x H 1200 x 600 x 400 m Weight 47kg weight approx.: 47 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 600 x 400 mm

Description: Workbench with drawer block Dimensions of the entire drawer unit 66 x 40 x 35 cm. Dimensions of the individual drawers 59 x 35 x 4 cm. Length 1560 mm Width 760 mm Height above floor 880 - 920 mm Weight 70 kg weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 500 mm

Description: Workbench with 8 drawers and solid wood worktop Dimensions 1200x600x25mm Drawer dimensions (internal) 430 x 400 x 110 mm Length 1200mm Width 600mm Height above floor 860 mm Dimensions L x W x H 1200 x 600 x 400 m Weight 49kg weight approx.: 49 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 600 x 400 mm

Description: Total dimensions including back panel 115 x 61 x 140 cm. Internal dimensions of the top 2 drawers 44 x 40 x 9 cm. Inner dimensions of the lower drawer 92 x 40 x 9 cm. Lower shelf dimensions 115 x 65 cm. Dimensions of the tool board with holes for hooks 115 x 50 cm. LED fluorescent beam width 50 mm. Power of the LED fluorescent tube 9 watts. Length 1150mm Width 610mm Height above floor 910 mm Table load max. 450 kg Dimensions L x W x H 1170 x 640 x 135 m Weight 47kg weight approx.: 47 kg, Approx. Onsite Dimension. (l x w x h): 1,170 x 640 x 135 mm

Description: mobile machine base Adjustable support surface: Minimum dimensions: 470 x 590 mm Maximum dimensions 740 x 860 mm 4 wheels, including 2 swivel castors with locking device for secure locking of the frame Load capacity 600 kg Wheel diameter 75 mm Weight 15 kg Dimensions L x W x H 700 x 400 x 150mm Approx. Onsite Dimension. (l x w x h): 700 x 400 x 150 mm, weight approx.: 15 kg

Description: Workshop trolley with 30 mm thick solid wood panel. Solid drawers with ball bearings (double bearings) All drawers can be opened 100%. Equipped with scratch and impact resistant powder coating. Each drawer is equipped with an anti-slip mat. All drawers are equipped with a drawer lock. The doors have a magnetic lock and lock. Tool trolley is equipped with 10 drawers and a cabinet with 2 doors. 2 x 125 mm. Heavy swivel castor with brake. 2 x 125 mm. Heavy firm roles. 1 x robust handle made of solid steel. 3 x lock for all drawers and doors. Number of drawers 10 pieces Dead weight 162 kg Dimensions L-W-H 1200 x 800 x 1050 mm Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,050 mm, weight approx.: 162 kg

Description: Mobile tool trolley, scope of delivery: Workbench with wooden worktop 2 x 125 mm. Heavy duty castors with brakes. 2 x 125 mm. Heavy fixed roles. 1 x robust handle made of solid steel. 1 x 2 buttons. Very nice solid wood panel. Solid ball bearing guides. (Double bearing) The drawer can be opened 100% Dimensions of the drawer 108 x 410 x 14 cm. Load capacity of the drawer 30Kg. Dimensions of the doors 520 x 460mm Dimensions L-W-H 1250 x 535 x 845 mm Weight 74 kg Number of drawers 1 pc. Approx. Onsite Dimension. (l x w x h): 1,250 x 535 x 845 mm, weight approx.: 74 kg

Description: Workshop trolley with 20 pcs. Drawers and 40mm solid wood panel Fixed ball bearing guides (double bearings), anti-slip mat in each compartment, Thick rubber top mat, central locking, 6 heavy duty wheels 125 mm. including 4 swivel castors with brakes, central locking for all drawers. Anti-slip mat in each compartment. Solid ball bearing guides for the drawers. (Double stored) All drawers can be opened 100%. Approx. Onsite Dimension. (l x w x h): 1,610 x 460 x 920 mm, weight approx.: 93,5 kg

