129,353 used machines on RESALE, but how to find them? Machine Search
Holder for tapping head WMW Z39 Outer diameter: 180 mm Inner diameter: 45 mm Dimensions: 180 x 180 x 125 mm
Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 176 teeth -Number: 20x saw blades available -Price: per piece -Weight: 10 kg/piece
Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm -Number of teeth: 160 teeth -Number: 8x saw blades available -Price: per piece -Weight: 6 kg/piece
Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St G K04/0412 Nominal pressure: 1 MPa (10 bar) Nominal diameter: 6 mm Wegevenil ORSTA 6-0.0 1 TGL 20705 ED 100 24 V DC used, tested ! Dimensions: 230 x 130 x 180 mm
Boring tool, optional accessories WMW TGL 30-1201 ( TGL30-1201 ) Dimensions: 185 x 120 x 55 mm
Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 18 mm -Number of teeth: 120 teeth -Weight: 6 kg
Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St G K04/0410 Nominal pressure: 10 kp/cm² (10 bar) Nominal diameter: 6 mm Wegevenil ORSTA 6-0.1 TGL 20705 ED 100 220 V AC used, tested ! Dimensions: 230 x 130 x 170 mm
Boring tool, optional accessories WMW TGL 32680 ( TGL32680 ) shank: Ø 20 mm Adapter: Ø 8, 10, 12 mm Dimensions: 185 x 120 x 55 mm
Control unit, combined control unit for pneumatic clamping devices WMW, SPEZIAL-WERKZEUGFABRIK ZELLA-MEHLIS St GK 04/0400 Nominal pressure: 10 kp/cm² (10 bar) Nominal diameter: 6 mm hand levervenil ORSTA 6-0.1 TGL 20705 used, tested !' Dimensions: 240 x 130 x 240 mm
Centering tip, lathe tip WMW ZN 206 ( ZN206 ) Ø 140 mm MK 6 used, tested ! Dimensions: 380 x 140 x 140 mm
Tool grinding machine WMW SWA 200 grinding diameter max Ø 600 mm grinding length max 470 mm table movement longitudinally 470 mm Tool holder MK2 swivel 0-6 °, 90° Speed range: 1260 - 3100 rpm 0,0.0 4 kW 220 / 380 V used, tested ! Dimensions: 1100 x 1100 x 1500 mm
Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm - Bolt circle: Ø 100 x 17 mm -Number of teeth: 80 teeth -Number: 4x available -Price per piece -Weight: 5.7kg/pcs
Quill for jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Stroke: 60 mm -in: a wooden box -Dimensions: 390/340/H170 mm -Weight: 15.8 kg
Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: WMW Heckert, rotary table type D 315 k TGL 28561/02 -Clamping surface: O 315 mm -Height: 140 mm -Groove: 14 mm -Dimensions: 615/540 / H150 mm -Weight: 83 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Weight: 18 kg
Pneumatic grinder, pneumatic straight grinder WMW type 1804 17000 rpm grinding wheel diameter: Ø 50 mm with approx. 1.6 m connection hose used, tested ! Dimensions: 330 x 50 x 80 mm
Scribing apparatus WMW D45 751.04.453 New ! Dimensions: 200 x 60 x 60 mm
Tool holder, milling holder, milling tool -Number: 7x SK40 mounts with tool carrier -Executions: different -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills -Sale: only complete -Dimensions: 590/120/H210 mm -Weight: 12 kg
Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck -Mouth size: Ø 250 mm -Recess: Ø 230 mm -Bolt circle: Ø 200 mm -Quantity: 2 available -Price: per piece -Weight: 35 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Short cone mount for: bayonet disc attachment -Cone size: 6 -Cone: Ø 106 mm -Bolt circle: Ø 133.4 mm -Through hole: Ø 54 mm -Weight: 15 kg
Angle table with adjustable attachment, clamping bracket, T-slot plate WMW - Consists of 2 parts. Clamping surface: 1600 x 850 x 680 / 760 mm Number of grooves: 6 Groove width: 20 / 38 mm Hole spacing at the base: 130 mm Dimensions: 1600 x 850 x 680 / 760 mm
Tapping Machine WMW, ABW GB2 MK 2 M3 - M8 with inserts Ø 2.5 / 3.5 / 4.0 / 4.5 / 5.5 / 6.0 mm used, tested ! Dimensions: 250 x 95 x 65 mm
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -DKRD Ø: 160 mm -Weight: 15.5 kg
3- Jaw Chuck WMW NILES DHK 200x3 Outer Ø: 200 mm Flange: 155 mm Bore Ø: 60 mm Bolt circle: 175 mm Height with jaws: 125 mm Chuck number: 507 Dimensions: 200 x 200 x 125 mm
Inv. Num. : 8171 Type: UDARA 10 Producer: WMW Created: GO 2019 Parameters: Wire diameter: 3-8 mm Cable length: 150-3000 mm Input power: 7.5 kW Machine weight: 1200 kg
three-jaw chuck, three-jaw lathe chuck -Handover: in current condition as viewed -Short cone: has been shortened -Chuck size: Ø 200 mm -Through hole: Ø 54 mm -Hole: cone Ø 104.5 mm -as per pictures, without additional accessories -Weight 14.4 kg
three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 139 mm -Bolt circle: Ø 170 mm -Through hole: Ø 80 mm -Weight: 24 kg
