wm used for sale

Key data: 460 mm, 10

BEVEL GEAR SPIRAL GENERATOR

width: 920 mm depth: 420 mm height: 1950 mm weight: 70 Kg Practical tool cabinet with 4 shelves Color RAL 6035 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 850 mm, 270 mm, 355 mm

Table width 315 mm, table length 1250 mm Tool holder SK 50 Speed range 28 - 1400 rpm Feed range 16 - 800 mm/min Travel x=850 mm, y= 270 mm, z=355 mm Connected load 8 kW Incl. Electric clamp horizontal Vertical head in X swivel with manual tightening Dispensing as present, no longer energized

: 30000 kg length: 7000 mm width: 2450 mm height: 800 mm : lenkbar : lenkbar size of tyres: 425 x 260 / 2-fach mm weight of the machine ca.: 3,2 t dimensions of the machine ca.: 7,9 x 2,5 x 0,823 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 650 Watt tank capacity: 5,5 l length: 515 mm width: 430 mm height: 825 mm weight of the machine ca.: 36 Kg Professional 650 watt construction dryer Recommended room size 40 - 50 m², height max. 2.6 m Sound pressure level approx. 52dB Dehumidification capacity 28 L/D - 51 L/D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 15000 kg length: 10000 mm width: 2450 mm height: 625 mm : lenkbar : lenkbar size of tyres: 425 x 260 mm weight of the machine ca.: 2,9 t dimensions of the machine ca.: ca. 11,7 x 2,5 x 0,625 mm Heavy duty trailer with - Double steering knuckle steering - small turning circle - Tilt-proof because the steering angle is limited - robust, low maintenance - reversible drawbar, length 1320mm - impregnated wooden support. - Standard paintwork changes. On request in your Ral color. Would you like other load capacities and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

WMA WMP 08 One-Handed Bumper Air-cooled single-lever butt system for vehicle construction, tank construction, steel cabinet construction, sheet metal processing and wire industry - problem-free welding of all sheet metal - Galvanized sheets can be welded flawlessly by controlled current increase and current reduction - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardised rotary connections - Only one plug each for welding power line, control cable and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Easy and pleasant to use - All set parameters and process variables can be read at a glance - Changes to welding parameters only for authorized personnel - Management of configuration a ...

Key data: 2000 mm, 10 mm

Sheet metal straightener, partially overhauled       sheet leveller, partly overhauled   Typ/ type:                                � �                                  � �              UBR 10 x 2000 /1-16 WDKS Manufacturer / make: WMW Gotha Year of construction/ year: 1989/2024 electrically overhauled max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Straightening roller diameter/diameter of     Straihgtening rollers: 145 mm Speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Distance between b/n rollers centres: 150 mm Diameter of bottom rollers: 290 mm Number of bottom rollers / number of bottom rollers 21/24 Number of outr ...

4 WAYS PINE-BONE REMOVER, WMT Technical description: Material: Stainless steel Aisi-304 Power supply: 380/440 V - 50/60Hz Mesh width: (x4) 245 mm Working width: (x4) 210 mm Dimensions: 2050 x 1650 x 1650 mm

diameter: 200 mm amount: 6 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max diam 340 , max modul 8

number: 100 Positionen : 28 mm condition: neu weight: 280 kg dimensions: 1,2 x 0,5 x 1,3 m XXL starter package, consisting of: - 15x – standard clamping pliers - 5x – multi-clamp pliers - 10x – side tensioners with eccentrics - 15x – Loose cam H30 - 10x – Loose cam H100 - 2x – pipe insertion cam series - 10x – quick release bolts - 10x – stop block 15mm - 4x – Right Angle XL - 6x – Right angle - 6x – angle of attack - 1x – box - 1x – Insert holder - 1x – Allen key - Tool trolley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

collets: 3 - 20mm tool taper: Sk 430 weight: 4,5 kg dimensions: 350 x 250 x 100 mm Collet set 21 pieces Collets for 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 17, 18, 19, 20mm. Recording SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding lenght 6000 mm Grinding diameter 1050 mm

range L-W-H: 1066 x 460 x 940 mm weight: 80 kg : 12 St. Mobile tool trolley, scope of delivery: Top drawer dimensions 954 x 400 x 134 mm Dimensions of the left drawers 569 x 400 x 75 mm | 569x400x154mm Dimensions of the right drawers 296 x 400 x 75 mm | 296x400x233mm Diameter rolls 12.5 cm Width of rolls 3.2 cm Maximum loadable weight of the large drawer is 35 kg Maximum loadable weight of the narrow drawer is 20 kg Maximum loadable weight of the tool trolley is 350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 180 mm : 10 Kg : 5 Kg chucking diameter: 65 mm turning speeds: 2 - 10 U/min swivelling range: 90 Grad tilt adjustment: manually/mechanicall: manuell connected load frequency: 230 V weight of the machine ca.: 15 Kg dimensions of the machine ca.: 400 x 400 x 400 m welding turntable with - Quick chuck 65mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gearwheel Shaping machine WMW Modul ZSTTK 1250x24

table length: 2000 mm table width: 1000 mm table height: 920 - 1000 mm : 2000 kg height of stroke: max. 1525 mm total connected load: 1,5 kW connected load frequency: 400 V weight of the machine ca.: t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1120 mm, 345 mm, 400 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 1/min Travel X/Y/Z 1120/345/400 mm Feed range X/Y 16 - 800 mm/min, Z 5 - 250 mm/min Rapid traverse Milling head swivel range +/- 45°, quill stroke 90 mm Connected load approx. 14 kW Incl. coolant device Electric tensioner, bracket cover

table length: 1825 mm table width: 660 mm stroke height: 750 mm : 20 mm weight max. in kg: 450 kg weight of the machine ca.: 130 Kg : 2,2 x 0,85n x 0,24 m With the lifting table, medium-sized motorcycles, mopeds and scooters can be easily brought to a comfortable working height. The table is equipped with two hydraulic foot pedals. One for pumping up, one for lowering. Device for attaching the front wheel. Incl. access ramp. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 63 1/min, 25 mm, 200 mm

Manufacturer: WMW Type: BKR 25 x 4 AI Stock number: 1023 Number of Spindles: 4 Spindle spacing: 475 mm Table working surface: 450 mm x 1900 mm Drilling capacity in steel: 25 mm Morse taper of spindle: MK 4 Connected load: 10.2 kW Weight: 3000 kg