Description: Professional tool cart / workbench Included as standard. 4 x 150 mm. Heavy duty rollers of 2 with brake. 2 x Robust solid steel handle. 2 x separate locks for drawers and doors. 9 x compartment divider in the top drawer. (18 compartments can be created with it become) 4 x tray blue in the right second drawer. Door with magnetic closure. Anti-slip mat in each compartment. Very nice solid wood panel. Fixed ball bearing guides. (Double bearing) All drawers can be opened 100%. Dimensions including wheels and handgrips 170 x 48.5 x 95 cm. Total dimensions without wheels and handles 152 x 48.5 x 76 cm. Internal dimensions of the upper drawer 1390 x 360 x 60 mm. Interior dimensions of the right second la 910 x 380 x 90 cm. Internal dimensions of the left 2nd, 3rd and 4th la 440 x 380 x 90 mm. Interior dimensions of the left fifth la 440 x 380 x 210 mm. Interior dimensions of the sh ...

Description: Professional tool trolley / workbench with wooden top Inside dimensions of the top left 3 drawers 395 x 395 x 65 mm. Inner dimensions of the middle upper 3 drawers 815 x 395 x 65 mm. Inner dimensions of the top right 3 drawers 395 x 395 x 65 mm. Inside dimensions of the 4th drawer on the left 395 x 395 x 140 mm. Inner dimensions of the middle 4th drawer 815 x 395 x 140 mm. Inside dimensions of the 4th right drawer 395 x 395 x 140 mm. Inner dimensions of the left 5th la 395 x 395 x 220 mm. Inner dimensions of the middle 5th drawer 815 x 395 x 220 mm. Inner dimensions of the right 5th la 395 x 395 x 220 mm. Dimensions of the wheels 150 x 40 mm. Solid wood panel thickness 40 mm. Package dimensions 189 x 55 x 80 cm. Weight 170 kg. The HBM 182 is supplied as standard with: 2 x 150 mm. High-performance swivel castor with brake. 2 x 150 mm. High performance steering wheel. 2 x robu ...

Description: Tool trolley: Equipped with 4 heavy duty casters, two with brake. Heavy duty wheels 150 x 40 mm. All drawers are equipped with anti-slip mats. Equipped with 2 robust stainless steel handles. A lock for the door and 1 lock for all drawers. Solid wood panel, 4 cm thick. Solid ball bearing guides (double bearings) for the drawers. 10 drawers, 12 storage bins, 13 hooks. Dimensions L B H 2300 x510 x 1500 mm Weight 145 kg Number of drawers 20 St. Approx. Onsite Dimension. (l x w x h): 2,300 x 600 x 1,500 mm, weight approx.: 150 kg

Description: Professional workbench / tool trolley Dimensions of the upper drawers 1240 x 400 x 100mm. Middle drawer dimensions 770 x 400 x 60mm. Cabinet dimensions 500 x 420 x 540mm Dimensions of the tool wall 1050 x 610mm. Dimensions of the wall cupboards 2 pcs. 680 x 280 x 350mm. 4 rolls of 125 x 50 mm each. 4 x hanging storage containers of 10.5 x 14 x 7.5 cm. 3 x hanging storage containers of 14 x 22 x 12 cm. 2 x steel containers of 33 x 10 x 10 cm. 2 x U-hooks 55 x 25 x 6 mm. for tool wall. 4 x double hooks 85 x 6 mm for tool wall. 2 x universal hanging frame 37 cm. Wide. 2 x hanging racks for socket wrenches. Approx. Onsite Dimension. (l x w x h): 1,360 x 500 x 1,970 mm, weight approx.: 115 kg

Description: Tool trolley Equipped with 4 high-performance castors, 2pcs. with brake. Heavy duty wheels 125 x 40 mm. All drawers are equipped with anti-slip mats. Equipped with 2 robust stainless steel handles. All cupboards and drawers can be locked individually. Solid wood panel 4 cm thick. Fixed ball bearing guides. The lower drawer has a double ladder. Solid ball bearing guides (double bearings) for the drawers 4 drawers 3 pieces of cupboards with lockable doors. CAUTION! Version in black. Dimensions L-W-H 1380 x 610 x 180 mm Weight 139 kg Number of drawers 4 pieces Package size max. 1280 x 680 x 80 cm Approx. Onsite Dimension. (l x w x h): 1,280 x 680 x 800 mm, weight approx.: 140 kg