Saw blade for metal circular saw, segment saw blade WMW Ø 710 mm tooth 6 96 teeth tooth 6 width: 4.0 mm hole holder inner diameter: 80 mm bolt circle of the 4 holes: 160 mm Dimensions: 710 x 710 x 4 mm,
faceplate diameter: 3500 mm turning diameter: 4000 mm centre distance: 16000 mm turning speeds: 0,71-33,5 U/min Rest: 2 tailstock quill taper MT: max. workpiece weight -without tailstock: 6300 kg max. workpiece weight between centres: 18000 kg Plate area: mm total power requirement: 31 kW weight of the machine ca.: 60 t dimensions of the machine ca.: 22x5x4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Reamer, twist drill, drill -Twist drills: different sizes on request -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two-cutter -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS
Bezel, steady rest, lynette -max. passage: Ø 210 mm -Centre height: 390 mm -technical drawing: in the photos -Dimensions: 600/125/H625 mm -Weight: 53.5 kg
Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed -Feed size: Ø 250 mm -Weight: 35.5 kg
Hobs, tooth gear cutters for hobbing machine WMW / PWS Type G Module 3 ( Module3 ) HSS / Co TGL 29-8002 Bore Ø 40 mm New !' Dimensions: 110 x 100 x 100 mm
table diameter: 180 mm : 10 Kg : 5 Kg chucking diameter: 65 mm turning speeds: 2 - 20 stufenlos swivelling range: 90 Grad tilt adjustment: manually/mechanicall: manuell connected load frequency: 230 V weight of the machine ca.: 18 Kg dimensions of the machine ca.: 300 x 300 x 300 m welding turntable with - Quick chuck 65mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
rated capacity: 2,5/2,8 KW rated current: 7,0 Ampere output voltage: 1 x 230V / 1 x 400V V tank capacity: 15 l engine output: 6,5 HP weight of the machine ca.: 55 Kg dimensions of the machine ca.: 0,61 x 0,54 x 0,47 m The WMT SL 3000 is a powerful and reliable 2.8 KW generator. A durable and energy efficient 4-stroke engine with 6.5 hp reliable backup power for the home, office or small workshop. Outputs: 1 x 230 volt/ 1 phase Schuko socket 1 x 400 volt/ 3-phase CEE socket 1 x 12 volt (8.3A) DC output. RCA plug Pack size 610 x 540 x 470mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Feed size: Ø 200 m -Through hole: Ø 54 mm -Weight: 12 kg
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -TGL: 30-2312 -Weight: 11.2 kg
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: 200x3-III -TGL: 30-2332 -Chuck size: Ø 200 mm -Weight: 16.7 kg
Hobs, tooth gear milling machine for hobbing machine WMW / PWS type G module 1.5 HSS / Co TGL 29-8002 bore Ø 27 mm New !' Dimensions: 58 x 69 x 69 mm
max. wheel diameter: 400 mm gear width: 275 mm max. module: 6 Overall size: 300x330x245 cm weight of the machine ca.: 5,5 t dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min Specification: Max wheel diameter: 400 mm Min module: 1 Max module: 6 Table diameter: 370 mm Max wheel diameter: -With counterstay: 340 mm -Without counterstay: 400 mm Max axial offset: 275 mm Max tangential adjustment: 100 mm Tooth helical angle: 45 degrees Max cutter diameter: 145 mm Max hobbing length: 170 mm Hob turning speeds capacity: 63-180 U/min Feeds infinitely variable axial: 0,2-10 mm/U Feeds infinitely variable tangential: 0,1-5 mm/U Radial for spur gears: 0,1-4 mm/U Radial for worm gears: 0,025-1 mm/U Rapid traverse axial: 500 mm/min Rapid traverse tangential: 250 mm/min Radial for spur gears: 400 mm/U Radial for worm gears: 100 mm/U Motor power: 7.4 kW The data for t ...
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: B200x3x6 -TGL: 30-2332 -Chuck size: Ø 200 mm -Cone: Ø 104 mm -Hole circle: Ø 132 mm -Through hole: Ø 54 mm -Weight: 15 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Mounting thread: M20 -Gradient: 2.5 mm -Weight: 32 kg
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess: Ø 210 mm -Passage: Ø 80 mm -Weight: 20.7 kg
Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 2,25 1575 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 70 x 70 x 58 mm
Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg
Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1.5 1844 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 69 x 69 x 58 mm
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Short taper: 6 -Throughout: Ø 80 mm -Weight: 25.9 kg
Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Admission thread: M40 -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg
maximum number of results exceeded
please refine your search