Description: Mobile tool trolley, scope of delivery: Workbench with wooden worktop 2 x 125 mm. Heavy duty castors with brakes. 2 x 125 mm. Heavy fixed roles. 1 x sturdy handle made of solid steel. 1 x central locking for all drawers. 1 x 2 buttons. Very nice solid wood panel. Solid ball-bearing guides. (Double bearing) All drawers can be opened 100%. Internal dimensions of the upper wide drawer 105 x 40 x 10 cm. Inner dimensions of the upper 6 narrow drawers 49 x 40 x 7 cm. Inner dimensions of the lower 2 narrow drawers 49 x 40 x 23.5 cm. Number of drawers 9 St. Approx. Onsite Dimension. (l x w x h): 1,250 x 460 x 940 mm, weight approx.: 88 kg

Description: Workbench with: - 40 mm MFD wooden board - 4 pcs. Adjustable feet Length 1524 mm Width 650 mm Height above floor 885 mm Table load max. 1000 kg Approx. Onsite Dimension. (l x w x h): 1,530 x 650 x 880 mm, weight approx.: 62 kg

Description: Mobile tool trolley, scope of delivery: Workbench with wooden worktop 2 x 125mm Heavy duty casters with brakes. 2 x 125mm Heavy fixed castors. 1 x Heavy Duty Solid Steel Handle 1 x central locking for all drawers. 1 x 2 buttons. Very nice solid wood panel. Massive ball bearing guides. (double bearing) Drawer can be opened 100% Drawer dimensions 108 x 410 x 14 cm. Load capacity of the drawer 30 kg. Dimensions of the doors 520 x 460mm Dimensions L-W-H 1250 x 535 x 845 mm Weight 74kg Approx. Onsite Dimension. (l x w x h): 1,250 x 535 x 845 mm, weight approx.: 74 kg

Description: Workbench: - Links with door 450x500x5500m - right 3 drawers 420x420x160mm (opening 100%) - 40 mm wooden plate - 4 adjustable feet Length 1200 mm Width 600 mm Height over floor 865 mm Weight 70 Kg Approx. Onsite Dimension. (l x w x h): 1,400 x 700 x 900 mm, weight approx.: 70 kg

Description: Professional tool trolley with wooden top. Overall dimensions 135 x 48.5 x 95 cm. Internal dimensions of the top 4 drawers 690 x 395 x 60 mm. Internal dimensions of the 5th La 1100 x 395 x 60 mm. Internal dimensions of the 6th and 7th drawers 1100 x 395 x 100 mm. Internal dimensions of the shelf behind the door 420 x 440 x 350 mm. Drawer opening 90% Wheel dimensions 150 x 40 mm. Solid wood panel thickness 40 mm. Packaging dimensions 124 x 55 x 81 cm. Weight 107kg. 2 x Separate lock for drawers and door. 8 x blue storage compartments in the bottom 2 drawers. Door with magnetic closure. Non-slip mat in each drawer. Solid ball bearing slides. (double bearing) Dimensions L-W-H 1350 x 485 x 950 mm Weight 107kg Number of drawers 7 pieces. Approx. Onsite Dimension. (l x w x h): 1,350 x 485 x 950 mm, weight approx.: 107 kg

Description: Heavy duty castors, 2 parts Total load capacity 24t. with turntable Load capacity 2 x 12000 kg Wheel diameter 75 mm Total height 105 mm Weight 40kg Dimensions L x W x H 500 x 300 x 250 mm Approx. Onsite Dimension. (l x w x h): 500 x 300 x 250 mm, weight approx.: 40 kg

Technical data: 2000 overtaken Turning diameter over bed: 1350 mm Turning diameter via slide: 1250 mm Sheet: 1350 mm Clamping on the flat disc: 300-900 mm Turning length: 5000/6000 mm

Radial drilling machine, used radial drilling m/c, used Type: BR 56 x 1600 Manufacturer/ make: WMW Year built/ year of make: 1965 Extension/ length of arm: 300...1600 mm Ma. Drilling radius / max. drill. Radius: 1800 mm Drilling capacity at boring: 56 mm ( St 60 ) Drilling capacity at boring: 80 mm ( GGL 20 ) Thread cutting/ thread cutting: max. 65 mm ( St 36 ) 76 mm ( GGL 20 ) Drilling depth/ drilling depth: 400 mm Tool holder / taper in spindle: MK 5 Removal spindle head to base plate/ distance Spindle head to base: max. 1600 mm Base plate/ base: 1700 x 1000 mm Speed range/ range of speeds: 14..1800 rpm Feed: 0.0315 .. 1.6 mm/U// mm per round Connection value: 7.13kW Weight: about 4.5 t

THREE ROLL BLECHBIEGEMASCH. m. conical bending and in turn, used three rollers bending m/c with conical and prebending, used Typ / type: UBBDA 32 x 2000 Manufacturer / make: heavy machinery Wildau Baujahr/ new: 1984 Workspace, sheet width max. / maximum working length: 2000-.2100 mm maximum sheet thickness maximum sheet width rounding (cold) / Max sheet thickness at max.working length at bending(cold): 32 mm (270 MPa) On bending (cold) /. at prebending(cold): 23 mm Smallest sheet metal thickness maximum sheet width /. min. sheet thickness at maximum working length: 4 mm Bending rolls / bending rollers: top: 1 piece, bottom: 2 PCs Driven / driven: 2 bottom rollers / bottom rollers upper roll diameter / diameter of top roller: 382 mm Under Roll diameter / diame ...

Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm

We can offer several thread rolling machines with cylindrical dies, any size.

Extension / distance slide center to frame: 320 mm Sheet thickness / sheet thickness: 3.2 mm Cutting surface / cutting capacity: 1600 mmx2 Distance table pestle/ distance table slide: 417 mm Stroke adjustment / adjustment of stroke: 16...125 mm Stroke number/ number of strokes: 45 / min Pestle adjustable/adjustment of slide: 80 mm Table size / surface of bed: 800 x 630 mm Bumper size / surface of ram: 500 x 400 mm Slope of the stand / inclination of coulmn: 25 Power of main motor power: 4 kW Weight: 2.5 Specification: C-frame punching press, used

Hand spindle press, used Balancier, used Type: PSHZ 25/I Pressing force / rated pressure: 25 t Stroke/ stroke: 250 mm Table size/ table size: 400x 500 mm Stössel/ ram: 200 x 500 mm Table opening / hole in table: 140 mm Weight: 0.9t

Force of pressure: 40 t projection: 250 mm table size: 440 x 530 mm Durchfalloch in the table: 170 Ø mm table adjustment: 220 mm plunger surface: 200 x 280 mm slide adjustment: 60 mm stroke adjustment: 8-80 mm stroke rate: 100 / min drive motor: 380 V, 2.5 kW space: 950 x 1450 x 2050 mm weight: 2400 kg

unused counter-holder for horizontal fraesening for WMW FQ400CNC The gnholder has a counter bearing for the reception of the long fraesdorne. Special price

Various sub-equipment from a training workshop, to hand over individually, e.g. lid sub-device with upper beam and counter holder, Universal part apparatus with initial division Walter UTA150E with counter holder and rotary chuck 3 partial discs with parts see above, Part apparatus Walter can be swivelled without initial division. Furthermore Luenetten standing and running, on request please Specify the tip height and distance mid prism to mid plan area. Rest according to photo. Other sub-equipment susengar, Direct division Indirect division, various large sum. Please ask Sub-discs for UTA 150 E 22 24 29 36 37 49 57 63 16 30 33 36 39 51 57 63 16 27 30 33 41 47 53 61 Special price

Screen area: 1,400 x 4,250 mm, very heavy and stable machine, polyurethane sieves, upper deck: 40 x 40 mm

Technical data: Double column vertical turret lathe CNC control Siemens 802 D Weight 66 to 63 kw Dimensions 13,600 x 9,800 x 6,750 mm Faceplate diameter 3,500 mm Maximum workpiece height 2000 mm Max support adjustment 30 ° Maximum workpiece diameter 4,000 mm Maximum workpiece diameter with page support 3,750 mm Number of support 2 Max turning height 1,400 mm Maximum workpiece weight 25 to Max speed 30/min Min. speed 1/min

Horizontal round table - with bearing tracks Bearing tracks can be easily removed, Geraet fully ready for use without restrictions! Diameter 600mm construction height 140mm Partial setup via angular scale It's immediately available. Further horizontal parts available, please ask price. If you are not able to see what you need, please ask, we have not put the whole stock in place and probably the right one in stock. - Diameter 500mm built-in height 120mm with direct pitch over cam and angle scale - 2 pcs. diameter 400mm, can be used horizontally and vertically, indirect pitch for discs, once as good as new, once with bearing tracks Vertical sub-cameras and universal horizontal / Vertical pivoting sub-cameras 1. Walter with three-jaw lining 2. Lid with three-jaw lining and counter holder Special price

Universal tool-feeding machine, used universal milling machine, used Type FU 250 x 1000/2 Fabr. WMW Auerbach Built: 1988 Table size/ table: 1130 x 255 mm Laengsmotion/ longit. move: X 690 mm Horizontal movement/ horiz. Move: Y 190 mm Vertical movement/ Vert. move : Z 360 mm Tool holder/taper: ISO 40 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 56 - 2800 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t Specification: Vertical head,shock head

: 8 St. range L-W-H: 720 x 580 x 1000 mm weight: 128 kg : 100Kg je Lade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6 St. range L-W-H: 720 x 580 x 800 mm weight: 100 kg : 100Kg je Lade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table diameter: 2000 mm Turning diameter: 1800 mm Turning height: 1250 mm Motor power: 35 HP/kW Positions ATC: 0   Positions APC: 0   MACH-id   4306 MAKE       WMW TYPE         DKZ 2000 x 1250 B YEAR         1976 SPECIFICATIONS Max. turning diamter  Ø  2000 mm Table / chuck size Ø     1800 mm Workpiece height     1250 mm Work piece weight   6000 Kg Horizontal movement support / ram    1150 mm Stroke support left ram      700 mm Stroke support right ram    700 mm Angle adjustment / ram swivable     30 Spindle speeds / ranges      50 Rpm Power     35 Kw DIMENSIONS Length      4100 mm Width       5300 mm Heig ...

Tip height: 1250 mm Turning diameter: 2,500 mm over bed Centre distance: 4.000 mm Support motion: 750 mm longitudinal feeds 630 mm cross feeds Face plate: Ã? 1250 mm Spindle speed: 5.6-280 RPM. Spindle bore: 100 mm Workpiece weight: 10.000 kg Equipped with: -Floor plates 4.500 x 2.200 mm -Powered tailstock -Operating instructions Country of origin: Germany Engine power: 45 kW Machine weight: 18,000 kg Machine Lxwxh: 8,000 x 4,000 x 2,100 mm

Gear column drilling machine make WMW VEB Saalfeld type BS 25BMachine -No: 9587/59Technical specifications:Drilling capacity in steel - diameter: 4 - 32 mmThread cutting ST 60 / Alu up to: M 20 / M 32Spindle mount: MK 3Throat: 280 mmDrilling stroke: 150 mm4 spindle speeds: 125 - 710 rpm.4 feed rates: 0.10 / 0.16 / 0.25Table size with channel: 570 x 475 mmTable size clamping surface: 450 x 355 mmDrive power: 3 kWWeight: 700 kgExternal dimensions: 900 x 570 x 2400 mmWith- automatic feeds- Thread cutting with compensating chuck- machine light- Emergency stop switch- separate cooling deviceused, in working conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine ...

see picture for data. Table hoehen-adjustable. mass approx.: 1.55 x 0.8 x 2.1 m high

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Hydr. Universal Cylindrical Grinding Machine WMW SU 240×800 manufacturer: WMW SU 240×800 build type: Reinecker type: SU 240×800 mach.-nr.: 02910 year of construction: ? comm.-nr.: 3990699/009 stock-nr.: 1865 + Regular Price: 5.800,- € > Reduced Price: 2.900,- € BN + All prices are shown without taxes (net price) The machine can be used for: outer grinding surface grinding cone grinding edge grinding chamfering plunge grinding Technical Data (According to manufacturer) height of tip: 120 mm swing – Ø: 240 mm width of tip: 800 mm grinding wheel: diameter: 300 mm bore diameter: 76 mm max. width of full grinding wheel during ...

Single Column Coordinate Drilling Machine Fabr. WMW Mikromat Type BKoE 400 x 630/1Mash. -No: 1203.14.44for single, small and medium batch production of high quality gauges, fixturesTools and workpieces with tight tolerance requirementsTable size: 630 x 400 mmTable feeds: 63/160/400/1000 mm / min19 spindle speeds: 45 - 2800 rpm.Spindle feed: 0.014 - 0.5 mm / revHeadstock feed: 0.006 - 0.22 mm / revDrilling spindle stroke: 100 mmSpindle diameter: 80 mmTool holder: MK 3Distance between table and spindle: 40 - 560 mmAdjustments along: 400 mmtransverse: 250 mmvertical: 420 mmExternal dimensions approx: 2190 x 2010 x 2330 mm highWeight: 2.3 tWith:- 2-axis digital display- Angle drill head- 1 set of tool holders- 1 microscopeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding ...

Tool-fraes machine Ruhla with very extensive trailer to be seen in top condition under electricity Type FUW Built in 1986 Tool holder SK40 stepless feed control Speed control via gearbox Weight approx. 1,800kg Accessories: Box table Quick-aeuferkopf with collet holder and collet set Fine drilling head with collet holder horizontal sub-apparatus universal sub-device SK40 with spiral-fraes device (probably unused) D2evxjf Counter-holder for horizontal fraes long fray edhism 2 stueck Further accessories at an additional cost. Special price

Band width 250 mm, stuffenlos adjustable speed Btto 600 kg

3-spindle line boring machine

Internal circular grinding machine with plan grinding equipment, second-hand internal and face grinding machine, used Type / type: SI 6/1 x 315 Manufacturer / make: WMW Year / year of make: 1983 schleifbarer the protection of workpiece diameter / grinding diameter: inner / internal 20... 400 mm; outside / external 500 mm maximum workpiece diameter workpiece protection /. maximum diameter of work piece: 500 mm Max grinding depth / maximum grinding length: 315 mm schleifbarer angle of cone / cone grinding: 60 ° Internal grinding motor power / power drive motor grinding of internal: 7,5 kW Internal grinding spindle speeds / rev's of internal grinding spindle: 2640... 16500 RPM Power cylindrical grinding device / power drive of face grinding attachment: 4 kW Power work-piece motor / power drive of workpiece engine: 1.5 kW Workpiece spindle speeds / rev's piece of work s ...

Surface grinding machine make WMW type SFW 200 x 600Fabr -No: 330690Technical specifications:Working area: 200 x 600 mmgr. adjustment in Y-direction: 230 mmgr. adjustment in X-direction: 690 mmgr. Distance between worktable and spindle center: 500 mmUsable table surface: 200 x 600 mmpermitted table load: 110 kpTable speed stepless: 2 - 18 m / minGrinding wheel size: 200 x 20 x 51 mmelectrical connection: 3 kWGrinding spindle drive: 1.1 kWOutside dimensions approx: 1500 x 1700 x 1900 mmWeight approx: 1.01 tWith- Electromagnetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC vertical jig boring machine WMW MIKROMAT Type BKoZ 900x1400/5NC Travel X 1120 mm Travel Y 710 mm Spindle travel Z 315 mm Travel W 630 mm Numerical Command CNC NUM 1060 Spindle Ø 125 mm Cone SA40 Rotation from 36 to 2240 RPM Table size 1400 x 900 mm Distance between colums 1080 mm Maxi distance spindle nose/table from 0 to 900 mm max Maxi eligible load on table 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage 380 V Dimensions (L x W x H) 4000 x 2460 x 3030 mm Weight approx. 9 T MACHINE IN OUR STOCK IN FRANCE.